VideoStudio :: Movie On DVD Disc Plays Non-stop?
Oct 18, 2013
Using Video Studio Pro X5, I edited a home video and saved my project into vsp file. When I previewed the video, it looked fine. I clicked Share, Create Disc, chose DVD, click Next, Next, Output, chose Create to Disc, and clicked Burn icon at the bottom right. It rendered for a while and completed.
When I played the DVD, the movie loops (meaning it played to the end of 15-minute video clip and did not stop, it went back to the beginning and played again and again)
View 1 Replies
ADVERTISEMENT
Sep 8, 2011
How do you burn a movie to a dvd disc? I created my movie, then clicked share tab. DVD factory 2010 opened up and I created my menu. After 3 hours of converting file the burn said failed with no explaination. So I then made a file of the movie. Opened vs3 again and tried to burn the saved file which was an mpg format to disc. The program doesn't recognize mpg files only vsp files. The program made the mpg file. So how do I burn the mpg file to disc?
View 3 Replies
View Related
May 27, 2013
Using VS X5 - Just making up a menu for my dvd im burning. Haven made a menu since using ..VS11+ I think it was.
All seems very very familar...similar etc and not asking it to do anything out of the ordinary which 11+ couldnt cope with ( just nowadays using all this AVCHD malaky etc )
Question -Main menu of my dvd - Why am I getting on my main menu page the begininings of my movie!!! I have my main menu setup ( bringing in a pre-made 30second clip on which I will put 'Press Play to watch movie' and/or 'chapter select'. ) When i preview my main menu page...I see the 30second clip i wanted but as it runs so too does my actual movie - at the same time.
I cant seem to find a button to ..basically..tell it not to play the movie as soon as you load the dvd but instead to wait until the 30 second main menu runs and automatically reruns etc until YOU decide to press the 'Play movie' button.
View 6 Replies
View Related
Nov 13, 2011
I've imported a wmw clip into the timeline which plays but doesn't display in the screen.
View 4 Replies
View Related
May 21, 2012
My video studio pro x5 plays for 2 seconds and then stops in my timeline. This occurs after I've splt and deleted some audio and/or put in a transition. Here are my computer specs:
Brand: Dell Laptop
Processsor Intel(R) Cor (TM) i7 CPU Q820 #1.73GHz 1.73GHz
Ram: 8GB
System Type: 64 Bit Operating System
Pen and Touch: Pen and Touch is available through 80 touch points
View 4 Replies
View Related
Nov 11, 2012
After upgrading from W7 to W8 only VS X5 plays .avi videos with a jitter, other software doesn't (Powerdirector, Windows Media Players etc).
View 4 Replies
View Related
Dec 27, 2011
X4. I created a 48hz sample rate 24 bit WAV file on my portable Tascam recorder.. I am creating a sales presentation for my invention. I have brought in many different videos I created on my camera and have edited them successfully with single clip and multi clip. Also have been able to split audio out of video. adjust sections using the nodes with the sound mixer.. move audio after split to different areas on the timeline.. However I need to do some voice over work. I figured it would be much easier and better quality for me to use my tascam to create the wav's and then just drop them into the project, edit them and place them where I want them, mute the voice I have on the video..
I was able to bring the .wavs in just fine.. and while editing them in clip mode they play just fine, I can shorten them or cut them where I need too. But when I choose to play back the project with the .wav in one one of the additional sound/music tracks I get very nasty static only. None of my recorded voice is audible. click to clip mode on the wav audio and it plays perfect. I tried moving it to the voice over track area and same exact problem.
am I missing a switch function somewhere? I made sure I muted the video clips above the .wav in the timeline. The manual says to use import option to bring in audio files but I do not see an import button anywhere? missing something? seems to me the drag and drop or add to library a wave file should work.. ??
View 2 Replies
View Related
Nov 19, 2012
I just upgraded to Windows 8. All with Videostudio X5 is working fine, except MP3 files will not play in the Library. I get this strange hiss. If I drop the mp 3 file into the time line on any audio track and then play the project it plays fine. Wave files play fine. I did a uninstall and re-install of X5 to see If that would fix the problem.
View 3 Replies
View Related
Aug 29, 2012
New Vs pro x4 user here.
I would like to save my movies as WMV files at a size of 640x480 . I found a template in the movie templates manager that has the size , however try as I might I cannot get to save the file at around 500mb's . it keeps saving the file at around 120 mbs how to adjust the save file size
View 6 Replies
View Related
Nov 28, 2013
How I can add intro movie before menu. I'm using VS Pro X6.
View 2 Replies
View Related
Apr 16, 2012
In VideoStudio Pro 4, I was able to modify the proportions of my movie : stretched it or squeeze it, in or out of proportion. I can't seem to do this in Video Studio Pro 5. A strategic admittance to promote the next "Hyper Super Ultimate" 6th version 6 ?
View 6 Replies
View Related
Dec 12, 2011
At the EDIT step, the voice level of each HD clip is in reasonable level, but during playback of the entire project the voice level droped down. Also after rendering the voice level is still low. On the other side, the voice level of imported music from audio CD doesn't changed. Is it suppose to be so? I am using the Pro X4 program.
View 8 Replies
View Related
Dec 16, 2013
I have a sequence of still jpgs I rendered out of Maya. There are 90 total. I want to throw them into the editor at 30fps and have them be in order. I have tried simply copying them all and dragging them all at once onto the timeline but that leave each image at 3-4 seconds per image and they are not in order.
I know there is other software I could use to do this but since I'll be editing the video in Video Studio I thought it would be nice to be able to do this inside of it. Is this possible with Video Studio?
View 2 Replies
View Related
Jun 14, 2011
I made a new template for creating a 30Mb/s "one keyframe/frame" MOV output content which worked well when set via custom settings. When I wanted to use my template in the "create video file" prompt, my VSX3 "needed to stop" ...and I was asked to send the .DMP file to Corel tech support. VS restarted OK, but once I selected "create video file", same story: stop.
Trying to delete form the movie template manager, same story: stop. Changing the settings to lower performance MOV in the temlate manager worked, but still same result when trying"create video file". Couldn't wait for the Corel support. Full reinstall solved the problem.
View 3 Replies
View Related
Oct 6, 2010
I'm trying to remove a watermark in an old movie made of my son in high school (about 8 yrs old), by a friend of his. It's right in the middle of the screen in bright red. They didn't care about it back then as it allowed them to format their movie online. Before I put this very short clip in my memorial video I want to clear that out. Don't know what original software was used. My son's friend can't remember either. Does Videostudio have a way to fix this?
View 2 Replies
View Related
Oct 11, 2010
Where is Get more link for Movie Factory 7 SE?
I think that I have to re-install this, as I don't think it is properly installed
View 6 Replies
View Related
Jan 10, 2011
I've been trying to find the right tool for this job for over a year (Premiere Elements, Cyberlink, Corel, etc.) and in some way or another, they all let me down (usually during the rendering process). I have an LG Blu-ray burner I bought a year ago (all my software is up to date with the latest device drivers). I have created one blu-ray disc, a very simple one as a test and it works, but I can't remember the software I used. This weekend I tried using VideoStudio pro X3. When I went to the Share tab and clicked create disc, it launch dvd factory 2010 (I think) and blu-ray was not a format choice. I made sure my version (although trial) was fully up to date with all the latest updates.
View 6 Replies
View Related
Nov 18, 2010
Operating System: Win Vista Home
32 bit or 64 bit: 64bit
Motherboard: Unknown (HP Pavilion m9350f)
Processor: AMD Phenom 9850 Quad
Ram: 6GB
Video Card:
Sound Card:
Hard Drive Capacity: 750GB
System Drive:
I have VideoStudio Pro X2. Purchase late last year to create a 50th wedding anniversary video for my parents. Worked great, able to mix video, add music, able to copy to DVDs, etc.
I haven't opened it for a while, until today. I tried to make another copy of the video on a DVD tonight, the window pops up, it says the video is loading, but the video never comes up. When I try to click on the popup (anywhere), it says the program stopped working and MS will shut it down (gives me the option to shutdown or continue).
I downloaded SP1 as well. Still same issue.
The video will play fine in the edit mode. I tried to copy another video compilation that I made a year ago (same timeframe) and it worked fine.
View 4 Replies
View Related
Apr 18, 2011
I've read several topics here on the Instant Project templates. I'm working my way through the VS Pro X4 trial and about to purchase it just have a couple of remaining questions.
The trial I'm using has a very limited set of DVD templates for use when burning a DVD disc. I assume these are different than the Instant Project templates that I've read about here?
If they are different than the Instant Project templates are there DVD templates for download? I assume they're only available for a fully licensed install?
View 2 Replies
View Related
Nov 29, 2011
I'm using the currently the VS X4 trial version for evaluation purpose. So first I want to modify a BluRay-Disc in 3 Steps:
- import material from disc
- cut some scenes
- re-create disc (or finally burn it)
Unfortunateley I'm unable to finish task one: I didn't found out, how to import the BluRay-Disc: I tried with 'import Digital-Media' but whatever I choose in selection dialog (drive where the disc is located, a dubdirectory from the disc, etc.), VS always respond 'No valid content found'.
How can I accomplish to import the movie materials from the BluRayDisc?
View 3 Replies
View Related
Jul 26, 2011
I currently have the trial version of Video Studio Pro X4. I would like to purchase it if I can complete a project and burn to DVD. I was able to create and edit a video of a recent concert at our church that looks great. I went through the steps of Create Disc and burn to DVD of the 2 Hour video (It took over 12 Hours to burn). The DVD seems to play on the computer with no problem, but when I try to play it on a DVD player attached to the TV, it says there is no disc, the player does not recognize the DVD. I used a Memorex DVD+R DL 8x 8.5GB 240 Min. (double layer). I have promised many people I would provide them a DVD of the concert. What do I need to do to produce a DVD that will play on a DVD player through the TV?
View 9 Replies
View Related
Oct 28, 2010
I have a short project to burn to DVD. I have it in AVCHD format as well as downconverted for standard DVD. This is my normal procedure, so that I can burn a high def disc for myself, and a standard disc for friends and family. I have done this many times before, but this time, whether AVCHD or standard DVD, I get "Unspecified error" when I hit the burn button. I am observing best practice - there is nothing in the timeline, and the settings (the little gear icon) match the video clip. This piece is only about 8 mins long - much shorter than my normal pieces, but I can't see that would make a difference.
I considered burning them in Roxio or Power2Go, but both programs insist on including Menus, which I definitely don't want.
View 3 Replies
View Related
Sep 20, 2011
I have been happily using this program for a few weeks and have nice movies and view well on PC. Only problem I find is being able to save a Movie to dvd to play on a dvd player. The only way I can do it is to save the movie as a video file and then burn to disc using Windows DVD Maker. As far as I can see I have tried all options on Video Studio, and have had no success at all.
View 5 Replies
View Related
Dec 20, 2011
I am using Video Studio V12.0.98.0 (Pro X2)
I can successfully output an .mpg file for a Windows 7 laptop attached to a LG BX324 Projector [URL]
I use Share | Create Video File | HDV | HDV 1080i 50i for HDV option to achieve this.
I would like to output a movie suitable for an Apple Computer, in frame height 1080 x 1440, as this presentation is for a lecture theatre.
Currently, I do not have access to this Apple computer. I am trying to play a movie generated by Video Studio on my Win 7 PC using my Windows QuickTime Player 7.7.1.
May I ask, is this the way I can test if I can successfully generate a movie suitable for an Apple computer using my Win7 PC?
I've been stumbling around with the share options, but all I seem to be generating is movies of a small size e.g 576 x 720.
Which Share settings should I be using for movie of 1080 x 1440?
View 4 Replies
View Related
Jan 24, 2012
I edited some video for my daughter's drama class and burned a disk for her. When my daughter presented for the class on her teacher's computer there was text covering the video that seemingly had nothing to do with the video. I can't reproduce it and I don't even know what kind of system the teacher uses, but is there some trick to burning a disk so that it displays the same on anything and everything?
View 1 Replies
View Related
Mar 28, 2012
I have a number of panoramic images that I'd like to add to a movie with videostudio but I can't seem to figure out how to pan them properly... the images are long and narrow (as would be expected). is there any way that I can use them with out have a big black boarder top and bottom?
View 3 Replies
View Related
Nov 9, 2010
How do you convert a sequence of images, say PNG files to a movie in VideoStudio Pro X3?
View 7 Replies
View Related
Jun 7, 2012
I have tried burning a Blu-ray disk using Movie Fatory 7 without any success. First of all I tried to burn an mpeg file to the disk (File Format not supported message in DVD Movie Factory), then in VS4 I tried "create video file" as a blu-ray format PAL Mpeg2 1920x1080 in VS4 - then went to "Create Disc" opened DVD Movie Factory 7 and selected BluRay, (File Format not supported message in DVD Movie Factory), so then I searched these forums and found that it looked like I should create a AVCHD file format in VS4 PAL HD 1920, so I did that and then went to "Create Disc" and got the same error message that file is not supported.
How do I create a BluRay disc that will play in a bluray machine? I have bought blank BluRay discs, but Movie Factory won't burn my file formats?
View 12 Replies
View Related
Jan 22, 2012
It is always a pleasure as well as informative experience. My question is simple I would like to incorporate a Powerpoint presentation to my video project. Is this possible? If so how would I go about uploading the PP files to Video Studio Pro x4? Or even better Is there any way for me to create Power point like video screens with Video Studio Pro x4 editing or templates?
View 2 Replies
View Related
Jul 27, 2012
I cannot fade out the sound at the end of my movie.
I have just bought VideoStudio X5 and added the SP1. On my first try, I have added a MP3 file on my silent movie, on the music track.
On this track, I have shortened the music to the end of the movie and with the sound properties panel displayed, I have click the fadeout button which is now on. But when I test my movie or when I generate a video file, the music doesn't fade out and stops suddenly at the end of the movie.
View 3 Replies
View Related
Jul 1, 2012
The movie clips in my "project" are not playing the audio. Yes, volume is on and I have ensured that the volume is all the way up and that the "mute" option has not been selected. Screen cap is attached of the video tab.
When I click on the individual "clip" the sound works no problem. The other audio files are also working no problem.
I should mention that the original file was an IFO file from a Sony Handicam that I converted to AVI which I dragged into the program.
why the clips are not playing the audio?
View 2 Replies
View Related
