Is there any reason to keep 2008 if you have a new copy of 2011? Any old features lost or old files types that can't be opened in 2011 that worked in 2008?
What's the best ways to make sure files edited and saved in 2011 can also be opened and fully edited by users of 2008?
Save as older version? Export as IFC? Something else?
I have PS CS2, client has PS CS3. Do I need to ask him to Save As or
Export in some special way so that I can open his PSD file?
I'll upgrade if that's my only choice, but I don't use Photoshop a lot,
and I was hoping to get another few years out of it.
I updated my computer to windows 7 32 bit and need the file: AdskHwCertificationDatabase.xml - version 17.1.0.4 so that I can find out the correct driver for my OS and my quadrofx 1700 graphics card. Autodesk doesn't support 2008 Architecture and the on;y file I can find is buried in a torrent file with a pirated copy of 2008 and I DO NOT wish to download that.
View 3 Replies View RelatedAre there any compatibility issues with Autoturn 6.0 (by transsoft) and civil 3D 2011. Our Traffic Engineering Division uses the Autoturn program for turning templates, etc.
Windows XP SP3
C3D 2011- 32 bit
We currently use a Gestetner 3227 B/W printer as a system printer and have experienced consistent print problems while plotting CAD drawings. We now have the opportunity to try to avoid print problems with a new printer.
We currently have Autodesk Inventor 2011 software (but only use the Mechanical Desktop feature for 2D & 3D), a Widows XP operating system and print to 8-1/2 x 11 and 11x17 papers only.
1) Does Autodesk have a list of recommended or compatible "Printers" that I can be directed to?
2) Is there a specific question, feature or requirement that the office manager should ask about the printer to assure compatibility?
So far, when asked if the printers are Autocad compatible, the vendors claim that their printers "should be compatible" or that they need further details about the autodesk product without being able to specify the type of details they require.
We're teaming up with an Architectual firm on a project. They use Revit 2013, we use Civil 3d 2011. They will have to save back for us. Will we be able to incorporate their dwg's into our dwg's and vice versa. If so, will the 2 be compatible with any issues?
View 2 Replies View RelatedI've been looking through old threads on here that all seem to date back to 2008 for this same problem I'm having, but the way to fix them only seems to work for Windows XP and I'm currently on Windows 7.
Problem:
I'll have a session of ACA 2008 running and if I double click on another dwg file it starts up another session of ACA instead of opening within the current session I'm already running. My SDI setting = 0. I tried switching it to 1 and that didn't work. Put it back to 0 and still didn't change anything.
One of the older threads on here [URL] .... says to go in to windows explorer/ tools / folder options, but that set up is different now in Windows 7 than it was in XP so I can't get to Files Tab and change anything for dwg.
I recently found a command on the internet that enables only solids in a .dwg to be exported to a seperate autocad .dwg, muggins here didnt take a note of the command and I have searched google ten times over to find it again but to no avail.
View 1 Replies View RelatedI have drawings that were made in AutoCAD Architecture 2008 that when opened in AutoCAD Architecture 2012, the 0-width walls in the drawing don't show up anymore. The only solution I found was to change the Base Height in the properties of the wall (which I accessed by choosing the zdiagnostics display setting) to 10' instead of the standard 1/2" that we normally use.
I'm guessing it has to do with the wall styles as they were transferred from out 2008 to our 2012 template.
I've got a .PDF of a survey attached (not overlayed) to my site plan construct...on a printable layer. In my sheet it shows up. When I print preview it's there. When it comes out of the plotter it's not there. If I print the PDF by itself through Acrobat it prints fine. Is there a bug here?
View 2 Replies View RelatedI can't plot PDF on AA 2011.
View 3 Replies View RelatedI’m having a problem with ACA 2011 and tags (prop sets).
They are not updating When add any type of tag to an object. It’s coming up as –
I have download the sp2 and it seems to fix the problem, but then it comes back again. Some PC are working and other are not.
The only workaround I have got is to remove ACA from the regedit and run CAD again or run the update msi.
Several users here in my office have been having a strange issue with ACA 2011. When doing various things such as, saving, regen'ing, or manually switching between open drawings, ACA will "blink" to a completely different drawing.
For example, right now I have 4 drawings open. I'm trying to go from drawing A to drawing B. It goes to drawing B and starts to regen model space, then it blinks back to drawing A. Does the same for any of the 4 drawings. Only way to make it stop was to close drawing A.
As I said, it not only does this when switching drawings. It'll also do it after it's done saving and when I try to regen.
Is it possible in ACA2011 to explode a block, but control what layer the pieces go to?
I have a block for a closet rod and shelf , but it always has to be re-sized once in the drawing so i must explode it. since it was made on layer 0 it explodes to that layer and I have to change the items to the proper layer.
After I plot to pdf, I get an error message: You do not have a PDF viewing application installed. Go to the internet and dowload a pdf viewer. The problem is that Acrobat Reader X is installed on my computer. I saw the thread about Reader X having spooling issues, so I reinstalled Acrobat Reader 9. Still get the same message.I can go to the file afterwards and open it, despite this message, but it is supposed to open from Architecture after it is plotted and it won't do that.
View 4 Replies View RelatedI am having issues with drawings from a consultant. They are sending us DGN files and they do not seem to want to import in the latest AutoCAD Architecture 2013 I have deployed throughout the offce. However, these same drawings have no problem in importing to AutoCAD Architecture 2011. In 2013, I get no activity once I select the file to import. If I click on the screen once, the program dims and the program says it is not responding. But I have no problem with 2011.
View 9 Replies View RelatedWhen I give keyboard commands to open, save or save as the program freezes. Pulldown menu to open and save work fine but pulldown save as freezes and freezes when using commands on "A". Happening in 2009 also. Same thing happened yesterday, repair did not fix it, so uninstalled and reinstalled and all was fine. Now today freezing again.
Had a blue screen message yesterday when I turned on the computer, bad spooler something. Are these problems related or just a coincidence? Using Windows XP. Autocad is up to date as is Windows.
how to export creations from AutoCAD Architecture 2011 to CINEMA 4D R11.5 ?
View 4 Replies View RelatedAfter upgrading to ACA 2011 in plan view I am unable to snap to the edges of walls. Toggling the osnap setting check box to allow object snap to act on wall justification lines seems to have no effect as it always snaps only to the justification line and to nothing else. This is extremely annoying and makes it impossible to dimension to the face of a wall that is center justified. Is this a bug or am I missing some new setting somewhere? All my layers are unfrozen including layer 0.
View 9 Replies View RelatedI'm having an issue where AutoCad Architecture 2011 is crashing on some but not all machines (4 total) when a file is closed.
We are also getting what appears to be random slow downs on files when opening and a jumpy mouse that makes drawing impossible. I have not been able to establish a pattern to point at specific files to being the problem as it happens across several the are fine one day, not fine the next and fine again a day later. All stations are identical.
Win 7 Pro - 64 bit
Intel Xeon cpu 3.60Ghz (2 processors)
9 BG RAM
NVIDIA GeForce GT 240
I got a problem with my autocad architecture 2011.
View 2 Replies View RelatedI get a window popping up that says "Cannot open database C:ProgramDataAutodeskACA 2011enuDetailsDetails (US)AecDtlComponents (US).mdb." I have reinstalled ACA 2011, I have copy this same file from another computer, verified the permissions etc... I can click ok and keep working but it randomly will pop up 3-4 or 5 times in a row and I cannot link it to any one event (Can’t cause it to re occur) Also, I cant access the details component manager.
View 9 Replies View RelatedI have a sluggish jerky cursor (and it’s not the operator) when you are NOT in a command and while you are creating your selection set in the command. The cursor jumps and reappears @ ~1 sec intervals so you have to anticipate your mouse move to do anything. OH...and it's only happens in model space.
I tried several settings I found on the internet but nothing works. It's only doing it in 3 drawings right now. The latest one was working fine until ~10:00 this morning, then it started in...no issues before this.
It really makes AutoCAD 2011 basically unusable as it takes 5X longer to complete each command!
AutoCAD Arch 2011
Win 7 64 bit
2.93 Ghz i7
8gb RAM
NVIDIA GeForce GTX 465
I have ACA 2011 on 64 bit Windows 7. I can't seem to find the block authoring palette anywhere..
View 2 Replies View RelatedI would like to preface this post by stating, for the purposes of this message, that I have absolutely no understanding of the workings of AutoCAD. I have looked at many forum discussions concerning my issue and I am simply unable to understand the terminology and/or concepts being described.
I recently purchased a new computer for my office. Accordingly, I needed to install AutoCAD on this new machine. All of the machines in my office are running AutoCAD 2011. However, after addressing some licensing issues with AutoDesk, I received a license and installer for AutoCAD 2012. Everything was installed correctly (as far as I understand) and the program itself is working fine. The problem I am running into involves the text style for the files I open:
For files saved on AutoCAD 2011, the text style used is Arial. Simple; no custom fonts. However, when I open that same file in AutoCAD 2012, the text style for the entire file has changed to Franklin Gothic Book. (Note that all files are accessible from all computers in the office through a network drive)
That is my only understanding of the situation. As I mentioned earlier I have very little understanding of the workings of AutoCAD. I have had this problem for almost a week now and I am no closer to understand this issue, much less solving it.
Multiline text appears dark with a true type font. I have searched the boards and changed the Z coordinate to "0" manually, as well as the flatten command....still no luck. The text was generated from the QLEADER command, but the problem also applies to text created with MTEXT. I have attached the .dwg.
View 4 Replies View RelatedHow do I load my .xtp hatch file from Arch 2008 into my Arch 2011 tool pallet?
View 9 Replies View RelatedWe are running ACA 2001 on WIndows Vista 64 bit. The Detail Component Manager will not open on (2) of our (7) machines and returns the error message: "Specified cast is not valid". The files are located on each machine. I have tried running a repair; I have copied the Detail Component Manger files over from the good machines, and I have also run a re-install and the Detail Component Manager still will not work.
View 6 Replies View RelatedWe just upgraded from ACA 2011 to ACA2012 and we are getting some wall cleanup issues with foundations. some walls, the footings show while adjacent wall (same style) footing disappears.
also, when i copy a wall where the footing is missing, the new copied wall shows the footing. when i move a wall without a footing, the footing shows up.
send me a link to tutorial to create a new cutom tab panels in a ribbon 2011
View 1 Replies View RelatedReviewing the ACA 2011 Curriculum for next year, I notice that Units 1 and 2 .dwg files are missing for the first two units. Is there a link to download the missing files?
View 3 Replies View Related