I have PS CS2, client has PS CS3. Do I need to ask him to Save As or
Export in some special way so that I can open his PSD file?
I'll upgrade if that's my only choice, but I don't use Photoshop a lot,
and I was hoping to get another few years out of it.
Is there any reason to keep 2008 if you have a new copy of 2011? Any old features lost or old files types that can't be opened in 2011 that worked in 2008?
What's the best ways to make sure files edited and saved in 2011 can also be opened and fully edited by users of 2008?
Save as older version? Export as IFC? Something else?
So whenever I try to type, the blinking indicator that tells you where you are is all the way on the left not the right. And I already have reset the tool but it did it again.
View 5 Replies View RelatedHow can I take out what's inside of the crop box.
As opposed to whats outside of it.
I added Keywords to many jpg files when I should have added them to their scanned source files (tifs). Is there an efficient way to copy them from the jpg versions to their tif “originals?” Except for the suffixes, they are identically named. I know the keywords assigned to any one jpg can be dragged to its tif version (or to any any other image file).
But I have about nine thousand of them, each with its own set of keywords, and each with its own tif source file (with no keywords). Is there a way to automate this transfer en mass? Is there a way to tell the jpgs to transfer their keyword metadata to other files with the same names (minus prefix) or to any other files?
I’m using Bridge3 OSX but will use any software that can do this.
I have been working on my third sig, my biggest project yet. I would like to include a video. I have resized the video and put it in a set. I would like the movie clip to play forwards and right after that, backwards for a smooth and continuous repeated play. If it makes a difference, my movie clip contains 52 frames and is played at normal speed.
View 1 Replies View RelatedUsually when I type in CS6, it will just be like typing normal. Except all of a sudden when I type. The sentance starts to move backwards and when I put something like a ? or a ! the symbols will go to the beggining of the sentance.
View 9 Replies View RelatedConsider a photo with the buildings are falling over backwards for the obvious reason. In Photoshop CS2 one could select Crop, click the “Perspective” box, then drag the top corners independent form one another to align them with some vertical lines in the photo. If there is no vertical line near the edge, one could temporarily drag the side of the crop tool to a vertical line before using the top corner to slant the vertical side of the crop tool to follow a vertical line in the photo. Then drag the two vertical sides of the crop tool back so that their bottom corners coincide with the bottom of the photo, double click, and your building has vertical sides. How can I do this in Elements 12?
View 2 Replies View RelatedHow do I reverse an image-it is printed backwards
View 4 Replies View RelatedI have a time series if 245 images that I want to run in a slideshow. Problem is I want to run them in reverse order to that shown in the library. Any thoughts on how this can be done?
View 2 Replies View RelatedAnytime i have to go backwards it is such a hassle. In this case i need to convert it to 2010 with no aec objects.
I have etransmit to 2010 exploded aec, but the wipeouts become 3d faces. I feel i spend way more time then it should take. Are there any third party softwares?
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
I want to animate my clock hands backwards but i have tried to use the select and rotate button from the use selection center(centre)then turning on the autokey but it's not working the handles don't stay aligned.
View 1 Replies View RelatedIs there a way to use the crystallize tool backwards? What I mean is pulling into the shape instead of pushing out.
View 1 Replies View RelatedAre After Effects CC projects backwards compatible with AE CS6?
View 3 Replies View RelatedI use the Selection/Move tool a lot in Illustrator, but this never happened in CS3 or CS4: If I select a mark or a shape to move a specific amount, click on the Selection arrow to specify the distance, using a minus sign if I want the object to move down-screen, when I click on OK, the object moves up-screen. Is this the new, improved, Illustrator? I mean, all right, I can get used to changes in conventions, but isn't this sort of an unlikely change? Aren't there other improvements to be made in the app? Is it me, or is it Illustrator?
View 19 Replies View RelatedWhy is Illustrator CC typing hebrew text backwards? It clearly stats that it does suports Hebrew!
View 3 Replies View RelatedIs there any way to track select backwards, a la FCP7, in Premiere? I've tried all the modifiers but no luck. I'm guessing 'no but feel free to fill out a feature request'..
View 3 Replies View RelatedCivil 3d 2012 SP2 - When using "Align Space" from the layout Panel of the Express Tools ribbon, I am not able to align the viewport correctly. It seems to be working backwards. I am trying to orient a viewport to something other than a cardinal direction, but for the sake of clarity, I will use an example using cardinal directions. If I am trying to orient the viewport so that North is at the right side of the page, when prompted for the model space alignment I select a line that goes from south to north in model space. When prompted for the paper space alignment, I select a line that goes from left to right. I would expect that north would end up on the right side, but it is on the left side. When experimenting a little, it seems like it is using the model space alignment as the paper space alignment and the paper space alignment for the model space alignment.
View 9 Replies View RelatedI have been using Lightroom 4 with a subscription on my personal computer. I am now taking a class at a college where they have Lightroom 2 on the computer lab's computers. Can I use/convert a lightroom 4 catelog or .dng picture from 4 to 2 without losing my editing work?
View 2 Replies View RelatedHow to lose timeline backwards with increased speed?
View 1 Replies View RelatedI have been trying to convert my offices blocks to dynamic blocks and this one is giving me a hassle.
Essentially we have a line with an arrow at the end of it to show drainage pathways. I added a multiline attribute so we can add the percentage along the line with a mask. The line, arrow and attribute all need to be able to be aligned perpendicular or tangent to a given line. Everything looks great until the arrow flips sides to work from the other direction and then the text is mirrored backwards.
Mirrtext is set to 0 and I even tried it while in the Beditor to see if there was independent. Multiline or Regular attribute have the same effect as well as if they are locked position or not.
I tried adding a flip, but then the mirrortext settings work just fine and the text won't flip back.
I am starting a Digital Media class in college and CS5 is what is setup on computers and textbooks are also about CS5 as well. They haven't upgraded to CS6 yet. I am mainly doing Photoshop, Flash Professional, and Illustrator in this class. The first program we are using is Photoshop. I have just paid for and downloaded the Creative Cloud and everything pertains to CS6.
I stick with using Photoshop CS5? Or can Photoshop CS6 be used as long as I don't use the newer parts of the program?Also will there be compatible issues in say for instance I am doing a project and going back and forth from my computer at home (with CS6) to working on it at school (with CS5)?
compatibility from CS2 to 7 and I can't seem to figure out what's wrong. I have a file with many layers made in CS2 but when I open it in 7, they're all merged - all I see is the background layer. Now before you ask, I know about the file handling settings and I made sure I have enabled "maximize psd and psb file compatibility" and version cue workgroup.
View 1 Replies View RelatedI'm in a multi office environment with a network, I'm the only staff person with CS6 and all our CS5.x users have been getting errors opening CS6 files despite me having file compatibility set to "Always":
"The document contains unknown data which will be discarded to keep layers editable."Warnings about missing "color books" even though I don't use PANTONE"Could not complete your request because the file is not compatible with this version of Photoshop"..I just chatted with Adobe and after a long session here were their non-answers:
"There is a lot of features in CS6 that will not work on CS5 and we will not be able opening the CS 6 image in CS5." "You can disable the Third Party Plug-ins" (I'm not using any) So let's start our own list of KNOWN ISSUES with Photoshop version compatibilty
CS6 vector strokes. Any file I send with the new vector strokes can not be opened by CS5.x usersIt seems if I flatten all shape layers and smart objects, however our PSDS have hundreds of layers and even with the new search feature this is tedious. Plus you get into having two versions of a final file floating around which is a liability.
I do not understand the technical side of computers - I just use them for my work as a photographer
I have Photoshop CS5 32 bit installed on my PC with Vista home premium. I am buying a new PC with 64 bit Windows 7 installed, and it also has the option to upgrade for free to Windows 8 pro. Will my CS5 work on windows 7 and if I take the free upgrade will it work on Windows 8 pro?
Does it matter that CS5 is 32 bit and the new PC will be 64 bit? I don't want to get the free upgrade if it means my CS5 won't work on it, as I am happy wioth CS5 and do not need to upgrade to CS6 yet.
I've previously used CS4 and CS5 to make layered psd templates. They have always been compatible with elements and all versions of Photoshop. Now I've used PS CC and it is either just not opening or freezing up other versions of Photoshop.
View 5 Replies View RelatedJust bought a new camera (Canon T3i). Took a scan disk full of pics in "Camera Raw". Tried to open in Photoshop and got message that "Camera Raw" from my camera is not compatible with Photoshop CS5.
View 2 Replies View RelatedI'm running CS5.1 on a Windows 7, 64 bit machine. I've been using plug-in's from Neat Image and OnOne for a long time with no issues. Now I've installed Topaz Adjust plug-in and I'm having a problem. Randomly, when I launch Photoshop and look in Filters I will find EITHER my old plug-in's or the new Topaz plug-in. But never all three at the same time. And it is always random as to which will load at launch.
View 2 Replies View RelatedUnfortunately I only own Photoshop Elements - although my college uses the latest Cs2 (MAC).
I have worked at home (Windows XP) on my Elements (it does the job well). Now, what I was wondering is if there was any way of being able to open my Elements file with the CS2 version? Or have I wasted my time?
I have no idea ......... It is important that the tutor is able to view the original file, so that they can see the layers etc.
I have tried sending the file via email, but there is no chance of attatching this file. But if I am certain that the file will open in college, then I could burn the file to disc?
Before buying a computer with Vista 64 bit I would like to know if my copy of photoshop CS2 will run
View 2 Replies View RelatedI own an older version of Photoshop.. 7.0 to be exact. it is not compatible with Vista on my new computer. Which versions are? starting with 8.0
View 2 Replies View Related