my video and audio to synchronize after rendering. About end of last year when I first brought this issue, I was made to believe that I do not have a “good” or “powerful” enough system to handle what I was doing.
View 14 RepliesEach time I am trying to do something with Corel VideoStudio X6, I have a new issue. This time, when I try to play the preview of my full video, image blocks all the times, I have to hit the space bar two times to pause and resume playback, then it takes more than 30 seconds before playback resumes. I tried to encode the video, it worked, but after around 15 minutes, audio and video get out of sync.
I tried to contact Corel technical support and they could not do anything for me. They suggested me to install the Service Pack 1: installer pretends VideoStudio is not installed because I have an almost-full SSD and put VideoStudio in my data drive. Adding a second SSD would not solve the problem, because this would just create a new drive, and replacing the current SSD with a bigger one forces me, AGAIN, to reinstall everything! Then they suggested me to again reinstall Corel VideoStudio, but this takes hours and hours, because it tries to redownload everything and this is always waiting and blocking (and I DON'T know what to check if I have, AGAIN, to check my Internet connection).
It seams that when editing in After Effects (CS6) despite doing everything i've been told to do i get no audio when editing video clips imported from my digital camcorder. The only audio it seams i can hear in it is an actual song or audio file (MP3) and the worst part is when i render out the video after adding my effect even when i check the audio output box in the Output Module, i keep most render settings the way they are? but i have tried everything that i have seen suggested but nothing seams to work and no matter what i do i cannon manage to get any audio from my finished products unless there is an actual song in it.I must also add that in the Output Module i have tried many formats such as MPEG4, H.26, AVI, WAV, Windows Media and many others, none of them make a difference to the audio, only the quality of the video.
View 4 Replies View RelatedI have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
The audio sounds choppy and I cannot figure out why Im getting it. I'm experimenting with Corel VS to learn how to use it. IF I use audio files ripped from a CD I get choppy audio after the project is rendered to a wmv hd 1080p file. It sounds fine during the preview playback in the project though.
Music that I have downloaded from the web does not do this. I assume I am doing something wrong when extracting audio from disks? I am just using Windows Media Player to RIP the CD's with. Should I use something else?
I use VS ver 10.0 and during working on a project there were no problems. I use different files (audio and video) and after rendering lost some mpg audio files. Video is still there but audio is muted. wma and one mpg files works fine.
Project properties:
PAL (25 fps)
MPEG files
24 bits, 720 x 576, 25 fps
Lower Field First
(DVD-PAL), 16:9
Video data rate: Variable (Max. 8000 kbps)
Audio data rate: 224 kbps
MPEG audio layer 2, 48 KHz, Stereo
wma file properties (works fine after rendering):
mpg files, different ones (works fine after rendering):
mpg files (do not work, muted):
Is it possible to save them (muted audio)?
I have created three projects and produced from them 3 perfect MPEGS (PAL DVD 16:9 Stereo) - I am now trying to put them together into one single MPEG, but the finished MPEG audio stutters occasionally. I am going to try and remove the additional link vids in between them and see if that makes a difference. Let me know if you need any more info.
View 4 Replies View RelatedI am having a very difficult time trying to figure out what is wrong with my audio in VSPx4.
When I put a video in the timeline and click on it so it is on the "clip" the video plays fine but the minute I switch it to "project" the audio dissappears. If I render it in any format, the audio doesn't return. Also, if I multi-trimm a video I am no longer able to get audio either.
Lastly, if I split the audio from the video I cannot play the project at all. It just gives me a frozen screen...
I have re-installed VSPx4 and have all the patches updated.
I have a GoProHD Hero camera, I've been recording stuff mainly in 960p at 30fps because that's all my computer can handle at the moment.
My main problem is that I lose the HD part of the video after edit and render the video in VideoStudio X3. The file type is MPEG4, when I render the final project, I set it to save as the same file type, at 1280x720p with a data rate of 5Mbps all in the H.264 MAIN codec mainly for Youtube uploading purposes.
If I were to upload the raw footage directly to Youtube, it's in true HD and uses the full width of the player when played at 720p. However, when I upload the final project to Youtube even when set to play in HD (720p) it is only in letterbox format.
Am I rendering my projects incorrectly? Why does it keep doing this? Is it some sort of file compression issue or something? I'm pretty new to the whole video editing platform, I'm pretty much learning on my own.
I put together some vacation photos in a slideshow. What is the difference in rendering them in "DVD Video" or "DVD Slideshow"? Don't they both do the same thing?
View 2 Replies View RelatedHow to save a transparent video that I can use as a overlay in Proshow Producer?
View 1 Replies View RelatedI have never used any video editing software and I have a Video issue I want to shoot video with a Nikon D3100 DSLR in either 720P or 1080P. The camera produces MOV format (see more at the end of the post). I want to record the audio on a Zoom H4 digital recorder (see more at the end of the post.)
I want to combine the audio from the H4 and the video from the Nikon and have them in sync. The vid is of musicians so I need the video of the musicans hands syncing properly with the music they are playing. This will be shot in a "studio" situation. Not a concert.
I will ask the main quesitons first then give some tech specs on the gear.
1) Can the Corel X3 or X4 video software remove the audio from the MOV file and replace it with either the WAV or MP3 from the Zoom H4?
2) With two different devices recording audio and video, will there will be some differences in sync that have to be corrected?
3) Can Corel make adjustments to the audio speed without changing pitch if I need to do that to sync the audio to the video?
4) The H4 can record in WAV or Mp3 in a variety of bitrates. Forgetting the audio quality, does the WAV or MP3 format make a difference as far as syncing goes?
5) If all of this can be done in Corel does it make a difference if I get the X4 or the less expensive X3 software. At least at this point the only extras I would be adding is a title.
Tech specs on the equipment:
The Nikon D3100 produces HD video in .MOV format using file compression of H.264/MPEG-4 Advanced Video Coding.
Frame Rate is:
1,920 x 1080 (Full HD) 24p (23.976fps)
1,280 x 720 (HD) 30p (29.97fps)
1,280 x 720 (HD) 25p (25fps)
1,280 x 720 (HD) 24p (23.976fps)
The Zoom H4 can record in either WAV or MP3 in a variety of bitrates, including 44.1, 48 and 96kHz.
I am creating video in FLV (custome mode). The only audio compression option is PCM which makes video too big.
How do I add different audio compression codec for FLV video? With other video formats/codecs mpeg-4 I have many moore audio compression options, but not for FLV.
I've edited together some PAL SD video clips, that I copied and pasted from my Sony DCR-SX53ES camcorder, and auto-generated music and when I preview the project through the edit screen everything is okay. I then selected Create Video File and DVD and the output file completed successfully, however, when I play back the file both the original audio from the video clips and the added music are out of sync with the video pictures by about 4 seconds.
This did not happen the previous time I used X4 with the same camcorder and on the same PC, how to correct it.
I just downloaded the VideoStudio X5 Trial, and want to crop a 10-minute video of my baby to the minute she's singing. Her grandparents would love it.
I noticed that when I imported the video into the timeline, the audio was about 0.75s ahead of the video, when in "Project" mode. In "Clip" mode it looked/sounded fine. When I render the video, it also has the same sync problem as in "Project" mode.
Here are the details of the video:
Video type: H.264 Baseline Profile Video
Total frames: 18,430
Attributes: 24 bits, 1280 x 720
Frame rate: 29.908 frames/sec
Data rate: 11965 Kbps
Audio type: MPEG AAC Audio
Total samples: 29,736,960
Attributes: 48000Hz, 16 bit, stereo
Bit rate: 96 Kbps
I have been trying to capture both Video and Audio in Video Studio Pro X4. I have a program called Diamond One-Touch Video Capture V500 that uses a USB connection for the Video and Stereo output from my Sony Handycam Digital 8 Model DCR-TRV740. The one touch software works well to capture both the Video and Audio, however, I was hoping when I purchased the Corel Video Studio Pro X4, that I would be able to record both video and audio with the capture feature, since V500 Video shows under sources in the capture screen.why the Video Studio will not record the audio while the One Touch Video program will?
View 5 Replies View RelatedAny way to link audio and video together to if you move one they both move?
View 8 Replies View RelatedI am using Corel Video Studio Pro V4. I am exporting as the following:
- MP4
- 30FPS
- 1280 x 720
- Frame Based
- H.624 MAIN
- 5000 kbps
- AAC
- 44100 Hz
- 256 kbps
- Video is about 25min long
At different parts in the video, the audio begins to be off.
im trying to capture in VS x4 but i only get audio. no video is coming up on my capture screen but if i record, the recording will show video... video just wont show up in the capture screen inside VS x4.. i read where people couldnt see video if they were trying to capture DV and some were told to get windv or someother program to get the video but im not trying to capture dv.. im trying to capture video with my tv capture card, avertv hybrid volar max.. it captures the audio thru the vd x4 capture screen but not the video although if i do a recording both audio and video will play in the mpg.. why cant i see the video in the capture screen?
View 2 Replies View RelatedI'm running VS Pro x4 and I'm trying to import a video that I got from a homemade DVD which was created from a VHS tape. When I import the file to VS, the video is fine, but it thinks there's no audio with it. If I play the file in iTunes, then it has audio.
The video file's specs are as follows:Kind: MPEG-4 video fileSize: 324 MBChannels: Stereo, Dolby Digital 5.1Encoded with: HandBrake 0.9.6Video Dimensions: 634x480Video Codec: H.264What am I doing wrong?
I purchased (USB-Live 2) to convert VHS tapes to DVD. I initially purchased "Ulead VideoStudio 11" to capture and edit video, but the software wouldn't work. I received the following messages: "cannot start the capture graph" or "cannot capture: copy protected material". I was unable to receive a solution from the Hauppauge tech people or the corel tech people, therefore I purchased the Pinnacle studio 12 software and their Dazzle DVC 100 capture device.
Using the "USB-Live 2" device and Pinnacle Studio 12 as my capture software and Ulead VideoStudio 11 to edit and burn, I successfully converted about 100 VHS tapes to DVD disks. Then the Audio would not sync. What happens is that for about 5 minutes the audio will be out of sync, then something happens and the audio will re-sync and stay in sync until the end of the project. But, with the next tape I try to capture the same problem occurs.When in capture mode I can start capture and let it record for about 5 minutes, then, start the tape in the VCR and the audio will be in sync. I wiped the Hard drive and reloaded Windows XP and all of my programs. I also replaced the sound card, but I still have the same problem. I think the problem is with the Hauppauge USB-Live 2 capture device. If I use the Dazzle DV100 there is no sync problem, just a lot of dropped frames.Also, now when I am capturing the video I have no audio but when I edited the project the audio will be on. When I installed the New Sound Card I disabled the onboard HD Audio and it is still disabled.The following are my computer specs.
Asus P5NSLI motherboard
Intel Core 2 DUO 2.66GHz
3 GB DDR2 800 MHz Ram
Nvidia GeForce GT220
Asus Xonar DG 5.1 Sound Card
Hard Drive: 2- 320 Gb drives
Monitor: eMachines E2024
WinXP SP3
I'm using Corel VideoStudio X4. I'm facing problem that there is no any audio for any type of video playing. AVI, MP4.. any type of file I play, no audio plays.. All files are checked & plays correctly in any video player, GOM, VLC player etc...
No problem with video files. there is no audio for sample files provided by corel itself. When I play mp3 like audio files, sound plays perfectly. But some problem with video files only... I edited one file but no audio for that file also when I play edited clip in video player like VLC.
PC Configuration:
Windows 7 Ultimate.
HP DV6 laptop. 1GB graphic card, i5 2nd Gen.
After i import video files - and try to play them in Video Studio - the video is not smooth (i jitters) and the audio is not in sync with the video.When i play the same video file in windows media player they play well. The Videos are in full HD (.m2ts) format.
View 5 Replies View RelatedI'm trying to capture video from a VHS/DVD machine using an EasyCap (2.0 I think). I'm able to get video but it's pulling the audio from my computer's mic. I investigated settings and found that 1) the format resets to MPEG if I set it on DVD and 2) when I go into Options > Video and Audio Capture... and select the only option in the drop-down for Audio device that says USB, the program crashed. I opened it back up and saw that it was still set on USB for the Audio device, but when testing I didn't get the video's audio. I'm new to capturing video this way, am I missing something? I double checked that the cables are plugged in correctly.
View 1 Replies View RelatedI have a video clip (.MOV) which I have added to my project.
When I preview the clip itself the sound is perfect. However when I preview he actual project, the sound is distorted.?
Referring to the sample Visuals and Audio in Video Studio X4, Youtube is a commercial site - so does that mean that I cant use any of the sample sounds and backgrounds in videos I post to Youtube ?? I read a post on this forum about usage rights that was a bit vague stating that sample audio and visuals cannot be used in a commercial environment ?
I use both Corel Video Studio " Cause its time line Rocks "and Sony Vegas Movie Studio " Cause its H.264 for 360P video Rocks, I can use everything that comes with Sony Vegas Movie Studio for private and commercial use. Is the same true for Corel Video Studio ?
The reason I ask is because there is an audio track in Corel Video Studio sample area Named " Mo5.mpa " that I would really like to use in my Youtube video.
Ps if I cannot use the sample Audio Track is there a Royalty free Music area that I can purchase the track for use on Youtube >>>> ?
I just purchased Pro X4 online and the audio and video is choppy when I try to edit the video. I thought it was just my computer, but when I burned a DVD yesterday, it also came out incredibly choppy.
View 1 Replies View RelatedA friend of mine shot some video with his JVC everio on 1/8/11.The native files PLAY fine in VS3 however any attempt to convert to any output video file or just output the audio track (which is what I really want to do) results in random audio "skips" like what happened when an LP had a scratch and a stylus couldn't play it.I have VS SP2 installed along with the audio patch on the Corel site.
I've successfully exported the MOD files to other formats using a freeware program called Video Pad from nchsoftware.com, so I can only assume VS has a problem.
I thought before I downloaded that MOD file converter, that's been discussed here, I would ask.Seems that a PAYware software like VS, shouldn't have this problem.Prior to using MOD files, I used AVI files in VS and exporting to an audio file worked just peachy.
I have read the thread regarding sound breaking up in ProX3. I have this same problem in ProX3 and ProX2. But all of a sudden I am also experiencing the problem of the video and audio being out of sync in files from my Sony Handycam HDR-CX350 set on Standard. The video files I take using either a Sony or Olympus that I mainly use for still shots work fine.
When I first installed ProX2 and then ProX3 my struggle was with the changes in menus and such as I had been using VS11.5 but the videos themselves worked okay. Now all of a sudden I am experiencing the sound problems. I cannot tie the changes in with any specific Win update as I just don't remember the sequence of events.
At one point I had installed a PowerPoint video converter which gave me a registry error message at the time but the sound problems developed much after that time.
Yesterday I downloaded a trial version from another company thinking perhaps I needed to move on but I believe the out of sync problem is worse with that software than with Corel software.
I am wondering if a setting got changed in how the software manages the video from the handycam but I guess I am not smart enought to see what it might be.
I am using Video StudioPro X4 and rendering a video that is about 15 minutes when it stops at 4% complete, showing the following words: Cannot read audio (0x80004005). Other numbers on the message are: (18300:8000:192). Is there a way to know why it will not continue rendering and/or which audio files to check?
View 3 Replies View RelatedFirst, some glitches (short freeze frame) at video transitions. Usually at the end of the transition. I could upload some samples... The problem persist in both : hardware or software accelerated mode.
Also, when i want to create a video file and i use the "same as first video clip" even the project is a HDV 1440x1080 format, the video is created as DVD 720x576 4:3 aspect.