VideoStudio :: Movie Too Long - Cannot Burn To DVD (AVHCD Format)
Nov 29, 2011
I'm new to video editing and also VS X4, but have been able to create a movie from Canon HFM 301 camera using imported clips (AVHCD). The total movie length is 1:25. When I go to burn disc, it informs me it is too long and canot fit on a single disc (4.7 GB) but there seems to be no alternatives available, for example, how to compress, etc. Do I have to manually create a second movie for a second disc? Are there settings or another step I need to take?
How do you burn a movie to a dvd disc? I created my movie, then clicked share tab. DVD factory 2010 opened up and I created my menu. After 3 hours of converting file the burn said failed with no explaination. So I then made a file of the movie. Opened vs3 again and tried to burn the saved file which was an mpg format to disc. The program doesn't recognize mpg files only vsp files. The program made the mpg file. So how do I burn the mpg file to disc?
What is the best format in which to save completed videos? Often when I go back to an old video, I get the "some files did not link properly" message. How can I prevent this?
I have converted old Family movies to DVD and am trying to download into Photoshop to edit and burn copys can this be done? Try to get done before christmas for family gifts.
What is the most safest file format for storing image data? I am thinking in terms of drive failure. Suppose you have a precious picture and you do not want it to be corrupted by a single bit failure by the drive.My undestanding is saving an image in a compressed format is most insecure because failure of a few bits can lead to gross decompression problems. My other understanding is that RAW formats that store the individual pixels are the safest. Consider 2 situations:
1. The RAW file header becomes corrupted. You can still recover data by interpolating and "guesstimating" from the existing data. 2. Actual image data becomes corrupted in a certain region of the file. You can interpolate around the lost areas to recover the image.
There are no tools that I know of that are designed to specifically accomplish 1 and 2. Honestly, if I had a precious picture, I would save it in RAW format in 2 or 3 different physical drives. Also, are there tools to recover data from corrupted photoshop psb/psd files?
Is there any way to change the format of Lat/Long in a C3D point list display from degrees, minutes, seconds to decimal degrees? I have looked pretty hard, but can't find anything. The geodetic calculator only does one item at a time, I think. Any plug-ins out there? I suppose this could be on a wish list as well.
I am using R2012.and have ended up manipulating point values in Excel-not a quick way of going about it.
I would like to save my movies as WMV files at a size of 640x480 . I found a template in the movie templates manager that has the size , however try as I might I cannot get to save the file at around 500mb's . it keeps saving the file at around 120 mbs how to adjust the save file size
In VideoStudio Pro 4, I was able to modify the proportions of my movie : stretched it or squeeze it, in or out of proportion. I can't seem to do this in Video Studio Pro 5. A strategic admittance to promote the next "Hyper Super Ultimate" 6th version 6 ?
At the EDIT step, the voice level of each HD clip is in reasonable level, but during playback of the entire project the voice level droped down. Also after rendering the voice level is still low. On the other side, the voice level of imported music from audio CD doesn't changed. Is it suppose to be so? I am using the Pro X4 program.
I have a sequence of still jpgs I rendered out of Maya. There are 90 total. I want to throw them into the editor at 30fps and have them be in order. I have tried simply copying them all and dragging them all at once onto the timeline but that leave each image at 3-4 seconds per image and they are not in order.
I know there is other software I could use to do this but since I'll be editing the video in Video Studio I thought it would be nice to be able to do this inside of it. Is this possible with Video Studio?
I made a new template for creating a 30Mb/s "one keyframe/frame" MOV output content which worked well when set via custom settings. When I wanted to use my template in the "create video file" prompt, my VSX3 "needed to stop" ...and I was asked to send the .DMP file to Corel tech support. VS restarted OK, but once I selected "create video file", same story: stop.
Trying to delete form the movie template manager, same story: stop. Changing the settings to lower performance MOV in the temlate manager worked, but still same result when trying"create video file". Couldn't wait for the Corel support. Full reinstall solved the problem.
I'm trying to remove a watermark in an old movie made of my son in high school (about 8 yrs old), by a friend of his. It's right in the middle of the screen in bright red. They didn't care about it back then as it allowed them to format their movie online. Before I put this very short clip in my memorial video I want to clear that out. Don't know what original software was used. My son's friend can't remember either. Does Videostudio have a way to fix this?
I'm using the TBYB version of X4. I have 39 video clips that were recorded on a new samsung standard def. vid cam. The native files are MP4 files. I transfered them from the SD card to my hard drive simply by dragging them over. They play fine in any version of VS.
I'm doing NOTHING fancy. No moving menus. No music on the menus. Just a main title page and enough menu pages to accommodate the 39 files. No audio normalization.
It NEVER gets to the point where it outputs to the DVD. As soon as it finishes whatever it's doing on file 39....whammo....unspecified error. It also takes 30+ minutes to render the file, never getting to the burning.
I have a 2.8ghz Quadcore CPU running Win7 64 bit Professional.
I tried this same procedure in X2. Burning completed successfully to the SAME blank DVD-RW and took approx 30 mins....so X2 on my system is faster.
Unfortunately, X2 is unusable for me with any video files OTHER than AVI files. Any other video files result in "skipping" audio as I've reported in another thread.
I've restared the project from scratch several times but to no avail. Is pointless to try X3 because it has the same audio problem for me that X2 has. My DirectX runtimes are from Oct. of 2010.
Does VS5 have the DVD burn program within it, not a separate program? I am using Corel DVD Movie Factory and also use ProX3. I prefer using my own template or rather my own jpegs for the background. Movie Factory forces me to use their templates, meaning I can't just have a jpeg in the background, have to use their gallery and I spend frustrating time moving off the template parts or hiding them, unless it's there in Movie Factory and I just didn't know how to not use something from the gallery.
Using Video Studio Pro X5, I edited a home video and saved my project into vsp file. When I previewed the video, it looked fine. I clicked Share, Create Disc, chose DVD, click Next, Next, Output, chose Create to Disc, and clicked Burn icon at the bottom right. It rendered for a while and completed.
When I played the DVD, the movie loops (meaning it played to the end of 15-minute video clip and did not stop, it went back to the beginning and played again and again)
I have been happily using this program for a few weeks and have nice movies and view well on PC. Only problem I find is being able to save a Movie to dvd to play on a dvd player. The only way I can do it is to save the movie as a video file and then burn to disc using Windows DVD Maker. As far as I can see I have tried all options on Video Studio, and have had no success at all.
I can successfully output an .mpg file for a Windows 7 laptop attached to a LG BX324 Projector [URL]
I use Share | Create Video File | HDV | HDV 1080i 50i for HDV option to achieve this.
I would like to output a movie suitable for an Apple Computer, in frame height 1080 x 1440, as this presentation is for a lecture theatre.
Currently, I do not have access to this Apple computer. I am trying to play a movie generated by Video Studio on my Win 7 PC using my Windows QuickTime Player 7.7.1.
May I ask, is this the way I can test if I can successfully generate a movie suitable for an Apple computer using my Win7 PC?
I've been stumbling around with the share options, but all I seem to be generating is movies of a small size e.g 576 x 720.
Which Share settings should I be using for movie of 1080 x 1440?
I edited some video for my daughter's drama class and burned a disk for her. When my daughter presented for the class on her teacher's computer there was text covering the video that seemingly had nothing to do with the video. I can't reproduce it and I don't even know what kind of system the teacher uses, but is there some trick to burning a disk so that it displays the same on anything and everything?
I have a number of panoramic images that I'd like to add to a movie with videostudio but I can't seem to figure out how to pan them properly... the images are long and narrow (as would be expected). is there any way that I can use them with out have a big black boarder top and bottom?
I have tried burning a Blu-ray disk using Movie Fatory 7 without any success. First of all I tried to burn an mpeg file to the disk (File Format not supported message in DVD Movie Factory), then in VS4 I tried "create video file" as a blu-ray format PAL Mpeg2 1920x1080 in VS4 - then went to "Create Disc" opened DVD Movie Factory 7 and selected BluRay, (File Format not supported message in DVD Movie Factory), so then I searched these forums and found that it looked like I should create a AVCHD file format in VS4 PAL HD 1920, so I did that and then went to "Create Disc" and got the same error message that file is not supported.
How do I create a BluRay disc that will play in a bluray machine? I have bought blank BluRay discs, but Movie Factory won't burn my file formats?
It is always a pleasure as well as informative experience. My question is simple I would like to incorporate a Powerpoint presentation to my video project. Is this possible? If so how would I go about uploading the PP files to Video Studio Pro x4? Or even better Is there any way for me to create Power point like video screens with Video Studio Pro x4 editing or templates?
I cannot fade out the sound at the end of my movie.
I have just bought VideoStudio X5 and added the SP1. On my first try, I have added a MP3 file on my silent movie, on the music track.
On this track, I have shortened the music to the end of the movie and with the sound properties panel displayed, I have click the fadeout button which is now on. But when I test my movie or when I generate a video file, the music doesn't fade out and stops suddenly at the end of the movie.
The movie clips in my "project" are not playing the audio. Yes, volume is on and I have ensured that the volume is all the way up and that the "mute" option has not been selected. Screen cap is attached of the video tab.
When I click on the individual "clip" the sound works no problem. The other audio files are also working no problem.
I should mention that the original file was an IFO file from a Sony Handicam that I converted to AVI which I dragged into the program.
I bought the new Olympus TG-1 camera, and want to edit movies that I shoot so I downloaded trial of latest Video Studio Pro X5 to try it out. But I'm not satisfied with the quality of the rendered file. The result is not smooth. For example, I shot a short movie clip out of the window of a slow moving train. When I play the original file everything is nice and smooth, but when I import the file to Video Studio and render it (without doing anything to it, no effects or anything) the result is a stuttering movie - kind of like some frames are missing, or maybe duplicated... (Sound is just as it should, no problem there.)
Source file is .MOV (quick time) 24bits 1920x1080, 29.970 frames/sec according to file properties in Video Studio. Using GSpot i get the following: codec avc1, name H.264, 19641 kbps, 29.971 frames/sec
I've tried every format under "create video file" in Video Studio but the result is the same every time no matter what I do, although the option "Same as first video clip" is not available (it's dimmed when using clip shot with this camera). My system is PAL and I know that 29.97 fps is not PAL standard, but I also tried rendering custom format where the result was a 720x576 clip with 29.971fps (but kpbs is only 1024) but still the same stuttering movie.
With prior versions of VideoStudeo I could create a movie and write it to a folder instead of a desk. I used this to preview movies before burning them. How to do this in X3. Neither DVD Factory nor Burn have this option.
I have uploaded a trail version of X4 and so far so good. I am importing canon 7d footage and so far no problem. The problem is that the "Make Movie Templates Manager" seems to be playing up when rendering to MOV MPEG4 as I cannot change the "Quality" bar of the options, meaning it does change on the template options but the rendered file is either to small and visually bad or its the other extreme where the file size is the same size as the imported file. So in otherwards the "Quality" slider has no effect only extreme left or right. I have the smart render switched off as per other posts I have been reading to try and troubleshoot. Deleteing the template and recreating it also seems to do nothing. It's like it saves the setting and does not allow further changes at all!
The footage from the camera is 1920x1080 23.976fps. Setting also attached as temp3.
Attached is the settings for the templates. If I can't have control over the render settings, then what is the point of buying this product. I have also tried the presets and there is a noticable decline in quality especially when it comes to motion i.e pans or zoom out, they become jittery. The mov container seems not to be affected when rendered with this degradation..
I am struggling to make a custom movie template for sharing to a video file. I use the menu Setting, Make Movie Template Manager.What I want to make is:
- Compression: H.264 - Resolution: 800 x 480 - Audio: AAC Stereo - Video bitrate: 1500 - Container: MPEG-4
But it seems I cannot use this X3 software for that. Especially the resolution, why the "custom" resolution is greyed out (disabled)?The reason for the above movie template is for playing on Android mobile phone.
