AutoCAD Architecture :: 2011 Crashes On All Computers Connected To Project When Plot Sheet Is Opened
Nov 15, 2010
One to Five people has the same project loaded into their Project Navigator.
One of the people opens a plot sheet while using the Project Navigator.
ALL computers with that project loaded experience an Autocad 2011 Crash.
-No Error Message appears.
-Autocad shuts down completely with no warning.
-Simultaneously!
This only occurs with DWG files located under the Sheets Tab of the project navigator.
It is not Project specific. This has occured for different users in our office with different projects open. However Autocad only crashes for the users with the specific project accessing the plot sheet loaded.
We recently made the switch from 2009 to 2011. So far this is only a problem for projects where the plotsheets were created in 2009. We can't go back to 2009 to plot since the walls etc have now adapted to 2011.
View 6 Replies
ADVERTISEMENT
Sep 1, 2011
AutoCAD Architecture 2011
Windows 7 x64
8GB RAM
Created new PC3 for KIP 3100 plotter using its AutoCAD Heidi driver for Win7x64. Upon plot preview the following error occurs.
This causes a crash report which has been submitted to Autodesk. The response was to install service pack 2. Error still occurs after installing the service pack.
Using the non-AutoCAD driver works.
View 1 Replies
View Related
Jun 15, 2011
Often when I attempt to insert a sheet list from the project navigator to a sheet, nothing happens. The sheet index will not insert. Why does this happen? Better yet, how can I fix it?
View 2 Replies
View Related
Jul 20, 2011
I can't plot PDF on AA 2011.
View 3 Replies
View Related
Jan 25, 2012
I would like to copy a sheet from one project to another. Nothing changes from one to the other. Much like copying a view, I would like to copy a sheet. Is this possible and how?
View 3 Replies
View Related
Sep 1, 2011
Is it possible to insert a project detail field in a sheet column?
View 2 Replies
View Related
Jun 26, 2012
I've created a sheet template that includes Fields to populate the sheet with the Project Name and location among others like scale, etc. When I create the new sheet in the project navigator most of the fields populate with the correct information based on the parameters set in the project. However, it consistantly does not populate the Project name and location. When I click the field and ensure that the attribute is set correctly then it renders the correct information. The problem is this ends up being a manual operation yet it still reads as a smart tag. Why do these not populate automatically?
Here's my process:
Create dwt for sheet file and include xref of title block.
Create a block with attributes that link to AEC Project, CurrentSheetTitle, etc. and insert into dwt.
In project navigator I create new sheet and select my template.
Information does not populate.
But when I view the block and close (no edits) it then links.
View 6 Replies
View Related
Jul 8, 2013
When I bring an xref drawing (floor plan) into a plot sheet drawing the xref does not display properly. Walls at doors are not removed and have jambs and door in what appears to be 'reflected screened' view. Switching to 'reflected' view, walls not removed, jambs and doors, and windows still showing.
I may have inadvertently changed some of the settings in the display manager, is there any way to restore the defaults here without reloading the program?
View 3 Replies
View Related
Oct 31, 2013
I have a set of drawings.
Titleblocks are drawing files with the floors xref'd in.
It's a pretty regular aggregate xref method.
I have a sheet with a roof plan.
The third floor (unique xref - attach) has vpcolours assigned to layers so that the walls show greyed out, for routing roof drains.
If I plot this sheet on it's own, the walls below show.
If I plot the whole set by shift clicking the drawings in the sheet set, and choosing publish to PDF, this drawing doesn't show. I get the roof plan without the xref'd walls below showing.
I'd like to issue one pdf file of the whole set, but this one sheet in the middle isn't showing. I don't have an adobe suite to plot the roof plan on it's own and cut it in for the wrong one because $1500.00
I'd like to be able to plot the draiwng correctly from AutoCAD.
View 1 Replies
View Related
Jun 25, 2013
It seems that once my newly purchased autocad lt. 13 opens up a drawing created by an other co-worker in autocad Lt. 11, it automaticly converts to 13 and now the person using 11 can no longer open the file. what I should do?
View 3 Replies
View Related
Jun 21, 2010
I bought Autocad Arch. 2008 for my Dell Laptop and now my laptop is going down hill fast. It is 5 years so I'm not expecting to much. I'm looking to replace it with one of the new Macbook Pros.
View 6 Replies
View Related
Apr 11, 2011
We would like to have everyones workspaces on each computer. So if I have a problem with my computer and Bob is gone, then I can work on Bob's computer with my workspace. Then Bob can come back and switch back to his workspace.
Where do I find the workspace, so I can copy it to the other computers?
View 5 Replies
View Related
May 14, 2012
Using someone elses template. When I plot to PDF the layout sheet name is not the PDF plot file name, it uses the drawing file name (and hence the same file name for all plots, not what I want). When I plot in paper space, my layout sheet name is the output file name, is there a way to change this?
View 6 Replies
View Related
Dec 6, 2011
I have a Project Template that is used when creating a new project. I noticed that the Tool Palette in the Project Template and the Tool Palette in the new Project are not the same. How do I get the new Projects to pull the same Tool Palettes from the Project Template?
View 2 Replies
View Related
May 8, 2013
Photoshop Elements. Increasing brush-size crashes Windows 8 when HDMI cable connected to TV or data projector. I'm using Asus N56V notebook with Nvidia 635M dedicated graphics card with latest driver.
View 13 Replies
View Related
Jun 15, 2009
When I publish my sheet to PDF, dimensions of my sheet is broken.
View 9 Replies
View Related
May 17, 2011
I have added reference acdbmgd/acmgd from C:Program FilesAutodeskAutoCAD 2011 with copy local =false I can see from the list the version are 18.0.0.0
But when I start debug the project I got the following error..This project used to work with AutoCAD2010, now just moved to 2011 I can't even start debuging
System.IO.FileLoadException: A procedure imported by 'acmgd, Version=18.0.0.0, Culture=neutral, PublicKeyToken=null' could not be loaded.
File name: 'acmgd, Version=18.0.0.0, Culture=neutral, PublicKeyToken=null' ---> System.Runtime.InteropServices.COMException (0x8007007F): The specified procedure could not be found. (Exception from HRESULT: 0x8007007F) at System.ModuleHandle.ResolveMethod(Int32 methodToken, RuntimeTypeHandle* typeInstArgs, Int32 typeInstCount, RuntimeTypeHandle*
[code]....
When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.
View 6 Replies
View Related
Dec 26, 2013
I'm running Adobe Premiere Pro CC on a 2011 Macbook Pro, and I was working on a project. When I went to render the whole sequence, Premiere froze and auto quit. When I went to open the project again, I got the error:
"This Project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type."
Every version of the project's auto-save files gave the same error. I tried all of the suggested tips like deactivation and clean uninstall, but nothing's changed.
Will taking the project to another computer work?
View 4 Replies
View Related
Sep 21, 2013
I have Lightroom 5.2, which I installed a few days ago. Yesterday, it started failing to open with a crash report generated. I read that upgrading to OS X 10.8.5 fixed this crash. So I upgraded yesterday evening. However I still get a crash. I do have a HD that I recently installed (perhaps 1 week ago) that is 3 TB. I can also open LR 4 and I did delete the Lightroom 5 preference file. Here is the crash report that appears a few seconds into trying to start up LR 5.2.
View 1 Replies
View Related
Feb 13, 2013
I am trying to plot a drawing, Visual style: wireframe, occluded edges: dashed. The drawing has millimeters as the unit of measurement. I have tried this (taken from a website some of you might be familiar with):
[URL]
but it does not work. I set the ltscale as low as 0.01 but without result. I tried printing from "model" and "Layout" (everything is set at Wireframe and dashed occluded edges).
I have finished the drawings and documentation and this is holding me back from printing and sending what I have done.
View 9 Replies
View Related
Jul 7, 2010
Never had this issue when running past versions of Autocad but every time i try and hatch using 'pick internal points' the program crashes. "FATAL ERROR - Out of memory - shutting down" message comes up every time. Hatching by selecting an object works fine but most of time this option is unusable.
2.66ghz
3.25gb ram
windows xp 32 bit
NVIDIA Quadro FX 570
View 8 Replies
View Related
Mar 16, 2014
Been using Prem Pro CC for a few months and working on a project yesterday, went to open today and the message below came up!
I then tried opening up previous projects and the same again has happened with the below message.
"This project contained a sequence that could not be opened. No sequence preview file or codec could be associated with this sequence type."
View 2 Replies
View Related
Jul 4, 2011
I am unable to plot PDF files from my AutoCad 2011. Plots OK in Word etc so Windows 7 printer seems ok. Get error message : Job: - Canceled
Job ID: 8
Sheet set name:
Date and time started: 4/07/2011 11:48:32 AM
Date and time completed: 4/07/2011 11:48:33 AM
UserID: user
Profile ID: AutoCAD 2011 Prosteel Ribbon
Total sheets: 1
Sheets plotted: 0
Number of errors: 1
Number of warnings: 0
Sheet: - Canceled
File: D:ProjectsP079 - PDG Engineering for Standard Stacking ConveyorC DrawingsdwgsP079-BMSPR01-0000-SS-DR-0059 to 0066.dwg
Category name:
Page setup:
Device name: Adobe PDF_A3.pc3
Plot file path:
Paper size: A3
MESSAGE: Error : A StartDocPrinter call was not issued.
ERROR: The device has reported an unknown error.
Job: - Canceled
View 3 Replies
View Related
Feb 3, 2012
I created a number of 3D blocks to be inserted into a 3D model of a building. I created the blocks in a separate drawing first; i defined them locally, then, when i had them the way i wanted them, I used "wblock" to save all of these blocks to a folder.
I then opened the 3D building model and tried to insert one of my new blocks. I repeatedly get the following:
"AutoCAD Application has stopped working"
with the following info from microsoft:
"Description:
Stopped working
Problem signature:
Problem Event Name: APPCRASH
Application Name: acad.exe
Application Version: 24.1.208.0
Application Timestamp: 4dbf9c16
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7601.17651
Fault Module Timestamp: 4e21213c
Exception e053534f
Exception Offset: 000000000000cacd
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033"
I have tried repairing my installation of autocad with no improvement.
i tried opening the drawing of the block itself, copying it, and pasting it via the "copybase" command into the other drawing with the same result.
Occasionally, autocad will ask me if i'd like to debug the program (and visual studio opens) -- it mentions a "StackOverflowException" within acad.exe, and also mentioned "windowsbase.dll".
I am using windows 7 pro x64 and autocad 2011.
CPU: intel i7
Graphics: NVidia GeForce GTS 250
8GB DDR3 ram
The autocad error-reporting dialog never gets launched as it is forced to close before this point.
View 3 Replies
View Related
Jun 14, 2013
Someone in the office is running AutoCAD 2011 (Windows 7) and the program keeps closing itself just saying fatal error. It seems to happen when a command is entered, particularly while editing text which seems to close it every time. It's not limited to editing text though. It happens on multiple files as well. I've read there were some issues with 2010 closing while editing text but I can't seem to find anything about 2011 having problems with it. She restarted her computer and it seems to be working now, but this has happened in the past and the problem will come back.
View 1 Replies
View Related
Jan 14, 2014
Just recently premiere will crash if i open a browser window then return to the premiere software. run down of what i am working with:
Windows 8.1 64 bit, Intel i7-3770k, 16 gigs of ram, Nividia 650, Anker 5000 gaming mouse, Native Instruments Komplete Audio 6, and the normal other insides (SSD 256 for os and software and a few SATA drives).
If i just stay working in the premiere environment it will continue to work, its only when i leave the program.
View 2 Replies
View Related
Jun 21, 2012
Recently (In the past 6 months) I have noticed that Sheet Set Manager is very slow when trying to do anything. It takes at least 45 seconds for a box to appear when right clicking on SSM to publish or change properties. Every user in our office has the same problem. I am not sure if this is a network problem or if it is a problem with C3D ?
View 9 Replies
View Related
Sep 29, 2011
We have used Inventor 2010 with PSP 2011.
- Recently we have upgrade to Inventor 2012.
- Installed pspro_cad_fp_10.0.39.3 update for PSP Server and for PSP Clients.
And now, some drawings we can not open in Inventor 2012. Inventor crashes!
But some drawings we are lucky to be able to open and work with.
Drawings have the same template.
If the drawing is locked (read only) then inventor 2012 can open it without a crash.
If I drag&drop drawing out from PSP onto my Desktop, Inventor 2012 can open drawing without problems.
So we are not able to work with some drawings in Inventor 2012 and PSP 2011.
As the first and quick (and 100%) solution - rollback to Inventor 2010 can cost us about 5 man-days of work. (Because we have done some work in Inventor 2012 allready and will not be able to work with this in Inventor 2010)
View 4 Replies
View Related
Feb 7, 2012
I am having an issue running AutoCAD LT 2011 on a Windows 7 Pro 64-bit. If I have orthographic dimensions on the drawing, AutoCAD crashes if I try to move, modify, or delete the dimensions. Recovery does not work. I am stuck with the dimensions once they are placed because if I touch them, the program crashes.
I do not know if this is important but I will include it anyway: this does not happen with older drawings that were created under older versions of AutoCAD LT. It only happens with ortho dimensions created in LT 2011.
I have applied all the latest patches, drivers for the video card, and even tried opening the drawings in 32-bit mode. Nothing seems to work.
My system is a Dell Precision T3500 Windows 7 Professional SP1 64-bitIntel Xeon Dual Core 2.53GHz cpu12GB ramNvidia Quadro 4000 running Nvidia driver version 265.70
View 9 Replies
View Related
Oct 4, 2010
I am having a problem with AutoCAD crashing without fully loading. I will get the splash screen and the application background will momentarily appear with "AutoCAD 2011" in the title bar then it will all disappear with no visible error message. By checking ACD2011ENUAdlm.log in C:Documents and SettingsAll UsersApplication DataAutodeskAdlm I get the following error message:
3536 2010/10/04 10:05:39 Reason=Fatal error
View 9 Replies
View Related
Jan 11, 2012
I'm using AutoCAD 2011 with a Ricoh Aficio W3601 plotter. Occassionally I need to plot out pipe wraps for projects that would be longer than a 36" sheet. Our plotter has a 36" x 150' roll capacity. I have figured out how to define a custom user size paper and get it to show up correctly under the properties button in the plot dialogue box. The print preview is correct, and the plotter cuts the paper off at the correct length, however, the printed portion of the plot is always cut off at 36" or is printed the wrong direction and limited by the roll width. I have tried every combination of landscape/portrait combination without success. I am trying to plot from the model tab using a 1:1 scale.
View 4 Replies
View Related
