when using the dv to DVD wizard to create my movie i cannot figure why, when the wizard compiles and burns my movie(regardless what menu template i choose) ,the DVD menu always has the date the movie was created in bold letters imprinted on the left side of the screen.how can i disable this?
View 10 RepliesI am working with VS4 since another video program I have has crashed and for some reason they cannot fix it. I'm stuck, with a number of videos to complete, and looking for an alternate program.
1)I've imported a .gif graphic into the time line. The other program allowed me to extend the duration of the .gifs to virtually any length by clicking on it, and dragging the right or left side to the duration desired. I want the them (I am adding a number of stills to the videos) to run 3-5 seconds depending on where it will be placed in the production. When I click the .gif in the timeline, it shows a duration of .01 second. How do I extend that?
2) When previewing a video in the preview window, there is a date and time stamp appearing in black on the video. Am I correct in assuming that this is the "watermark" created by the trial version, and this will disappear when I buy the program?
Has it become a possible option to automatically grab the Date-of-shoot (instead of the DAYToday) when renaming files (that should show shooting- date) in LR5?
View 4 Replies View RelatedI'm just experimenting putting a project together and I have come across this option under the Project Settings under the Share Tab.
I cannot work out what it does? I have ticked/un-ticked the box but it seems to make no difference. How this works?
When I save an updated pre-existing file in X6, the date stamp is not updated. Is there a fix for this bug?
View 14 Replies View Relatedhow to place a time and date stamp on all my pictures?
View 5 Replies View RelatedI think on this stamp there is a date printed by the post office but it is not entirely visible. Is there a chance to detect it working, e.g., with levels or something else? I tried but I did not succeeded. Is there a general method to do it?
Attached File(s) StampXDate.jpg (101.57K)
Number of downloads: 19
Currently in autocad we start the print/plot command and then the command line shows options for the drawing stamp. There are several options including for approval, approved for construction, test only and others. When the appropriate number associated with the correct drawing stamp it lets you pick an insertion point and inserts the drawing stamp with a current date under the stamp to show when the drawing was plotted. After the drawing stamp is inserted it returns to the print/plot dialog.
If any IV users have a similar drawing stamp with date that is put on their drawings, I would like to hear how it was accomplished.
I have played with a sketched symbol and with ilogic can insert the symbol and start the print/plot command but I do not know how to make the stamp selection in ilogic automatic with a parameter or iproperty.
If ilogic is the way to go with this or any other options to accomplish the drawing stamp insertions with current date.
How do I add a date stamp to photos
View 1 Replies View RelatedCan I use Photoshop Elements 9 to remove the date stamp from photos? If so how? If not what other software is available to do this?
View 3 Replies View RelatedUpon uploading the pictures into the Lightroom 'library' none of them appeared to have the date stamp that they did in camera. After a few minutes, the date stamp for each started to appear. Seeing that they first loaded without the date stamp leads me to believe that I should be able to remove it easily. How can I do this without the hassle of cloning/cropping/editing. Is there a way to remove it from the metadata perhaps?
View 7 Replies View RelatedI have done one job with new camcorder and the time and date stamp is on the video. I have looked all through the manual and I cannot find out how to turn off the time and date stamp. Do I turn off at camcorder or with Premiere Pro? I don't want it on my videos.
View 10 Replies View RelatedSettings on the User Preferences Tab (Options Dialog Box) control whether fields are updated automatically or on demand (FIELDEVAL system variable). The Date field cannot be updated automatically regardless of the setting of FIELDEVAL.
View 9 Replies View RelatedIs it possible to add a 'variable' or label to our title block so that when we send a file to the printer, it will pickup the current time and date?
I know how to edit a label but I want this to happen automatically.
I am trying to figure out how to remove the date/time stamp from my photos.
View 1 Replies View RelatedHow i can change the Date and Timestamp on my Photo ?
View 1 Replies View RelatedI do not have ANY page options checked in the print module and yet it continues to print a date/time stamp in the margins of my photo. I want to display this photo in a clip frame so there is no mat and I chose 8.5x11 so I wouldn't have to do any cutting. I don't mind the white border.
How can I get rid of this extremely annoying feature?
I created a date and time stamp to put on a border in paper space. The stamps were created using Mtext with a field. The stamps do not update and show the created time and date. How to create a stamp that updates?
View 8 Replies View Relatedhow to add the plot stamp time/date and file location when printing in autodesk inventor the same as in Autodesk.
View 2 Replies View RelatedUsing VS X5 - Just making up a menu for my dvd im burning. Haven made a menu since using ..VS11+ I think it was.
All seems very very familar...similar etc and not asking it to do anything out of the ordinary which 11+ couldnt cope with ( just nowadays using all this AVCHD malaky etc )
Question -Main menu of my dvd - Why am I getting on my main menu page the begininings of my movie!!! I have my main menu setup ( bringing in a pre-made 30second clip on which I will put 'Press Play to watch movie' and/or 'chapter select'. ) When i preview my main menu page...I see the 30second clip i wanted but as it runs so too does my actual movie - at the same time.
I cant seem to find a button to ..basically..tell it not to play the movie as soon as you load the dvd but instead to wait until the 30 second main menu runs and automatically reruns etc until YOU decide to press the 'Play movie' button.
On windows is there anyway to Auto-Hide menus?
Like this: [URL]....
Unfortunetly its only for ubuntu from what I can tell: [URL]....
I have ONE large 1hr AVI file captured from a DV camcorder. I have used Corel Videostudio to "split by scene", and that works fine, all clips are cpatured. BUT the shooting date for the clips are shown as the same date and time for all clips.
Where can I see the actual shooting date for each clip? I tried to use the old Win Movice maker on a WinXP machine, and here it works fine.
In corel VS I also tried to take one clip in the middle of the file and used the shared function to create an DV AVI file. This file I imported to VideoStudio - and now the date and time for this single clip is right. Unfortunately if I a convert all clips into one single file again I still have the problem.
I know that VS can capture DV and split-by-scene and add the date to the timeline. What I was wondering though, is there any easy way to render all of the split scenes with the date information as separate files?
View 2 Replies View RelatedI wish to import a mixture of Images and videos taken in date sequence by my camera. img and avi.
They import into the library but sort automatically by name or by type (effectivly the same) But when I select sort by date (to get them into the sequence in which they were taken) nothing happens.How to do this? Or does the function not work?
The video I will produce needs to be in date/time order. Is it just that the "time" is not used in the sort and everything taken in one day will not be sorted in chronological order?
All of a sudden I notice that when I open a file in Autocad Architecture, it shows the file creation date and not the actual last save date. Only thing I can think of is I reinstalled 3dsmax Design and I wonder if that changed something. I attached a screenshot for reference.
Building Suite Premium
Win 7, ultimate
i7 1.86ghz, 4meg ram
ATI 5730
I have included both a text and a date as part of the photo caption on each of my photos. When I have attempted to search for a specific date or year, however, nothing comes up. For example, if I search for my photo on "Fido 1985", I can find Fido, but if I simply enter "1985", I get nothing.
View 2 Replies View RelatedI've got some 500 photos in a folder which were imported on two different dates. I've created a new album on the right hand side under "Organize" and just the photos I want are in there. When I look at the folder on the right, all the pictures are there. But I can't call up just that folder; instead what I get on my screen is all 2500 photos in all my photo albums! Not what I want! What I want to get is all the photos in the order in which they were taken on the actual day as all 500 photos were taken at the same day. And I want to be able to view just the 500 photos in that folder by the time those pictures were taken. But, when I imported the second batch of photos it showed the date the file was created rather than the date the photo was taken so, basically, I've got one batch of photos showing the date they were taken (which I downloaded via a link a few days later), and one showing the date they were copied!
View 3 Replies View RelatedHow do I import photos to elements and have it use the photo date, not the import date?
View 3 Replies View RelatedI recently set up Elements 12. Prior to this I used elements 11. In that catalog I have more photos that I don't want. So I decided to export the ones I want then import into PSE 12. As I do this many of the dates on the pictures change from the date taken to the current date. I have tried several different ways and can't stop the dates changing. I am putting them into mobile albums in PSE 12 if that makes a difference.
View 2 Replies View RelatedJust upgraded from X4 to X5, and it seems something is wrong. When I click the Auto Music icon, all options are greyed out.
Okay, it's been over six months since I last used VSX4, but I don't remember having to do anything special to use Auto Music.
Computer is: Dell XPS 8300
Intel Core i7-2600 CPU @ 3.40GHz
DDR3 SDRAM 8 GB
Motherboard - Dell Inc. 0Y2MRG
Graphics - AMD Radeon HD 6450
OS - Windows 8 Pro
I have uninstalled/reinstalled several times, and have installed VSX5 SP1.
long slide show to change via pref. to have the transitions auto added.But it has not worked?
View 4 Replies View Related