AutoCAD Architecture :: Can't Plot PDF On 2011
Jul 20, 2011I can't plot PDF on AA 2011.
View 3 Replies
ADVERTISEMENT
AutoCAD Architecture :: 2011 Crashes On All Computers Connected To Project When Plot Sheet Is Opened
Nov 15, 2010One to Five people has the same project loaded into their Project Navigator.
One of the people opens a plot sheet while using the Project Navigator.
ALL computers with that project loaded experience an Autocad 2011 Crash.
-No Error Message appears.
-Autocad shuts down completely with no warning.
-Simultaneously!
This only occurs with DWG files located under the Sheets Tab of the project navigator.
It is not Project specific. This has occured for different users in our office with different projects open. However Autocad only crashes for the users with the specific project accessing the plot sheet loaded.
We recently made the switch from 2009 to 2011. So far this is only a problem for projects where the plotsheets were created in 2009. We can't go back to 2009 to plot since the walls etc have now adapted to 2011.
AutoCAD Print / Plot :: KIP 3100 With 2011 Heidi Driver Crashes Upon Plot Preview
Sep 1, 2011AutoCAD Architecture 2011
Windows 7 x64
8GB RAM
Created new PC3 for KIP 3100 plotter using its AutoCAD Heidi driver for Win7x64. Upon plot preview the following error occurs.
This causes a crash report which has been submitted to Autodesk. The response was to install service pack 2. Error still occurs after installing the service pack.
Using the non-AutoCAD driver works.
AutoCad :: Cannot Plot Dashed Lines 2011
Feb 13, 2013I am trying to plot a drawing, Visual style: wireframe, occluded edges: dashed. The drawing has millimeters as the unit of measurement. I have tried this (taken from a website some of you might be familiar with):
[URL]
but it does not work. I set the ltscale as low as 0.01 but without result. I tried printing from "model" and "Layout" (everything is set at Wireframe and dashed occluded edges).
I have finished the drawings and documentation and this is holding me back from printing and sending what I have done.
AutoCad :: 2011 - Unable To Plot PDF Files / Job Cancelled
Jul 4, 2011I am unable to plot PDF files from my AutoCad 2011. Plots OK in Word etc so Windows 7 printer seems ok. Get error message : Job: - Canceled
Job ID: 8
Sheet set name:
Date and time started: 4/07/2011 11:48:32 AM
Date and time completed: 4/07/2011 11:48:33 AM
UserID: user
Profile ID: AutoCAD 2011 Prosteel Ribbon
Total sheets: 1
Sheets plotted: 0
Number of errors: 1
Number of warnings: 0
Sheet: - Canceled
File: D:ProjectsP079 - PDG Engineering for Standard Stacking ConveyorC DrawingsdwgsP079-BMSPR01-0000-SS-DR-0059 to 0066.dwg
Category name:
Page setup:
Device name: Adobe PDF_A3.pc3
Plot file path:
Paper size: A3
MESSAGE: Error : A StartDocPrinter call was not issued.
ERROR: The device has reported an unknown error.
Job: - Canceled
AutoCAD Print / Plot :: Banner Plotting With 2011 And Ricoh W3601?
Jan 11, 2012I'm using AutoCAD 2011 with a Ricoh Aficio W3601 plotter. Occassionally I need to plot out pipe wraps for projects that would be longer than a 36" sheet. Our plotter has a 36" x 150' roll capacity. I have figured out how to define a custom user size paper and get it to show up correctly under the properties button in the plot dialogue box. The print preview is correct, and the plotter cuts the paper off at the correct length, however, the printed portion of the plot is always cut off at 36" or is printed the wrong direction and limited by the roll width. I have tried every combination of landscape/portrait combination without success. I am trying to plot from the model tab using a 1:1 scale.
View 4 Replies View RelatedAutoCAD Architecture :: PDF Not Printing In 2011?
Sep 14, 2011I've got a .PDF of a survey attached (not overlayed) to my site plan construct...on a printable layer. In my sheet it shows up. When I print preview it's there. When it comes out of the plotter it's not there. If I print the PDF by itself through Acrobat it prints fine. Is there a bug here?
View 2 Replies View RelatedAutoCAD Architecture :: 2011 - Tag Not Updating?
Aug 10, 2011I’m having a problem with ACA 2011 and tags (prop sets).
They are not updating When add any type of tag to an object. It’s coming up as –
I have download the sp2 and it seems to fix the problem, but then it comes back again. Some PC are working and other are not.
The only workaround I have got is to remove ACA from the regedit and run CAD again or run the update msi.
AutoCAD Architecture :: 2011 Switching Drawings By Itself?
Apr 8, 2011Several users here in my office have been having a strange issue with ACA 2011. When doing various things such as, saving, regen'ing, or manually switching between open drawings, ACA will "blink" to a completely different drawing.
For example, right now I have 4 drawings open. I'm trying to go from drawing A to drawing B. It goes to drawing B and starts to regen model space, then it blinks back to drawing A. Does the same for any of the 4 drawings. Only way to make it stop was to close drawing A.
As I said, it not only does this when switching drawings. It'll also do it after it's done saving and when I try to regen.
AutoCAD Architecture :: Explode Blocks In 2011?
Jul 13, 2012Is it possible in ACA2011 to explode a block, but control what layer the pieces go to?
I have a block for a closet rod and shelf , but it always has to be re-sized once in the drawing so i must explode it. since it was made on layer 0 it explodes to that layer and I have to change the items to the proper layer.
AutoCAD Architecture :: Plotting To PDF In 2011 And 2012?
May 23, 2011After I plot to pdf, I get an error message: You do not have a PDF viewing application installed. Go to the internet and dowload a pdf viewer. The problem is that Acrobat Reader X is installed on my computer. I saw the thread about Reader X having spooling issues, so I reinstalled Acrobat Reader 9. Still get the same message.I can go to the file afterwards and open it, despite this message, but it is supposed to open from Architecture after it is plotted and it won't do that.
View 4 Replies View RelatedAutoCAD Architecture :: Can't Import DGN From 2013 But Could From 2011
May 22, 2013I am having issues with drawings from a consultant. They are sending us DGN files and they do not seem to want to import in the latest AutoCAD Architecture 2013 I have deployed throughout the offce. However, these same drawings have no problem in importing to AutoCAD Architecture 2011. In 2013, I get no activity once I select the file to import. If I click on the screen once, the program dims and the program says it is not responding. But I have no problem with 2011.
View 9 Replies View RelatedAutoCAD Architecture :: 2011 Freezes On Commands
Apr 29, 2011When I give keyboard commands to open, save or save as the program freezes. Pulldown menu to open and save work fine but pulldown save as freezes and freezes when using commands on "A". Happening in 2009 also. Same thing happened yesterday, repair did not fix it, so uninstalled and reinstalled and all was fine. Now today freezing again.
Had a blue screen message yesterday when I turned on the computer, bad spooler something. Are these problems related or just a coincidence? Using Windows XP. Autocad is up to date as is Windows.
AutoCAD Architecture :: Export From 2011 To CINEMA 4D R11.5?
Feb 6, 2011how to export creations from AutoCAD Architecture 2011 to CINEMA 4D R11.5 ?
View 4 Replies View RelatedAutoCAD Architecture :: Unable To Snap To Walls In 2011
Apr 28, 2010After upgrading to ACA 2011 in plan view I am unable to snap to the edges of walls. Toggling the osnap setting check box to allow object snap to act on wall justification lines seems to have no effect as it always snaps only to the justification line and to nothing else. This is extremely annoying and makes it impossible to dimension to the face of a wall that is center justified. Is this a bug or am I missing some new setting somewhere? All my layers are unfrozen including layer 0.
View 9 Replies View RelatedAutoCAD Architecture :: Arch 2011 Crashing Upon Close?
Sep 23, 2010I'm having an issue where AutoCad Architecture 2011 is crashing on some but not all machines (4 total) when a file is closed.
We are also getting what appears to be random slow downs on files when opening and a jumpy mouse that makes drawing impossible. I have not been able to establish a pattern to point at specific files to being the problem as it happens across several the are fine one day, not fine the next and fine again a day later. All stations are identical.
Win 7 Pro - 64 bit
Intel Xeon cpu 3.60Ghz (2 processors)
9 BG RAM
NVIDIA GeForce GT 240
AutoCAD Architecture :: 2011 - Delay / Lag When Info Box Appears
Mar 9, 2011I got a problem with my autocad architecture 2011.
View 2 Replies View RelatedAutoCAD Architecture :: 2011 - Error - Cannot Open Database
Apr 29, 2010I get a window popping up that says "Cannot open database C:ProgramDataAutodeskACA 2011enuDetailsDetails (US)AecDtlComponents (US).mdb." I have reinstalled ACA 2011, I have copy this same file from another computer, verified the permissions etc... I can click ok and keep working but it randomly will pop up 3-4 or 5 times in a row and I cannot link it to any one event (Can’t cause it to re occur) Also, I cant access the details component manager.
View 9 Replies View RelatedAutoCAD Architecture :: 2011 EXTREMELY Jumpy Cursor?
Mar 23, 2011I have a sluggish jerky cursor (and it’s not the operator) when you are NOT in a command and while you are creating your selection set in the command. The cursor jumps and reappears @ ~1 sec intervals so you have to anticipate your mouse move to do anything. OH...and it's only happens in model space.
I tried several settings I found on the internet but nothing works. It's only doing it in 3 drawings right now. The latest one was working fine until ~10:00 this morning, then it started in...no issues before this.
It really makes AutoCAD 2011 basically unusable as it takes 5X longer to complete each command!
AutoCAD Arch 2011
Win 7 64 bit
2.93 Ghz i7
8gb RAM
NVIDIA GeForce GTX 465
AutoCAD Architecture :: 2011 Block Authoring Palette?
Mar 15, 2011I have ACA 2011 on 64 bit Windows 7. I can't seem to find the block authoring palette anywhere..
View 2 Replies View RelatedAutoCAD Architecture :: Changing Text Styles Between 2011 And 2012?
Jul 30, 2013I would like to preface this post by stating, for the purposes of this message, that I have absolutely no understanding of the workings of AutoCAD. I have looked at many forum discussions concerning my issue and I am simply unable to understand the terminology and/or concepts being described.
I recently purchased a new computer for my office. Accordingly, I needed to install AutoCAD on this new machine. All of the machines in my office are running AutoCAD 2011. However, after addressing some licensing issues with AutoDesk, I received a license and installer for AutoCAD 2012. Everything was installed correctly (as far as I understand) and the program itself is working fine. The problem I am running into involves the text style for the files I open:
For files saved on AutoCAD 2011, the text style used is Arial. Simple; no custom fonts. However, when I open that same file in AutoCAD 2012, the text style for the entire file has changed to Franklin Gothic Book. (Note that all files are accessible from all computers in the office through a network drive)
That is my only understanding of the situation. As I mentioned earlier I have very little understanding of the workings of AutoCAD. I have had this problem for almost a week now and I am no closer to understand this issue, much less solving it.
AutoCAD Architecture :: 2011 - TTFF Appears And Prints Dark
May 3, 2011Multiline text appears dark with a true type font. I have searched the boards and changed the Z coordinate to "0" manually, as well as the flatten command....still no luck. The text was generated from the QLEADER command, but the problem also applies to text created with MTEXT. I have attached the .dwg.
View 4 Replies View RelatedAutoCAD Architecture :: 2011 - Load XTP File To Tool Pallet
May 17, 2011How do I load my .xtp hatch file from Arch 2008 into my Arch 2011 tool pallet?
View 9 Replies View RelatedAutoCAD Architecture :: Detail Component Manager Will Not Open In 2011?
Oct 13, 2010We are running ACA 2001 on WIndows Vista 64 bit. The Detail Component Manager will not open on (2) of our (7) machines and returns the error message: "Specified cast is not valid". The files are located on each machine. I have tried running a repair; I have copied the Detail Component Manger files over from the good machines, and I have also run a re-install and the Detail Component Manager still will not work.
View 6 Replies View RelatedAutoCAD Architecture :: Upgrade 2011 To 2012 - Wall Cleanup
May 1, 2013We just upgraded from ACA 2011 to ACA2012 and we are getting some wall cleanup issues with foundations. some walls, the footings show while adjacent wall (same style) footing disappears.
also, when i copy a wall where the footing is missing, the new copied wall shows the footing. when i move a wall without a footing, the footing shows up.
AutoCAD Architecture :: Create New Custom Tab Panels In Ribbon 2011
Oct 15, 2011send me a link to tutorial to create a new cutom tab panels in a ribbon 2011
View 1 Replies View RelatedAutoCAD Architecture :: 2011 Backwards And Forward Compatibility With 2008?
Dec 27, 2010Is there any reason to keep 2008 if you have a new copy of 2011? Any old features lost or old files types that can't be opened in 2011 that worked in 2008?
What's the best ways to make sure files edited and saved in 2011 can also be opened and fully edited by users of 2008?
Save as older version? Export as IFC? Something else?
AutoCAD Architecture :: Missing Units Files In 2011 Fundamentals Curriculum
May 24, 2011Reviewing the ACA 2011 Curriculum for next year, I notice that Units 1 and 2 .dwg files are missing for the first two units. Is there a link to download the missing files?
View 3 Replies View RelatedAutoCAD Architecture :: 2011 / Counting Blocks Inserted In Current Drawing
Apr 5, 2012I was looking for a way of counting blocks inserted in my current drawing.
F1, brings up HELP.
In the search box i type BLOCKS.
Results =
Overview of Hatch Pattern Definitions
Create a Shortcut Menu
Overview of Shape files
Overview of slides
Work with User Interface Elements
Multiple Drawing Folders
AutoCAD Architecture :: Get Dimension / Door And Window Styles From 2011 To 2012
Sep 7, 2011How do I get my dimension styles, door styles, window styles, etc. from Architectural 2011 to 2012? I migrated but I don't see where it brought my styles over.
View 4 Replies View RelatedAutoCAD Architecture :: Are Opentype Fonts Supported In 2010 / 2011 Or 2012?
Feb 15, 2012are opentype fonts supported in 2010, 2011 or 2012?
View 3 Replies View Related