VideoStudio :: X5 - DVD Will Not Play Past Title Menu
Jun 6, 2012
I have finished authoring my first DVD with VSX5. The VIDEO_TS folder and contents have been produced successfully. However the burned folder is a disaster and will not play past the title menu. I have used Nero for the burn.
It is not a media problem because I have used the same media brand on hundreds of project and hardly ever had problems.
I have also tried to play the project from the VIDEO_TS folder via the IFO file. I can get past the title menu to the chapters menu but again highlighting a chapter will not change the thumbnail in the Smart Menu window but the Play button works.
I authored the same movie in Pinnacle Studio 12.1 and had no problems.
View 10 Replies
ADVERTISEMENT
Jun 14, 2012
On the two movies that I have created DVD's for, I have the same problem on both.
When I play them on my DVD player, they do not go to the Menu (Title Page), instead both just start to play the movie. I can only get to the Menu page by pressing 'Menu' on my remote.
View 3 Replies
View Related
Apr 23, 2011
Video Studio pro X2 (12.0.98.0)
After editing my clips and am ready to burn,I select SHARE, CREATE DISK, DVD, create a menu and get stuck in a closed loop.Instead of NEXT after I preview the final product, the window has BACK, so I end up in the window where you select if you want a menu. Click NEXT and am back at the menu window with BACK in the box.
This same VS pro X2 was on my old computer (XP) and made many burns with no problems.
View 6 Replies
View Related
Apr 20, 2013
I'm just experimenting putting a project together and I have come across this option under the Project Settings under the Share Tab.
I cannot work out what it does? I have ticked/un-ticked the box but it seems to make no difference. How this works?
View 2 Replies
View Related
Jun 12, 2012
Regarding VSX5 Titles/Menus
In the finalized DVD the menu page appears only for a maximum of 30 seconds before continuing to play the movie. Is it possible to introduce a 'Pause until play is selected' option?
That is to say no automatic playing of the movie until the user decides.
View 4 Replies
View Related
May 4, 2013
I am using VideoStudio Pro Ultimate 6 and it offers me certain Menu Packs and Title Packs, but when I try to install I get the message "Installed Version of the application could not be determined. Setup will terminate". All of the single Title packs install without a hitch, but several of the packages will not. At a lost of how to troubleshoot this and wonder have others here experienced anything similar or same. I was thinking because I upgraded from Version 4 ultimate and never got 5 because I got Mercalli and ProDad with the Ultimate upgrade in Version 4, that maybe it is looking for version 5. Other than that supposition, I am at a lost.
View 14 Replies
View Related
Jan 3, 2012
When creating a menu with VS pro x4 the text alignment option for the menu title is greyed out.
View 10 Replies
View Related
Aug 17, 2013
I have reinstalled Windows 7 64 bit to clean up my computer. I was hoping that his issue with the Title Packs Menu packs would also be resolved. The message keeps coming up: "The installed version of application could not be determined. Setup will terminate. System has not been modified".
Corel.jpg (18.52 KiB) Viewed 441 times
View 3 Replies
View Related
Jan 18, 2012
I've had nothing but problems with this latest project, finally got what looks decent and can't get past "preview" in the burn module. There's no "next" button, just "back."
Here's the details.
Operating system: Windows 7 Home Premium
VideoStudio Pro x2 - downloaded the patch
Project Properties:
NTSC
6.73 KB
37:31 minutes long
Still images are jpeg
videos are both MJPEG and Microsoft AVI (camcorder AND still digital)
Edit file format MPEG - should I try AVI?
Microsoft AVI files
24 bits, 704 x 480
frame-based
4:3
MJPEG Compressor - should this be something different?
PCM, 48,000 kHz 16 bit stereo
Image: Keep aspect ratio checked
apply anti-flickering checked
View 4 Replies
View Related
May 27, 2013
Using VS X5 - Just making up a menu for my dvd im burning. Haven made a menu since using ..VS11+ I think it was.
All seems very very familar...similar etc and not asking it to do anything out of the ordinary which 11+ couldnt cope with ( just nowadays using all this AVCHD malaky etc )
Question -Main menu of my dvd - Why am I getting on my main menu page the begininings of my movie!!! I have my main menu setup ( bringing in a pre-made 30second clip on which I will put 'Press Play to watch movie' and/or 'chapter select'. ) When i preview my main menu page...I see the 30second clip i wanted but as it runs so too does my actual movie - at the same time.
I cant seem to find a button to ..basically..tell it not to play the movie as soon as you load the dvd but instead to wait until the 30 second main menu runs and automatically reruns etc until YOU decide to press the 'Play movie' button.
View 6 Replies
View Related
Aug 18, 2012
I have been editing video with Pro x3 for a while and have not had this problem unti just recently. My computer died and had to be reinstalled (windows 7 ult). When I import flv files they play but are blank. I have tried a couple of things but none work.
View 3 Replies
View Related
Apr 9, 2009
I have just upgraded to CS4 and am attempting to get acquainted with the new workspace options. Is there a way to maximize a floating window in Standard Screen Mode without losing the menu and title bars? I figured out how to drag images to CS4 and have them open as floating windows instead of tabs. However, when I maximize one of the images/floating windows, the menu and title bars are left out and are not visible. I would like to set the menu and title bars so that all images appear beneath them whether they or maximized or minimized.
View 2 Replies
View Related
Oct 14, 2013
I just purchased, downloaded and installed PSE 12. I am running Windows 7. Everything seems to be working fine. My question is this: Why are the titles in tlhe menu bar (task bar?) at the top so small? When you actually pull down the menu it is fine but the titles (file, edit, image, filters etc) are extremely small and very hard to see. Also the path selection tool is just a dot (actually two tiny dots) and not the normal cursor arrow.
View 4 Replies
View Related
Nov 17, 2012
I'm making some music videos, and I thought I'd get the best audio quality using .WAV files instead of MP3 files. Trouble is, when I load a .WAV into my audio track, all I get is a bunch of noise and loud hiss. An MP3 file works just fine. If I play the "clip" in the preview window, each file will play just fine, but the problem shows itself when I play the "project" in the preview window. Is this happening because my computer has choked on all the data, and it's too much for it to handle? Am I stuck with using the MP3 files in my projects?
View 9 Replies
View Related
Apr 3, 2012
All of a sudden my Videostudio X4 will not play any clip for longer then a second or two. When you play a clip or the project it plays for 1 or 2 seconds and stops just like you hit the stop or pause button. Click play again and it does the same thing. Makes it really impossible to edit. It had been working great up until last week. I tried uninstalling and reinstalling but still have the same problem. I have excluded my anti virus from scanning the Corel folder.
View 1 Replies
View Related
May 22, 2013
I have found that the program Videostudio x5 does not play MPG formats.
When using SHARE-Custom-MPG the program renders the video, then displays a general error message and closes the program.
It seems to play AVI, MOV, MP4, WMV, Webm, UIS formats.
Other players work - ie. VLC , Media Player Classic and DIV-X. A black screen is shown in WIN DVD silver.
I have loaded H-Lite 9.90 , FFDSHOW and Windows 8 codecs, but this made no difference.
I have downloaded and installed Videostudio X6 as a trial, but this made no difference either
This is the event log
Event Viewer General
Faulting application name: vstudio.exe, version: 15.0.0.0, time stamp: 0x5149e750
Faulting module name: uvHTMPEG2.dll, version: 0.0.0.0, time stamp: 0x514a04a0
Exception 0xc0000005
[Code]...
View 7 Replies
View Related
Feb 24, 2014
What heading do you look for in the customize menu to change the colour of the main title bar? I can't seem to find it.
View 5 Replies
View Related
Oct 21, 2013
I have an SD Pioneer dvd player...model dv-49av. It plays all commercial DVD fine, but never a DVD I burn from VS. However, any DVD I burn from Corel plays perfectly in my Pioneer 23fd bluray player.
Anything I can do to change this? The disk type (-r, +r etc.) doesn't matter and the DVD that won't play plays fine on the computer. The disk loads fine, but when I select play the video or chapter it just locks up and I have to restart the player.
View 14 Replies
View Related
May 17, 2011
Having produced my first video production on VS4 I made several copies on DVD but I have been unable to get any of those DVD copies to play properly on most DVD players. They all behave differently on on Different players, on some players they won't even start, some will start and play part of the way through before playing up. All copies behave differently on different players. I have been able to get most copies to play properly on my computer.
View 1 Replies
View Related
Aug 25, 2012
...adding effects in VS x5 pro. I just downloaded the trial after upgrading to a new laptop running windows 7 and was told I could not use my videostudio 11 or moviefactory 6 plus. So I have video that I imported from my SDHC card in high def, it played fine until I started adding a crossfade and a couple of slow motions. Now, every video had no sound. I have tried deleting them and bring them back in, but still no sound. It will play music over the tracks, but I have lost all my original sound. I thought I would be able to add some music and lower the original soundtrack at certain points, letting it fade in and fade out, allowing for the original audio to play through and along with the music. I am pretty dissapointed right now and need some answers. Also what happened to the moving menus? I am confused with the templates as well... begininng, middle end or complete. Is that instead of moving menus? Can I not make a moving thumbnail menu with music and chapters?
View 10 Replies
View Related
Dec 6, 2011
I have been creating a project for some time which contains a lot of video clips.Every now and then I position the 'scrubber' mid way along and click on the 'play' button to check what the effect is at the place I am editing.
Today after adding some more video clips to the end of the project and editing them when I place the 'scrubber' where the clips are that I have been editing and click on 'play' to see the effect instead of VS 'paying' my video from the position the scrubber was placed at it moves the scrubber to the start of the project and plays from the beginning. It was not doing that yesterday (I have added some more clips to the end of the project since then and editing them).This is VERY annoying as I cannot check to see what parts of the movie (project) look like without playing from the start of the project (30 minutes in length).
View 4 Replies
View Related
Jan 14, 2012
I download avi files and then edit them in Videostudio X4. THe avi's are always from different resolutions and framerate.
When i play the converted or edited avi files on my mediaplayer on a Widescreen tv then the video is played may time not full screen. Sometimes it is on top and sides filled with black borders.
I would like the video's always be full screen on tv (off course with good quality).
My question is: how can i see in Videostudio if the video can be played full screen on tv?
Let's say i have 2 video's: divx / xvid 576 x 320 at 25.000 fpsec and 512 x 384 at 188.900 at 25.000 frames per second. Would these files be played full screen on the tv?. How can i calculate that it is 4:3 or 16:9 and what must the preference be in Video studio itself: 16:9 or 4:3?
View 1 Replies
View Related
May 25, 2012
I'm trying to create a blu-ray movie that contains AVCHD videos of various vacations that I've been on over the past year (just your typical collection of home movies), but I've had problem after problem in trying to create the damn thing. I've used VS Pro X4 to create four individual movies (representing four different vacations, each saved as vsp files); I then created my "menu file" to compile all four movies into a single blu-ray with each one having menu buttons that then go to chapter sections. Then, due to VSX4 never completing a successful burn, I simply had it create the Blu-Ray folders and then used ImgBurn to burn them to disc.
ANYWAYS, what kind of project settings do I need to be using in VS? I will be playing the disc in a PS3 (not sure if that matters as opposed to a regular BD player). I finally managed to produce a successful burn, but it was only able to play once in my PS3 - for some reason after it initially played fine, it wouldn't play again even though there was no damage to the disc. The disc was a BD-RE DL by Maxell. I had previously tried BD-DL Verbatim discs, but I was never able to finish a burn with those.
I'm just trying to figure out why I'm having so much trouble getting my movie from my computer to a playable disc!! Dx
Here are my current project settings:NTSC drop frame (29.97 fps)MPEG files24 bits, 720 x 480, 29.97 fpsUpper Field First(DVD-NTSC), 16:9Video data rate: Variable (Max. 8000 kbps) LPCM Audio, 48000 Hz, StereoAnd here is a screenshot of my Share > Create Blu-ray properties: click.
Blu-ray burner that I'm using: Matshita BD-MLT U240AF. It is connected via USB cable to my Vista 64 laptop. All of my drivers are up to date.
View 14 Replies
View Related
Mar 12, 2011
Is there a way to change VS X4's setting to play after creating an MPEG file. After I edit a file, I create an MPEG, either DVD or Blu-Ray, and I have to go into options everytime to turn off the play after creating default.
View 9 Replies
View Related
Feb 22, 2011
When I run my project with sound on, those clips shot with a HDV camcorder do not play the sync-sound recorded on them properly. I know that the sound recorded with the clops is perfectly alright as it plays properly when each clip is run individually. when they are run as a part of the whole in the project mode all I get is an unintelligible beating sound. I also have clips in the project that were shot with a DV camcorder and the sync-sound with them plays perfectly alright in any mode. I am unable to find any mention of sync-sound in Corel's user guide and am at a loss of what to do to make the sync-sound play correctly. I haven't attempted to lay my sound-track for the project yet.
View 2 Replies
View Related
Jan 14, 2013
By the way, i use it for a whole week, and it worked just fine, until today i have this problem.
View 1 Replies
View Related
Dec 1, 2013
I have made six slideshows and saved them as mpg files. I have not made any chapters. I now want to do a DVD menu. What I would like to try is a first menu screen with two options "Play All" and "Scene Selection". Play-all will play all and then return to this first menu page. Scene-selection will go to a second menu page. Any scene selected will play and then return to this second screen which will have a link back to the first menu. I'm really at a loss to see how to do this using the menu creation in VS. Is it possible?
View 10 Replies
View Related
Apr 20, 2012
Doesn't matter how I render my .mp4 I can't get it to play on my website in flowplayer. I get audio but no video. Also when I try to open in Zune it gives me an error code and tells me the file is corrupt. I can open it in WMP. It uploaded to youtube and played fine. But I don't want to embed from YouTube I want to upload to my site. I've tried other players and same thing...no luck. So what I finally did is opened up my Camtasia and rerendered from there. Now it works fine every where I play it. Sooo, my question is why won't the rendered mp4 play in all mp4 players?
View 5 Replies
View Related
Jun 27, 2011
Video Studio X4
Is there anyway to play a clip backward? Tried looking special effects did not see it. Have footage of a person running into a pool, I'm trying do a one two one two effect before they go in.
View 1 Replies
View Related
Oct 29, 2012
On my Video Studio Pro 5 I have an annoying delay every time I press Play to preview.
I am sure that pressing this button is the most common thing people do and yet it's the slowest one. It takes 2-3 sec each time.
I have pretty fast new computer i5 overclocked to 4Gh and 8GB Ram and working with short (max 10min) 720p clips.
View 5 Replies
View Related
Sep 20, 2011
I have been happily using this program for a few weeks and have nice movies and view well on PC. Only problem I find is being able to save a Movie to dvd to play on a dvd player. The only way I can do it is to save the movie as a video file and then burn to disc using Windows DVD Maker. As far as I can see I have tried all options on Video Studio, and have had no success at all.
View 5 Replies
View Related
