I have been working on my third sig, my biggest project yet. I would like to include a video. I have resized the video and put it in a set. I would like the movie clip to play forwards and right after that, backwards for a smooth and continuous repeated play. If it makes a difference, my movie clip contains 52 frames and is played at normal speed.
View 1 RepliesTime was, I used to open the GIMP and the Layers dialogue would just be there for me. Now I always have to open it again, every time I start the program. Tell me what's changed?
View 1 Replies View RelatedSo whenever I try to type, the blinking indicator that tells you where you are is all the way on the left not the right. And I already have reset the tool but it did it again.
View 5 Replies View RelatedHow can I take out what's inside of the crop box.
As opposed to whats outside of it.
I have PS CS2, client has PS CS3. Do I need to ask him to Save As or
Export in some special way so that I can open his PSD file?
I'll upgrade if that's my only choice, but I don't use Photoshop a lot,
and I was hoping to get another few years out of it.
I added Keywords to many jpg files when I should have added them to their scanned source files (tifs). Is there an efficient way to copy them from the jpg versions to their tif “originals?” Except for the suffixes, they are identically named. I know the keywords assigned to any one jpg can be dragged to its tif version (or to any any other image file).
But I have about nine thousand of them, each with its own set of keywords, and each with its own tif source file (with no keywords). Is there a way to automate this transfer en mass? Is there a way to tell the jpgs to transfer their keyword metadata to other files with the same names (minus prefix) or to any other files?
I’m using Bridge3 OSX but will use any software that can do this.
Usually when I type in CS6, it will just be like typing normal. Except all of a sudden when I type. The sentance starts to move backwards and when I put something like a ? or a ! the symbols will go to the beggining of the sentance.
View 9 Replies View RelatedConsider a photo with the buildings are falling over backwards for the obvious reason. In Photoshop CS2 one could select Crop, click the “Perspective” box, then drag the top corners independent form one another to align them with some vertical lines in the photo. If there is no vertical line near the edge, one could temporarily drag the side of the crop tool to a vertical line before using the top corner to slant the vertical side of the crop tool to follow a vertical line in the photo. Then drag the two vertical sides of the crop tool back so that their bottom corners coincide with the bottom of the photo, double click, and your building has vertical sides. How can I do this in Elements 12?
View 2 Replies View RelatedHow do I reverse an image-it is printed backwards
View 4 Replies View RelatedI have a time series if 245 images that I want to run in a slideshow. Problem is I want to run them in reverse order to that shown in the library. Any thoughts on how this can be done?
View 2 Replies View RelatedAnytime i have to go backwards it is such a hassle. In this case i need to convert it to 2010 with no aec objects.
I have etransmit to 2010 exploded aec, but the wipeouts become 3d faces. I feel i spend way more time then it should take. Are there any third party softwares?
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
I want to animate my clock hands backwards but i have tried to use the select and rotate button from the use selection center(centre)then turning on the autokey but it's not working the handles don't stay aligned.
View 1 Replies View RelatedIs there a way to use the crystallize tool backwards? What I mean is pulling into the shape instead of pushing out.
View 1 Replies View RelatedAre After Effects CC projects backwards compatible with AE CS6?
View 3 Replies View RelatedI use the Selection/Move tool a lot in Illustrator, but this never happened in CS3 or CS4: If I select a mark or a shape to move a specific amount, click on the Selection arrow to specify the distance, using a minus sign if I want the object to move down-screen, when I click on OK, the object moves up-screen. Is this the new, improved, Illustrator? I mean, all right, I can get used to changes in conventions, but isn't this sort of an unlikely change? Aren't there other improvements to be made in the app? Is it me, or is it Illustrator?
View 19 Replies View RelatedWhy is Illustrator CC typing hebrew text backwards? It clearly stats that it does suports Hebrew!
View 3 Replies View RelatedIs there any way to track select backwards, a la FCP7, in Premiere? I've tried all the modifiers but no luck. I'm guessing 'no but feel free to fill out a feature request'..
View 3 Replies View RelatedCivil 3d 2012 SP2 - When using "Align Space" from the layout Panel of the Express Tools ribbon, I am not able to align the viewport correctly. It seems to be working backwards. I am trying to orient a viewport to something other than a cardinal direction, but for the sake of clarity, I will use an example using cardinal directions. If I am trying to orient the viewport so that North is at the right side of the page, when prompted for the model space alignment I select a line that goes from south to north in model space. When prompted for the paper space alignment, I select a line that goes from left to right. I would expect that north would end up on the right side, but it is on the left side. When experimenting a little, it seems like it is using the model space alignment as the paper space alignment and the paper space alignment for the model space alignment.
View 9 Replies View RelatedI have been using Lightroom 4 with a subscription on my personal computer. I am now taking a class at a college where they have Lightroom 2 on the computer lab's computers. Can I use/convert a lightroom 4 catelog or .dng picture from 4 to 2 without losing my editing work?
View 2 Replies View RelatedIs there any reason to keep 2008 if you have a new copy of 2011? Any old features lost or old files types that can't be opened in 2011 that worked in 2008?
What's the best ways to make sure files edited and saved in 2011 can also be opened and fully edited by users of 2008?
Save as older version? Export as IFC? Something else?
How to lose timeline backwards with increased speed?
View 1 Replies View RelatedI have been trying to convert my offices blocks to dynamic blocks and this one is giving me a hassle.
Essentially we have a line with an arrow at the end of it to show drainage pathways. I added a multiline attribute so we can add the percentage along the line with a mask. The line, arrow and attribute all need to be able to be aligned perpendicular or tangent to a given line. Everything looks great until the arrow flips sides to work from the other direction and then the text is mirrored backwards.
Mirrtext is set to 0 and I even tried it while in the Beditor to see if there was independent. Multiline or Regular attribute have the same effect as well as if they are locked position or not.
I tried adding a flip, but then the mirrortext settings work just fine and the text won't flip back.
When playing vlideo from a either a DSLR or my Canon XL-1 hear no audio from Photoshop CC.When I first opened the file had audio, but have hot heard a sound since then. Audio is fine using other software
View 1 Replies View RelatedI have some jpeg images processed in Lightroom 4 and Elements 10 on a usb I want to play through a blue ray player. Do I have to do something extra to them so that the blue ray player will recognise and play them.
View 5 Replies View RelatedI am working with CS6. Recently I have been recording a few actions that I like to run on a lot of my photos. Before I am done recording these actions I like to group them. Here is where the problem comes into play however...First time I play the action it shows up perfectly in the layer panel. The 2nd,3rd attempt an so on, the action that is grouped (the same action or another grouped action) will show up all jumbled in the layers panel. Sometimes the adjustment layers show up outside of the group while others the group appears to have "eaten" the first group of actions I ran. why can't I stack the actions I have written?
View 3 Replies View RelatedI've been working on a new website and came up with something pretty clean/simple which I really like (so far anyways). I was just getting it ready to show to the client, and I ran into some trouble. Every time I go to export it (I've tried restarting it a few times to see if it helped, didn't...this is save for web btw) I get these waves of color where there shouldn't be any. Check out this link to see what i mean. I'm curious if anybody knows why this is happening, because I've tried playing with all my export settings and I haven't gotten very far. I've tried flattening all my background layers which are involved with the color, still nothing.
View 5 Replies View RelatedI have Premier Elements and Photoshop Elements. The videos in Pemier Elements play ok and when I click on them Windows Media Player plays them ok, but the Organizer in Photoshop says I don't have the right decompression software to display them.
View 4 Replies View RelatedI just upgraded from PSE 6 to PSE 11 but I can't use email for sharing either as attachments or photo mail. It all worked great in PSE 6 before I decided to upgrade this week. My OS is Vista. I checked the registry and my default is correctly set to Windows Mail, however Windows Mail is not an option in the PSE 11 Preferences Sharing set up. The only options that currently show up are only Outlook or Adobe Email Service. I tried the Adobe Email Service since Windows mail didn't appear in the drop down. I got the confirmation code but PSE 11 still freezes up and is not able to complete the email process.
View 2 Replies View Relatedno sound when playing back clip
View 3 Replies View RelatedI am having a weird issue whenever I make a selection with the pen tool and right click and make it a selection. The selections (dancing ants) go around the outside of it. I know to hit Shift+Ctrl+I and it inverses it normal.
View 2 Replies View RelatedI came across this one tutorial that I'm liking, but in many parts he doesn't explain enough. He just kind of says "Click this, press that. Toward the beginning of the video when he is playing with the rust picture to get just the rust to show, break that down for me so that I can understand the actual princibles behind that so I can apply it elsewhere.[URL]...
View 4 Replies View Related