VideoStudio :: DVD Stops Before It Reaches The End
Oct 17, 2012
I'm currently using Corel VideoStudio Ultimate Pro X4. Sometimes when I burn a project to DVD it does not play the whole thing. The program says "burn successful" but when I go play it on the tv it stops maybe 10 to 15 mins before it ends.
I thought it might have been the batch of Verbatim DVD-R discs that i use but now I dont think so because i'm using a new batch.
For awhile I started turning my project into an AVI file and then burn it. That actually started to work,....until now.
View 8 Replies
ADVERTISEMENT
Mar 28, 2013
I have been doing this project in X5 and was putting a still picture at the end. When I review the project it stops about a second or so from the end. I thought it was the song, so I took that out.
I changed the picture, did the same thing. I lengthen the time on the picture, it will place and stop about the same time from the end. Doesn't matter how long the picture is playing. If I take the picture out, the video just before it plays fine. I put a picture back in, and it does the same thing? I thought the project time may be set someplace? Doesn't seem to matter because I change the timing on the picture at the end. Stops the same place?
View 14 Replies
View Related
Apr 1, 2011
I've tried installing the purchased downloaded version of the software to two different Windows 7 64 machines and installation just stops on the first screen. "Next" never becomes active. Corel told me to delete my temp files and I've done that, to no avail. I had the same thing happen with the trial version and just figured that they would have fixed the for sale version.
Is there a cleaning or prep patch for this one?
View 5 Replies
View Related
May 21, 2012
My video studio pro x5 plays for 2 seconds and then stops in my timeline. This occurs after I've splt and deleted some audio and/or put in a transition. Here are my computer specs:
Brand: Dell Laptop
Processsor Intel(R) Cor (TM) i7 CPU Q820 #1.73GHz 1.73GHz
Ram: 8GB
System Type: 64 Bit Operating System
Pen and Touch: Pen and Touch is available through 80 touch points
View 4 Replies
View Related
Mar 17, 2012
I upgraded to X5 specifically for m2t 1980x1080 50p rendering but when it reaches between 50%-60% it stops. No error message comes up and the program doesn't shut down, just goes back to the "Share" screen.
I am currently trying to render a 23 minute slideshow containing only JPEGS, no video. After 3 tries using slightly different rendering settings each time, I tried a 13 minute video containing 50p Full HD video and that seemed to render fine. I am using a Toshiba Satellite L500 laptop but as far as i can tell it is within the minimum requirements for X5.
The last settings I used to render mt2 were:
1980x1080 @ 50 fps
PAL HDMV
Quality- 70
Video Format -MPEG-2 (also have tried H.264)
Video Data Rate - Variable 25000kbps
View 14 Replies
View Related
Apr 15, 2014
When I preview my comp the time indicator goes back to the beginning once it reaches the end, Is there a way so that it stops at the end of the work area or timeline? Its not on loop, its on play once but I don't want it to go back.
View 1 Replies
View Related
Apr 23, 2013
I am using Video StudioPro X4 and rendering a video that is about 15 minutes when it stops at 4% complete, showing the following words: Cannot read audio (0x80004005). Other numbers on the message are: (18300:8000:192). Is there a way to know why it will not continue rendering and/or which audio files to check?
View 3 Replies
View Related
Mar 21, 2011
I am using VideoStudio Pro X3 on my Windows XP Pro machine (see profile for specifics) to capture and edit video from my Canon Elura 100 MiniDV Camcorder. The problem I am having is that VS Pro X3 is stopping the capture during scene changes. It stops both the software and the camera. This does NOT happen on every scene change, but happens at differing times throughout the tape. It requires me to restart the capture from that scene forward. This happens regardless of whether or not I have the 'Split by Scene' option enabled. It is frustrating to have to sit through the entire tape restarting the capture at various scene changes. Previous tapes I have used Windows Movie Maker to capture the video. I have tried WMM to capture these tapes and it does work successfully without stopping at scene transitions. A related question is on Data Rate. The data rate listed under the properties menu in VS Pro X3 is almost 2x for the clips captured with VS Pro X3 vs the same clip captured with WMM while all other attributes are the same (including file size)?
View 4 Replies
View Related
Jun 23, 2012
I have already more than 100 projects running under VS X4 it is problematic to jump to other software, also because of spending 2 years studying Corel VS.I have found now (2 years to late) the top very stable professional software with Edius 6.06.
What happens.... In new installed VS X4 if i put a videofile on the timeline and go to SHARE >MAKING VIDEOFILE MENU....the computer breaks down, and gives the error: " VS X4 does not work anymore..... " and stops working, realy breaking down....
Have tryed it lots of times, it looks like at installing the program, the link to the output formats is not there and VS X4 does not now how to handle.....Yes I am going over to the professional software edius 6, but with a usermanual with 1000 pages i need studying at least one year on that....
View 2 Replies
View Related
Dec 22, 2011
Using VideoStudio X4. I Have a JVC VHS unit which captures video perfectly fine. It's connected via firewire from the JVC unit into a firewire 2 adapter and into the iMac. However I also have a Sony 8mm playerGV - D800E unit which plays back via the preview pain on X4 fine, but as soon as you hit capture, it runs for 9 seconds and stops and it does capture 9 seconds of footage. I've run the Sony unit with other apps and it works fine. Just with X4 I have issues with. Tried switching between DVD (array of differnt setting) and DV (Type1 and 2) but with no luck.
I also tried connecting the Digital Sony 8MM player via a video capture device (Canopus ADVC110), same result. It captures video for 9 seconds, VS stops capturing, and the player continues and play's back on the viewer in VS.
View 1 Replies
View Related
Jun 8, 2011
I am trying to complete my first project in X3 with a new computer. I have done many projects on an older computer with VS 10. I X3 stops working during the rendering process everytime I try to make a video file. I'm making a 4:3 mpeg 2 file (DVD). I have tried several different ways and the most I can get done is 24%. i have tried to cut out a clip..I get a dump file each time that it tells me to send to Corel.
View 5 Replies
View Related
Dec 1, 2012
My HP had win 7 pro issues and then blew its motherboard so i replaced it. I reloaded Video Studio Pro X3 which worked fine until I tried to save the edited video as a mpeg-4 HD (to be converted into an AVI later). It starts saving and then shut downs informing me to contact Corel and give them the data dump to figure out what the problem is. of course, i can not contact Corel who directed me to this forum. I did download and install the critical update but the same error occurs.
View 14 Replies
View Related
May 30, 2012
I have been using Ulead VideoStudio / Corel VideoStudio since the 4SE version and made all upgrades, up to X4.On April 1, 2012, I purchased then the UG from VS X4 Pro to VS X5 Pro and downloaded the software through the link provided by Corel.
I start the installation, enter the S/N of X5 and X4 (because I purchased an upgrade).But installation always stops with an error message at the following step: "Please wait while we configure Microsoft Visual C+++ 2005 Redistributable"
The error message is: "1: ALLUSERS property is not 1 - this MSM cannot be used for a per-user or fallback-to-per-user install".
What I already tried so far...I already uninstalled VS X4 and used the "VS_Cleanup", but the error persists. Meanwhile, I contacted Corel support, and they recommended to uninstall Microsoft Visual C++ and then to re-install it. I followed their instructions and uninstalled all instances of Microsoft Visual C++ and then re-installed the latest version, i.e. Microsoft Visual C++ 2010 SP1 (x64).However, the same problem persists.
Meanwhile, I tried many other approaches: I moved the installation file (.exe file) to the desktop and tried the installation from there, I tried the installation as another user (equally with administrator rights), I tried to install under Windows Safe Mode (this failed, since some necessary drivers or software was apparently not loaded), removed any remaining traces of VS X4 manually and made a registry clean up, etc.Note also that all latest updates of Windows and related software are made.
I also re-downloaded the installation file, in order to make sure there is no problem with a corrupt installation file.
Video standard: PAL/SECAM, manually selected during the installation process.
View 4 Replies
View Related
Aug 5, 2011
The problem I run into with 3DClip is that once my 3D model reaches a certain size I loose the visualization of my clipping boundaries. I can watch my viewport change as move the clipping plane but don't see a handy dandy line to show where exactly it is clipping.
Now if I could just get my front clipping plane to show up white, blue, yellow, or any color other than black given my black background!
View 6 Replies
View Related
Dec 28, 2012
I have been having a problem with large file being burned onto a DL dvd disc. Eery once in a while when I try to burn the file it will go so far and then stop with a unspecified error 5.0.0 cannot complete. It will work sometimes and at other times it will quit working. I have been using verbatum DVD+R DL disc which have worked but not all the time. It is frustrating throwing away disc because it is getting an error.
View 2 Replies
View Related
Feb 23, 2013
I have created a project and have gotton far into it. All of a sudden on playback it stops in the same spot. I tried deleting the frame ans reinserting the picture but nothing seems to work? On previous playbacks along the project creation it didn't stop. Is this a bug?
View 2 Replies
View Related
Feb 6, 2010
I just installed VS X3 and I'm very impressed with the improved AVCHD editing capabilities. Unfortunately, I'm having a problem with the output. When I import a single AVCHD 1920 clip from my Canon HF100 to my VS X3 project, perform a simple trimming operation, and then save back to the same format as the original clip (no re-rendering), the output file is virtually unplayable. It will usually start playing okay, but after 5-10 seconds start stuttering and even stop playing altogether for 10-15 seconds at a time. I've tried several different players. This problem affects ONLY the output from VS X3. The original footage in the same format plays just fine in any player.
I reverted back to VS X2, tried the same operation with the same clip, and the output is just fine. This must not be a widespread problem, because I searched the forum briefly and couldn't find similar reports. I can continue using VS X2 for the time being, but I really wish I could take advantage of the editing improvements in X3.
View 14 Replies
View Related
Jan 3, 2013
I tried to install Photoshop CS6. I used the Adobe Download Assistant. During first try of installation my battery of the notebook broke down - I accidentally forgot the charger..When I try now again an installation the Download part with the Assistant works fine but during installation the process does not continue anymore after this step ..The "progress-bar" of this dialog completes but after this nothing happens.
I tried this several times.I also tried to clean the registry (Ccleaner) - no success.
My notebook:
Acer Aspire 5920G
Win7 32bit
Photoshop CS6 via Adobe Dowload Assistant
View 2 Replies
View Related
Jul 11, 2013
I got a Problem the Installation of Photoshop CC stop at 64 % . But why?
View 3 Replies
View Related
Oct 30, 2013
System Information
Windows 8 x64
AOC 2243fW 1920x1080 monitor (x2)
Processor: Intel Core i3 2120 3.40GHz (Dual Core)
Ram: 6GB
GPU: nVidia geForce GTX 760 TI 2GB DDR5
Notes:
Photoshop is up to date.
Performance settings in photoshop are set correctly.
Monitor Profiles are not defective.
Images/Files are not corrupted.
Issue:
After a fresh restart of my PC Photoshop will function as normal for a short while (1hr appx.) after that it ceases to import/export or do any of it's intended functions. I CANNOT import ANY files. I am not presented with any error messages and it simply doesn't work. Buttons appear to highlight and the toolbars are still accessible, however I cannot continue with my work. If I then restart my computer it will function for a short while again then this will happen.
Things I have done:
Reinstalled Photoshop CS6
Deleted Preferences (Multiple Times)
Contacted Adobe Support in which case they failed to fix the problem.
View 3 Replies
View Related
Feb 9, 2009
after a serious virus attack Photoshop CS4 stops loading at message "Measuring Memory".
View 5 Replies
View Related
Jul 11, 2013
I just downloaded a trial for 3Ds Max 2014, and am now trying to render an animation.My problem occurs when the first frame has been rendered. It just stops there.I can close everything except the rendering window, where the "total animation" is empty but "current task" is full.
Why it just stops rendering?I have set the render setup for a specific range and set it to save the animation as an avi file.
View 3 Replies
View Related
Nov 1, 2013
i'm in illustrator cs3, and even tho my stops in my gradeint are true black (it even shows true black on the stops), in the gradient itself, it's that horrible cmyk grey.
when trying to use blending modes and masks because it treats what's supposed to be black like the grey I'm getting, so things always look a little off. My document's in RGB mode and i havent found any other fixes...
View 9 Replies
View Related
Aug 3, 2013
Lightroom stops importing, the progress bar stops moving. After quiting Lightroom and trying to sync the folder it happens again. There are no strange fileformats in the folder, just straight JPG and XMP. This is pretty annoying - such a basic functionality should work out of the box.
I've read that the german character "ß" could be the cause (so every file tagged with German Street Names in it will stop LR from working! Excellent.) – and the release candidate 5.2 should fix the issue. BUT: I am not very fond of installing a release candidate; what happens later, when the final version is released? Does the automatic update function its job? Or do i have to fiddle once more to get the final version working?
View 2 Replies
View Related
Mar 5, 2013
I'm running CS5 in Windows 7 64-bit.
I've been running into an odd problem using the Animation window and Transforms. If I select an area then try to Transform it (using either Free Transform shortcut or the Move tool with "show transform controls" enabled), the canvas and navigator stop refreshing. I can still pan around the canvas and draw on selected layers, but those are the only operations that get the screen to refresh. Changing frames, turning on/off layers, and hitting Undo will still perform those actions but the results aren't displayed on screen until I pan the canvas.
If I have multiple files open, all of them are effected in this way. Quitting then restarting PS gets rid of the refreshing problem, but if I use the Transform tool in a file this problem has occurred in, the same thing happens.
This doesn't happen until I've been working on a file for a long time (at least an hour or so), regardless of file size as far as I've tested. The problem persists with and without OpenGL drawing enabled. I have an Nvidia GTX 560 with driver 306.97 installed.
View 4 Replies
View Related
Sep 17, 2012
While launching photoshop cs4 on windows 7 I recieve a message that says :Adobe Photoshop CS4 has stopped working.
View 1 Replies
View Related
Sep 16, 2013
I'm trying to install Photoshop CC on my sony vaio laptop ( windows 7 ) but everytime I try to install it the install process stops at 62%. I have the completeadobe master collection CS4 installed on my laptop but none of the programmes are currently running and I do have lots of disk space left.
View 3 Replies
View Related
Apr 12, 2013
My keyboard often stops working while using PS6. Not all keys, just a random few. Things like pressing T for the type tool will stop working, the arrow keys will stop working. It's driving me nuts and seriously interrupting my workflow.
Restart PSRestart MacDo something else for a bit and jump back into PS praying it might now be ok.The problem exists using the laptop keyboard alone, and while using a bluetooth(apple) keyboard.
View 2 Replies
View Related
Dec 23, 2012
I've tried multiple times and each time the installer stops at about 80-90% on the install. No error message just stops.I even tried just installing single parts of the CS4 package and the same thing. I am running Windows 8 64 bit.just trying to get photoshop installed.
View 1 Replies
View Related
Sep 17, 2013
After opening and using photoshop cs6 for a few minutes I get a box popping up saying Adobe Photoshop CS6 has stopped working. "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." So far never received any notifications about a solution. I notice that it closes soon after I try a CTRL T to select an image.
View 9 Replies
View Related
May 30, 2012
When I try to menuload a .cuix on a machine that has UAC set to high, The menu group comes in, but the toolbars associated with it do not. I know this sounds like AutoCAD support but it is .net related as the .cuix is loaded through .net. The pull down appears OK.
If I manually set UAC to it's lowest setting then they come in, is there a reason for this?[URL]
View 1 Replies
View Related
