Photoshop Elements. Increasing brush-size crashes Windows 8 when HDMI cable connected to TV or data projector. I'm using Asus N56V notebook with Nvidia 635M dedicated graphics card with latest driver.
View 13 RepliesI'm using windows XP with Photoshop CS.
Whenever the network cable is connected to the computer, Photoshop start-up load time is significantly longer than when I pull the network cable out.
i have photoshop cc and it will crash randomly when i like resize or use brush tool. My drivers are up to date and i fresh installed windows 7 64bit. My GPU is a AMD Radeon HD 6800 series and photoshop doesnt reconise my GPU URL....and i used event viewer and this is what i have Faulting application name:
Photoshop.exe, version: 14.0.0.0, time stamp: 0x5176451bFaulting module name: aticfx64.dll, version: 8.17.10.1191, time stamp: 0x5154f6c5Exception code: 0xc0000005Fault offset: 0x000000000009136eFaulting process id: 0x1498Faulting application start time: 0x01ce889cd7ac9d85Faulting application path: C:Program FilesAdobeAdobe Photoshop CC (64 Bit)Photoshop.exeFaulting module path: C:Windowssystem32aticfx64.dllReport Id: 58d62216-f493-11e2-b673-8c89a5638937
multiple crashes of Photoshop Elements 10 on Windows 7. Also, restore gets hung up saying the hard drive or flash drive used needs new firmware installed.
View 2 Replies View RelatedI was fortunate to have a photo selected for a magazine cover. I never expected to use anything from this series so instead of my usual raw/22 MP defalut, I happened to be in jpeg thinking it was just for planning, etc.In any case, the image they like is 5.4 MP jpeg. They claim to need 12 MP minimum to avoid pixlelation.
View 2 Replies View RelatedI usually do photoshop work in an 800 x 600 pixel range. I tried to post a new picture on a website this morning and it came as a 171 x something , tiny little picture that could not be enlarged. How can I increase the size of my pictures? This is my first attempt using the Revel site.
View 2 Replies View RelatedI've to inseart a color overlay in a 200 icon set.
Till last week the batch tool was working properly to do this action. Since yesterday, when I use the same action the batch works but the files are with 25KB (before they were between 100 to 200 bytes).
Details: Photoshop CS6 version 13.1.2
in the "Workflow Options" of Camera Raw there is the option to increase the file size by setting the Crop Size to a greater value then the native of the file itself.
I would like to understand if upsampling with this option can bring advantages (and/or cons) to the image quality, and in that case which ones, in particular for the printing of such files in A3+ and A2.
I need a picture resized (larger). But it is a very small picture and when I resize it, off course, it is not worth looking at anymore... I did capture some of the talking on vector based and pixel based, but how do I adjust the pic so I can resize it?
View 6 Replies View RelatedOne to Five people has the same project loaded into their Project Navigator.
One of the people opens a plot sheet while using the Project Navigator.
ALL computers with that project loaded experience an Autocad 2011 Crash.
-No Error Message appears.
-Autocad shuts down completely with no warning.
-Simultaneously!
This only occurs with DWG files located under the Sheets Tab of the project navigator.
It is not Project specific. This has occured for different users in our office with different projects open. However Autocad only crashes for the users with the specific project accessing the plot sheet loaded.
We recently made the switch from 2009 to 2011. So far this is only a problem for projects where the plotsheets were created in 2009. We can't go back to 2009 to plot since the walls etc have now adapted to 2011.
I'd like to write an article for my blog about increasing the size of the images without getting it blurred or pixelated.
I usually use a combination of facet and despeckle to improve the resolution of the oversized image.
I've also tried a plugin that supposedly resizes the images and worked on a fractal based concept, but to be honest the results were not very convincing.
My cursor will not show the brush size any longer and making changes to my preferences seems to have no effect.
View 1 Replies View RelatedWhen converting the colour of a Jpeg to CMYK in Photoshop CS5 the file size is increasing.
The original image is 352KB and after saving as CMYK it is 2.1MB
Why is this happening and how can I stop it?
I'm using a lot of images for a print project so need to keep file sizes small with resolution of 300dpi. The image dimensions are really small, only about 30mm high so they shouldn't be this large a file size
I am using a clipping path but this doesn't seem to be effecting file size (I checked by saving it as RGB with a clipping path which stayed small, and by saving one without a clipping path in CMYK which was huge)
Where do I set the keyboard shortcut for increasing/decreasing text size in Photoshop CS5? I know it is supposed to be Keyboard shortcuts, but I don't find it in there.
View 4 Replies View RelatedOn one image I used ripple texture to simulate shine on glass and it worked great. On another image, I tried to do the same thing but the texture is a small repeat pattern and doesn't look like glass at all. I tried to get the effect by changing size and hardness and pattern size of the brush but no luck. What should I do?
View 4 Replies View RelatedI'd have thought (since this has been a problem since 9 and that HD displays are fairly common now) it would have been addressed. I still can't find a way to increase the font size in PE 11, though. Am I missing something? It seems the menu fonts have increased in size in proportion to what Windows font size I'm using, but all the other fonts in PE 11 are still too tiny to read meaning (unless I am missing something) the software is still unusable (unless I sacrifice resolution).
View 2 Replies View RelatedHow do I increase the size of blocks I get online?
View 2 Replies View RelatedFilter Distort Luiqify max Brush size is to small. Must use Elements 9 instead. Can you fix it?
View 1 Replies View RelatedI am working on a assembly where a cable wrapped around a drum is animated to rotate with the drum, and there is a longer cable coming off of the rotating cable wrap, this longer piece goes down to another cable on a roller assembly. I have edited the assembly to work without the actual cable drum and without the roller assembly ( I wasnt allowed to share those models ) There are now two cylinders in place of the cable drum, a Grounded center to hold everything in place, a Rotating center which is animated so the wrap can rotate.
My problem is when the part named "Drum to Roller" is a lofted cable with angled ends to meet the "Drum wire wrap" at one end and it meets the "Radius cable ends" at the other end. I need the "Drum to roller" to stay constrained to the "radius cable ends" as well as the "drum wire wrap" ... and after being constrained still animate.
I have set up the animation and you will see that the "Drum wire wrap" is animated to keep the end vertical , the animation is set up to look like the "drum wire wrap' is un-raveling cable and the "drum to roller" is to be what un ravels.
I need to find a way so that the "drum to roller" translates down and over , staying constrained to the "drum wire wrap".. You will see that so far it does not.
I have attached two links below they include the two halfs of my assembly, place all the files in the same folder so you wont have to search for them manually.
[URL]......
[URL].......
I've developed a dynamic block for a standard bulb flat profile cross section using parametric constraints to alter the sizes of the profile. I also made six visibility states for altering the penetration type of the profile through a construction element. It works like a charm on smaller drawings, but on a typical master sectional drawing the file size increases up to 20 or so MB given to the fact that there are over 4000 copies of the block in the one drawing (the dyn block itself is around 100 KB). This makes the drawing almost impossible to work with as you may well imagine. I uploaded the block if you want to take a look at it.
Maybe I'm missing something here because I have searched online for similar problems and found very little occurrences of the same. I tried auditing, -purging, wblock to another file, everything I could find or think of nothing seems to work. Is it just the way it is with files containing so many dynamic blocks or is there a way to make it work.
How can I increase the display size of anchor points? i.e. the vertices.? they are too small to see clearly. i am used to vertice point size of coreldraw.
View 8 Replies View RelatedI find myself in the unfortunate position of having to resize a lot of text by one point size. So I wanted to find the key command for decreasing the text size by 1 point. I found several things online that worked... except they decrease it by TWO points. Not one. They are:
Command Shift <
and
Command Shift .
Both work... except they decrease the font by 2 point sizes. How can I make it go down only ONE point size?
PS I'm using CS4. And I can't select all the text because I need some of it to stay as is... while reducing the size of other text. Oh, and I'm on an iMac.
I am finding when exporting my work in CorelDraw x6 as a JPEG that the size increases to something much larger.
I just want my work as a high quality jpg of 300dpi at the size i have drawn it!
I'd like to be able to vastly increase the size of the triad in the 3D Sketch environment - when sketching the triad is tiny and does not increase in size when zooming, this makes snapping to its planes extremely difficult.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
How can i increase the size of the hose beyond 2" max that Pipe&Run allows it to be? I need the hose more for a visual rather then its acual function. I'm guessing i gonna have to change its paremeters right? if so, how do i and what needs changed?
View 1 Replies View RelatedI just upgraded to GIMP 2.8.4 for Mac after spending months using an older version. At the bottom of the image window are tips for using whatever tool one is currently using. Unfortunately, these tips are TINY! I can barely see them! Is there any way to increase their size via GIMP preferences?
Note that I am not very knowledgeable when it comes to editing program code so if this is required I will need specific step by step instructions.
EDIT: Additionally, I've noticed that image windows always stay behind the toolbox and layer windows. Is there any way to reverse the ordering? (So that image windows can move in front of the toolbox/layer window?) With multiple image windows open on a small screen I need all the space I can get.
I increased my document from 8.5"x11" to 22"x34" and a black line of the original document remains. It is not selectable - the word "x page" appears when my cursor hovers on it. I'm working in C6.
View 4 Replies View RelatedMy Photoshop elements (both 8 and 11) can't find the connected camera for importing pictures.
View 1 Replies View RelatedI noticed it is allowed to install Photoshop Elements on 2 PCs, using just one licence ; of course not using it on both PC at the same time.If I build Albums on PC 1, how do I access the Albums on PC 2.Both PCs are on a unique ethernet network, with shared HDD.
View 3 Replies View RelatedI have elements 5 and a new windows 8 computer. My downloader does not open at all when camera is connected or dows the downloader icon show up at the bottom right as before. If I go into the photoshop menu and click get photos from camera, it says camera is busy or not connected. When I first mentioned my problem someone said to download a certain service patch which I did. All that did was make the icon for the downloader go away and not it will not open at all. Is this all because of windows 8? I had XP before. If the elements 5 will not work on new window 8, then I should just get rid of it.
View 1 Replies View RelatedThe brush size on my paint brush and clone stamp are not working properly.
View 1 Replies View Related