AutoCAD .NET :: Can't Debug Project With 2011
May 17, 2011
I have added reference acdbmgd/acmgd from C:Program FilesAutodeskAutoCAD 2011 with copy local =false I can see from the list the version are 18.0.0.0
But when I start debug the project I got the following error..This project used to work with AutoCAD2010, now just moved to 2011 I can't even start debuging
System.IO.FileLoadException: A procedure imported by 'acmgd, Version=18.0.0.0, Culture=neutral, PublicKeyToken=null' could not be loaded.
File name: 'acmgd, Version=18.0.0.0, Culture=neutral, PublicKeyToken=null' ---> System.Runtime.InteropServices.COMException (0x8007007F): The specified procedure could not be found. (Exception from HRESULT: 0x8007007F) at System.ModuleHandle.ResolveMethod(Int32 methodToken, RuntimeTypeHandle* typeInstArgs, Int32 typeInstCount, RuntimeTypeHandle*
[code]....
When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.
View 6 Replies
ADVERTISEMENT
Nov 15, 2010
One to Five people has the same project loaded into their Project Navigator.
One of the people opens a plot sheet while using the Project Navigator.
ALL computers with that project loaded experience an Autocad 2011 Crash.
-No Error Message appears.
-Autocad shuts down completely with no warning.
-Simultaneously!
This only occurs with DWG files located under the Sheets Tab of the project navigator.
It is not Project specific. This has occured for different users in our office with different projects open. However Autocad only crashes for the users with the specific project accessing the plot sheet loaded.
We recently made the switch from 2009 to 2011. So far this is only a problem for projects where the plotsheets were created in 2009. We can't go back to 2009 to plot since the walls etc have now adapted to 2011.
View 6 Replies
View Related
Oct 15, 2012
I am writing a program in vb.net.I have a command.
<CommandMethod("att2att")> _
Public Sub att2att()
Dim ed As Editor
ed = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor
ed.WriteMessage(String.Format("{0} commande: att2att, maintenant disponible...", System.Environment.NewLine))
Dim start As New FileSelect
start.ShowDialog()
End Sub
In the debug mode, the att2att is not recognize.If I compile, netload and call the command, it works. Why is the command not recognize in debug mode?
View 4 Replies
View Related
May 10, 2011
I am using VB.NET 2010 Express, and have created a dll that only appears to load correctly when launching the debugger. When I use netload to load my dll I get an error stating:
"Cannot load assembly. Error details: System.IO.FileLoadException: Could not load file or assembly...
...System.NotSupportedException: An attempt was made to load an assembly from a network location which would have caused the assembly to be sandboxed in previous versions of the .NET Framework..."
The error pops even if I move the dll to the local acad support folder. I have already changed the target framework to ".NET Framework 4" since I am modifying this from a file that loaded correctly in 2011 with 3.5.
View 2 Replies
View Related
Nov 16, 2012
why this stopped working, but when I used to pick the green arrow (Debug) to test my code, it would automatically create the .dll in the Debug folder. For this one program, it has stopped doing that. I have to build the .dll and then use that one (from the Release folder).
I've compared the properties from this program to my other programs, but couldn't find anything that stuck out to me.
what I should look into to correct this issue and have it start saving the .dll in the Debug folder again?
View 2 Replies
View Related
Mar 11, 2013
I was trying to do the cmd+shift+option+fn+F12 to calculate the area on an object and nothing happens..so i was reading on the Internet that adobe dropped this feature no longer exists is this true?
View 6 Replies
View Related
Apr 3, 2012
Is there any way to put the 2011 topobase and the 2011 ArcGIS plugin into 2012 or 2013? Seems such a shame just to lost all of that functionality.
View 2 Replies
View Related
Mar 15, 2013
why photoshop would just crash in the middle of working or using tool or making a selection. It just stops and has an option to debug or close program and loses what you worked on since the last save and you have to restart the program.
View 2 Replies
View Related
May 20, 2009
I am using Adobe Photoshop CS4 Extended Student Edition. My computer is Windows XPI continue to get the error Photoshop exe Aplication ErrorInstructions at oxofa92c5b sometimes is states oxofc42c5breference memory oxoooooo28 Memory could not be read Cancel or debug. it shuts down. no matter what you click. It does this after I get the picture open and when I click on different tools. This is newly installed on my computer and newly bought program.
View 9 Replies
View Related
Jun 28, 2013
I've got a script that creates a palette that does some calculations when a button is pressed - but something in the script is failing silently. (this question is about how to debug things like this, not what the problem is in my specific script)
I've read the debugging tips in the Javascript tools guide, and based on that, re-opened the script in the Extendscript Toolkit instead of my usual text editor, chosen Illustrator, and hit the green 'Go' button. But, either I've missed something fundamental, or this isn't designed for palettes - the script runs in Illustrator, successfully pops up the palette, considers the job done, pats itself on the back, and closes the palette before I can begin debugging the button.
I'm looking for something where I can test the palette doing regular Illustrator work and see debug messages, set breakpoints, etc. I've tried the old-school approach of just filling the code with 'alert("blah")'s but it doesn't work - my code reaches an
" if(app.activeDocument.selection.length){ alert(1);} else {alert(2);} "
and doesn't alert either of them, or give any error message.
If I was working in a browser, I'd just plonk in a "console.log( app.activeDocument.selection )" and browse the object structure to see what's going on, is there any Illustrator equivalent?
View 1 Replies
View Related
Dec 6, 2011
I have a Project Template that is used when creating a new project. I noticed that the Tool Palette in the Project Template and the Tool Palette in the new Project are not the same. How do I get the new Projects to pull the same Tool Palettes from the Project Template?
View 2 Replies
View Related
May 14, 2012
How can I change the way the Project Browser maps the creation of new projects?
Currently, the new project folder is created and named according to the Project Name prompt. We want the folder to be named according to the Project Number prompt...
View 3 Replies
View Related
May 6, 2013
Is it possible to assign a project number to a project file and have it fill in the project Iproerties field?
View 2 Replies
View Related
Jul 17, 2013
I have to set up a project in Navigator so we can get started on it but I will have to go back and change the project number when we get it.
My question is how do I change the project no so that it re paths everything and reorganizes itself numerically in Windows Explorer...or should I just create a new project in Navigator and copy the files I need into the new project?
View 2 Replies
View Related
Dec 12, 2011
I do not have vault installed and I am trying to add sub files to my project. As of now my project has to find many of my files and I do not want to copy and past them into my project folder as this will mess with my parts numbering system. I want only one part / assembly file per part. I assume that you can do this with the project dialog box or some other system tool I just can not seem to figure it out.
View 1 Replies
View Related
Aug 22, 2011
I've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
View 7 Replies
View Related
Mar 12, 2012
I'm having issues with importing an image I created in photoshop that has a background transparency into another photoshop project. The part of the image that should be invisible, is not.
View 5 Replies
View Related
Sep 9, 2011
I used railing tools and created railing in the project files. i want to change rail and Baluster.i created metric baluster and rail from family and saved in the local drive. i used in to my project also it is working fine.
i want to use this railing to some other project. how to get it either copy past or revit link or any other way because the railing created in project file.
View 1 Replies
View Related
Jan 13, 2014
I want to take a sequence that I had in an old project and put it into a current project, but I dont want it to be one rendered file... i still want too see the fades and make changes to it...
View 5 Replies
View Related
Jan 2, 2014
i´m having a problem opening a premiere pro cs6 project from another computer. My partner can open the project in her computer, but when she sends me the project by mail and i try to open it in my computer i I get t the mesasage " Cannot load project". I´ve tried importing the project into another project but it doesn´t work.
View 2 Replies
View Related
Sep 6, 2011
I have a user who installed Map 3D 2011. We originally had some install issues, but a clean install and update to .NET framework 4.0 has seemed to finally be able to allow us to install the software. During installation the AV software was deactivated. User has full admin rights. Now when he double clicks the icon to launch the software he's receiving an error dialog box that is titled "Exception in acmgd.dll ARX Command". The only way he can get it to run correctly is to right click on the icon and select "Run As Administrator".
View 2 Replies
View Related
Jul 22, 2012
I tried to call COM object created by C# from other C# module.
I did:
1. Create simple COM object by C#
2. Register it
3. Try to call this COM from other C# console application - it works fine
4. Create simple AutoCad module by C# with IExtensionApplication
5. Try to call this module from AutoCAD - it works
6. In Initialize() method I wrote:
Type myClassAdapterType = Type.GetTypeFromProgID("CoreAdapter.CoreAdapterClass");
acDoc.Editor.WriteMessage("Type is OK: {0}", myClassAdapterType.FullName);
object myClassAdapterInstance = Activator.CreateInstance(myClassAdapterType);
acDoc.Editor.WriteMessage("Created");
6. Open AutoCAD again
7. Load my module
8. I saw "Type is OK" (becase it was registered in registry)
But I can't create instance.
View 1 Replies
View Related
Mar 18, 2013
Is there any way to import SAT or STP files into AutoCAD LT2011?
View 2 Replies
View Related
Sep 14, 2011
I've got a .PDF of a survey attached (not overlayed) to my site plan construct...on a printable layer. In my sheet it shows up. When I print preview it's there. When it comes out of the plotter it's not there. If I print the PDF by itself through Acrobat it prints fine. Is there a bug here?
View 2 Replies
View Related
Nov 28, 2011
When I try to install on my new computer I just keep getting a dialogue box that says "You cannot install this product on the current operating system". I purchassed Autocad in about January 2011 and have a valid licence. The setup program gives me no other options. I just downloaded the program files rather than buy a hard copy.
View 8 Replies
View Related
May 15, 2012
We are geographically spread out and need to come up with a way to have all Civil 3D files locally available to each office. There is a way to replicate the files to every office. Has tried DFS?
View 1 Replies
View Related
Mar 8, 2011
Does IntersectWith work with 2011? If not what is the fix? Apparently I cannot find the apparent intersection point of two lines.
If I try to use IntersectWith, I get an error that it is obsolete.
View 3 Replies
View Related
Sep 14, 2012
i lost the media CD of the AutoCAD LT 2011, while i am trying to reinstall the AutoCAD LT software in my laptop unable to do so as the AutoDesk site doesnt have a link to download LT 2011, it has only the LT 2013 now.
where i can download the Lt 2011, i have the serial no and other details with me.
View 1 Replies
View Related
Apr 9, 2011
One of the things about Mtext that I really like is to dynamically adjust the text box size. I don't seem to be able to do this when using the multileader with the Mtext. The Mtext when selected with the Multileader acts like the single line text where I have to manually insert returns.
View 9 Replies
View Related
Jul 20, 2011
I can't plot PDF on AA 2011.
View 3 Replies
View Related
Oct 15, 2012
I downloaded the installer for AutoCAD 2012 and when I went to install it, it told me I can't because there are already AutoCAD applications on my mac. So I ran the uninstaller for 2011, and it's still giving me the same message.
View 2 Replies
View Related
