I've got a catalog that work fine in LR4.4, but when I try to upgrade them to LR5 I get the error, "Lightroom couldn't update the format of its catalog file because the file appears to be damaged." The catalogs aren't damaged as they work perfectly in LR4.4. I urgently need to update them to a new mac with LR5.
View 1 RepliesI get message in Lightroom when exporting the raw file. "The file appears to be unsupported or damaged (1)"
View 7 Replies View RelatedMac Powerbook Pro 10.9, Lightroom 5.2. All my files now indicate, "The file appears to be unsupported or damaged."
View 1 Replies View RelatedLR version - 4.2
OS - OS X 10.8.2
I've just moved to a new computer and also I've just started using LR4. Since moving I've had a few of my imported images display the 'The image appears to be damaged' message when in develop mode.
The image appears undamaged and I can edit and export without issue, if I copy the image on disk the copy will also cause the message to appear however when I copy the image to another computer (running Windows 7 and LR 3.3) and that doesn't report the image as damaged.
I'm not too sure what causes LR to report the image as damaged also I don't know why the image would appear damaged on one computer and not on another.
I am installing LR4. I tried to update the catalog.I received the message that LR encountered problems when trying to update the format of the catalog file and cannot use this catalog in this version of Lightroom. When I click on the See Adobe Technote button, I received the message that that file is unavailable from the Adobe Website. I don't want to loose all my catalog information from my previous instralling of LR2.7.
View 1 Replies View RelatedI have a new computer and want to move the databse catalog over. I backed up in PSE 9 to an external hard drive. I connected to HD to the new computer and tried a resotre catalog. I chose "New Location" since I was going from XP to Windows 7 and was unsure if there would be a conflict with file locations. I also chose "Restore Original Floder Strucure". Very quickly I recieve an error message "Could not restor file .xml". I have run Restore Catalog several times and each time a DIFFERENT FILE receives the error message. I then disabled Norton Anti Virus Auto-Protect. I then disabled several programs running in the background. Same problem. I then copied the Backup Catalog to the new computer and tried to Restore it from there. Same Problem. I have now run a Repair Catalog on the original file. PSE states there is no error. I want to purchas PSE 11, but wanted to install/restore the database with the same version 9 first.
View 11 Replies View RelatedI have several raw images that were imported directly from the memory card into LR5 as DNG files. They look fine in the Library mode - both in Grid and Loupe view, but when they are opened into the Develop module they have gray and pink boxes as if information is missing and I get an error message saying "image appears to be damaged".
Is it really damaged or is there a way to resolve this? When I look at the file itself through Finder it shows the damage, so I'm thinking it's damaged but somehow the previews aren't?
Just want to understand before I import again or start editing only to lose more pictures. Is it a bug?
We recently installed extra RAM only to find out it wasn't compatible with the Mac. We have the correct RAM in there now, but I don't know if I should uninstall and reinstall LR5 or if it should now be fine with the new RAM or if it's totally unrelated to the RAM.
Just update Illustrator CC and now my program won't open. Saying Missing Required Plugins – PDF File Format.
View 12 Replies View RelatedI am user for Inventor 2013 Professional.
1 year ago i created a format for my idw template file. I set many things under Drawing Resources in browser.Sheet Formats, Borders, Title Blocs, Sketch Symbols... etc. Now we want to change something in this resources and i will create new one.
My question is if i create new one, then can i update all new formats to my old idw files? I mean, i can't open all of old files and i can't change one by one. I want to do in easy way.
When I first installed Adobe Photoshop CS6 I was unable to run Photoshop or Bridge CS6. Photoshop would give me an error about "could not open a scratch file because the file is locked. If I ran either of these programs as an administrator they would run without issue, this led me to believe that there was a permission issue somewhere. After some digging I found out the both Bridge and Photoshop try to create a temp file (similiar to Photoshop Temp2777223910092) on the c: drive of the computer. In my case the user that I was logged in with did not have access to write to the root of the C: drive. Note that you run the program as the administrator and change the scratch disk location as that changes the preference for the administrator user and not the user that you are currently logged in as.
I first had to give the user that I was logged on with write permissions to the root of the C: drive. Next try and run Photoshop, you will get an error another error about the scratch disk and about and invalid or missing setting file. To correct this you need to have run Photoshop as an administrator, next you can go to Users AdminAppDataRoamingAdobeAdobe Photoshop CS6Adobe Photoshop CS6 Settings and copy Adobe Photoshop CS6 Prefs and/or Adobe Photoshop X64 CS6 Prefs to Users<your logged in username>AppDataRoamingAdobeAdobe Photoshop CS6.Adobe Photoshop CS6 Settings.
My catalog is damaged after the power of my hard disk suddenly turned off.
I was importing my images to my catalog when the power was switched off. This caused an error in LR3.
And now I can't open the catalog anymore. I already created a new one and tried to import the damaged catalog into it but this didn't worked.
My images are still ok. All I want to recover are my tags and my collections as I had spent quick some into it.
I had a blue screen while working with Lightroom and now I can not open catalog. I got this window: recover data from the directory? Option "Import from another catalog" also does not work.
View 2 Replies View RelatedUpgraded to 3.6 today. Published services Publish to Photoshelter (URL...) doesn't work. First I get: Your catalog must be updated before it can be used with the following plug-in:
and then: Could not upgrade your catalog for plug-in metadata.The plugin-specific metadata in this catalog is newer than the what the installed version of this plugin supports. That's a deal-breaker for me, unless there's a way around it.
How do I correct this error, "The catalog could not be opened due to an unexpected error."?
View 1 Replies View RelatedI don't want to have the original files on both laptop and desktop.
I want to make a copy of a Lightroom 3 catalog to put on my laptop so while on the move I can be geo-tagging and keywording to 8000 photographs. I don't want to drag an external drive with me. I just want to be able to work on the catalog metadata and have all the updates/changes stored there (on the laptop)(in the catalog) and then transfer the catalog back to the desktop (to the primary archive) and have all the updates/changes pushed back into the DNG's or the XMP sidecar files alongside the CR2's. These changes would be only keywording and possibly writing GPS data into them….NOT image edits (that would probally require access to the original image files)
As a test, I tried "exporting as catalog", TWO images (with the source images "unavailable"). I flash-drived the resulting catalog to my laptop. I opened the catalog in LR3 and made changes to the metadata. I tried both "saving metadata to file" and "updating DNG previews" (which would be useless anyway since I could not write data back to the missing originals) and also tried doing nothing and just closing LR, then pulling the flashdrive and plugging it into the DESKTOP.(knowing the changes are stored within the catalog itself only) I open the 2 picture catalog in LR and see the keyword updates. Hurrah!
I switch over to the master catalog. All I want to do is import the updated metadata (keywording, contrast, etc…) back into the master catalog and push the data into the original DNG or XMP. On import I select "replace: Metadata and develop settings only" (with or without "preserve old settings" checked) and click import. Voila! NOTHING HAPPENS and the updated keywords are NOT picked up.
I know that the metadata updates were carried out because they showed up when I opened it separately in LR! For some reason they don't seem to making through the import process to the master catalog…
I work with a company network, and everytime after do different updates in a project at the time to reopen the file appears "file not valid".
View 1 Replies View RelatedI have a student with images that wont open. A warning appears that Adobe Photoshop data appears to be damaged. Unexpected end of profile.
View 1 Replies View Relatedwhile jpg file open in photoshop, its show error message "This document contains Adobe photoshop data which appears to be damaged. Continue and ignore the photoshop data?" i click ok, then only its open, why its show error message
View 3 Replies View RelatedI have two files that should be the same color and they are maddeningly different. The RGB values of the colors are the same, they are both RGB 8-bit files, but the file with the wacky colors reads "RGB/8#" on top of it's window frame and the other reads "RGB/8*". The Color Settings are both set to sRGB IEC61966-2.1. Why? What does that number symbol mean?
View 2 Replies View RelatedIn LR 4.1 i was able to open LR by rightclicking/ open with LR 4, directly from a file in my OLY ORF map. This is no longer possible after updating to 4.2. Windows 7-32 bit.
View 4 Replies View RelatedWe are thinking about switching over to Lightroom, but 95% of our 60,000 images are EPS files. I recently used a trial version and it didn't seem to recognize my EPS files. Is there a way for Lightroom to acknowledge these files? Is there a plugin to download and try?
View 4 Replies View Relatedis it possible to add this features in the Book module of the Lightroom 4?
I understand that is possible to export in PDF file format, but sometime, in order to use online printing service, is better to have one JPG file for every page.
I think that is very simple to add this feature to te book module.
I am not the most technically savvy lady so I might have made this issue worse.
After I first installed the Creative Cloud and downloaded Photoshop, I attempted to open the program and it said "file is incomplete or damaged".
I tried deleting it out of the applications in the side folder to re-install thinking it would get rid of it but the tab is still there.How do I delete Photoshop to re-install? Is that possible?
Saving a file that will not let you save in the form it is in because of a "fatal error" Recovered files do not work either.
View 4 Replies View RelatedI have Photoshop Elements 6.0. I was working on an image with 3 layers and I'd been saving very regularly, then my computer crashed. It didn't crash while I was saving but it must have still been saving when it happened because my file got damaged. Now when I open it, it comes up with a message saying 'This document contains Adobe Photoshop data which appears to be damaged. Continue and ignore the Photoshop data?' when I click ok it then says 'The embedded ICC profile cannot be used because the ICC profile descrition is invalid. Ignoring the profile'. When the image opens its completely flat and black. I've tries a few recovery programmes but that didn't seem to work. I found a temp file but I don't think it'ss a real temp file because it doesn't have an extension.
View 4 Replies View RelatedIs there a way to do a manual backup of the catalog file within LR4 other than having it prompt you when exiting the application?
View 2 Replies View RelatedI recently upgraded to LR 4.1 on a Win 7x64 machine. I noticed that a large number of jpg, psd and maybe some xmp files that are in my catalog had their last modified date set to the current date even though I did not edit them. Is this a possible issue with Lightroom 4.1? (I also upgraded to PS CS6 but did not edit the files in question).
Another note: They tend to be older files (1 or more years old) and from one physical drive (which happens to have the older files) and not another.
Changed to add that jpg file dates were also changed.
What is the best way to back up my data?
I normal export the entire catalog about once every two months (I'm not a heavy user) to an external hard drive and the catalog file (lrcat) too. Pluse I also back up the catalog file (lrcat) about once a week to the internal hard drive.I am not sure if this is the right way to go about backing up.
Just installed lightroom x86 windows 7 onto a new laptop as network admin. Installed from the disk and licenced as net admin. I then go to create a new catalogue and type the name and save to My Docs "local HDD" once i select save the program closes. I get the windows 7 spinning ring but nothing else. If i click lightroom shortcut it won't load as it know's their is still an instance open in the background. I have it working on my machine using the same method.
View 9 Replies View RelatedI've downloaded the file on the download page 9 times, and get the same error each time I try mounting it in OSX 10.6.8. My machine has the right specs. The downloaded file size is always 411.7 mb, but the download page says it should be 392.7 mb.
View 2 Replies View RelatedI use VB.net in VS2010 design some drawings in AutoCad2011, in .NET 3.5.I write a Class Library in VS2010 to draw some blocks in Autocad, and it runs OK.
Then I design a Windows Forms Application in VS2010 for some inputs, and call my program above. However, everytime I got error as below in my Class Library code.File not found exception was unhandled,
Could not load file or assembly 'acdbmgd, Version=18.1.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.