I would like to produce high quality video files from VideoStudio X4. I can produce MP4 files 1280*720 (16:9), 25 FPS, but how do i produce similar quality (and aspect ratio) in FLV format?
View 4 RepliesIf I have 200 pictures and 5 minutes of video is there a quick and easy way to produce a video quickly with transitions in between all pictures?
Are there templates that all pictures can be inserted into to produce something really quick so that from this starting point editing can begin?
When I produce a MP4 video file in X4 it shows a thumbnail in the video file. I cannot figure out where this image comes from. It seems sometime to be the first video image from all tracks, but sometimes it is just the upper video track and sometimes it is a picture from a later point of the video. How does it work? And how can I control which image is used?
View 3 Replies View RelatedThere is a new option on X6 to download an edited video to an SD card. How do I download to a USB Flash Drive? Is it the same option or is there a better way.
View 2 Replies View RelatedI was wondering, after I make a walkthrough in Revit, Is there a way that I can produce the walk-through into a video which I can open separately (like with windows media player rather than through Revit). If so, how?
I wanted to give a little presentation of the building I had created by showing people a walkthrough of the model, however I thought it would look unprofessional if I have to present it within Revit.
I’ve just produced a short video, intended for Youtube, but in the ‘Share – create video file’ step can find no options to produce an mp4 file in 16:9. My preferences were set to 16:9 right from the start and all the material is either originally 16:9 or cropped to 16:9, so it would be nice to produce the video as 16:9. I tried a few other file type options that I thought might be suitable for uploading but can’t find anything on offer that would produce a small file size in 16:9.
View 9 Replies View RelatedHow can I run Flash player on Photoshop video series (CS5 Extended)?
View 1 Replies View RelatedI have prepared an animated video in Photoshop/ImageReaday (CS2). How to I export it to an editable Flash file?
I tried Export > Macromedia® Flash SWF but when I opened the resulting file in Flash (CS3) I found it was not editable. I need to be able to access the timeline and layers.
Any way to produce a feathered edge to a movie clip? Similar to what people often do with photographs where the outer say 30pixels fade to transparent. Can't find any way to do it in VS X2 or in virtualdub.
View 7 Replies View RelatedI was setting up some of my defaults in the newly installed X5 and I went to setup a flv template, and no flash option!?!?
View 5 Replies View RelatedMy X4 project is done in 16:9 and I can render to MPEG-2 in widescreen but not Flash. I want to publish on Blip.TV and YouTube.
View 11 Replies View RelatedI have found that the latest version of Flash makes some of the older flash files from VS9 jerky or causes them to stall altogether.To fix this I simply use the Flash removal tool from Adobe and install version 10.0.45.
Magically all my old Flash files have movement again.Trouble is every couple of days Flash somehow updates itself back to the current 10.1.something and the old files stop working again.Is there a way to stop Flash from updating automatically?
Any easy way of adding a camera flash effect to a VS project rather than refilming it? I am using VSx3
View 3 Replies View RelatedI added a flash animation as an overlay track but cannot get it to extend further than the original animation length, I am trying to have the animation as a background throughout the video.
View 2 Replies View RelatedI want to use VSx4 to create a custom sized .swf, flash file for a website. I plan to use a free program called Any Video Converter to covert my final VSx4 creation to the .swf as I hope that future versions of VS will have .swf output.
I'll be creating the video using stills with transitions in between.
Now I haven't tried this yet but...
I know how to change the project properties to custom frame sizes which is fine but what should I aim to be creating? I was thinking of an MP4 (H264) file but just wondering if you have other thoughts on what I should create as a video file before converting to .swf
The stills will be j-pegs. No audio will be involved
I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
I have a LIVE show recorded and I want to add Video Filters in various places within a single 4 minute video. Do I need to cut up my video to segments to add filters too or can I apply them to different spots in a single video?
View 5 Replies View RelatedIs there any way to push the video in the video track after the title track is completed ....
View 4 Replies View RelatedIs there a way to set 20 fps for my video in corel video studio x3 ?
i made a 3d animation and rendered about 3000 single frames as .bmp . Now i want to put them together to a video. the speed of the animation is preset, so i need every frame to show up for 0.05 second..... 20 fps not 15, not 24, not 25 and not 29.97, but exactly 20 fps. i don't know if i am just very stupid, but i can not find the settings for this.
With the installation of SP1 (VSX4), the options to create a blu-ray video file (assuming 1920x1080 only, though the same options exist for 1440x1080) are now:
Blu-ray (1920 x 1080)
Blu-ray H.264 (1920 x 1080P)
Blu-ray H.264 (1920 x 1080)
Now, I want to create a 'standard' Blu-ray disc of family videos. My camera is a Canon Vixia HF20, recording in 1920x1080 in the '60i' mode. The camera creates AVCHD formatted files. I know I don't want the progressive option, however, what is the difference between the other two options (is it MEG4 vs. AVCHD? If so, what should I choose when creating a new disc?). I want my disc to support as many blu-ray players and HDTV's as possible since I will be giving copies to various family members (meaning I don't want a format that supports only the latest releases of blu-ray players).
Can it actually be done? If I so much as drop 3D file onto the timeline and tag it as 3D (SBS L-R in my case), I get the "... lost 3D attributes..." message when I try to create a 3D file. I tried tagging a 2D file as 3D for S&Gs and got the same result. In case it matters, the files are in .avi format (and even rendering a 2D version of these makes a jumpy video, but I digress...).
View 9 Replies View RelatedIs there anyway to convert the video to 4:3. When I save it 4:3 file it doesn't cut it down. It makes the video look back. Can I cut the outside edges to make the video 4:3?
View 3 Replies View RelatedI just purchased Video Studio Pro X3 and I love it . In my opinion it is possible to capture video from the video camera. I have a JVC HD camera
This the camera I purchased.
[URL]......
I would like to hook my camera up to my computer
[URL]........
How do I do this. Now of course my camera records off an SD card and I can just stick it in there and edit. The reason I am hoping I can capture video just like I can with a webcam is because the view screen on my camera no longer functions so therefore I can only point in my general direction and center up the shot in post edit.
When I record in 720p @ 30 FPS my raw files are usually around 30-35kbit rate, however whenever I compress the videos they seem to drop to around 18k bitrate which really put my videos below the standard I want. I've tried to add my own compression templates but whatever I do, I can't seem to get any of the compression options above 20.000 bitrate.
I have tested with Sony Vegas and with that I can pretty much choose myself what bitrate I want it to be. Although I know Corel a lot better and its easier for me to do what I want with it.
- How can I compress my files with higher bitrate? I want it around 30.000k.
Is it me or am I really seeing that X5 has LESS video encoding options vs X4? Really? I remember having lots of choices and options as far as how to encode MP4 the size (or ratio, etc 720 vs 1080p)
I can't seem to get 1080p but I can get 720p but in X4 I recall I could do 1080p for MP4 though.
I'm new to video editing and am using video studio Pro X3, everytime I edit some video or want to use a clip. The trimmed video always flashes the first frame at the start and finish of the trimmed clip. Also when I add a subtitle or text in the time line, that first frame flashes by at the beginning and end of of the text. This is very annoying and doesn't look very good in the project. How can I remove this first frame and how do I prevent it in the first place??
View 1 Replies View RelatedI have been having a beast of a time trying to find a program that will support the files from my new camera. It records in 1920 by 1080 30fps .MOV. Windows movie maker and my old adobe program will not recognize this video I have recorded. Does corel pro x4 is capable of importing and editing this footage? Would love to know before I purchase. I am not looking to convert the video either, I have tried that and it has really hurt the quality.
View 4 Replies View RelatedI have a video clip in 4:3 format that I want to insert in a video project in 16:9 (project properties set at 16:9). How could I do that?
I know that there will be black bands above and below the converted project. However, when I inserted the 4:3 video clip in the 16:9 project, it stays in 4:3.
Am trying to rotate a MPG video taken with an original aspect ratio of 16:9 in portrait mode ie long side vertical. The video loads into Videostudio fine, ie the image is sideways-on as expected and there are the black bars at top and bottom in the edit window as is usual for 16:9 videos. If I use the rotate button, this does rotate the video, but there are now black bars down the left/right sides as well as top and bottom, and the viewable image looks 4:3 (?) - it is flattened ie people look short and fat. Is there a particular project property/create video setting I need to set. I don't understand the settings - I'ver tried things like 'non-square pixel rendering' without knowing what to expect - but nothing so far seems to work.
View 4 Replies View RelatedWhichever video format I have on the timeline or in the batch converter, I never can find a setting to create interlaced MOV video's with VSX3. Is this correct?
View 5 Replies View RelatedProbably a well worn topic but I've lost all my video filters in VS Pro X2? Just trying to crop some green screen shots that still show the garage wall.
View 2 Replies View Related