VideoStudio :: Add Intro Movie Before Menu
Nov 28, 2013How I can add intro movie before menu. I'm using VS Pro X6.
View 2 Replies
ADVERTISEMENT
VideoStudio :: Main Menu Plays Movie As Well As Menu Clip?
May 27, 2013Using VS X5 - Just making up a menu for my dvd im burning. Haven made a menu since using ..VS11+ I think it was.
All seems very very familar...similar etc and not asking it to do anything out of the ordinary which 11+ couldnt cope with ( just nowadays using all this AVCHD malaky etc )
Question -Main menu of my dvd - Why am I getting on my main menu page the begininings of my movie!!! I have my main menu setup ( bringing in a pre-made 30second clip on which I will put 'Press Play to watch movie' and/or 'chapter select'. ) When i preview my main menu page...I see the 30second clip i wanted but as it runs so too does my actual movie - at the same time.
I cant seem to find a button to ..basically..tell it not to play the movie as soon as you load the dvd but instead to wait until the 30 second main menu runs and automatically reruns etc until YOU decide to press the 'Play movie' button.
VideoStudio :: No Title Menu - Movie Just Start To Play
Jun 14, 2012On the two movies that I have created DVD's for, I have the same problem on both.
When I play them on my DVD player, they do not go to the Menu (Title Page), instead both just start to play the movie. I can only get to the Menu page by pressing 'Menu' on my remote.
VideoStudio :: Share Step Intro Screen Sound Volume Level?
Mar 24, 2011I have been meaning to ask this question when using previous versions but forgot so here goes Now using ProX4 (boxed upgrade) and it has the same prob as with previous versions namely that when on the Share step and adding a music file to one of the Gallery intro scenes I have not found any way to control the volume of that sound as it blares out LOUD on preview and in the final DVD video. If the viewer of the DVD video subsequently lowers that sound level then the sound level is too low for the following video. I have made a sound file at the sound level I need but even that is ignored and the sound on the intro screen is LOUD again. Corel Support advised me that I can adjust the volume when in the preview prior to butning but that does not affect the level on the final DVDF.
View 14 Replies View RelatedVideoStudio :: Pro X4 Saving Movie As WMV?
Aug 29, 2012New Vs pro x4 user here.
I would like to save my movies as WMV files at a size of 640x480 . I found a template in the movie templates manager that has the size , however try as I might I cannot get to save the file at around 500mb's . it keeps saving the file at around 120 mbs how to adjust the save file size
VideoStudio :: Modifying Movie Proportion
Apr 16, 2012In VideoStudio Pro 4, I was able to modify the proportions of my movie : stretched it or squeeze it, in or out of proportion. I can't seem to do this in Video Studio Pro 5. A strategic admittance to promote the next "Hyper Super Ultimate" 6th version 6 ?
View 6 Replies View RelatedVideoStudio :: Voice Level In HD Movie?
Dec 12, 2011At the EDIT step, the voice level of each HD clip is in reasonable level, but during playback of the entire project the voice level droped down. Also after rendering the voice level is still low. On the other side, the voice level of imported music from audio CD doesn't changed. Is it suppose to be so? I am using the Pro X4 program.
View 8 Replies View RelatedVideoStudio :: Turn 90 JPGs Into A Movie
Dec 16, 2013I have a sequence of still jpgs I rendered out of Maya. There are 90 total. I want to throw them into the editor at 30fps and have them be in order. I have tried simply copying them all and dragging them all at once onto the timeline but that leave each image at 3-4 seconds per image and they are not in order.
I know there is other software I could use to do this but since I'll be editing the video in Video Studio I thought it would be nice to be able to do this inside of it. Is this possible with Video Studio?
VideoStudio :: Movie Template Manager
Jun 14, 2011I made a new template for creating a 30Mb/s "one keyframe/frame" MOV output content which worked well when set via custom settings. When I wanted to use my template in the "create video file" prompt, my VSX3 "needed to stop" ...and I was asked to send the .DMP file to Corel tech support. VS restarted OK, but once I selected "create video file", same story: stop.
Trying to delete form the movie template manager, same story: stop. Changing the settings to lower performance MOV in the temlate manager worked, but still same result when trying"create video file". Couldn't wait for the Corel support. Full reinstall solved the problem.
VideoStudio :: How To Remove Watermark In Old Movie
Oct 6, 2010I'm trying to remove a watermark in an old movie made of my son in high school (about 8 yrs old), by a friend of his. It's right in the middle of the screen in bright red. They didn't care about it back then as it allowed them to format their movie online. Before I put this very short clip in my memorial video I want to clear that out. Don't know what original software was used. My son's friend can't remember either. Does Videostudio have a way to fix this?
View 2 Replies View RelatedVideoStudio :: Where Is Get More Link For Movie Factory 7 SE
Oct 11, 2010Where is Get more link for Movie Factory 7 SE?
I think that I have to re-install this, as I don't think it is properly installed
VideoStudio :: Burn Movie To Disc?
Sep 8, 2011How do you burn a movie to a dvd disc? I created my movie, then clicked share tab. DVD factory 2010 opened up and I created my menu. After 3 hours of converting file the burn said failed with no explaination. So I then made a file of the movie. Opened vs3 again and tried to burn the saved file which was an mpg format to disc. The program doesn't recognize mpg files only vsp files. The program made the mpg file. So how do I burn the mpg file to disc?
View 3 Replies View RelatedVideoStudio :: Movie On DVD Disc Plays Non-stop?
Oct 18, 2013Using Video Studio Pro X5, I edited a home video and saved my project into vsp file. When I previewed the video, it looked fine. I clicked Share, Create Disc, chose DVD, click Next, Next, Output, chose Create to Disc, and clicked Burn icon at the bottom right. It rendered for a while and completed.
When I played the DVD, the movie loops (meaning it played to the end of 15-minute video clip and did not stop, it went back to the beginning and played again and again)
VideoStudio :: Unable To Play Movie On DVD Player
Sep 20, 2011I have been happily using this program for a few weeks and have nice movies and view well on PC. Only problem I find is being able to save a Movie to dvd to play on a dvd player. The only way I can do it is to save the movie as a video file and then burn to disc using Windows DVD Maker. As far as I can see I have tried all options on Video Studio, and have had no success at all.
View 5 Replies View RelatedVideoStudio :: Using 12 To Generate Movie For Apple PC On Win7 PC
Dec 20, 2011I am using Video Studio V12.0.98.0 (Pro X2)
I can successfully output an .mpg file for a Windows 7 laptop attached to a LG BX324 Projector [URL]
I use Share | Create Video File | HDV | HDV 1080i 50i for HDV option to achieve this.
I would like to output a movie suitable for an Apple Computer, in frame height 1080 x 1440, as this presentation is for a lecture theatre.
Currently, I do not have access to this Apple computer. I am trying to play a movie generated by Video Studio on my Win 7 PC using my Windows QuickTime Player 7.7.1.
May I ask, is this the way I can test if I can successfully generate a movie suitable for an Apple computer using my Win7 PC?
I've been stumbling around with the share options, but all I seem to be generating is movies of a small size e.g 576 x 720.
Which Share settings should I be using for movie of 1080 x 1440?
VideoStudio :: Burned Movie Displays Text Over Everything
Jan 24, 2012I edited some video for my daughter's drama class and burned a disk for her. When my daughter presented for the class on her teacher's computer there was text covering the video that seemingly had nothing to do with the video. I can't reproduce it and I don't even know what kind of system the teacher uses, but is there some trick to burning a disk so that it displays the same on anything and everything?
View 1 Replies View RelatedVideoStudio :: Incorporate Panoramic Images In A Movie
Mar 28, 2012I have a number of panoramic images that I'd like to add to a movie with videostudio but I can't seem to figure out how to pan them properly... the images are long and narrow (as would be expected). is there any way that I can use them with out have a big black boarder top and bottom?
View 3 Replies View RelatedVideoStudio :: Convert Image Sequence To Movie?
Nov 9, 2010How do you convert a sequence of images, say PNG files to a movie in VideoStudio Pro X3?
View 7 Replies View RelatedVideoStudio :: Burning Blu-ray Disk In Movie Factory?
Jun 7, 2012I have tried burning a Blu-ray disk using Movie Fatory 7 without any success. First of all I tried to burn an mpeg file to the disk (File Format not supported message in DVD Movie Factory), then in VS4 I tried "create video file" as a blu-ray format PAL Mpeg2 1920x1080 in VS4 - then went to "Create Disc" opened DVD Movie Factory 7 and selected BluRay, (File Format not supported message in DVD Movie Factory), so then I searched these forums and found that it looked like I should create a AVCHD file format in VS4 PAL HD 1920, so I did that and then went to "Create Disc" and got the same error message that file is not supported.
How do I create a BluRay disc that will play in a bluray machine? I have bought blank BluRay discs, but Movie Factory won't burn my file formats?
VideoStudio :: Upload PowerPoint Presentation To Movie
Jan 22, 2012It is always a pleasure as well as informative experience. My question is simple I would like to incorporate a Powerpoint presentation to my video project. Is this possible? If so how would I go about uploading the PP files to Video Studio Pro x4? Or even better Is there any way for me to create Power point like video screens with Video Studio Pro x4 editing or templates?
View 2 Replies View RelatedVideoStudio :: Unable To Fadeout Sound At End Of Movie
Jul 27, 2012I cannot fade out the sound at the end of my movie.
I have just bought VideoStudio X5 and added the SP1. On my first try, I have added a MP3 file on my silent movie, on the music track.
On this track, I have shortened the music to the end of the movie and with the sound properties panel displayed, I have click the fadeout button which is now on. But when I test my movie or when I generate a video file, the music doesn't fade out and stops suddenly at the end of the movie.
VideoStudio :: Movie Clip Sound Not Playing In X4?
Jul 1, 2012The movie clips in my "project" are not playing the audio. Yes, volume is on and I have ensured that the volume is all the way up and that the "mute" option has not been selected. Screen cap is attached of the video tab.
When I click on the individual "clip" the sound works no problem. The other audio files are also working no problem.
I should mention that the original file was an IFO file from a Sony Handicam that I converted to AVI which I dragged into the program.
why the clips are not playing the audio?
VideoStudio :: Rendered Movie Stutters / Is Not Smooth
Jul 19, 2012I bought the new Olympus TG-1 camera, and want to edit movies that I shoot so I downloaded trial of latest Video Studio Pro X5 to try it out. But I'm not satisfied with the quality of the rendered file. The result is not smooth. For example, I shot a short movie clip out of the window of a slow moving train. When I play the original file everything is nice and smooth, but when I import the file to Video Studio and render it (without doing anything to it, no effects or anything) the result is a stuttering movie - kind of like some frames are missing, or maybe duplicated... (Sound is just as it should, no problem there.)
Source file is .MOV (quick time) 24bits 1920x1080, 29.970 frames/sec according to file properties in Video Studio. Using GSpot i get the following: codec avc1, name H.264, 19641 kbps, 29.971 frames/sec
I've tried every format under "create video file" in Video Studio but the result is the same every time no matter what I do, although the option "Same as first video clip" is not available (it's dimmed when using clip shot with this camera). My system is PAL and I know that 29.97 fps is not PAL standard, but I also tried rendering custom format where the result was a 720x576 clip with 29.971fps (but kpbs is only 1024) but still the same stuttering movie.
VideoStudio :: Write Movie To File Instead Of Disk
Feb 10, 2011With prior versions of VideoStudeo I could create a movie and write it to a folder instead of a desk. I used this to preview movies before burning them. How to do this in X3. Neither DVD Factory nor Burn have this option.
View 6 Replies View RelatedVideoStudio :: X4 - Make Movie Templates Manager And MOV?
Oct 4, 2011I have uploaded a trail version of X4 and so far so good. I am importing canon 7d footage and so far no problem. The problem is that the "Make Movie Templates Manager" seems to be playing up when rendering to MOV MPEG4 as I cannot change the "Quality" bar of the options, meaning it does change on the template options but the rendered file is either to small and visually bad or its the other extreme where the file size is the same size as the imported file. So in otherwards the "Quality" slider has no effect only extreme left or right. I have the smart render switched off as per other posts I have been reading to try and troubleshoot. Deleteing the template and recreating it also seems to do nothing. It's like it saves the setting and does not allow further changes at all!
The footage from the camera is 1920x1080 23.976fps. Setting also attached as temp3.
Attached is the settings for the templates. If I can't have control over the render settings, then what is the point of buying this product. I have also tried the presets and there is a noticable decline in quality especially when it comes to motion i.e pans or zoom out, they become jittery. The mov container seems not to be affected when rendered with this degradation..
VideoStudio :: Creating Custom Movie Template
Nov 9, 2010I am struggling to make a custom movie template for sharing to a video file. I use the menu Setting, Make Movie Template Manager.What I want to make is:
- Compression: H.264
- Resolution: 800 x 480
- Audio: AAC Stereo
- Video bitrate: 1500
- Container: MPEG-4
But it seems I cannot use this X3 software for that. Especially the resolution, why the "custom" resolution is greyed out (disabled)?The reason for the above movie template is for playing on Android mobile phone.
VideoStudio :: X4 Burned Movie Doesnt Fit TV Screen
Jan 12, 2012I tried to burn a movie to my tv screen in VS Pro X4. i used 4:3 aspect ratio but when i took the DVD to view on my tv, i saw 4 black borders around the movie on my tv screen, the borders were on top, bottom and both the right and left side. I tried both 16:9 and 4:3 in VS x4 and both had the same results 4 black borders.
when i burned the same movie in VS 10 plus with 4:3 the movie fits the size of my tv screen.
why is it that VS pro X4 ultimate cant burn the movie to fit the size of my tv screen as it did in VS 10 Plus? what setting am I missing in setting in VS X4
VideoStudio :: Burning DVD - One MPEG2 Feature Length Movie
Jan 13, 2013I'm creating a DVD with just one MPEG2 feature length movie. I've selected the movie and done all the technical burn settings.
What I want is for the DVD to begin with a screen that has the options to 'Play Movie' which plays the whole thing or 'Chapters' which then goes to a chapters menu. Obviously they have to be able to get back to the option to play the whole movie.
I've separated the movie into the chapters by doing Add/Edit Chapter and clicked Next.
Am I right that Add Title Menu creates the first screen, and the Add Chapters Menu then creates the Chapters Menu? How do you have the Play Movie option - or is that just achieved by playing the first chapter (ie does it carry on with the whole movie?) With each chapter, does it proceed to play the whole of the rest of the movie after that chapter?
Also, the first chapter has a black screen thumbnail. How can I change the look (but not the actual starting point) of that chapter?
What does 'close the disc' mean? Does closing it give better copyright protection on the movie being taken off the DVD?
Finally, how do I save all these chapters and settings so I can just a burn the DVD quickly next time without creating chapters etc? (I am creating a Disk file, but can I save it as a Project?).
VideoStudio :: Batch Convert Movie In MPEG4 To MPEG2
Dec 21, 2010I recently tried to convert a 76 minute movie in mpeg 4 to mpeg 2 using the batch convert function. I first went into options and set the bit rate to 6100 kbps and the audio to Dolby 2 ch. stereo, with the bit rate set to constant. After the conversion had taken place, I found the results were excellent, except that only 38 minutes were converted. I tried it again, but still only 38 minutes and then it it finishes. Why won't it convert the full 76 minutes? The destination folder is on my "D" drive which is 1 TB, so there is lots of room.
View 3 Replies View RelatedVideoStudio :: Any Way To Produce Feathered Edge To Movie Clip?
Aug 30, 2011Any way to produce a feathered edge to a movie clip? Similar to what people often do with photographs where the outer say 30pixels fade to transparent. Can't find any way to do it in VS X2 or in virtualdub.
View 7 Replies View RelatedVideoStudio :: Movie Too Long - Cannot Burn To DVD (AVHCD Format)
Nov 29, 2011I'm new to video editing and also VS X4, but have been able to create a movie from Canon HFM 301 camera using imported clips (AVHCD). The total movie length is 1:25. When I go to burn disc, it informs me it is too long and canot fit on a single disc (4.7 GB) but there seems to be no alternatives available, for example, how to compress, etc. Do I have to manually create a second movie for a second disc? Are there settings or another step I need to take?
View 7 Replies View Related