My video studio pro x5 plays for 2 seconds and then stops in my timeline. This occurs after I've splt and deleted some audio and/or put in a transition. Here are my computer specs:
Brand: Dell Laptop
Processsor Intel(R) Cor (TM) i7 CPU Q820 #1.73GHz 1.73GHz
Ram: 8GB
System Type: 64 Bit Operating System
Pen and Touch: Pen and Touch is available through 80 touch points
Using VideoStudio X4. I Have a JVC VHS unit which captures video perfectly fine. It's connected via firewire from the JVC unit into a firewire 2 adapter and into the iMac. However I also have a Sony 8mm playerGV - D800E unit which plays back via the preview pain on X4 fine, but as soon as you hit capture, it runs for 9 seconds and stops and it does capture 9 seconds of footage. I've run the Sony unit with other apps and it works fine. Just with X4 I have issues with. Tried switching between DVD (array of differnt setting) and DV (Type1 and 2) but with no luck.
I also tried connecting the Digital Sony 8MM player via a video capture device (Canopus ADVC110), same result. It captures video for 9 seconds, VS stops capturing, and the player continues and play's back on the viewer in VS.
I've imported a wmw clip into the timeline which plays but doesn't display in the screen.
View 4 Replies View RelatedUsing Video Studio Pro X5, I edited a home video and saved my project into vsp file. When I previewed the video, it looked fine. I clicked Share, Create Disc, chose DVD, click Next, Next, Output, chose Create to Disc, and clicked Burn icon at the bottom right. It rendered for a while and completed.
When I played the DVD, the movie loops (meaning it played to the end of 15-minute video clip and did not stop, it went back to the beginning and played again and again)
After upgrading from W7 to W8 only VS X5 plays .avi videos with a jitter, other software doesn't (Powerdirector, Windows Media Players etc).
View 4 Replies View Related X4. I created a 48hz sample rate 24 bit WAV file on my portable Tascam recorder.. I am creating a sales presentation for my invention. I have brought in many different videos I created on my camera and have edited them successfully with single clip and multi clip. Also have been able to split audio out of video. adjust sections using the nodes with the sound mixer.. move audio after split to different areas on the timeline.. However I need to do some voice over work. I figured it would be much easier and better quality for me to use my tascam to create the wav's and then just drop them into the project, edit them and place them where I want them, mute the voice I have on the video..
I was able to bring the .wavs in just fine.. and while editing them in clip mode they play just fine, I can shorten them or cut them where I need too. But when I choose to play back the project with the .wav in one one of the additional sound/music tracks I get very nasty static only. None of my recorded voice is audible. click to clip mode on the wav audio and it plays perfect. I tried moving it to the voice over track area and same exact problem.
am I missing a switch function somewhere? I made sure I muted the video clips above the .wav in the timeline. The manual says to use import option to bring in audio files but I do not see an import button anywhere? missing something? seems to me the drag and drop or add to library a wave file should work.. ??
I just upgraded to Windows 8. All with Videostudio X5 is working fine, except MP3 files will not play in the Library. I get this strange hiss. If I drop the mp 3 file into the time line on any audio track and then play the project it plays fine. Wave files play fine. I did a uninstall and re-install of X5 to see If that would fix the problem.
View 3 Replies View RelatedWhen I use the timeline everything goes from 00:00sec to 00:24sec then it gabs to 01:00 and so on.... Why is that and can I change it to use 60sec instead?
View 2 Replies View RelatedI found where I can make a video backdrop for a DVD menu, but the limit appears to be 30 seconds. This is not the case in other programs. Is there a workaround?
View 7 Replies View RelatedIs there a way to apply slow motion to just a couple of seconds or so of a clip without having it apply to the whole clip?
View 3 Replies View RelatedI'm running VideoStudio X2...
Example:
Let's say that there is several seconds of a dog barking in one of my clips. The dog bark is a bit faint, so I need to boost the audio level of the dog barking. Can this be done?
I was looking for a simple piece of software to do basic but frame-precise clip editing like trimming and I learned about Corel VS. (Well, I was looking for a tool to work with less common formats like flv, f4v but...)
Anyway, I stumbled upon this message that reads like: "the current operation can't be completed because the current clip's duration is less than 3 seconds". I tried both in easy and advanced edit but I simply can't trim a clip.
[URL]
I have this problem in VS11, and was about to buy X5 thinking that the problem would be solved by now. But to be safe I thought that I better try the demo first, and now I find out it does the same thing.
2. Describe your problem: The file is a TV tuner capture from one particular channel, and every time you edit it it produces correct video, but audio with alternate 1/2 seconds of silence.
3. What devices are involved and their mode of connection?: Internal TV tuner cards (Compro and Leadtek)
4. The Version of program is being used e.g. VS11+ VS11.5+ VSX2+VSX3+VSX4+X5
5. list all patches/updates that have been installed relating to that version of the program.
VS11 updated to VS11.5 and X5 with no updates - it won't allow SP1 to install -
6. Details of the source files. Note: to obtain all the properties of a file, right click on a video file in either the VS timeline or library window.[b] Where did they originate (camcorder, internet, TV card etc) How did they get onto your hard drive (download, firewire, USB cable etc.)
Type of video e.g. MPEG2, DV, MTS, Mov, DivX, MPEG4 etc
Video data rate
Type of audio e.g. LPCM, AC3, MP3 etc
Audio data rate
I've owned X4 Pro for about a year and just now purchased X5 Pro/Ultimate. We use it for our voice over business, which on occasion needs to edit videos for very simple projects. VS seemed to fit the bill at its price point, but now I'm second guessing my decision.
The issue is the time it takes from hitting the "Play" button to the time it actually begins. I would have thought it to begin instantly. But instead it takes 2 ~ 3 seconds to start. It has been this way with both X4 and X5. Before you ask, it has been this way using the following setups:
Windows XP with both stock motherboard video and with Asus Geforce 210 (VS X4)
Windows 7 with both stock motherboard video and with newly bought MSI R6850 Cyclone 1GD5 Power Edition (both VS X4 & X5)
Types of videos used: every type of file extension I could get my hands on and every type of length (full length movies to a few second snippets).
I used many clips capture from a Sony HD Camorder.Everything's working fine in VideoStudio when I do a preview of my project.
My problem is with the exported file ; on some clip, when the clip begin the sound is muted for about 7-8 seconds, After that, the sound come back.I tried to slip the sound from the clip, remove the transition, nothing work.
Autocad freezes for a few seconds every 30-60 seconds. it did this on my previous full autocad 2011 and now on 2012. i have also had a reinstall. it also does it on the other users computers in the office and also those on LT.
the freeze is rondom. it can be triggered by commands, escape button, panning arround the drawing. The problem occurs periodically for say 1 day every few days autocad will have pauses. But other days its fast with no problems.
i have tried all the usual things for slow down. purge, audit, layerdlgmode. I do not think it is general slow down.
I have created a slide show by Inserting Media file to Timeline, Insert Photos. I then Share, and then Create Video File. This is a great product, so easy. However I noticed that the time delay on each picture frame is about 3 seconds. I have manually increased each slide to 5 seconds using the slider on the timeline. But this is cumbersome. Is there a place to change this default 3 seconds to what I want in the software? I cannot find it.
View 3 Replies View RelatedUsing VS X5 - Just making up a menu for my dvd im burning. Haven made a menu since using ..VS11+ I think it was.
All seems very very familar...similar etc and not asking it to do anything out of the ordinary which 11+ couldnt cope with ( just nowadays using all this AVCHD malaky etc )
Question -Main menu of my dvd - Why am I getting on my main menu page the begininings of my movie!!! I have my main menu setup ( bringing in a pre-made 30second clip on which I will put 'Press Play to watch movie' and/or 'chapter select'. ) When i preview my main menu page...I see the 30second clip i wanted but as it runs so too does my actual movie - at the same time.
I cant seem to find a button to ..basically..tell it not to play the movie as soon as you load the dvd but instead to wait until the 30 second main menu runs and automatically reruns etc until YOU decide to press the 'Play movie' button.
I have been doing this project in X5 and was putting a still picture at the end. When I review the project it stops about a second or so from the end. I thought it was the song, so I took that out.
I changed the picture, did the same thing. I lengthen the time on the picture, it will place and stop about the same time from the end. Doesn't matter how long the picture is playing. If I take the picture out, the video just before it plays fine. I put a picture back in, and it does the same thing? I thought the project time may be set someplace? Doesn't seem to matter because I change the timing on the picture at the end. Stops the same place?
I'm currently using Corel VideoStudio Ultimate Pro X4. Sometimes when I burn a project to DVD it does not play the whole thing. The program says "burn successful" but when I go play it on the tv it stops maybe 10 to 15 mins before it ends.
I thought it might have been the batch of Verbatim DVD-R discs that i use but now I dont think so because i'm using a new batch.
For awhile I started turning my project into an AVI file and then burn it. That actually started to work,....until now.
I've tried installing the purchased downloaded version of the software to two different Windows 7 64 machines and installation just stops on the first screen. "Next" never becomes active. Corel told me to delete my temp files and I've done that, to no avail. I had the same thing happen with the trial version and just figured that they would have fixed the for sale version.
Is there a cleaning or prep patch for this one?
I upgraded to X5 specifically for m2t 1980x1080 50p rendering but when it reaches between 50%-60% it stops. No error message comes up and the program doesn't shut down, just goes back to the "Share" screen.
I am currently trying to render a 23 minute slideshow containing only JPEGS, no video. After 3 tries using slightly different rendering settings each time, I tried a 13 minute video containing 50p Full HD video and that seemed to render fine. I am using a Toshiba Satellite L500 laptop but as far as i can tell it is within the minimum requirements for X5.
The last settings I used to render mt2 were:
1980x1080 @ 50 fps
PAL HDMV
Quality- 70
Video Format -MPEG-2 (also have tried H.264)
Video Data Rate - Variable 25000kbps
I am using Video StudioPro X4 and rendering a video that is about 15 minutes when it stops at 4% complete, showing the following words: Cannot read audio (0x80004005). Other numbers on the message are: (18300:8000:192). Is there a way to know why it will not continue rendering and/or which audio files to check?
View 3 Replies View RelatedI am using VideoStudio Pro X3 on my Windows XP Pro machine (see profile for specifics) to capture and edit video from my Canon Elura 100 MiniDV Camcorder. The problem I am having is that VS Pro X3 is stopping the capture during scene changes. It stops both the software and the camera. This does NOT happen on every scene change, but happens at differing times throughout the tape. It requires me to restart the capture from that scene forward. This happens regardless of whether or not I have the 'Split by Scene' option enabled. It is frustrating to have to sit through the entire tape restarting the capture at various scene changes. Previous tapes I have used Windows Movie Maker to capture the video. I have tried WMM to capture these tapes and it does work successfully without stopping at scene transitions. A related question is on Data Rate. The data rate listed under the properties menu in VS Pro X3 is almost 2x for the clips captured with VS Pro X3 vs the same clip captured with WMM while all other attributes are the same (including file size)?
View 4 Replies View RelatedI have already more than 100 projects running under VS X4 it is problematic to jump to other software, also because of spending 2 years studying Corel VS.I have found now (2 years to late) the top very stable professional software with Edius 6.06.
What happens.... In new installed VS X4 if i put a videofile on the timeline and go to SHARE >MAKING VIDEOFILE MENU....the computer breaks down, and gives the error: " VS X4 does not work anymore..... " and stops working, realy breaking down....
Have tryed it lots of times, it looks like at installing the program, the link to the output formats is not there and VS X4 does not now how to handle.....Yes I am going over to the professional software edius 6, but with a usermanual with 1000 pages i need studying at least one year on that....
I am trying to complete my first project in X3 with a new computer. I have done many projects on an older computer with VS 10. I X3 stops working during the rendering process everytime I try to make a video file. I'm making a 4:3 mpeg 2 file (DVD). I have tried several different ways and the most I can get done is 24%. i have tried to cut out a clip..I get a dump file each time that it tells me to send to Corel.
View 5 Replies View RelatedMy HP had win 7 pro issues and then blew its motherboard so i replaced it. I reloaded Video Studio Pro X3 which worked fine until I tried to save the edited video as a mpeg-4 HD (to be converted into an AVI later). It starts saving and then shut downs informing me to contact Corel and give them the data dump to figure out what the problem is. of course, i can not contact Corel who directed me to this forum. I did download and install the critical update but the same error occurs.
View 14 Replies View RelatedI have been using Ulead VideoStudio / Corel VideoStudio since the 4SE version and made all upgrades, up to X4.On April 1, 2012, I purchased then the UG from VS X4 Pro to VS X5 Pro and downloaded the software through the link provided by Corel.
I start the installation, enter the S/N of X5 and X4 (because I purchased an upgrade).But installation always stops with an error message at the following step: "Please wait while we configure Microsoft Visual C+++ 2005 Redistributable"
The error message is: "1: ALLUSERS property is not 1 - this MSM cannot be used for a per-user or fallback-to-per-user install".
What I already tried so far...I already uninstalled VS X4 and used the "VS_Cleanup", but the error persists. Meanwhile, I contacted Corel support, and they recommended to uninstall Microsoft Visual C++ and then to re-install it. I followed their instructions and uninstalled all instances of Microsoft Visual C++ and then re-installed the latest version, i.e. Microsoft Visual C++ 2010 SP1 (x64).However, the same problem persists.
Meanwhile, I tried many other approaches: I moved the installation file (.exe file) to the desktop and tried the installation from there, I tried the installation as another user (equally with administrator rights), I tried to install under Windows Safe Mode (this failed, since some necessary drivers or software was apparently not loaded), removed any remaining traces of VS X4 manually and made a registry clean up, etc.Note also that all latest updates of Windows and related software are made.
I also re-downloaded the installation file, in order to make sure there is no problem with a corrupt installation file.
Video standard: PAL/SECAM, manually selected during the installation process.
I have been having a problem with large file being burned onto a DL dvd disc. Eery once in a while when I try to burn the file it will go so far and then stop with a unspecified error 5.0.0 cannot complete. It will work sometimes and at other times it will quit working. I have been using verbatum DVD+R DL disc which have worked but not all the time. It is frustrating throwing away disc because it is getting an error.
View 2 Replies View RelatedI have created a project and have gotton far into it. All of a sudden on playback it stops in the same spot. I tried deleting the frame ans reinserting the picture but nothing seems to work? On previous playbacks along the project creation it didn't stop. Is this a bug?
View 2 Replies View RelatedI just installed VS X3 and I'm very impressed with the improved AVCHD editing capabilities. Unfortunately, I'm having a problem with the output. When I import a single AVCHD 1920 clip from my Canon HF100 to my VS X3 project, perform a simple trimming operation, and then save back to the same format as the original clip (no re-rendering), the output file is virtually unplayable. It will usually start playing okay, but after 5-10 seconds start stuttering and even stop playing altogether for 10-15 seconds at a time. I've tried several different players. This problem affects ONLY the output from VS X3. The original footage in the same format plays just fine in any player.
I reverted back to VS X2, tried the same operation with the same clip, and the output is just fine. This must not be a widespread problem, because I searched the forum briefly and couldn't find similar reports. I can continue using VS X2 for the time being, but I really wish I could take advantage of the editing improvements in X3.