On the two movies that I have created DVD's for, I have the same problem on both.
When I play them on my DVD player, they do not go to the Menu (Title Page), instead both just start to play the movie. I can only get to the Menu page by pressing 'Menu' on my remote.
I have finished authoring my first DVD with VSX5. The VIDEO_TS folder and contents have been produced successfully. However the burned folder is a disaster and will not play past the title menu. I have used Nero for the burn.
It is not a media problem because I have used the same media brand on hundreds of project and hardly ever had problems.
I have also tried to play the project from the VIDEO_TS folder via the IFO file. I can get past the title menu to the chapters menu but again highlighting a chapter will not change the thumbnail in the Smart Menu window but the Play button works.
I authored the same movie in Pinnacle Studio 12.1 and had no problems.
I have been happily using this program for a few weeks and have nice movies and view well on PC. Only problem I find is being able to save a Movie to dvd to play on a dvd player. The only way I can do it is to save the movie as a video file and then burn to disc using Windows DVD Maker. As far as I can see I have tried all options on Video Studio, and have had no success at all.
View 5 Replies View RelatedUsing VS X5 - Just making up a menu for my dvd im burning. Haven made a menu since using ..VS11+ I think it was.
All seems very very familar...similar etc and not asking it to do anything out of the ordinary which 11+ couldnt cope with ( just nowadays using all this AVCHD malaky etc )
Question -Main menu of my dvd - Why am I getting on my main menu page the begininings of my movie!!! I have my main menu setup ( bringing in a pre-made 30second clip on which I will put 'Press Play to watch movie' and/or 'chapter select'. ) When i preview my main menu page...I see the 30second clip i wanted but as it runs so too does my actual movie - at the same time.
I cant seem to find a button to ..basically..tell it not to play the movie as soon as you load the dvd but instead to wait until the 30 second main menu runs and automatically reruns etc until YOU decide to press the 'Play movie' button.
How I can add intro movie before menu. I'm using VS Pro X6.
View 2 Replies View RelatedI'm just experimenting putting a project together and I have come across this option under the Project Settings under the Share Tab.
I cannot work out what it does? I have ticked/un-ticked the box but it seems to make no difference. How this works?
I am using Ulead VideoStudio and I am trying to add a title before the video start without any success I always get the title over the first few seconds of the video.
View 1 Replies View RelatedRegarding VSX5 Titles/Menus
In the finalized DVD the menu page appears only for a maximum of 30 seconds before continuing to play the movie. Is it possible to introduce a 'Pause until play is selected' option?
That is to say no automatic playing of the movie until the user decides.
I added a title to my movie but the title is showing up on random clips now.
View 1 Replies View RelatedI am using VideoStudio Pro Ultimate 6 and it offers me certain Menu Packs and Title Packs, but when I try to install I get the message "Installed Version of the application could not be determined. Setup will terminate". All of the single Title packs install without a hitch, but several of the packages will not. At a lost of how to troubleshoot this and wonder have others here experienced anything similar or same. I was thinking because I upgraded from Version 4 ultimate and never got 5 because I got Mercalli and ProDad with the Ultimate upgrade in Version 4, that maybe it is looking for version 5. Other than that supposition, I am at a lost.
View 14 Replies View RelatedWhen creating a menu with VS pro x4 the text alignment option for the menu title is greyed out.
View 10 Replies View RelatedI have reinstalled Windows 7 64 bit to clean up my computer. I was hoping that his issue with the Title Packs Menu packs would also be resolved. The message keeps coming up: "The installed version of application could not be determined. Setup will terminate. System has not been modified".
Corel.jpg (18.52 KiB) Viewed 441 times
I have been using the nine chapter thumbnail DVD menu template. I saw that the start position for each thumbnail could be manually adjusted. So, taking some time, I adjusted each of the nine thumbnails to a suitable frame of the corresponding clip. It worked fine as long as I burned the DVD immediately afterwards. However, if I closed the menu dialogue, all clips reverted to frame 1.
Surely the positions should be saved as are all of the other edits one does to a menu. Not only was this frustrating, it means that one cannot go back and easily burn another DVD from the same project.
Why doesn't the slideshow start button in Library mode play the selected music?
View 1 Replies View RelatedNew Vs pro x4 user here.
I would like to save my movies as WMV files at a size of 640x480 . I found a template in the movie templates manager that has the size , however try as I might I cannot get to save the file at around 500mb's . it keeps saving the file at around 120 mbs how to adjust the save file size
In VideoStudio Pro 4, I was able to modify the proportions of my movie : stretched it or squeeze it, in or out of proportion. I can't seem to do this in Video Studio Pro 5. A strategic admittance to promote the next "Hyper Super Ultimate" 6th version 6 ?
View 6 Replies View RelatedAt the EDIT step, the voice level of each HD clip is in reasonable level, but during playback of the entire project the voice level droped down. Also after rendering the voice level is still low. On the other side, the voice level of imported music from audio CD doesn't changed. Is it suppose to be so? I am using the Pro X4 program.
View 8 Replies View RelatedI have a sequence of still jpgs I rendered out of Maya. There are 90 total. I want to throw them into the editor at 30fps and have them be in order. I have tried simply copying them all and dragging them all at once onto the timeline but that leave each image at 3-4 seconds per image and they are not in order.
I know there is other software I could use to do this but since I'll be editing the video in Video Studio I thought it would be nice to be able to do this inside of it. Is this possible with Video Studio?
I made a new template for creating a 30Mb/s "one keyframe/frame" MOV output content which worked well when set via custom settings. When I wanted to use my template in the "create video file" prompt, my VSX3 "needed to stop" ...and I was asked to send the .DMP file to Corel tech support. VS restarted OK, but once I selected "create video file", same story: stop.
Trying to delete form the movie template manager, same story: stop. Changing the settings to lower performance MOV in the temlate manager worked, but still same result when trying"create video file". Couldn't wait for the Corel support. Full reinstall solved the problem.
I'm trying to remove a watermark in an old movie made of my son in high school (about 8 yrs old), by a friend of his. It's right in the middle of the screen in bright red. They didn't care about it back then as it allowed them to format their movie online. Before I put this very short clip in my memorial video I want to clear that out. Don't know what original software was used. My son's friend can't remember either. Does Videostudio have a way to fix this?
View 2 Replies View RelatedWhere is Get more link for Movie Factory 7 SE?
I think that I have to re-install this, as I don't think it is properly installed
How do you burn a movie to a dvd disc? I created my movie, then clicked share tab. DVD factory 2010 opened up and I created my menu. After 3 hours of converting file the burn said failed with no explaination. So I then made a file of the movie. Opened vs3 again and tried to burn the saved file which was an mpg format to disc. The program doesn't recognize mpg files only vsp files. The program made the mpg file. So how do I burn the mpg file to disc?
View 3 Replies View RelatedUsing Video Studio Pro X5, I edited a home video and saved my project into vsp file. When I previewed the video, it looked fine. I clicked Share, Create Disc, chose DVD, click Next, Next, Output, chose Create to Disc, and clicked Burn icon at the bottom right. It rendered for a while and completed.
When I played the DVD, the movie loops (meaning it played to the end of 15-minute video clip and did not stop, it went back to the beginning and played again and again)
I am using Video Studio V12.0.98.0 (Pro X2)
I can successfully output an .mpg file for a Windows 7 laptop attached to a LG BX324 Projector [URL]
I use Share | Create Video File | HDV | HDV 1080i 50i for HDV option to achieve this.
I would like to output a movie suitable for an Apple Computer, in frame height 1080 x 1440, as this presentation is for a lecture theatre.
Currently, I do not have access to this Apple computer. I am trying to play a movie generated by Video Studio on my Win 7 PC using my Windows QuickTime Player 7.7.1.
May I ask, is this the way I can test if I can successfully generate a movie suitable for an Apple computer using my Win7 PC?
I've been stumbling around with the share options, but all I seem to be generating is movies of a small size e.g 576 x 720.
Which Share settings should I be using for movie of 1080 x 1440?
I edited some video for my daughter's drama class and burned a disk for her. When my daughter presented for the class on her teacher's computer there was text covering the video that seemingly had nothing to do with the video. I can't reproduce it and I don't even know what kind of system the teacher uses, but is there some trick to burning a disk so that it displays the same on anything and everything?
View 1 Replies View RelatedI have a number of panoramic images that I'd like to add to a movie with videostudio but I can't seem to figure out how to pan them properly... the images are long and narrow (as would be expected). is there any way that I can use them with out have a big black boarder top and bottom?
View 3 Replies View RelatedHow do you convert a sequence of images, say PNG files to a movie in VideoStudio Pro X3?
View 7 Replies View RelatedI have tried burning a Blu-ray disk using Movie Fatory 7 without any success. First of all I tried to burn an mpeg file to the disk (File Format not supported message in DVD Movie Factory), then in VS4 I tried "create video file" as a blu-ray format PAL Mpeg2 1920x1080 in VS4 - then went to "Create Disc" opened DVD Movie Factory 7 and selected BluRay, (File Format not supported message in DVD Movie Factory), so then I searched these forums and found that it looked like I should create a AVCHD file format in VS4 PAL HD 1920, so I did that and then went to "Create Disc" and got the same error message that file is not supported.
How do I create a BluRay disc that will play in a bluray machine? I have bought blank BluRay discs, but Movie Factory won't burn my file formats?
It is always a pleasure as well as informative experience. My question is simple I would like to incorporate a Powerpoint presentation to my video project. Is this possible? If so how would I go about uploading the PP files to Video Studio Pro x4? Or even better Is there any way for me to create Power point like video screens with Video Studio Pro x4 editing or templates?
View 2 Replies View RelatedI cannot fade out the sound at the end of my movie.
I have just bought VideoStudio X5 and added the SP1. On my first try, I have added a MP3 file on my silent movie, on the music track.
On this track, I have shortened the music to the end of the movie and with the sound properties panel displayed, I have click the fadeout button which is now on. But when I test my movie or when I generate a video file, the music doesn't fade out and stops suddenly at the end of the movie.
The movie clips in my "project" are not playing the audio. Yes, volume is on and I have ensured that the volume is all the way up and that the "mute" option has not been selected. Screen cap is attached of the video tab.
When I click on the individual "clip" the sound works no problem. The other audio files are also working no problem.
I should mention that the original file was an IFO file from a Sony Handicam that I converted to AVI which I dragged into the program.
why the clips are not playing the audio?
