I am using Video StudioPro X4 and rendering a video that is about 15 minutes when it stops at 4% complete, showing the following words: Cannot read audio (0x80004005). Other numbers on the message are: (18300:8000:192). Is there a way to know why it will not continue rendering and/or which audio files to check?
View 3 Replies
Photoshop CS6 stops working while rendering a HD Basic video. I am using windows 7 32 bit with photoshop CS6.
View 10 Replies View RelatedI am trying to complete my first project in X3 with a new computer. I have done many projects on an older computer with VS 10. I X3 stops working during the rendering process everytime I try to make a video file. I'm making a 4:3 mpeg 2 file (DVD). I have tried several different ways and the most I can get done is 24%. i have tried to cut out a clip..I get a dump file each time that it tells me to send to Corel.
View 5 Replies View RelatedI am using VideoStudio Pro X3 on my Windows XP Pro machine (see profile for specifics) to capture and edit video from my Canon Elura 100 MiniDV Camcorder. The problem I am having is that VS Pro X3 is stopping the capture during scene changes. It stops both the software and the camera. This does NOT happen on every scene change, but happens at differing times throughout the tape. It requires me to restart the capture from that scene forward. This happens regardless of whether or not I have the 'Split by Scene' option enabled. It is frustrating to have to sit through the entire tape restarting the capture at various scene changes. Previous tapes I have used Windows Movie Maker to capture the video. I have tried WMM to capture these tapes and it does work successfully without stopping at scene transitions. A related question is on Data Rate. The data rate listed under the properties menu in VS Pro X3 is almost 2x for the clips captured with VS Pro X3 vs the same clip captured with WMM while all other attributes are the same (including file size)?
View 4 Replies View RelatedI have already more than 100 projects running under VS X4 it is problematic to jump to other software, also because of spending 2 years studying Corel VS.I have found now (2 years to late) the top very stable professional software with Edius 6.06.
What happens.... In new installed VS X4 if i put a videofile on the timeline and go to SHARE >MAKING VIDEOFILE MENU....the computer breaks down, and gives the error: " VS X4 does not work anymore..... " and stops working, realy breaking down....
Have tryed it lots of times, it looks like at installing the program, the link to the output formats is not there and VS X4 does not now how to handle.....Yes I am going over to the professional software edius 6, but with a usermanual with 1000 pages i need studying at least one year on that....
Using VideoStudio X4. I Have a JVC VHS unit which captures video perfectly fine. It's connected via firewire from the JVC unit into a firewire 2 adapter and into the iMac. However I also have a Sony 8mm playerGV - D800E unit which plays back via the preview pain on X4 fine, but as soon as you hit capture, it runs for 9 seconds and stops and it does capture 9 seconds of footage. I've run the Sony unit with other apps and it works fine. Just with X4 I have issues with. Tried switching between DVD (array of differnt setting) and DV (Type1 and 2) but with no luck.
I also tried connecting the Digital Sony 8MM player via a video capture device (Canopus ADVC110), same result. It captures video for 9 seconds, VS stops capturing, and the player continues and play's back on the viewer in VS.
I have a GoProHD Hero camera, I've been recording stuff mainly in 960p at 30fps because that's all my computer can handle at the moment.
My main problem is that I lose the HD part of the video after edit and render the video in VideoStudio X3. The file type is MPEG4, when I render the final project, I set it to save as the same file type, at 1280x720p with a data rate of 5Mbps all in the H.264 MAIN codec mainly for Youtube uploading purposes.
If I were to upload the raw footage directly to Youtube, it's in true HD and uses the full width of the player when played at 720p. However, when I upload the final project to Youtube even when set to play in HD (720p) it is only in letterbox format.
Am I rendering my projects incorrectly? Why does it keep doing this? Is it some sort of file compression issue or something? I'm pretty new to the whole video editing platform, I'm pretty much learning on my own.
I put together some vacation photos in a slideshow. What is the difference in rendering them in "DVD Video" or "DVD Slideshow"? Don't they both do the same thing?
View 2 Replies View RelatedHow to save a transparent video that I can use as a overlay in Proshow Producer?
View 1 Replies View RelatedFirst, some glitches (short freeze frame) at video transitions. Usually at the end of the transition. I could upload some samples... The problem persist in both : hardware or software accelerated mode.
Also, when i want to create a video file and i use the "same as first video clip" even the project is a HDV 1440x1080 format, the video is created as DVD 720x576 4:3 aspect.
my video and audio to synchronize after rendering. About end of last year when I first brought this issue, I was made to believe that I do not have a “good” or “powerful” enough system to handle what I was doing.
View 14 Replies View RelatedI have just taken some short video clips and put them together in a 3min 40 second video. When I tried to save it to my desktop the rendering took a little over an hour. This is my first try so I am really a newbie Is it normal to take that long to render? I was planning on making 20 to 40 minute videos but at an hour for every 3 minutes it may not work.
View 3 Replies View RelatedI want to render a video that consists of two parts: A small intro (8 sec) and a video (~2min). I want to render it on iPhone 4/iPad HD (720p). Now, after rendering the intro (~9%) the program crashes with the message "Corel VideoStudio Pro X4 doesn't respond..." System Specs in profile.
View 2 Replies View RelatedI am using VSX5 and after rendering a project of video, where I have added transitions and titles, the video image is not as clear as it was before I rendered.
I have captured the footage from a mini dv camera using firewire, or, someone else has captured the video footage on a dvd using a dvd burner and given me the dvd to import into VSX5. Sometimes VSX5 will not read that dvd for import, so I have used freemake video converter, and converted the dvd into an mpeg file and put it in a folder on my computer where VSX5 "grabs" it. During the edit phase, the video is clear, after render, it loses some of it's clarity and is blurry.
This has not always been the case. The only thing that has changed with VSX5 is I installed sp2.
I'm using the trial version of CVS X4 and have been impressed so far, but have come into a problem that I have seen others post here, but it's not 100% identical to my problem.
I'm able to view each clip individually without any playback problem upon capture. However, once I drop a clip into the timeline, the clip experiences a very slight but noticeable bit of stuttering/jumping/hiccuping every so many seconds during playback on the timeline. I was hoping that this might have just been occurring in preview mode, but after creating a video file, the problem still exists. This footage was captured using a Flip camera.
I've posted a 1 minute sample on Youtube at [URL] ...... You'll notice while viewing an opening pan of the Welcome sign and footage of the columns the issue I'm inquiring about. I find it very strange that this especially noticeable when a scene is being panned.
Screen Shot CVS Jumping.jpg (39.95 KiB) Viewed 615 times
Rendering at high quality, exterior sun only, 150 DPI and the image is about 9' tall x5' wide. Everything goes great until it hits 26%. Then the bar goes full on 100% but the image is only 26% rendered.
I have a 2gb video card, 4.1Ghz overclocked processor and about 8GB of RAM. Perhaps I havn't allocated enough memory to render an image of this size?
how can I make Max send an email when a render is complete? I tried the Email Notifications option in the Render Setup menu but I can't make it work.I type my email address in the first two fields and then the SMTP server (smtp.gmail.com) in the last field but after the render is complete there's no email.
View 5 Replies View RelatedSo I recently created a 350 frames long animation, which I then tried to render out as an .avi using the mental ray renderer.
I have it set up in the render setup to render from frame 0 - 350, I have also chosen the output format.
Everything seems to work fine and dandy, the frames are rendered out nicely but then all of a sudden after about 40-50 frames it just stops rendering. The little window containing the progress bar just seems to disappear and in the render preview window is a half rendered image.
I have tried redoing this 3 times, but every time it just stops rendering at about the same place. The first time it stopped at frame 43, the second time at frame 47 and the third time somewhere inbetween.
sometimes rendering the RAM-Preview takes some time. while waiting I would like at least to read some articles on the internet. But as soon as I click into an other windows, AE stops rendering.
is there a special setting / workaround to avoid this (user-unfriendly behavior) ?
When I start rendering a composition, I usually just go to a spare monitor to browse the web and do additional work. However whenever I click onto my new monitor, AE stops rendering and gives me the 'finished sound'. Why doesn't it complete rendering? I have to leave my computer alone and keep a window selected in AE for it to complete.
View 1 Replies View RelatedPs CS6 13.0.1
OS X 10.6.8
3D rendering stops when mouse is clicked, regardless of which app has focus or in which app's window the mouse is clicked.
how another app can have focus before the mouse is clicked, Cmd+Tab can be used to switch between apps.
I started rendering using 360 cloud a few weeks ago. I've done lots of renders, all working fine until a few days ago.Now when i submit a render to the cloud in Revit 2014, it takes forever to process and then says either"could not complete your request, failed to authenticate" or something similar but with "could not upload file" as well.
I have tried logging out and clearing my browser cache etc but it still wont work.
When watching more (3 to 4) videos after one another, the video player just stops working.After a while (a minute or so) I get an error message: "There was an error working with the video".
The only way (so far) to get it to work again is to restart Windows.And then again, I can watch 3 to 4 videos before the problem occurs again.My computer runs 64-bit Windows 7 with 8GB RAM.
I have PS CS6 and when I click on File> Import> Video Frames to Layers.. Next, the window that says "Initializing Video Import" starting to load and always get stuck and that's what appears: "Could not complete the video frames to layers command because the DynamicLink Media Server is not available". That's with aaaall the videos.
I've been trying with File> Open but that's what says "Could not complete your request because it is not the right kind of document".
I have been using Photoshop CC for several months to export animations to .mov. All of a sudden it gives me this message - "Could not complete the Render Video command because of a problem with Adobe Media Encoder." what is happening, the Media Encoder seems to be working fine.
View 3 Replies View RelatedWhile editing a large video file (one hour), the audio playback worked for a while, but then simply stopped working. Can still see video and edit it, but without hearing the words / background, editing will not be correct. Is there a bug in the software or some way of reseting the file? I have noticed a similar issue with videos in LR4.
View 2 Replies View RelatedI recently learned to make gif images using KMPlayer and my Photoshop CS6, but today I hit a snag that I can't seem to get around. Normally I capture a scene from a show DVD I have in KMPlayer and then import the video frames into layers/frames in photoshop with no problem. Well today I went to do that, and captured the scene with what seemed like no problem (the small captured scene saved with no problem) but when I went to CS6 to import the video into layers, I got the error message "Could not complete the video frames to layers command because the file could not be opened". At first I thought it was the KMPlayer saving the files wrong, so I retried and got the same error message. I Restored the players settings back to a default and the file still wouldn't open in photoshop, and then I even tried uninstalling/reinstalling the player trying to get it to work, and then I thought it must be photoshop, because even scenes I had captured at an earlier day that worked perfectly fine when importing would not open.
Should I uninstall/reinstall photoshop and see if that works,The files I'm trying to import are AVIs as always, I even tried to capture scenes in other formats to no avail. What could be causing the problem?
So I decided to try my hand at making gifs and so I attempted to upload a video by going to file -> import -> video frames to layers. Before even letting my pick my video it comes up with an error message saying "could not complete the video frames to layers command because dynamiclink is not availible." I then tried file -> open -> and then selected the video and no matter what file type or size I chose I ended up with the same error message.
I looked this problem up and attempted some of the solutions but to no avail. I tried clearing my preferences and restarting photoshop many times in addition to restarting my computer. I also checked to make sure it wasn't being blocked by any firewalls and it wasn't. My opperating system is Windows 7 and I'm using photoshop cs6.
I have been doing this project in X5 and was putting a still picture at the end. When I review the project it stops about a second or so from the end. I thought it was the song, so I took that out.
I changed the picture, did the same thing. I lengthen the time on the picture, it will place and stop about the same time from the end. Doesn't matter how long the picture is playing. If I take the picture out, the video just before it plays fine. I put a picture back in, and it does the same thing? I thought the project time may be set someplace? Doesn't seem to matter because I change the timing on the picture at the end. Stops the same place?
I'm currently using Corel VideoStudio Ultimate Pro X4. Sometimes when I burn a project to DVD it does not play the whole thing. The program says "burn successful" but when I go play it on the tv it stops maybe 10 to 15 mins before it ends.
I thought it might have been the batch of Verbatim DVD-R discs that i use but now I dont think so because i'm using a new batch.
For awhile I started turning my project into an AVI file and then burn it. That actually started to work,....until now.
I've tried installing the purchased downloaded version of the software to two different Windows 7 64 machines and installation just stops on the first screen. "Next" never becomes active. Corel told me to delete my temp files and I've done that, to no avail. I had the same thing happen with the trial version and just figured that they would have fixed the for sale version.
Is there a cleaning or prep patch for this one?
