in the "Workflow Options" of Camera Raw there is the option to increase the file size by setting the Crop Size to a greater value then the native of the file itself.
I would like to understand if upsampling with this option can bring advantages (and/or cons) to the image quality, and in that case which ones, in particular for the printing of such files in A3+ and A2.
I've to inseart a color overlay in a 200 icon set.
Till last week the batch tool was working properly to do this action. Since yesterday, when I use the same action the batch works but the files are with 25KB (before they were between 100 to 200 bytes).
Details: Photoshop CS6 version 13.1.2
When converting the colour of a Jpeg to CMYK in Photoshop CS5 the file size is increasing.
The original image is 352KB and after saving as CMYK it is 2.1MB
Why is this happening and how can I stop it?
I'm using a lot of images for a print project so need to keep file sizes small with resolution of 300dpi. The image dimensions are really small, only about 30mm high so they shouldn't be this large a file size
I am using a clipping path but this doesn't seem to be effecting file size (I checked by saving it as RGB with a clipping path which stayed small, and by saving one without a clipping path in CMYK which was huge)
I've developed a dynamic block for a standard bulb flat profile cross section using parametric constraints to alter the sizes of the profile. I also made six visibility states for altering the penetration type of the profile through a construction element. It works like a charm on smaller drawings, but on a typical master sectional drawing the file size increases up to 20 or so MB given to the fact that there are over 4000 copies of the block in the one drawing (the dyn block itself is around 100 KB). This makes the drawing almost impossible to work with as you may well imagine. I uploaded the block if you want to take a look at it.
Maybe I'm missing something here because I have searched online for similar problems and found very little occurrences of the same. I tried auditing, -purging, wblock to another file, everything I could find or think of nothing seems to work. Is it just the way it is with files containing so many dynamic blocks or is there a way to make it work.
When I open my Raw Images in Photoshop CS5 Camera Raw, The file size is correct It was shot at 240 ppi.
But when I open the same Image In Photoshop CS6 Camera Raw 8.1, the Image converts to 300 ppi.
Off course I can go ahead and open the file Inside the Photoshop and change the Image size when Resample Image Is checked and change the Resolution to 240 ppi. But I don't want to do that I want the Camera Raw 8.1 to open all my Raw Images AS IS, which is 240 ppi. Default size for Canon 5D.
I have started to use my new Olympus E-PL1 camera with RAW files.
I was not so pleased with the results in PSE ACR and Lightroom so I have decided to try THE SAME RAW file in Capture One Express and Raw Therapy.
I was shocked to discover that the area covered with Capture One Express and Raw Therapy is larger than ACR and Lightroom - to my astonishment it is like having a wider lens - in all four corners of the image there more details and objects that cannot be seen in ACR! - notice a red car on the right side and a blue boat on the left side - it looks like either from a wider lens or like another file!
I have checked both in Photoshop ACR and Lightroom and the Lens Correction option is turned OFF.
See the attached images
I was fortunate to have a photo selected for a magazine cover. I never expected to use anything from this series so instead of my usual raw/22 MP defalut, I happened to be in jpeg thinking it was just for planning, etc.In any case, the image they like is 5.4 MP jpeg. They claim to need 12 MP minimum to avoid pixlelation.
View 2 Replies View RelatedI usually do photoshop work in an 800 x 600 pixel range. I tried to post a new picture on a website this morning and it came as a 171 x something , tiny little picture that could not be enlarged. How can I increase the size of my pictures? This is my first attempt using the Revel site.
View 2 Replies View RelatedI need a picture resized (larger). But it is a very small picture and when I resize it, off course, it is not worth looking at anymore... I did capture some of the talking on vector based and pixel based, but how do I adjust the pic so I can resize it?
View 6 Replies View RelatedI'd like to write an article for my blog about increasing the size of the images without getting it blurred or pixelated.
I usually use a combination of facet and despeckle to improve the resolution of the oversized image.
I've also tried a plugin that supposedly resizes the images and worked on a fractal based concept, but to be honest the results were not very convincing.
Where do I set the keyboard shortcut for increasing/decreasing text size in Photoshop CS5? I know it is supposed to be Keyboard shortcuts, but I don't find it in there.
View 4 Replies View RelatedMy NEF files ( Nikon 800) is between 50-70 mb. In ACR the workflow option states file size of 36,2 Mb ( default) Is there someting wrong in my set-up
View 1 Replies View RelatedHow do I increase the size of blocks I get online?
View 2 Replies View RelatedPhotoshop Elements. Increasing brush-size crashes Windows 8 when HDMI cable connected to TV or data projector. I'm using Asus N56V notebook with Nvidia 635M dedicated graphics card with latest driver.
View 13 Replies View RelatedHow can I increase the display size of anchor points? i.e. the vertices.? they are too small to see clearly. i am used to vertice point size of coreldraw.
View 8 Replies View RelatedI find myself in the unfortunate position of having to resize a lot of text by one point size. So I wanted to find the key command for decreasing the text size by 1 point. I found several things online that worked... except they decrease it by TWO points. Not one. They are:
Command Shift <
and
Command Shift .
Both work... except they decrease the font by 2 point sizes. How can I make it go down only ONE point size?
PS I'm using CS4. And I can't select all the text because I need some of it to stay as is... while reducing the size of other text. Oh, and I'm on an iMac.
I am finding when exporting my work in CorelDraw x6 as a JPEG that the size increases to something much larger.
I just want my work as a high quality jpg of 300dpi at the size i have drawn it!
I'd like to be able to vastly increase the size of the triad in the 3D Sketch environment - when sketching the triad is tiny and does not increase in size when zooming, this makes snapping to its planes extremely difficult.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
How can i increase the size of the hose beyond 2" max that Pipe&Run allows it to be? I need the hose more for a visual rather then its acual function. I'm guessing i gonna have to change its paremeters right? if so, how do i and what needs changed?
View 1 Replies View RelatedI just upgraded to GIMP 2.8.4 for Mac after spending months using an older version. At the bottom of the image window are tips for using whatever tool one is currently using. Unfortunately, these tips are TINY! I can barely see them! Is there any way to increase their size via GIMP preferences?
Note that I am not very knowledgeable when it comes to editing program code so if this is required I will need specific step by step instructions.
EDIT: Additionally, I've noticed that image windows always stay behind the toolbox and layer windows. Is there any way to reverse the ordering? (So that image windows can move in front of the toolbox/layer window?) With multiple image windows open on a small screen I need all the space I can get.
I increased my document from 8.5"x11" to 22"x34" and a black line of the original document remains. It is not selectable - the word "x page" appears when my cursor hovers on it. I'm working in C6.
View 4 Replies View RelatedI have a bitmap in PSD format with 300 DPI, 19.0 cm (7.0 ") wide. I need to enlarge this photo to 6.5 m (255") wide and its resolution to keep a minimum 120 DPI.
What better way to enlarge this photo without becoming a huge file (in MB), but keep a good quality when printing?
I have this drawing file that has suddenly been growing larger and larger in size. There has not been enough information added to justify such a large increase:
Capture2.JPG
Can't open file from Nikon D7100 in Camera RAW Plug-In,i have Photoshop CS5 and plugin is upgraded.Format NEF from Nikon D 7100 is not in this plug-in photoshop.
View 2 Replies View RelatedI have been revising some older blocks dating back to 2003 and earlier. What was a file size of 28KB increased to 127KB! In most cases the only change was converting text to an attribute. As a test I took a 2004 file and saved it - with no changes - to another name and the file size increased from 28KB to 124KB!!! That's an increase of over 4.4 times! Many of my 1998 - 2006 files are in the 26KB - 40KB range.
That's a bit much of an increase over several ACAD versions! Is there a way to reduce the file size? I did perform a complete Purge before saving. Have I missed some clever trick?
I am running ACAD Version 2014 with SP-1.
Everything I read says its version 6.4, but when I attempt to run the 6.4 patch I get the message that it does not apply? Has Adobe prevented PSE7 from opening .NEF files from the D5100 (without conversion) in an effort to force paid upgrades to the current PSE version?
View 4 Replies View RelatedI use a bog standard canon A480 for all of my photographs, it's a good little camera and does what i want it to do. My question is this, it is set to give a image of 3648x2736 i want to reprint some photographs of the kids on the beach, what sizes would you recommend for output sizes for printing etc.
View 4 Replies View Relatedis there a function in photoshop cs3 that will reduce the file size of a photo without affecting the physical size of it, i know macromedia fireworks can but thats no help to me unfortunately...
View 1 Replies View RelatedWhy is the image on the screen small the the actual file size. As an example I have an image thats 5.7x5.7 @72DPI. My canvas says 100% but the image on screen is about 3x3.
View 3 Replies View RelatedCan someone please explain to me about file sizes and image dimensions. I have to put together a collage which is 165mm high by 258mm wide. If I click file new and choose default resolution (72) then the file size is ok, if I type in 300 dpi the image becomes huge.
If i chosse 300 dpi then the images I was going to use seem tiny on such a vast workspace - Im confused why does the canvas become so large when changing resolution?
Trying to get an 8x10 print from a digital camera photo on a letter size paper. Reguardless of what we do, the print job only comes up to 8x6.5. How do we get an 8x10???
View 3 Replies View Related