When I'm working on a project, "Corel needs to close" when I play the supplied .mpa (sound effect) files whether it be as a clip or in the project. I've downloaded the X4 update.
View 4 RepliesI have created 2 Bluray discs with Video Studio X5 using clips from my HS700 Panasonic. The clips are high quality HD 1920x1080 AVCHD and import into VS as .mts files. I have created two discs and menus and burned them successfully and at the same time used the function that enables a file version to be stored. The discs play beautifully with menus working well on my Samsung Bluray player and TV and also in my PC drive E using WIN DVD Pro 11 (trial version).
My problem is when I try to play the VSX5 created file on C drive, with WIN DVD Pro 11, if I select the BDMV file it says "media not supported" and if I select the STREAM file it plays the files in the order that VSX5 created them, therefore playing the file 0000.m2ts first and onward to the last. In this case there were 4 AVCHD 1920x1080 h264 files rendered to video files and onto the disc and PC file with menus, therefore VSX5 created 18 .m2ts files in the stream file, 4 video files numbered 0000,0001,0002, 0003 and 14 menu files 0004, through to 0018, all of these .m2ts.
WinDVD Pro 11 plays the stream file as a Playlist in strict numerical order therefore playing the menu files last and not as a selectable thing.I guess my big questions are.1) Am I doing something incorrectly OR 2) Does WIN DVD Pro 11 ever play a Corel VSX5 created PC file as a menu selectable Bluray file like it does with a disc?I am running Windows 7-64 Professional with two 1TB hard drives, I have tried the files on either hard drive without success in playing as I expect (like a disc).
To go back a bit, I have a library of DVD VS created files and play through the Windows Media Centre, however with the Bluray ones it tells me I need to have a Bluray Player, hence my downloading the trial WINDVD Pro 11. The old DVD files had a TS file which contained the files necessary to play the video with menu, but there does not seem to be an equivalent in the Bluray folder.
i was work on some project and it's was going well and everything was just fine but then i've saved it and close the program (went to watch tv). after few minutes i've opend the program again but then the sound didnt play with "project" but only when i play the clip alone or in edit sound mode. * when i'm playing the project on "audio" instead of "thumbnail" it's working fine...
i'm using X5
ii've record some of my screen in here: [URL]
I am working on creating a project and it all goes well when I have it in the edit tab. I am able to listen to the audio and watch the video.
When I hit the Share Tab and watch it the audio disappears and I can't hear anything anymore but can still see the picture.
I have split the audio from the video to see if this corrects the problem and it doesn't. I know my microphone is picking up the audio or I wouldn't be able to hear it in the edit tab. I have made several videos before using the program and have never encountered this before.
I'm using Corel VideoStudio X4. I'm facing problem that there is no any audio for any type of video playing. AVI, MP4.. any type of file I play, no audio plays.. All files are checked & plays correctly in any video player, GOM, VLC player etc...
No problem with video files. there is no audio for sample files provided by corel itself. When I play mp3 like audio files, sound plays perfectly. But some problem with video files only... I edited one file but no audio for that file also when I play edited clip in video player like VLC.
PC Configuration:
Windows 7 Ultimate.
HP DV6 laptop. 1GB graphic card, i5 2nd Gen.
When trying to render a project file on VS Pro X2 using files from my new Immortal Video Eye Gear sunglasses. The files are in the following format:
Resolution HD 1280 x 720P
Recording Speed 30fps
Video Format H.264
Video File .MOV
I have loaded them on the timeline with no problems, but when I try to play back the project or try to produce an mpeg file to upload on YouTube using "Share - Create Video File" VS closes down with an error message. This is the first time I have used HD in VS Pro X2, and so I am not sure what option to select when using the Create Video File option...
Previously I have only ever used SD video files from my Sony Handycam, and this is the first time I have tried to produce a movie from the video sunglasses footage...perhaps I am not selecting the correct output file format (or maybe it is related to the MOV files being 30fps and not the UK standard 25fps?). The data rate for the files is approx. 6550 kbps and the Total Bitrate is 7062 kbps. Audio is mono 512 kbps (32 KHz).
Unfortunately the error message is not useful ...it just says VS had to close - no clues whatsoever.
I am a amateur editor and do the basic stuff with the editing like color fixing and cropping/cutting. Since the time, i switched to HD videos the video does not render and playback smoothly in preview mode.
However in other editing programs like Vegas it plays back like butter but i am not into Vegas and i dont like vegas. I use Videostudio only.
the video plays back like in 1FPS or like 2-3FPS i mean the videos one picture is shown then directly after 2-3 seconds. The audio is howver smooth.
I have a Duo Core 2ghz Intel Processer,
I have few avi video clips which I believe I imported from camcorder using windows moviemaker. When I play those clips in any media player they play fine.
I have latest Corel Video Studio Pro X3. When I import this videos into timeline and play clips sound plays fine but when I play the project there is no audio. Even if I render it there is no sound.
When I am editing clips and play them, the first second plays, then the vision freezes. The control bar continues across the program and the sound continues, only the picture freezes. Thus I can't judge where to cut.
This is a new computer:
Windows 8 Pro X64,
Gigabyte EP45 DS3 M'board,
2.85 Intel Quad core with
2GB Hard drive,
8GB RAM,
VidStudio X5.
The video was taken on my Canon XA10 HD camcorder. HD footage internally copied to Standard Play on 32GB SanDisk Extreme card and input to computer via card reader and USB2 (front of computer).
On my old Win7 computer I had some problem with jerkiness in the final product, but it was tolerable.
This however, is not.
I have downloaded X5 Patch 1.
Video is MPEG2,
24 bits, 720 x 576, 25fps, variable frame rate.
PAL system
The movie clips in my "project" are not playing the audio. Yes, volume is on and I have ensured that the volume is all the way up and that the "mute" option has not been selected. Screen cap is attached of the video tab.
When I click on the individual "clip" the sound works no problem. The other audio files are also working no problem.
I should mention that the original file was an IFO file from a Sony Handicam that I converted to AVI which I dragged into the program.
why the clips are not playing the audio?
I have come across - the 1st time - a series of mpg video clips which, assembled into a project file on a 3rd party usb memory stick, irregularly freezes the preview image and sound while playing, usually in the 1st or 2nd clip in the file. Searching for a reason, I have played the file on two machines across both usb2 and usb3 connections, and using different versions of VS, and the freezing of the play occurs in all of them. At different places in successive events. The same thing happens with individual clips in VS, and individual clips in other video player software like media player and VLC.
I've no reason to believe that the software or even the files are causing this. At least, not yet. The only common element seemed to be the memory stick, so I copied the files from the 3rd party item to one I know is usb3, opened the project file and after re-linking, played it. Same thing happened in the 3rd clip. The results to date suggest that the player software (any of them) in doing the background data load from the memory stick at some point is taking too long, and thus the freeze. Which led me to review the file formats and size.
The freezing files are interesting - mpg format, but way bigger than I had expected for the duration involved. For example, one of the freezing ones is 1min18sec duration and 99,791Kb in size. Compared to a 51sec 22,224Kb file taken on a different camcorder. The duration versus size differences are substantial (for only a 27 sec duration difference the size difference is nearly 5 times), and one wonders why? Both of them loaded into VS show as MPEG-1 format on a right click properties display.
As far as I am aware, mpeg-1 is the same as avi format, and mpeg-2 and mpeg-4 are compressed and thus smaller versions of the same file length without loss of quality. Why mpg file should freeze during play in VS X6, X5, media player and VLC, on a desktop and a separate laptop machine?
I am using VS Pro X2 - I have 3 small MP4 files in my project timeline (filmed on my mobile phone) and for some reason although they play fine on the clip, the audio doesn't come out on the Project, or on the finished DVD, which is a real pain...I have 94 minutes of good quality DVD and 45 seconds of silence! If there was no audio at all I could understand it, but the MP4 clips all play fine on the "clip"...it''s just that when I play them under the 'Project', there is no audio.
My original DV files (which are all ok) are MPEG Audio Layer 2 files - 48000Hz, 16 Bit Stereo - bitrate 224kbps
The MP4 clips are MPEG AAC Audio files - 48000Hz, 16 Bit Stereo - bitrate 113kbps
I had VisualStudio x5 working fine on my Windows 8 Pro machine. I've been using this for a few months without issue. I imported some video from my phone in .MOV format, and had the message that I needed install quicktime to work with this video. I did so, edited video, and posted it.
However when I then imported video from my Canon camcorder, AVCHD format, I received a crash dump in trying to play any of the clips. What's strange is that I was able to look at old sections of clips I'd saved and play them find. Only the newer clips were an issue. I suspected corrupt files, re-imported things and it didn't work. I even recorded new video and that didn't work. I was up to date on patches from Corel, according to the product.
I was in a bind, so I decided to upgrade to x6, even though none of the features were really important. I upgraded, imported the same videos I'd had issue with in x5 and they worked. Problem solved, or so I thought.
I had to run x5 to access some old clips to put together a short reel. I did that and things worked fine. I then went back to x6 and received crash dumps on all imported files, including the video I had just imported. I can still play the edited pieces of clips I separated out in x6, but I cannot play any full clips.
I've rebooted multiple times, removed quicktime, uninstalled and reinstalled x6, no go.
when I try to preview my project, I do not get any video. I can hear the audio though. When I preview individual clips I have both audio and video.
View 7 Replies View RelatedIn VS Pro 4, in edit mode, I get no sound when I play the project but sound is OK when I play the clip. Then if I switch on the sound mixer I get sound when I play the project.
View 14 Replies View RelatedI am having a very difficult time trying to figure out what is wrong with my audio in VSPx4.
When I put a video in the timeline and click on it so it is on the "clip" the video plays fine but the minute I switch it to "project" the audio dissappears. If I render it in any format, the audio doesn't return. Also, if I multi-trimm a video I am no longer able to get audio either.
Lastly, if I split the audio from the video I cannot play the project at all. It just gives me a frozen screen...
I have re-installed VSPx4 and have all the patches updated.
In edit, when I select Clip and play a clip on an overlay track, there's no sound. Yes, I can first click on the sound mixer and then it plays but what a waste of time. Project will play but then I have to isolate the clip. How do I get sound playing under Clip when the segment is in one of the overlay tracks?
View 12 Replies View RelatedI just upgraded to Windows 8. All with Videostudio X5 is working fine, except MP3 files will not play in the Library. I get this strange hiss. If I drop the mp 3 file into the time line on any audio track and then play the project it plays fine. Wave files play fine. I did a uninstall and re-install of X5 to see If that would fix the problem.
View 3 Replies View RelatedI have recently 'downsized' to a sanyo xacti vpc-cg100ex camera to lighten my load on holiday! this produces mpeg-4 video files which I copy straight to a folder on my laptop from the SD card.
I can put these into the vs library and tranfer them onto the timeline and add trnsitions, titles etc. however VS is closing down with increasing frequency.(same files on my old xp machine seem to work ok albeit depressingly slowly!)
I have been searching the forum and wonder if I should be converting the files to some other format before doing any editing....does that involve using the share option straight after loading the files, and if so, how?
the properties of the original file are
Type mp4 video,
1920 * 1080,
59 frames/sec, bitrate 252,
audio sample rate 48kh
the properties given for the file on the timeline are
Format Mpeg-4 file,
Vid Type H.264 Main profile video, Upper Field first,
Attributes 24bits 1920*1080 16.9
Frame rate 29.970 frames per s
Audio type MPEG AAC 48000 hz 16 bit stereo
I have not been doing any video at all for quite some time so am definately somewhat rusty.
I just installed VS X3 and I'm very impressed with the improved AVCHD editing capabilities. Unfortunately, I'm having a problem with the output. When I import a single AVCHD 1920 clip from my Canon HF100 to my VS X3 project, perform a simple trimming operation, and then save back to the same format as the original clip (no re-rendering), the output file is virtually unplayable. It will usually start playing okay, but after 5-10 seconds start stuttering and even stop playing altogether for 10-15 seconds at a time. I've tried several different players. This problem affects ONLY the output from VS X3. The original footage in the same format plays just fine in any player.
I reverted back to VS X2, tried the same operation with the same clip, and the output is just fine. This must not be a widespread problem, because I searched the forum briefly and couldn't find similar reports. I can continue using VS X2 for the time being, but I really wish I could take advantage of the editing improvements in X3.
how I can activate the scroll line when playing my clips in the Storyboard view.
VS pro X2 has this feature, but I'm unable to find it in VS proX3. It's impossible to see which clip is being played let alone be able to edit.
If I save an image I'm working on, GIMP closes on me. It's merely annoying if I save as an xcf. If I forgot to do that first (I try not to, but it happens), I have only that final image, which usually isn't the only one I wanted.
Today I was cropping photos for various closeups. I copied and saved a selection I wanted to a new image and saved as a jpg, then both the old and new image closed. I then opened two photos in separate images. Cropped one, saved it and it was okay. Undid the cropping and cropped another section and saved it and Poof! Gone again along with the other photo that I had not touched, yet.
When I used GIMP in Windows it never did this. I'm now using Ubuntu and it is almost always doing this. I was under the impression that GIMP and Ubuntu worked well together. This is not what I'd call working together well.
What do I need to do to fix this problem? I have checked my settings, reset them, returned them to default, put them back to my preferences, all to no avail. Size of the image seems to make no difference as it happens to small kilo images as well as multi gig images.
Any solution regarding why video is not playing LR 5.2? In the past video worked fine until this update. I have looked thru the threads and see that other people have had a similar problem. One person said she reinstalled numerous times and then suddenly it began working?!?! I have downloaded all updates and it does not work. Yet I have confirmed that i can go to the files directly and open/play them using other programs.
View 2 Replies View RelatedWhen I run CS4, after about 5 minutes ( of non-use), it closes automatically.
It was working fine until last night.
I have Windows XP Home Edition.
I had to download a file from school and then animate the object we were given. I saved the file to my folders and did the animation and saved it again. When I go to render, I get "unexpected error" and the program force closes. The error report says it is "Unhandled Exception". I just did another assignment last week, and it worked fine. I've changed nothing in the program. The only real difference this time is the presence of a light source and a camera, both of which I've used in the past with no problem.
It has been a couple months since I've worked in the program, and I'm hoping it is an easy fix, just something I've forgotten to change.
When playing vlideo from a either a DSLR or my Canon XL-1 hear no audio from Photoshop CC.When I first opened the file had audio, but have hot heard a sound since then. Audio is fine using other software
View 1 Replies View RelatedMy AVI files will play and allow me to capture a frame but MP4 (my new cam) will not open in X5. I did get a warning that I needed to install Quicktime, which I have done and still won't work.......
The MP4 only shows the 1st frame of the video.I thought maybe PSP doesn't support MP4, but then I read this in help file:"Corel PaintShop Pro supports the video formats that are supported by your system."
I have been working on my third sig, my biggest project yet. I would like to include a video. I have resized the video and put it in a set. I would like the movie clip to play forwards and right after that, backwards for a smooth and continuous repeated play. If it makes a difference, my movie clip contains 52 frames and is played at normal speed.
View 1 Replies View RelatedI have some jpeg images processed in Lightroom 4 and Elements 10 on a usb I want to play through a blue ray player. Do I have to do something extra to them so that the blue ray player will recognise and play them.
View 5 Replies View RelatedAfter rendering a few clips in my timeline for playback, my video tracks are no longer playing back. The timeline time marker plays, the time counts, and the audio playback is working correctly, but the video stays on the frame in which playback started, and does not move change until pausing playback.
View 2 Replies View RelatedI notice red cursor jumping back and forth as I play to edit in open project - did not do this before.What can I do?
i recently dragged the Premiere pro cc icon to my apps folder - could this have introduced a time /rendering delay?I think the sound has also become lower!