Photoshop :: Most Safest File Format For Long Term Storage
Jun 7, 2013
What is the most safest file format for storing image data? I am thinking in terms of drive failure. Suppose you have a precious picture and you do not want it to be corrupted by a single bit failure by the drive.My undestanding is saving an image in a compressed format is most insecure because failure of a few bits can lead to gross decompression problems. My other understanding is that RAW formats that store the individual pixels are the safest. Consider 2 situations:
1. The RAW file header becomes corrupted. You can still recover data by interpolating and "guesstimating" from the existing data.
2. Actual image data becomes corrupted in a certain region of the file. You can interpolate around the lost areas to recover the image.
There are no tools that I know of that are designed to specifically accomplish 1 and 2. Honestly, if I had a precious picture, I would save it in RAW format in 2 or 3 different physical drives. Also, are there tools to recover data from corrupted photoshop psb/psd files?
View 4 Replies
ADVERTISEMENT
Jul 23, 2013
What is the best format in which to save completed videos? Often when I go back to an old video, I get the "some files did not link properly" message. How can I prevent this?
View 6 Replies
View Related
Dec 18, 2012
Is it possible to ask Photoshop to save TIFF images using tile internal storage rather than strip storage? A little-known setting, a registry patch perhaps?
View 2 Replies
View Related
Nov 29, 2011
I'm new to video editing and also VS X4, but have been able to create a movie from Canon HFM 301 camera using imported clips (AVHCD). The total movie length is 1:25. When I go to burn disc, it informs me it is too long and canot fit on a single disc (4.7 GB) but there seems to be no alternatives available, for example, how to compress, etc. Do I have to manually create a second movie for a second disc? Are there settings or another step I need to take?
View 7 Replies
View Related
Apr 4, 2012
Is there any way to change the format of Lat/Long in a C3D point list display from degrees, minutes, seconds to decimal degrees? I have looked pretty hard, but can't find anything. The geodetic calculator only does one item at a time, I think. Any plug-ins out there? I suppose this could be on a wish list as well.
I am using R2012.and have ended up manipulating point values in Excel-not a quick way of going about it.
View 7 Replies
View Related
Sep 25, 2013
What is the best export/import format for sending 3D files. I need some neutral format files, possibly Solidworks but I am not sure. Also any export settings to make sure I get decent quality files.
Nothing like getting a surface model when you want solid model.
IV2014 sp1.2 PDSU / Sim Mech 2014 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 331.82
SpacePilot Pro 3.17.1, 6.17.7, 4.11
View 9 Replies
View Related
Dec 6, 2010
AE CS5 is saying a file path is too long when I do a collect file.The image sequence in question is only 7 directories deep -- which doesn't seem too buried considering how AE wants to structure collected files: /Volumes/HardDrive/ProjectName/CollectFileFolder/(Footage)/CompName/Pr ecompName/results/3Dimage_multipass0000.tif
Is it number of directories deep or overall number of characters in the entire path that's the issue?
View 11 Replies
View Related
Jul 11, 2013
I have photoshop Cs6 and I am trying to make an animation with an avi file that is about 4 seconds long. anyway when i import the avi file and it loads and the preview pops up and it shows half of my video has been cut off.
View 5 Replies
View Related
Mar 5, 2012
There's probably a simple explanation, but if I have a file open for a long time in Photoshop the blacks will start to appear oversaturated/blocked up. If I close and reopen file it looks normal again.
I am using OS X Lion, Photoshop 5, Apple 30" Cinema display. My monitor is calibrated with a i1 Display by X-Rite and resets according to amibent light.
View 4 Replies
View Related
Mar 14, 2012
It takes me 20 seconds to save a pdn file with many layers in it?From which component would I expect to see the most difference in speed if I buy the following components?
View 19 Replies
View Related
Nov 24, 2008
Some particular file takes very long time to open, even if the file size is very less.
View 10 Replies
View Related
Jul 19, 2012
AI seems to take a long time to save a 4 MB file. Is there some setting to make save faster? I have linked images, not embedded.
View 4 Replies
View Related
Jan 14, 2014
Can I burn a file that is 3.5 hours long on to one dvd. Also, I do not see the MPEG 1 option in Premier Pro CS6.
View 4 Replies
View Related
May 11, 2010
I am having trouble opening up cdr files as they take very long time to open (around 20-25 min per file of 5-10 MB).
Following are my system specs:
>Intel Pentium 4 - 3GHz, 2 GB RAM,
>Windows XP SP2
>Coral Draw X3 installed
I have already tried deleting unnecessary fonts, views and color styles. I also restored corel to factory defaults (using F8 key at start up) but some cdr files still take a long time to open.
View 7 Replies
View Related
Mar 2, 2012
I am on a 64 bit Windows 7 HP computer with AutoCAD 2010, and I am having a problem plotting a long (24" X 190") drawing file. We have a RICOH Aficio MP W3600 PS plotter. I have gone through the proper procedure through the Plotter Manager all the way to Select Custom Paper Sizes but the Add button is grayed out and I can't add a new user size. I was able to do this with AutoCAD 2004 on a Windows XP system but can't on this setup.
View 1 Replies
View Related
Jul 25, 2013
Have open a old max scene. And it take a very long time to save. That can have multiple reasons. Found a new (for me):
My old scene has a "render output" path to a no longer exists netzwork drive. This slow down max on save. Don't know why max access the output path on save ;( Slow down is also the Assert Tracking dialogue and "Render Output/Files..." Dialogue... Maybe max always tries to access the not existing network drive, every time ;(
View 1 Replies
View Related
May 25, 2013
Have some photos of a warehouse fire in Plymouth Indiana. Files were saved as .jpg Can't get them to open.
One message is "Pain't cannot read this file. This is not a valid bitmap file or it's format is not currently supported." Couldn’t display DSC-0023.jpg because a suitable graphics importer could not be found.
Carl Beason
Windows 7, Photoshop cs4
View 10 Replies
View Related
May 30, 2012
I am trying to open a video to edit within Photoshop CS6 x64. I am getting the following message:-
Could not place the document ‘IMG_1664.MOV’ because no parser or file format can open the file.
The video was shot on my iphone 4S and ive even tried converting to other formats yet Photoshop still gives the same error. I have checked through Bridge and I have no option to send to Photoshop on the right click menu. try out the new features of CS6 for video editing.
I am running a 27" iMac with 12gb RAM and 1gb of Video RAM.
View 8 Replies
View Related
Nov 19, 2012
Getting this error when trying to use downloaded ACTIONS. "Could not place the document ‘Photoshop_Actions_03_by_ReehBR.atn’ because no parser or file format can open the file."
View 2 Replies
View Related
Apr 21, 2013
When trying to open a raw file in PSE 5 I receive the following error message
“Could not complete your request because the file format module cannot parse the file”
I checked and my camera Nikon D3100 is listed as a supported camera.
View 1 Replies
View Related
Dec 5, 2012
I create short videos using the PS frame animation panel. I used to be able to FILE-export-render video- and choose MPEG-4 Video in the settings panel which would render my file into a small .mov file. Now in CS6 the new render video panel does not have that option. I tried the QT options in the export window and my file is hugh! The H.264 option gives me an .mp4. I put the .mp4 into my web page via Dreamweaver and my video does not play when uploaded into the sever. The video plays fine in Dreamweaver before I upload to the server. After I upload to the server I just get a Q and no video on my web page. If I render the same file in CS5 I am able to view it in my web page. ADOBE WHY DID YOU CHANGE YOUR EXPORT VIDEO RENDERING OPTIONS in CS6?
View 2 Replies
View Related
Jul 5, 2013
So since we installed CorelDraw x6 the one file we have been working on is a long text file and it slowes every thing down drasticly.We did think updating would work so we did that and it still lags.
View 4 Replies
View Related
Mar 6, 2013
I am getting this popup error when trying to open a .gif file:
"Could not complete your request because the file-format module cannot parse the file."
This comes up every time I try to open a .gif file. Even if I make a .gif file (like the image included in this post), save it and then try to open it again, I get the same error. I tried reinstalling CS4, but the error is still there. I have also done the reset on start-up and nothing. Some have suggested that I open it in (Windows XP Pro) MS Paint and then save it again. Did it and this does NOT work for me, either.
View 3 Replies
View Related
Sep 26, 2013
I am trying to open a image to edit in Photoshop CC. I am getting the following message:- Could not place the document ‘arrow_right_alt1-512’ because file-format module cannot not parse the file. I make this upper cover but when i put any image in the backgroud layer it shows me that Error
Image no.1
Image no.2
Image no.3
Image no.4
View 4 Replies
View Related
Oct 25, 2007
to convert a rather large & complicated logo in .PSD format to a Vector file, I have PS CS2 & IR CS2. Is there any way I can do it using what I already have without using the pen tool?
View 6 Replies
View Related
Nov 8, 2012
I have a vaulted project with about 1000 parts in it and a subfolder within that that has about 250 parts in it.I am told that vault does not manage references outside the project scope as defined by the IPJ which in theis case is at that 1000 part folder level.
If I go to rename the folder with 250 parts in it, it takes up to a half hour. I am having trouble believing that vault can't do better than a half hour to manage the references of a subfolder of a project with 1000 parts in it, when only 250 parts are affected.
Also, I notice a secondary ipj file is created temporarily during the renaming. That ipj appears under an inventor folder under my docs. Can't see why it takes two ipj files to manage one project. Also don't understand why there should be a local ipj file active when I am renaming at the vault level. I am suspicious that this other ipj (named after my company name, indicating a purposeful act) is expanding the scope of reference management since its parent resides at the root Vault explorer ($) separate of the projecy ipj. Also takes way too long to rename individual files.
View 2 Replies
View Related
Sep 14, 2012
When I export my 3D-project (a coffee mug) from Cinema 4D (R11) as a .3ds file to PS CS5 Extended I get the following message: "The Photoshop 3D file format could not parse this file".The odd thing is that when I export and import a simple sphere it works. I believe that there is some kind of limitation involved?
View 2 Replies
View Related
Aug 22, 2006
im trying to get som .png's to open in photoshop cs and it keeps giving me this error message.
"could not complete your request because the file-format cannot parse the file."
what does that mean?
View 2 Replies
View Related
Nov 14, 2013
I've got a catalog that work fine in LR4.4, but when I try to upgrade them to LR5 I get the error, "Lightroom couldn't update the format of its catalog file because the file appears to be damaged." The catalogs aren't damaged as they work perfectly in LR4.4. I urgently need to update them to a new mac with LR5.
View 1 Replies
View Related
Nov 7, 2013
Is it possible, in AutoLISP, to code something that will save the current file (whatever it may be, assume ..dwg or .dxf, into R2000 .dxf?
View 9 Replies
View Related
Sep 28, 2011
I am wondering if there is a way to put the old save method back into the new gimp 2.7.3. I would like to be able to export to a new file format and automatically be using that file instead of the original file that I have just opened. If there is a plugin like this that would be great.
View 2 Replies
View Related
