AutoCAD Architecture :: 2011 - Error - Cannot Open Database
Apr 29, 2010
I get a window popping up that says "Cannot open database C:ProgramDataAutodeskACA 2011enuDetailsDetails (US)AecDtlComponents (US).mdb." I have reinstalled ACA 2011, I have copy this same file from another computer, verified the permissions etc... I can click ok and keep working but it randomly will pop up 3-4 or 5 times in a row and I cannot link it to any one event (Can’t cause it to re occur) Also, I cant access the details component manager.
View 9 Replies
ADVERTISEMENT
Mar 17, 2012
When i try to use Import Survey Database 'Create New Survey Database' i receive the following error.
Running Windows 7 Pro 64-bits and its fully updated. Also installed all the servicepacks available for Civil 3D
View 1 Replies
View Related
Jan 18, 2011
My office currently has a unique keynote database for each project. When I open a file with a sheet keynote legend, AutoCAD 2010 opens up the correct database and everything is fine. This is also true when I try to plot a sheet file. However, when I plot through the batch-plot process, AutoCAD does not open the correct database.
View 1 Replies
View Related
Mar 4, 2013
I am getting an error when I try to use my detail components.
It said it cannot find the AecDtlComponents (US).mbd. I have found the database and opened it up. It looks fine.
When I go into my options under AEC content I add a "Detail Component Database" it said "cannot open database... AecDtlComponents.mbd"
An imgae of the error is attached below.
how to install the database?
View 9 Replies
View Related
Sep 28, 2012
We are using Autodesk Architecture 2013 running on 64bit Windows 7 workstations. When I try to access the Detail Component Database I get an error message stating the AecDtlComponents (US).mdb will not open. I went into Tools-->Options-->AEC Content and tried to Add/Remove a database but the list was empty. When I try to Add a database I get the same error message AecDtlComponents (US).mdb will not open.
View 5 Replies
View Related
Aug 28, 2012
We are using AutoCAD Civil 3D Land Desktop Companion 2009 on all machines and one of our machines is getting the message "Error opening Point Database" and then gives the project file pathcogopoints.mdb.
It also gives the message "The Microsoft Jet database engine cannot open the file. It is already opened exclusively by another user, or you need permission to view its data." It is not opened by another user and permissions have been given for all machines to access these files.
Background information: We move older projects to an external hard drive for archiving and occasionally need to access them as the need arises. We have done this successfully for some time without issue, but now one of our machines is giving the above error. The other machine, which the external hard drive is connected, does not have this problem. We tried moving one project file back to the original location and it seemed to work okay, but another file did not. Some files were created using an older vrsion of AutoCAD, but that has not been a problem with opening them in the past. All sharing permissions to the external hard drive have been checked and seem to be working properly.
View 2 Replies
View Related
Oct 13, 2010
We are running ACA 2001 on WIndows Vista 64 bit. The Detail Component Manager will not open on (2) of our (7) machines and returns the error message: "Specified cast is not valid". The files are located on each machine. I have tried running a repair; I have copied the Detail Component Manger files over from the good machines, and I have also run a re-install and the Detail Component Manager still will not work.
View 6 Replies
View Related
Feb 17, 2011
got this error on a machine here ... FATAL ERROR: Unhandled e0434f4dh Exception at 768642ebh and went through the discussion group for an answer and found it saying to remove the net framworks ... but my question is if the net framworks is corrupt on the machine with the errors, and we have the automatic updates, then why wouldn't all the machines come up with this fatal error?
View 1 Replies
View Related
Jun 7, 2009
I've been using Photoshop Elements 5.0 for a few years now on my PC running Vista. Beginning just a few days ago (and unconnected to any updates of which I am aware), I started getting an error when I tried to delete or import files in the Organizer. The error says: ODBC data source [Microsoft] [ODBC Microsoft Access Driver] Cannot open database "I". It may not be a database that your application recognizes, or the file may be corrupt. The photos are there - I can see them in Windows Photo Gallery. I can delete photos from there as well. Just not in Organizer. Wondered if anyone might be able to point me in a good direction for a fix?
View 2 Replies
View Related
Aug 26, 2012
Once I have the dwg open how do I get to the database?
Dim AcadApp As Object = Nothing Dim AcadDoc As Object = Nothing Try AcadApp = GetObject(, "AutoCAD.Application.18") Catch ex As Exception AcadApp = CreateObject("AutoCAD.Application.18") End Try AcadApp.Visible = False Try AcadDoc = AcadApp.Documents.Open("C:UsersPAULDesktopB-03-J-H135.dwg", True) Catch ex As Exception Exit Sub End Try Dim MyDb As Database = AcadApp.DocumentManager.MdiActiveDocument.Database
View 4 Replies
View Related
May 21, 2012
How I can cut from one keynote database and paste to another? in keynote editor?
View 1 Replies
View Related
Jun 19, 2012
How do you modify the database and generate the size of items needed within the software from the Detail Component Database? Can you Adjust sizes? Are there more items to select?
View 1 Replies
View Related
Sep 14, 2011
I've got a .PDF of a survey attached (not overlayed) to my site plan construct...on a printable layer. In my sheet it shows up. When I print preview it's there. When it comes out of the plotter it's not there. If I print the PDF by itself through Acrobat it prints fine. Is there a bug here?
View 2 Replies
View Related
Jul 20, 2011
I can't plot PDF on AA 2011.
View 3 Replies
View Related
Aug 10, 2011
I’m having a problem with ACA 2011 and tags (prop sets).
They are not updating When add any type of tag to an object. It’s coming up as –
I have download the sp2 and it seems to fix the problem, but then it comes back again. Some PC are working and other are not.
The only workaround I have got is to remove ACA from the regedit and run CAD again or run the update msi.
View 2 Replies
View Related
Jun 17, 2013
When I try to create a survey database I get FATAL ERROR: Unhandled e0434352h Exception at fe139e5dh.
I have repairing both AutoCAD and .Net 4, I also did a regedit on the CommunicationCenter.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
View 9 Replies
View Related
Apr 8, 2011
Several users here in my office have been having a strange issue with ACA 2011. When doing various things such as, saving, regen'ing, or manually switching between open drawings, ACA will "blink" to a completely different drawing.
For example, right now I have 4 drawings open. I'm trying to go from drawing A to drawing B. It goes to drawing B and starts to regen model space, then it blinks back to drawing A. Does the same for any of the 4 drawings. Only way to make it stop was to close drawing A.
As I said, it not only does this when switching drawings. It'll also do it after it's done saving and when I try to regen.
View 9 Replies
View Related
Jul 13, 2012
Is it possible in ACA2011 to explode a block, but control what layer the pieces go to?
I have a block for a closet rod and shelf , but it always has to be re-sized once in the drawing so i must explode it. since it was made on layer 0 it explodes to that layer and I have to change the items to the proper layer.
View 9 Replies
View Related
May 23, 2011
After I plot to pdf, I get an error message: You do not have a PDF viewing application installed. Go to the internet and dowload a pdf viewer. The problem is that Acrobat Reader X is installed on my computer. I saw the thread about Reader X having spooling issues, so I reinstalled Acrobat Reader 9. Still get the same message.I can go to the file afterwards and open it, despite this message, but it is supposed to open from Architecture after it is plotted and it won't do that.
View 4 Replies
View Related
May 22, 2013
I am having issues with drawings from a consultant. They are sending us DGN files and they do not seem to want to import in the latest AutoCAD Architecture 2013 I have deployed throughout the offce. However, these same drawings have no problem in importing to AutoCAD Architecture 2011. In 2013, I get no activity once I select the file to import. If I click on the screen once, the program dims and the program says it is not responding. But I have no problem with 2011.
View 9 Replies
View Related
Apr 29, 2011
When I give keyboard commands to open, save or save as the program freezes. Pulldown menu to open and save work fine but pulldown save as freezes and freezes when using commands on "A". Happening in 2009 also. Same thing happened yesterday, repair did not fix it, so uninstalled and reinstalled and all was fine. Now today freezing again.
Had a blue screen message yesterday when I turned on the computer, bad spooler something. Are these problems related or just a coincidence? Using Windows XP. Autocad is up to date as is Windows.
View 7 Replies
View Related
Feb 6, 2011
how to export creations from AutoCAD Architecture 2011 to CINEMA 4D R11.5 ?
View 4 Replies
View Related
Apr 28, 2010
After upgrading to ACA 2011 in plan view I am unable to snap to the edges of walls. Toggling the osnap setting check box to allow object snap to act on wall justification lines seems to have no effect as it always snaps only to the justification line and to nothing else. This is extremely annoying and makes it impossible to dimension to the face of a wall that is center justified. Is this a bug or am I missing some new setting somewhere? All my layers are unfrozen including layer 0.
View 9 Replies
View Related
Sep 23, 2010
I'm having an issue where AutoCad Architecture 2011 is crashing on some but not all machines (4 total) when a file is closed.
We are also getting what appears to be random slow downs on files when opening and a jumpy mouse that makes drawing impossible. I have not been able to establish a pattern to point at specific files to being the problem as it happens across several the are fine one day, not fine the next and fine again a day later. All stations are identical.
Win 7 Pro - 64 bit
Intel Xeon cpu 3.60Ghz (2 processors)
9 BG RAM
NVIDIA GeForce GT 240
View 7 Replies
View Related
Mar 9, 2011
I got a problem with my autocad architecture 2011.
View 2 Replies
View Related
Mar 23, 2011
I have a sluggish jerky cursor (and it’s not the operator) when you are NOT in a command and while you are creating your selection set in the command. The cursor jumps and reappears @ ~1 sec intervals so you have to anticipate your mouse move to do anything. OH...and it's only happens in model space.
I tried several settings I found on the internet but nothing works. It's only doing it in 3 drawings right now. The latest one was working fine until ~10:00 this morning, then it started in...no issues before this.
It really makes AutoCAD 2011 basically unusable as it takes 5X longer to complete each command!
AutoCAD Arch 2011
Win 7 64 bit
2.93 Ghz i7
8gb RAM
NVIDIA GeForce GTX 465
View 9 Replies
View Related
Mar 15, 2011
I have ACA 2011 on 64 bit Windows 7. I can't seem to find the block authoring palette anywhere..
View 2 Replies
View Related
Nov 27, 2013
what other programme you can open survey databases in? Up until about Civil3D 2011 you could open them up in MS Access, but the type of database has been changed and I can't do that anymore.
The reason I want to do this is that opening the database in Civil3D does not expose all of the contents of the database eg. prism constants. I would like to see the entire contents of the database.
Civil3D 2014 - Windows7 64bit
View 6 Replies
View Related
Jul 30, 2013
I would like to preface this post by stating, for the purposes of this message, that I have absolutely no understanding of the workings of AutoCAD. I have looked at many forum discussions concerning my issue and I am simply unable to understand the terminology and/or concepts being described.
I recently purchased a new computer for my office. Accordingly, I needed to install AutoCAD on this new machine. All of the machines in my office are running AutoCAD 2011. However, after addressing some licensing issues with AutoDesk, I received a license and installer for AutoCAD 2012. Everything was installed correctly (as far as I understand) and the program itself is working fine. The problem I am running into involves the text style for the files I open:
For files saved on AutoCAD 2011, the text style used is Arial. Simple; no custom fonts. However, when I open that same file in AutoCAD 2012, the text style for the entire file has changed to Franklin Gothic Book. (Note that all files are accessible from all computers in the office through a network drive)
That is my only understanding of the situation. As I mentioned earlier I have very little understanding of the workings of AutoCAD. I have had this problem for almost a week now and I am no closer to understand this issue, much less solving it.
View 6 Replies
View Related
May 3, 2011
Multiline text appears dark with a true type font. I have searched the boards and changed the Z coordinate to "0" manually, as well as the flatten command....still no luck. The text was generated from the QLEADER command, but the problem also applies to text created with MTEXT. I have attached the .dwg.
View 4 Replies
View Related
May 17, 2011
How do I load my .xtp hatch file from Arch 2008 into my Arch 2011 tool pallet?
View 9 Replies
View Related
