I just upgraded to Windows 8. All with Videostudio X5 is working fine, except MP3 files will not play in the Library. I get this strange hiss. If I drop the mp 3 file into the time line on any audio track and then play the project it plays fine. Wave files play fine. I did a uninstall and re-install of X5 to see If that would fix the problem.
View 3 Replies X4. I created a 48hz sample rate 24 bit WAV file on my portable Tascam recorder.. I am creating a sales presentation for my invention. I have brought in many different videos I created on my camera and have edited them successfully with single clip and multi clip. Also have been able to split audio out of video. adjust sections using the nodes with the sound mixer.. move audio after split to different areas on the timeline.. However I need to do some voice over work. I figured it would be much easier and better quality for me to use my tascam to create the wav's and then just drop them into the project, edit them and place them where I want them, mute the voice I have on the video..
I was able to bring the .wavs in just fine.. and while editing them in clip mode they play just fine, I can shorten them or cut them where I need too. But when I choose to play back the project with the .wav in one one of the additional sound/music tracks I get very nasty static only. None of my recorded voice is audible. click to clip mode on the wav audio and it plays perfect. I tried moving it to the voice over track area and same exact problem.
am I missing a switch function somewhere? I made sure I muted the video clips above the .wav in the timeline. The manual says to use import option to bring in audio files but I do not see an import button anywhere? missing something? seems to me the drag and drop or add to library a wave file should work.. ??
i was work on some project and it's was going well and everything was just fine but then i've saved it and close the program (went to watch tv). after few minutes i've opend the program again but then the sound didnt play with "project" but only when i play the clip alone or in edit sound mode. * when i'm playing the project on "audio" instead of "thumbnail" it's working fine...
i'm using X5
ii've record some of my screen in here: [URL]
I am working on creating a project and it all goes well when I have it in the edit tab. I am able to listen to the audio and watch the video.
When I hit the Share Tab and watch it the audio disappears and I can't hear anything anymore but can still see the picture.
I have split the audio from the video to see if this corrects the problem and it doesn't. I know my microphone is picking up the audio or I wouldn't be able to hear it in the edit tab. I have made several videos before using the program and have never encountered this before.
I have few avi video clips which I believe I imported from camcorder using windows moviemaker. When I play those clips in any media player they play fine.
I have latest Corel Video Studio Pro X3. When I import this videos into timeline and play clips sound plays fine but when I play the project there is no audio. Even if I render it there is no sound.
I am using VS Pro X2 - I have 3 small MP4 files in my project timeline (filmed on my mobile phone) and for some reason although they play fine on the clip, the audio doesn't come out on the Project, or on the finished DVD, which is a real pain...I have 94 minutes of good quality DVD and 45 seconds of silence! If there was no audio at all I could understand it, but the MP4 clips all play fine on the "clip"...it''s just that when I play them under the 'Project', there is no audio.
My original DV files (which are all ok) are MPEG Audio Layer 2 files - 48000Hz, 16 Bit Stereo - bitrate 224kbps
The MP4 clips are MPEG AAC Audio files - 48000Hz, 16 Bit Stereo - bitrate 113kbps
when I try to preview my project, I do not get any video. I can hear the audio though. When I preview individual clips I have both audio and video.
View 7 Replies View RelatedIn VS Pro 4, in edit mode, I get no sound when I play the project but sound is OK when I play the clip. Then if I switch on the sound mixer I get sound when I play the project.
View 14 Replies View RelatedI am having a very difficult time trying to figure out what is wrong with my audio in VSPx4.
When I put a video in the timeline and click on it so it is on the "clip" the video plays fine but the minute I switch it to "project" the audio dissappears. If I render it in any format, the audio doesn't return. Also, if I multi-trimm a video I am no longer able to get audio either.
Lastly, if I split the audio from the video I cannot play the project at all. It just gives me a frozen screen...
I have re-installed VSPx4 and have all the patches updated.
I've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
I have somehow managed to save a rendered project in another projects library.In the share tab I cant find a way of browsing to this rendered (vsp.mpg) file in order to open it and continue in the create disc process.
View 5 Replies View RelatedI've imported a wmw clip into the timeline which plays but doesn't display in the screen.
View 4 Replies View RelatedMy video studio pro x5 plays for 2 seconds and then stops in my timeline. This occurs after I've splt and deleted some audio and/or put in a transition. Here are my computer specs:
Brand: Dell Laptop
Processsor Intel(R) Cor (TM) i7 CPU Q820 #1.73GHz 1.73GHz
Ram: 8GB
System Type: 64 Bit Operating System
Pen and Touch: Pen and Touch is available through 80 touch points
Using Video Studio Pro X5, I edited a home video and saved my project into vsp file. When I previewed the video, it looked fine. I clicked Share, Create Disc, chose DVD, click Next, Next, Output, chose Create to Disc, and clicked Burn icon at the bottom right. It rendered for a while and completed.
When I played the DVD, the movie loops (meaning it played to the end of 15-minute video clip and did not stop, it went back to the beginning and played again and again)
After upgrading from W7 to W8 only VS X5 plays .avi videos with a jitter, other software doesn't (Powerdirector, Windows Media Players etc).
View 4 Replies View RelatedBought full version of VS Pro x4. But, it will not import saved library files (photos,video and audio categorized) from Pro X2. I get window saying, "Files cannot be imported, maybe number of files is not correct or files are invalidated." Is there any way of getting my saved library files from Pro X2 into the new X4 library? Also got 3 FX volumes of New Blue "Video Essentials" in Pro X2. Is there a trick to importing them into X4? What to do?
View 2 Replies View RelatedI'm looking to import an existing project into another, I want to do this because then I can move the files around and edit them individually rather than creating an .avi and importing that video onto the timeline. Is there such a command?
View 2 Replies View RelatedI have been using MediaStudio Pro V8 for a long time now and am considering the purchase of VideoStudio X3 to take advantage of the extra and updated featues of a modern editing suite. My question is this, as I am in the middle of editing video footage in MSP8 will I be able to import MediaStudio Pro project files into VideoStudio X3? Also I will be running Win 7 X64 after Xmas so I would be interested to hear if VideoStudio X3 is compatible with Win 7 x64 operating system or if I will encounter problems.
View 5 Replies View RelatedJust installed my free trial for video studio pro 5 and I'm attempting to creat a time-lapse video using 200 jpeg images taken from my dslr camera.After doing the following;
Click File> Insert Media File to Timeline> Insert Photo for time-lapse/strobe and browsing for my images I get the following message "These files cannot be added to this project.
These files may be of unknown format.The computer does not have enough memory Or the file is copyright protected"
Each images is about 750kb in size and are jpegs.I'm using XP home.
Basically, I want to use part/pieces of several project files already created, i.e. to combine the chosen sections into one new project file. Have looked in the Manual and cannot locate the answer! I am now using Prox5.
View 4 Replies View Relatedcrashes in VSX2 (and all previous versions for that matter). At Corel's suggestion I installed the trial version of X5. In the meantime, I had my X2 working a lot better.
But I thought I'd take a look at X5 and see how it looked, since I'd gone to all the trouble of installing it. In order to try it out, I opened some of my projects and played with them a bit. I didn't mean to save them, but apparently I must have because now I can no longer open them in X2. Windows explorer thinks they are X2 project files, but when I try to open them in X2 nothing comes up. Then I try to open them in X5, and sure enough there they are. Project properties confirms they are now X5 project files. I tried to do a save as, but the only options are X5, X4 and X3. No choice for X2.
This is a problem because I haven't decided if I want to buy X5 or not. If I do, fine, but I don't want to be forced into it just so I can work on my old projects. Is there any way to convert them back to a format that X2 will open?
I want to use Photoshop CS6 ( all updates installed ) for editing my videos captured by the Panasonic GH2 camera. I tried all ways of opening the video0001.mts file known to me ( pressing the + symbol, pressing the little film symbol, open as layers ) , and the video itself is shown and played in PS, but the the sound is switched to off and cannot be switched on.
Is there any special setting required or will I have toinstall a special codec for these files ? As the camera is pretty old, I thought for a full compatibility with CS6.
My camera films in AVCHD 1080, 25fps. I currently use VideoStudeo x6. i have been using it for a while and when i export for youtube videos, i find its only quality video when you change the youtube video to HD. Is there a way to set the video, so its still crisp and clear at 360p/480p, as i find its always distorted at these levels, although the footage is amazing in hd. What are the exact project properties i should set and the file export settings.
I am fully aware of the settings for youtube, however is it because iam filming in AVCHd i cant get that clean crisp look at lower levels on youtube? as the best setting for youtube are mpeg files. for reference please check this video i did: [URL]......
When I'm working on a project, "Corel needs to close" when I play the supplied .mpa (sound effect) files whether it be as a clip or in the project. I've downloaded the X4 update.
View 4 Replies View RelatedI have created 2 Bluray discs with Video Studio X5 using clips from my HS700 Panasonic. The clips are high quality HD 1920x1080 AVCHD and import into VS as .mts files. I have created two discs and menus and burned them successfully and at the same time used the function that enables a file version to be stored. The discs play beautifully with menus working well on my Samsung Bluray player and TV and also in my PC drive E using WIN DVD Pro 11 (trial version).
My problem is when I try to play the VSX5 created file on C drive, with WIN DVD Pro 11, if I select the BDMV file it says "media not supported" and if I select the STREAM file it plays the files in the order that VSX5 created them, therefore playing the file 0000.m2ts first and onward to the last. In this case there were 4 AVCHD 1920x1080 h264 files rendered to video files and onto the disc and PC file with menus, therefore VSX5 created 18 .m2ts files in the stream file, 4 video files numbered 0000,0001,0002, 0003 and 14 menu files 0004, through to 0018, all of these .m2ts.
WinDVD Pro 11 plays the stream file as a Playlist in strict numerical order therefore playing the menu files last and not as a selectable thing.I guess my big questions are.1) Am I doing something incorrectly OR 2) Does WIN DVD Pro 11 ever play a Corel VSX5 created PC file as a menu selectable Bluray file like it does with a disc?I am running Windows 7-64 Professional with two 1TB hard drives, I have tried the files on either hard drive without success in playing as I expect (like a disc).
To go back a bit, I have a library of DVD VS created files and play through the Windows Media Centre, however with the Bluray ones it tells me I need to have a Bluray Player, hence my downloading the trial WINDVD Pro 11. The old DVD files had a TS file which contained the files necessary to play the video with menu, but there does not seem to be an equivalent in the Bluray folder.
I'm using Corel VideoStudio X4. I'm facing problem that there is no any audio for any type of video playing. AVI, MP4.. any type of file I play, no audio plays.. All files are checked & plays correctly in any video player, GOM, VLC player etc...
No problem with video files. there is no audio for sample files provided by corel itself. When I play mp3 like audio files, sound plays perfectly. But some problem with video files only... I edited one file but no audio for that file also when I play edited clip in video player like VLC.
PC Configuration:
Windows 7 Ultimate.
HP DV6 laptop. 1GB graphic card, i5 2nd Gen.
I am a amateur editor and do the basic stuff with the editing like color fixing and cropping/cutting. Since the time, i switched to HD videos the video does not render and playback smoothly in preview mode.
However in other editing programs like Vegas it plays back like butter but i am not into Vegas and i dont like vegas. I use Videostudio only.
the video plays back like in 1FPS or like 2-3FPS i mean the videos one picture is shown then directly after 2-3 seconds. The audio is howver smooth.
I have a Duo Core 2ghz Intel Processer,
When I am editing clips and play them, the first second plays, then the vision freezes. The control bar continues across the program and the sound continues, only the picture freezes. Thus I can't judge where to cut.
This is a new computer:
Windows 8 Pro X64,
Gigabyte EP45 DS3 M'board,
2.85 Intel Quad core with
2GB Hard drive,
8GB RAM,
VidStudio X5.
The video was taken on my Canon XA10 HD camcorder. HD footage internally copied to Standard Play on 32GB SanDisk Extreme card and input to computer via card reader and USB2 (front of computer).
On my old Win7 computer I had some problem with jerkiness in the final product, but it was tolerable.
This however, is not.
I have downloaded X5 Patch 1.
Video is MPEG2,
24 bits, 720 x 576, 25fps, variable frame rate.
PAL system
The movie clips in my "project" are not playing the audio. Yes, volume is on and I have ensured that the volume is all the way up and that the "mute" option has not been selected. Screen cap is attached of the video tab.
When I click on the individual "clip" the sound works no problem. The other audio files are also working no problem.
I should mention that the original file was an IFO file from a Sony Handicam that I converted to AVI which I dragged into the program.
why the clips are not playing the audio?
I have come across - the 1st time - a series of mpg video clips which, assembled into a project file on a 3rd party usb memory stick, irregularly freezes the preview image and sound while playing, usually in the 1st or 2nd clip in the file. Searching for a reason, I have played the file on two machines across both usb2 and usb3 connections, and using different versions of VS, and the freezing of the play occurs in all of them. At different places in successive events. The same thing happens with individual clips in VS, and individual clips in other video player software like media player and VLC.
I've no reason to believe that the software or even the files are causing this. At least, not yet. The only common element seemed to be the memory stick, so I copied the files from the 3rd party item to one I know is usb3, opened the project file and after re-linking, played it. Same thing happened in the 3rd clip. The results to date suggest that the player software (any of them) in doing the background data load from the memory stick at some point is taking too long, and thus the freeze. Which led me to review the file formats and size.
The freezing files are interesting - mpg format, but way bigger than I had expected for the duration involved. For example, one of the freezing ones is 1min18sec duration and 99,791Kb in size. Compared to a 51sec 22,224Kb file taken on a different camcorder. The duration versus size differences are substantial (for only a 27 sec duration difference the size difference is nearly 5 times), and one wonders why? Both of them loaded into VS show as MPEG-1 format on a right click properties display.
As far as I am aware, mpeg-1 is the same as avi format, and mpeg-2 and mpeg-4 are compressed and thus smaller versions of the same file length without loss of quality. Why mpg file should freeze during play in VS X6, X5, media player and VLC, on a desktop and a separate laptop machine?
I had VisualStudio x5 working fine on my Windows 8 Pro machine. I've been using this for a few months without issue. I imported some video from my phone in .MOV format, and had the message that I needed install quicktime to work with this video. I did so, edited video, and posted it.
However when I then imported video from my Canon camcorder, AVCHD format, I received a crash dump in trying to play any of the clips. What's strange is that I was able to look at old sections of clips I'd saved and play them find. Only the newer clips were an issue. I suspected corrupt files, re-imported things and it didn't work. I even recorded new video and that didn't work. I was up to date on patches from Corel, according to the product.
I was in a bind, so I decided to upgrade to x6, even though none of the features were really important. I upgraded, imported the same videos I'd had issue with in x5 and they worked. Problem solved, or so I thought.
I had to run x5 to access some old clips to put together a short reel. I did that and things worked fine. I then went back to x6 and received crash dumps on all imported files, including the video I had just imported. I can still play the edited pieces of clips I separated out in x6, but I cannot play any full clips.
I've rebooted multiple times, removed quicktime, uninstalled and reinstalled x6, no go.