Any way to produce a feathered edge to a movie clip? Similar to what people often do with photographs where the outer say 30pixels fade to transparent. Can't find any way to do it in VS X2 or in virtualdub.
View 7 RepliesThe movie clips in my "project" are not playing the audio. Yes, volume is on and I have ensured that the volume is all the way up and that the "mute" option has not been selected. Screen cap is attached of the video tab.
When I click on the individual "clip" the sound works no problem. The other audio files are also working no problem.
I should mention that the original file was an IFO file from a Sony Handicam that I converted to AVI which I dragged into the program.
why the clips are not playing the audio?
Using VS X5 - Just making up a menu for my dvd im burning. Haven made a menu since using ..VS11+ I think it was.
All seems very very familar...similar etc and not asking it to do anything out of the ordinary which 11+ couldnt cope with ( just nowadays using all this AVCHD malaky etc )
Question -Main menu of my dvd - Why am I getting on my main menu page the begininings of my movie!!! I have my main menu setup ( bringing in a pre-made 30second clip on which I will put 'Press Play to watch movie' and/or 'chapter select'. ) When i preview my main menu page...I see the 30second clip i wanted but as it runs so too does my actual movie - at the same time.
I cant seem to find a button to ..basically..tell it not to play the movie as soon as you load the dvd but instead to wait until the 30 second main menu runs and automatically reruns etc until YOU decide to press the 'Play movie' button.
We thinking about buying Adobe Premiere Pro for production of movies shown as LED banners on sport arenas. We need to make a customised projects and sequenses where 20 small movies are shown on the screen at the same time. Full screen has a solution on 2560 x 1120 px. Each small movie has a solution on 1280 x 112 px. The 20 movies filles up the total screen. Is this posible and an eacy thing to do in Adobe Premiere Pro?
View 2 Replies View RelatedI am using CS4. I would like to make a 2-layered file, where the bottom layer is blank and the top layer is white and has an opening (say, heart-shaped) with feathered edges. I have tried so many ways, and can't make this happen.
View 4 Replies View RelatedI can crop and feather a selection of an image, but what i wanted to do was apply a feathered edge to an entire image so that i could drop it into a word doc and it would look a bit smarter.
I've been trying to do it by -
'Select > All ' then ' Select > feather ' applying the amount of feather (i did an inch just to make sure).
But it made no difference - i tried exporting this as a JPEG to see if it came up then but it still didn't make a difference...
I am trying to make an animated gif for tumblr in PSE 10. I'm very new to this and I don't understand what I am doing wrong. The gif only includes like 15 frams but when I go to Save for web or whatever the animation button is disabled.
Here are some screenshots.
How to produce a soft edge frame around all 4 sides of the photograph where the image gradually fades to white at the outer edge? Example attached.
View 1 Replies View RelatedWhen I select a clip, it then goes to the start of the clip, how can I sop this happening and the clip stays in the same position when selected.
View 5 Replies View RelatedI’ve just produced a short video, intended for Youtube, but in the ‘Share – create video file’ step can find no options to produce an mp4 file in 16:9. My preferences were set to 16:9 right from the start and all the material is either originally 16:9 or cropped to 16:9, so it would be nice to produce the video as 16:9. I tried a few other file type options that I thought might be suitable for uploading but can’t find anything on offer that would produce a small file size in 16:9.
View 9 Replies View RelatedI would like to produce high quality video files from VideoStudio X4. I can produce MP4 files 1280*720 (16:9), 25 FPS, but how do i produce similar quality (and aspect ratio) in FLV format?
View 4 Replies View RelatedIf I have 200 pictures and 5 minutes of video is there a quick and easy way to produce a video quickly with transitions in between all pictures?
Are there templates that all pictures can be inserted into to produce something really quick so that from this starting point editing can begin?
When I produce a MP4 video file in X4 it shows a thumbnail in the video file. I cannot figure out where this image comes from. It seems sometime to be the first video image from all tracks, but sometimes it is just the upper video track and sometimes it is a picture from a later point of the video. How does it work? And how can I control which image is used?
View 3 Replies View RelatedNew Vs pro x4 user here.
I would like to save my movies as WMV files at a size of 640x480 . I found a template in the movie templates manager that has the size , however try as I might I cannot get to save the file at around 500mb's . it keeps saving the file at around 120 mbs how to adjust the save file size
How I can add intro movie before menu. I'm using VS Pro X6.
View 2 Replies View RelatedIn VideoStudio Pro 4, I was able to modify the proportions of my movie : stretched it or squeeze it, in or out of proportion. I can't seem to do this in Video Studio Pro 5. A strategic admittance to promote the next "Hyper Super Ultimate" 6th version 6 ?
View 6 Replies View RelatedAt the EDIT step, the voice level of each HD clip is in reasonable level, but during playback of the entire project the voice level droped down. Also after rendering the voice level is still low. On the other side, the voice level of imported music from audio CD doesn't changed. Is it suppose to be so? I am using the Pro X4 program.
View 8 Replies View RelatedI have a sequence of still jpgs I rendered out of Maya. There are 90 total. I want to throw them into the editor at 30fps and have them be in order. I have tried simply copying them all and dragging them all at once onto the timeline but that leave each image at 3-4 seconds per image and they are not in order.
I know there is other software I could use to do this but since I'll be editing the video in Video Studio I thought it would be nice to be able to do this inside of it. Is this possible with Video Studio?
I made a new template for creating a 30Mb/s "one keyframe/frame" MOV output content which worked well when set via custom settings. When I wanted to use my template in the "create video file" prompt, my VSX3 "needed to stop" ...and I was asked to send the .DMP file to Corel tech support. VS restarted OK, but once I selected "create video file", same story: stop.
Trying to delete form the movie template manager, same story: stop. Changing the settings to lower performance MOV in the temlate manager worked, but still same result when trying"create video file". Couldn't wait for the Corel support. Full reinstall solved the problem.
I'm trying to remove a watermark in an old movie made of my son in high school (about 8 yrs old), by a friend of his. It's right in the middle of the screen in bright red. They didn't care about it back then as it allowed them to format their movie online. Before I put this very short clip in my memorial video I want to clear that out. Don't know what original software was used. My son's friend can't remember either. Does Videostudio have a way to fix this?
View 2 Replies View RelatedWhere is Get more link for Movie Factory 7 SE?
I think that I have to re-install this, as I don't think it is properly installed
How do you burn a movie to a dvd disc? I created my movie, then clicked share tab. DVD factory 2010 opened up and I created my menu. After 3 hours of converting file the burn said failed with no explaination. So I then made a file of the movie. Opened vs3 again and tried to burn the saved file which was an mpg format to disc. The program doesn't recognize mpg files only vsp files. The program made the mpg file. So how do I burn the mpg file to disc?
View 3 Replies View RelatedUsing Video Studio Pro X5, I edited a home video and saved my project into vsp file. When I previewed the video, it looked fine. I clicked Share, Create Disc, chose DVD, click Next, Next, Output, chose Create to Disc, and clicked Burn icon at the bottom right. It rendered for a while and completed.
When I played the DVD, the movie loops (meaning it played to the end of 15-minute video clip and did not stop, it went back to the beginning and played again and again)
I have been happily using this program for a few weeks and have nice movies and view well on PC. Only problem I find is being able to save a Movie to dvd to play on a dvd player. The only way I can do it is to save the movie as a video file and then burn to disc using Windows DVD Maker. As far as I can see I have tried all options on Video Studio, and have had no success at all.
View 5 Replies View RelatedI am using Video Studio V12.0.98.0 (Pro X2)
I can successfully output an .mpg file for a Windows 7 laptop attached to a LG BX324 Projector [URL]
I use Share | Create Video File | HDV | HDV 1080i 50i for HDV option to achieve this.
I would like to output a movie suitable for an Apple Computer, in frame height 1080 x 1440, as this presentation is for a lecture theatre.
Currently, I do not have access to this Apple computer. I am trying to play a movie generated by Video Studio on my Win 7 PC using my Windows QuickTime Player 7.7.1.
May I ask, is this the way I can test if I can successfully generate a movie suitable for an Apple computer using my Win7 PC?
I've been stumbling around with the share options, but all I seem to be generating is movies of a small size e.g 576 x 720.
Which Share settings should I be using for movie of 1080 x 1440?
I edited some video for my daughter's drama class and burned a disk for her. When my daughter presented for the class on her teacher's computer there was text covering the video that seemingly had nothing to do with the video. I can't reproduce it and I don't even know what kind of system the teacher uses, but is there some trick to burning a disk so that it displays the same on anything and everything?
View 1 Replies View RelatedI have a number of panoramic images that I'd like to add to a movie with videostudio but I can't seem to figure out how to pan them properly... the images are long and narrow (as would be expected). is there any way that I can use them with out have a big black boarder top and bottom?
View 3 Replies View RelatedHow do you convert a sequence of images, say PNG files to a movie in VideoStudio Pro X3?
View 7 Replies View RelatedI have tried burning a Blu-ray disk using Movie Fatory 7 without any success. First of all I tried to burn an mpeg file to the disk (File Format not supported message in DVD Movie Factory), then in VS4 I tried "create video file" as a blu-ray format PAL Mpeg2 1920x1080 in VS4 - then went to "Create Disc" opened DVD Movie Factory 7 and selected BluRay, (File Format not supported message in DVD Movie Factory), so then I searched these forums and found that it looked like I should create a AVCHD file format in VS4 PAL HD 1920, so I did that and then went to "Create Disc" and got the same error message that file is not supported.
How do I create a BluRay disc that will play in a bluray machine? I have bought blank BluRay discs, but Movie Factory won't burn my file formats?
It is always a pleasure as well as informative experience. My question is simple I would like to incorporate a Powerpoint presentation to my video project. Is this possible? If so how would I go about uploading the PP files to Video Studio Pro x4? Or even better Is there any way for me to create Power point like video screens with Video Studio Pro x4 editing or templates?
View 2 Replies View RelatedI cannot fade out the sound at the end of my movie.
I have just bought VideoStudio X5 and added the SP1. On my first try, I have added a MP3 file on my silent movie, on the music track.
On this track, I have shortened the music to the end of the movie and with the sound properties panel displayed, I have click the fadeout button which is now on. But when I test my movie or when I generate a video file, the music doesn't fade out and stops suddenly at the end of the movie.