VideoStudio :: Losing Clarity In Video Footage After Rendering
Apr 20, 2013
I am using VSX5 and after rendering a project of video, where I have added transitions and titles, the video image is not as clear as it was before I rendered.
I have captured the footage from a mini dv camera using firewire, or, someone else has captured the video footage on a dvd using a dvd burner and given me the dvd to import into VSX5. Sometimes VSX5 will not read that dvd for import, so I have used freemake video converter, and converted the dvd into an mpeg file and put it in a folder on my computer where VSX5 "grabs" it. During the edit phase, the video is clear, after render, it loses some of it's clarity and is blurry.
This has not always been the case. The only thing that has changed with VSX5 is I installed sp2.
View 14 Replies
ADVERTISEMENT
Nov 16, 2010
I have a GoProHD Hero camera, I've been recording stuff mainly in 960p at 30fps because that's all my computer can handle at the moment.
My main problem is that I lose the HD part of the video after edit and render the video in VideoStudio X3. The file type is MPEG4, when I render the final project, I set it to save as the same file type, at 1280x720p with a data rate of 5Mbps all in the H.264 MAIN codec mainly for Youtube uploading purposes.
If I were to upload the raw footage directly to Youtube, it's in true HD and uses the full width of the player when played at 720p. However, when I upload the final project to Youtube even when set to play in HD (720p) it is only in letterbox format.
Am I rendering my projects incorrectly? Why does it keep doing this? Is it some sort of file compression issue or something? I'm pretty new to the whole video editing platform, I'm pretty much learning on my own.
View 11 Replies
View Related
Jul 29, 2011
It seems VS always output a video file with 29.970 fps even if the footage was taken at 24P, 30P. Can video studio output a video that is the same as its capture fps rate?
View 2 Replies
View Related
May 27, 2013
I am confronted with a considerably quality loss when I edited and rendered the material from my Sony HDR-CX130 camcorder. It shoots *.m2ts 1920x1080 at 50i (this is in fact 25 fps, I assume).
The loss is visible when there are moving objects or when the camera moves: very not-fluent and not-smooth movement-representation, while the original footage playbacks fine and smoothly in any mediaplayer (Sony PMB or Windows Mediaplayer).
As if the rendered material has a framerate of 12 fps! Which isn't the case, in fact.
I did some experiments: render to other formats like MPEG, tried it on the laptop of a friend who also has CVS X4 installed (W7 SP1, i5 2,3GHz, 4GB RAM),I used properties of first videoclip (which actually doesn't happen), set camcorder at 50p; all without better results.
Project properties I use in CVS X4:
PAL (25 fps)
Microsoft AVI-files
8 bit, 1920 x 1080, 25 fps
Frame-based
Microsoft Video 1
This I was told here to use in order to get stills that are also 1920 x 1080 in size.[URL]
Is the un-fluent playback of edited AVCHD normal, will it be better in version X6?This is visible when playing back the rendered footage in Sony PMB and WMplayer as well.
View 12 Replies
View Related
Apr 2, 2012
I'm working on a video to propose to my girlfriend with next month, and I have all the edits done and the project is complete (including the DVD menu), but every time I render it it loses quality, and then when I burn a disk it loses even more quality. I'm just burning it onto a standard DVD so I know it won't stay fully HD, but it's pixelated in several parts which really is annoying.
Some details:
Original file properties (.mts):
File Format: NTSC HDMV
Video Type: H.264 Video, Upper Field First
Attributes: 24 bits, 1920 x 1080, 16:9
Frame Rate: 29.970 frames/sec
Data Rate: Variable bit rate (Max. 20899 kbps)
I don't know what camera they were shot on, a friend did the shots for me and I didn't think I'd need to know the camera specs.
I've tried rendering using several of the default options in the Share tab (MPEG Optimizer, DVD, MP4). So far, MP4 has worked the best.
When I burn it to a disk, though, it gets really bad. I tried burning straight from the project and burning from the rendered video file. Burning from the rendered file was less pixelated, but still not as clean as I want it to be.
View 14 Replies
View Related
Aug 26, 2013
I have VideoStudio Pro X2 and my operating system is Windows 7 Home Premium. I'm trying to put together a film, including some sequences which have been filmed on an IPad (I think) for which the aspect ratio is a thin vertical rectangle. I would like to change the shape to a horizontal rectangle by removing segments at the top and bottom.
View 10 Replies
View Related
Dec 19, 2012
I have been using VS11But, I have just bought a new camera, a Panasonic HC V500. A small section of the info on the camera are the following lines:- 2D-to-3D Conversion.The camera processing engine automatically converts your 2D footage to 3D without the need for the optional 3D lens, to then be able to view on your 3D TV for an enhanced viewing experience.
Progressive Video Format for Smooth Action.The Full HD format employed in this model uses 1080/50p (AVCHD Progressive compliant) imaging. The Progressive format carries roughly double the image information of a 1080i interlace signal, minimising flickering and after-images.
As I edit and convert all my video footage into movies, will the latest VS programme retain the 3D conversion ability/facility, if so, what is the latest (or best) VS edition to purchase.
View 2 Replies
View Related
Jan 30, 2011
Trying to convert video footage on VHS video to AVI files which I can burn to DVD disc. I bought EasyCap and installed it along with Ulead Video Studio. The program seems to be running OK, the device appears to have been installed OK. I connected the VHS recorder to the Easy Cap device with the Scart to RCS lead supplied with it. When I go to capture video, nothing happens, apart from the clock starting. The screen remains blank and no video is recorded.
View 1 Replies
View Related
Dec 23, 2013
I have a .png image that is 38 pixels wide and 30 pixels high. I would like to enlarge this image to 64 x 64 pixels and also 100 x 100 pixels size, but when I try to do this, the image becomes blurred. The file image is attached. It's a hamburger.[/color]
View 1 Replies
View Related
Sep 5, 2012
I bought VSX5 Ultimate last week to go with my new GoPro Hero2, climbed the learning curve, and can now produce presentable videos. I've read the (not very complete) VS User Guide, checked Corel's Knowledgebase, spent the better part of thirty hours twiddling filters (rendering to a 1280x720 output file and viewing that outside of VS) and spent about eight hours searching this forum and the Interweb for the answer to no avail, so here I am:
I have 1920x1080 30p MP4 video from the camera, but want to crop it to 1280x720, and not lose image quality. Can VSX5 do this, and/or how?
I'm new to video, but very old to photography. When I say "crop" I mean "throw away the area outside of my cropping rectangle, resulting in an image of smaller dimensions."
I do not mean "fill the area outside my cropping rectangle with the color of my choice, resulting in an image of the same dimensions" as happens when using the Crop Borders filter.
Video Pan & Zoom doesn't work as the final results are abominable; as soon as I specify 150% zoom (amount needed to make a 1280x720 area fill a 1920x1080 area) quality is lost. The Cropping filter produces the same (lost) quality results. Distort Clip does the best job but still suffers some image quality degradation, and it's nearly impossible to get a precise "150%" crop (or "33% reduction" as my Photoshop brain thinks) as dragging the handles is all by eyeball. I think the problem is that all of these options entail two steps: (1) Enlarging the area I want to keep, causing it to fill the frame -- AND losing quality in the interpolation process. (2) Saving the entire frame (clip), now filled with lower-quality "larger pixels" so to speak, at a smaller size than original.
My Project Properties are NTSC drop frame (29.97fps), AVI, 24bits, 1920x1080, 29.97fps, Frame-based, Uncompressed, PCM, 48kHz, 16bit stereo.
My Movie Template that I'm using is MPEG-4, 24 bits, 1280x720, 29.97fps, Frame-based, H.264 High Profile Video: 12500 Kbps, 48000Hz, 16bit, Stereo, MPEG AAC Audio: 128Kbps.
Am I trying to do something that can't be done? Am I overcomplicating something? Am I missing the "photographic crop" filter?
View 3 Replies
View Related
May 15, 2012
I put together some vacation photos in a slideshow. What is the difference in rendering them in "DVD Video" or "DVD Slideshow"? Don't they both do the same thing?
View 2 Replies
View Related
Oct 10, 2010
How to save a transparent video that I can use as a overlay in Proshow Producer?
View 1 Replies
View Related
Apr 23, 2013
I am using Video StudioPro X4 and rendering a video that is about 15 minutes when it stops at 4% complete, showing the following words: Cannot read audio (0x80004005). Other numbers on the message are: (18300:8000:192). Is there a way to know why it will not continue rendering and/or which audio files to check?
View 3 Replies
View Related
Sep 11, 2012
First, some glitches (short freeze frame) at video transitions. Usually at the end of the transition. I could upload some samples... The problem persist in both : hardware or software accelerated mode.
Also, when i want to create a video file and i use the "same as first video clip" even the project is a HDV 1440x1080 format, the video is created as DVD 720x576 4:3 aspect.
View 3 Replies
View Related
Aug 21, 2011
my video and audio to synchronize after rendering. About end of last year when I first brought this issue, I was made to believe that I do not have a “good” or “powerful” enough system to handle what I was doing.
View 14 Replies
View Related
Nov 30, 2011
I have just taken some short video clips and put them together in a 3min 40 second video. When I tried to save it to my desktop the rendering took a little over an hour. This is my first try so I am really a newbie Is it normal to take that long to render? I was planning on making 20 to 40 minute videos but at an hour for every 3 minutes it may not work.
View 3 Replies
View Related
Jun 8, 2012
I want to render a video that consists of two parts: A small intro (8 sec) and a video (~2min). I want to render it on iPhone 4/iPad HD (720p). Now, after rendering the intro (~9%) the program crashes with the message "Corel VideoStudio Pro X4 doesn't respond..." System Specs in profile.
View 2 Replies
View Related
Apr 24, 2011
I'm using the trial version of CVS X4 and have been impressed so far, but have come into a problem that I have seen others post here, but it's not 100% identical to my problem.
I'm able to view each clip individually without any playback problem upon capture. However, once I drop a clip into the timeline, the clip experiences a very slight but noticeable bit of stuttering/jumping/hiccuping every so many seconds during playback on the timeline. I was hoping that this might have just been occurring in preview mode, but after creating a video file, the problem still exists. This footage was captured using a Flip camera.
I've posted a 1 minute sample on Youtube at [URL] ...... You'll notice while viewing an opening pan of the Welcome sign and footage of the columns the issue I'm inquiring about. I find it very strange that this especially noticeable when a scene is being panned.
Screen Shot CVS Jumping.jpg (39.95 KiB) Viewed 615 times
View 14 Replies
View Related
Dec 20, 2013
Clips play to choppy in timeline to edit and take far too long to render since update to Premiere Pro CC 7.2 and 7.21.
XAVC HD footage from Sony F55 in Slog2.
Have reverted back to 7.01 and clips play, but now cannot render a single clip in it's entirety. The render process freezes even with no effects applied to the clip. What can I do to fix this?
Mac Book Pro Retina
Processor 2.7 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GT 650M 1024 MB
View 3 Replies
View Related
Jun 27, 2012
how I can stop rendering an animation and still retain what has already been rendered?
View 9 Replies
View Related
Mar 25, 2014
I want to film my CEO standing on London Bridge as people walk over it. The trick is is that I want to film him at normal speed (for obvious reasons), and i want the people walking past us to be shown at double the speed.
Having thought logically I guess I need to film people walking over the bridge separately from filming my CEO, then somehow superimpose him on the that footage.
View 4 Replies
View Related
Jan 31, 2013
After selecting "interpreting footage" in after effects after importing my video clip (the clip shows 24.999 fps) i change it to 25fps and it starts working. It took me a while to figure out why my clips werent matching with my seperate audio, there was missing clips. My footages i import are 30 minutes and after i interpret my footage, it gets shortened to 22 minutes. I am using Windows 7 and AE 5.5.
View 5 Replies
View Related
Mar 14, 2014
I opened up my project and all the footage has seemed to change to look like a "film negative". Colors are reversed, etc... Clips on the timeline and clips in the project folder. How can I correct this..
View 1 Replies
View Related
Aug 24, 2013
I only have Photoshop CS5 and would like to edit video footage I have of my college fashion show, my portion of which is about 3-4 minutes long. One video I have is taken by a hand held camera and I would like to somehow blur or crop out the distracting audience, which I know will be difficult because the camera is a little unsteady.
My other footage is from the official DVD and is taken straight on from a steady camera. I want to splice the two videos together so you can see all angles of my designs. I think I will need to overlay a new soundtrack (just a song in my library) as well. How much of this is possible in Photoshop, and for an advanced Photoshop user but a complete novice at anything video related, how difficult will this be to acheive? How time intensive? Before I delve into researching tutorials and online resources, I really would like to know if it's even a feasible project.
View 2 Replies
View Related
Mar 19, 2014
The capture went just fine when digitizing my tape and the .mov file has both audio and video during playback in both quick time and Adobe Premeir Pro, but when I drag it into the time line only audio will show up. Even weirder it's 4 layers of audio instead of just one audio and one video. This only began with videos that I catured today. When using footage I captured on a previous day it works just fine. What went wrong? Where's my video!?
View 1 Replies
View Related
Jan 13, 2014
I have 2 years of footage related to a project and I'm looking to have it centralised and have metadata attached to it that will allow me to cross reference footage, for example, when someone in an interview talks about losing weight and to be able to pull up clips that relate to that.
I got a feeling that an Excel spreadsheet is the way...
View 1 Replies
View Related
Mar 16, 2014
Ive been attempting to import AVCHD video footage captured on a Panasonic into Premier Pro CS6 on my MacPro. I've tried this from the camera and after copying the entire folder to my desktop. The footage is there, but has no audio!
View 6 Replies
View Related
Apr 14, 2013
I have a Sony camera wich can record 1920x1080 50p.It's the absolute best quality that camera can capture. The raw footage looks marvelous. After open in Videostudio X6 it plays ok but the final disc blu-ray or avchd even on dvd format the footage looks juddery especially on pans and moving subjects.
View 14 Replies
View Related
Jun 7, 2012
I'm trying to use the export>render video feature in Photoshop CS5 extended. I must use avi without any compression, keeping the original frame rate (the original file is also an uncompressed avi). My impression was that this setting keeps the original video quality.
However, the exported video loses quite a bit of its original quality. Is it possible to keep the original quality?
View 6 Replies
View Related
Jul 20, 2011
What settings I should use to put HD footage -after editing in VS4,using smart proxy etc..- to DVD with a minimal loss of quality. I'm using the Ulead and Corel products since years but I'm a newcomer on the level of HD-editing. I use a Pansonic HDC-SD90 with the following specifications.
Signal System 1080 / 50p, 1080 / 50i, 540 / 25p
Recording Format <Original Format>
1080 / 60p : MPEG-4 AVC/H.264
<AVCHD standard compliant>
HA / HG / HX / HE : MPEG-4 AVC/H.264
<MPEG-4 AVC file format compliant (.MP4)>
iFrame : MPEG-4 AVC/H.264
Recording / Playback Mode
(1920 x 1080) 1080 / 60p (28 Mbps / VBR), (1920 x 1080)
HA (17 Mbps / VBR), (1920 x 1080)
HG (13 Mbps / VBR), (1920 x 1080)
HX (9 Mbps / VBR), (1920 x 1080)
HE (5 Mbps / VBR), (1920 x 1080)
iFrame (28 Mbps / VBR), (960 x 540)
Audio Recording System 1080 / 60p / HA / HG / HX / HE : Dolby Digital (2 ch) iFrame : AAC (2 ch)
View 1 Replies
View Related
May 12, 2011
I can see that saving my 50p footage as 25p would be ideal as it would just drop every other frame. However vsx3 doesn't give me the 25p option. mp4 hd 1080x1920p only offers 30p
Is this because I set vs up as PAL region ? If I changed it to ntsc would it then offer me the 25p option?
I'm really trying to find my best "saving " option for my 1920 x 1080p footage. I use 50p so I can get good slow motion but 25p or 30p would be good output if it plays nicely..
View 11 Replies
View Related
