I'm just experimenting putting a project together and I have come across this option under the Project Settings under the Share Tab.
I cannot work out what it does? I have ticked/un-ticked the box but it seems to make no difference. How this works?
I have finished authoring my first DVD with VSX5. The VIDEO_TS folder and contents have been produced successfully. However the burned folder is a disaster and will not play past the title menu. I have used Nero for the burn.
It is not a media problem because I have used the same media brand on hundreds of project and hardly ever had problems.
I have also tried to play the project from the VIDEO_TS folder via the IFO file. I can get past the title menu to the chapters menu but again highlighting a chapter will not change the thumbnail in the Smart Menu window but the Play button works.
I authored the same movie in Pinnacle Studio 12.1 and had no problems.
On the two movies that I have created DVD's for, I have the same problem on both.
When I play them on my DVD player, they do not go to the Menu (Title Page), instead both just start to play the movie. I can only get to the Menu page by pressing 'Menu' on my remote.
Regarding VSX5 Titles/Menus
In the finalized DVD the menu page appears only for a maximum of 30 seconds before continuing to play the movie. Is it possible to introduce a 'Pause until play is selected' option?
That is to say no automatic playing of the movie until the user decides.
when using the dv to DVD wizard to create my movie i cannot figure why, when the wizard compiles and burns my movie(regardless what menu template i choose) ,the DVD menu always has the date the movie was created in bold letters imprinted on the left side of the screen.how can i disable this?
View 10 Replies View Relatedcan simple fade into slow motion or fade out of the effect ?
View 5 Replies View RelatedI'm using the Flash - Gallery 1 that came with Photoshop CS2. Is there a (hopefully easy) way to get the gallery to automatically play the slideshow when a user visits the page (instead of clicking the play button)?
View 3 Replies View RelatedIs there a way to toggle the auto fade (i.e. turn of fade so it stays visible) of of the pinned toolbar when in the 'select other' command ? There is an option to toggle this under the constraint pinned toolbar but I can't see it for select other.
View 2 Replies View RelatedUsing VS X5 - Just making up a menu for my dvd im burning. Haven made a menu since using ..VS11+ I think it was.
All seems very very familar...similar etc and not asking it to do anything out of the ordinary which 11+ couldnt cope with ( just nowadays using all this AVCHD malaky etc )
Question -Main menu of my dvd - Why am I getting on my main menu page the begininings of my movie!!! I have my main menu setup ( bringing in a pre-made 30second clip on which I will put 'Press Play to watch movie' and/or 'chapter select'. ) When i preview my main menu page...I see the 30second clip i wanted but as it runs so too does my actual movie - at the same time.
I cant seem to find a button to ..basically..tell it not to play the movie as soon as you load the dvd but instead to wait until the 30 second main menu runs and automatically reruns etc until YOU decide to press the 'Play movie' button.
I have been editing video with Pro x3 for a while and have not had this problem unti just recently. My computer died and had to be reinstalled (windows 7 ult). When I import flv files they play but are blank. I have tried a couple of things but none work.
View 3 Replies View RelatedOn windows is there anyway to Auto-Hide menus?
Like this: [URL]....
Unfortunetly its only for ubuntu from what I can tell: [URL]....
I'm making some music videos, and I thought I'd get the best audio quality using .WAV files instead of MP3 files. Trouble is, when I load a .WAV into my audio track, all I get is a bunch of noise and loud hiss. An MP3 file works just fine. If I play the "clip" in the preview window, each file will play just fine, but the problem shows itself when I play the "project" in the preview window. Is this happening because my computer has choked on all the data, and it's too much for it to handle? Am I stuck with using the MP3 files in my projects?
View 9 Replies View RelatedAll of a sudden my Videostudio X4 will not play any clip for longer then a second or two. When you play a clip or the project it plays for 1 or 2 seconds and stops just like you hit the stop or pause button. Click play again and it does the same thing. Makes it really impossible to edit. It had been working great up until last week. I tried uninstalling and reinstalling but still have the same problem. I have excluded my anti virus from scanning the Corel folder.
View 1 Replies View RelatedI have found that the program Videostudio x5 does not play MPG formats.
When using SHARE-Custom-MPG the program renders the video, then displays a general error message and closes the program.
It seems to play AVI, MOV, MP4, WMV, Webm, UIS formats.
Other players work - ie. VLC , Media Player Classic and DIV-X. A black screen is shown in WIN DVD silver.
I have loaded H-Lite 9.90 , FFDSHOW and Windows 8 codecs, but this made no difference.
I have downloaded and installed Videostudio X6 as a trial, but this made no difference either
This is the event log
Event Viewer General
Faulting application name: vstudio.exe, version: 15.0.0.0, time stamp: 0x5149e750
Faulting module name: uvHTMPEG2.dll, version: 0.0.0.0, time stamp: 0x514a04a0
Exception 0xc0000005
[Code]...
I have an SD Pioneer dvd player...model dv-49av. It plays all commercial DVD fine, but never a DVD I burn from VS. However, any DVD I burn from Corel plays perfectly in my Pioneer 23fd bluray player.
Anything I can do to change this? The disk type (-r, +r etc.) doesn't matter and the DVD that won't play plays fine on the computer. The disk loads fine, but when I select play the video or chapter it just locks up and I have to restart the player.
Having produced my first video production on VS4 I made several copies on DVD but I have been unable to get any of those DVD copies to play properly on most DVD players. They all behave differently on on Different players, on some players they won't even start, some will start and play part of the way through before playing up. All copies behave differently on different players. I have been able to get most copies to play properly on my computer.
View 1 Replies View Related...adding effects in VS x5 pro. I just downloaded the trial after upgrading to a new laptop running windows 7 and was told I could not use my videostudio 11 or moviefactory 6 plus. So I have video that I imported from my SDHC card in high def, it played fine until I started adding a crossfade and a couple of slow motions. Now, every video had no sound. I have tried deleting them and bring them back in, but still no sound. It will play music over the tracks, but I have lost all my original sound. I thought I would be able to add some music and lower the original soundtrack at certain points, letting it fade in and fade out, allowing for the original audio to play through and along with the music. I am pretty dissapointed right now and need some answers. Also what happened to the moving menus? I am confused with the templates as well... begininng, middle end or complete. Is that instead of moving menus? Can I not make a moving thumbnail menu with music and chapters?
View 10 Replies View RelatedI have been creating a project for some time which contains a lot of video clips.Every now and then I position the 'scrubber' mid way along and click on the 'play' button to check what the effect is at the place I am editing.
Today after adding some more video clips to the end of the project and editing them when I place the 'scrubber' where the clips are that I have been editing and click on 'play' to see the effect instead of VS 'paying' my video from the position the scrubber was placed at it moves the scrubber to the start of the project and plays from the beginning. It was not doing that yesterday (I have added some more clips to the end of the project since then and editing them).This is VERY annoying as I cannot check to see what parts of the movie (project) look like without playing from the start of the project (30 minutes in length).
I download avi files and then edit them in Videostudio X4. THe avi's are always from different resolutions and framerate.
When i play the converted or edited avi files on my mediaplayer on a Widescreen tv then the video is played may time not full screen. Sometimes it is on top and sides filled with black borders.
I would like the video's always be full screen on tv (off course with good quality).
My question is: how can i see in Videostudio if the video can be played full screen on tv?
Let's say i have 2 video's: divx / xvid 576 x 320 at 25.000 fpsec and 512 x 384 at 188.900 at 25.000 frames per second. Would these files be played full screen on the tv?. How can i calculate that it is 4:3 or 16:9 and what must the preference be in Video studio itself: 16:9 or 4:3?
I'm trying to create a blu-ray movie that contains AVCHD videos of various vacations that I've been on over the past year (just your typical collection of home movies), but I've had problem after problem in trying to create the damn thing. I've used VS Pro X4 to create four individual movies (representing four different vacations, each saved as vsp files); I then created my "menu file" to compile all four movies into a single blu-ray with each one having menu buttons that then go to chapter sections. Then, due to VSX4 never completing a successful burn, I simply had it create the Blu-Ray folders and then used ImgBurn to burn them to disc.
ANYWAYS, what kind of project settings do I need to be using in VS? I will be playing the disc in a PS3 (not sure if that matters as opposed to a regular BD player). I finally managed to produce a successful burn, but it was only able to play once in my PS3 - for some reason after it initially played fine, it wouldn't play again even though there was no damage to the disc. The disc was a BD-RE DL by Maxell. I had previously tried BD-DL Verbatim discs, but I was never able to finish a burn with those.
I'm just trying to figure out why I'm having so much trouble getting my movie from my computer to a playable disc!! Dx
Here are my current project settings:NTSC drop frame (29.97 fps)MPEG files24 bits, 720 x 480, 29.97 fpsUpper Field First(DVD-NTSC), 16:9Video data rate: Variable (Max. 8000 kbps) LPCM Audio, 48000 Hz, StereoAnd here is a screenshot of my Share > Create Blu-ray properties: click.
Blu-ray burner that I'm using: Matshita BD-MLT U240AF. It is connected via USB cable to my Vista 64 laptop. All of my drivers are up to date.
Is there a way to change VS X4's setting to play after creating an MPEG file. After I edit a file, I create an MPEG, either DVD or Blu-Ray, and I have to go into options everytime to turn off the play after creating default.
View 9 Replies View RelatedWhen I run my project with sound on, those clips shot with a HDV camcorder do not play the sync-sound recorded on them properly. I know that the sound recorded with the clops is perfectly alright as it plays properly when each clip is run individually. when they are run as a part of the whole in the project mode all I get is an unintelligible beating sound. I also have clips in the project that were shot with a DV camcorder and the sync-sound with them plays perfectly alright in any mode. I am unable to find any mention of sync-sound in Corel's user guide and am at a loss of what to do to make the sync-sound play correctly. I haven't attempted to lay my sound-track for the project yet.
View 2 Replies View RelatedBy the way, i use it for a whole week, and it worked just fine, until today i have this problem.
View 1 Replies View RelatedI have made six slideshows and saved them as mpg files. I have not made any chapters. I now want to do a DVD menu. What I would like to try is a first menu screen with two options "Play All" and "Scene Selection". Play-all will play all and then return to this first menu page. Scene-selection will go to a second menu page. Any scene selected will play and then return to this second screen which will have a link back to the first menu. I'm really at a loss to see how to do this using the menu creation in VS. Is it possible?
View 10 Replies View RelatedDoesn't matter how I render my .mp4 I can't get it to play on my website in flowplayer. I get audio but no video. Also when I try to open in Zune it gives me an error code and tells me the file is corrupt. I can open it in WMP. It uploaded to youtube and played fine. But I don't want to embed from YouTube I want to upload to my site. I've tried other players and same thing...no luck. So what I finally did is opened up my Camtasia and rerendered from there. Now it works fine every where I play it. Sooo, my question is why won't the rendered mp4 play in all mp4 players?
View 5 Replies View RelatedVideo Studio X4
Is there anyway to play a clip backward? Tried looking special effects did not see it. Have footage of a person running into a pool, I'm trying do a one two one two effect before they go in.
On my Video Studio Pro 5 I have an annoying delay every time I press Play to preview.
I am sure that pressing this button is the most common thing people do and yet it's the slowest one. It takes 2-3 sec each time.
I have pretty fast new computer i5 overclocked to 4Gh and 8GB Ram and working with short (max 10min) 720p clips.
When using the audio fade in and out to activate the fade should the bars be highlighted or dimmed? I don't seem to hear any difference between them. (Vid pro x4)
View 2 Replies View RelatedI have a nicely edited series of videos fading into each other in the video track, and would like to have a series of photographs fade in and out in the overlay track. Fade to Black or dissolve dont achieve the affect I want where we can see the underlying video between photos.
View 5 Replies View RelatedWhen using fade to black in the options panel there is an option to select color. So I could use fade to white etc i spose. This option is grayed out though. how I can activate this?
View 2 Replies View RelatedI see all kinds of effects / transitions for fade to/through black, but not white. (I'm sure there's some quick way to select a color or something, but I can't find it.)
View 5 Replies View Related
