VideoStudio :: X3 - AVCHD 1920 Output Stutters And Stops Playing
Feb 6, 2010
I just installed VS X3 and I'm very impressed with the improved AVCHD editing capabilities. Unfortunately, I'm having a problem with the output. When I import a single AVCHD 1920 clip from my Canon HF100 to my VS X3 project, perform a simple trimming operation, and then save back to the same format as the original clip (no re-rendering), the output file is virtually unplayable. It will usually start playing okay, but after 5-10 seconds start stuttering and even stop playing altogether for 10-15 seconds at a time. I've tried several different players. This problem affects ONLY the output from VS X3. The original footage in the same format plays just fine in any player.
I reverted back to VS X2, tried the same operation with the same clip, and the output is just fine. This must not be a widespread problem, because I searched the forum briefly and couldn't find similar reports. I can continue using VS X2 for the time being, but I really wish I could take advantage of the editing improvements in X3.
View 14 Replies
ADVERTISEMENT
Dec 13, 2013
I have two compositions on a page and I identify them within the AdobeEdge.bootstrapCallback. As soon as the user scrolls to the first animation I want to start it with an external call (compId.play()). If this is the only composition on the page it does work correctly. But as soon as the second one is added to the page it doesn't play at all. If I trigger the first animation via the console (e.g. compId.play(1000)) the animation jumps to the 1000 ms mark but then it stops immediately and doesn't play on.
View 4 Replies
View Related
May 4, 2012
I want to change a 1920-1080 p background, into a 1920 - 1200 background.
I don't want to re-size it or lose image quality, the background for this can be easily replicated through some simple editing (drawing strait lines with the paint brush tool, and basically filling in to expand the background) Is there a way to do this? Here is the picture I want to change:
[URL].....
I just want it so that the pin-wheel design extends outward as to make the entire image 1920-1200, rather then the 1920-1080 it is now. (without losing image quality of the center wheel.)
View 3 Replies
View Related
Sep 25, 2011
A problem with recording narration has just started with my Pro X4. On playback the recording is not complete and the nearest description is that it is stuttering. I have tried recording several different phrases in different parts of the video and using two different mics but each time get this stuttering.
View 2 Replies
View Related
Sep 20, 2011
I just bought Video Studio Pro x4
Now I am trying to render a clip which is mpeg 2 format to wmv, it does that no problem, but on the play back it seems to sutter a lot,
no i need to decrease the frame rate or what?
View 1 Replies
View Related
Jul 19, 2012
I bought the new Olympus TG-1 camera, and want to edit movies that I shoot so I downloaded trial of latest Video Studio Pro X5 to try it out. But I'm not satisfied with the quality of the rendered file. The result is not smooth. For example, I shot a short movie clip out of the window of a slow moving train. When I play the original file everything is nice and smooth, but when I import the file to Video Studio and render it (without doing anything to it, no effects or anything) the result is a stuttering movie - kind of like some frames are missing, or maybe duplicated... (Sound is just as it should, no problem there.)
Source file is .MOV (quick time) 24bits 1920x1080, 29.970 frames/sec according to file properties in Video Studio. Using GSpot i get the following: codec avc1, name H.264, 19641 kbps, 29.971 frames/sec
I've tried every format under "create video file" in Video Studio but the result is the same every time no matter what I do, although the option "Same as first video clip" is not available (it's dimmed when using clip shot with this camera). My system is PAL and I know that 29.97 fps is not PAL standard, but I also tried rendering custom format where the result was a 720x576 clip with 29.971fps (but kpbs is only 1024) but still the same stuttering movie.
View 3 Replies
View Related
Apr 10, 2012
I just installed VideoStudio Pro x5. After creating a few clips, I go to play the project and the preview video image studders, and plays a clip here and there, but my music plays smooth.
I have all the hardware acceleration box's checked ( there's 3 of them ). I don't know what to do, I read this is the least demanding video editing program. I also meed the minimum system requirements?
View 7 Replies
View Related
Aug 28, 2013
When I play video clips back in the playback window, they shake and stutter and give an "after-effect" look to each clip. Looks like mouse trails if you select that in your setup. I am running the program in Windows 8 64 bit, if that matters, but don 't see why it should. When I play the clips in Windows Media player, just to check to see if it is the clips, none of this behavior occurs. Never ran into this one before and I have been with VS since the good old days of version 4.
I rendered a few clips that were doing that into the final MPG format I want and the shakiness is not there once rendered. It can only mean that I have something ticked or un-ticked in my setup of VS Pro 16 Ultimate. It makes it difficult to stitch together the final clips with pinpoint accuracy.
View 14 Replies
View Related
Nov 20, 2012
I have started a new video project with a resolution of 1920 x 1080 in Photoshop CS6with a pixel aspect ratio set to square.. In the project I add a video to the timeline. The source video was created in QuickTime and exported at a 1920 x 1080 resolution MOV file. I have check both the source clip at the canvas siye and have confirmed that both are 1920 x 1080. However, when I import the video it takes up less than the entire frame. It appears that the video is being scaled down so that there is some white space to the right and below the video clip. See the image below.
In the past I have been able to import 1920x1080 video to a 1920x1080 project without a problem. I have 4 or 5 examples that have worked well.
View 5 Replies
View Related
Nov 1, 2011
When I'm working on a project, "Corel needs to close" when I play the supplied .mpa (sound effect) files whether it be as a clip or in the project. I've downloaded the X4 update.
View 4 Replies
View Related
Nov 6, 2012
I've a professional Panasonic camera capable of 720p and 1080p AVCHD recording both at 50 or 25 frames per sec (PAL). My recent clips are AVCHD h.264 50fps @ 24000-26000kbps. I usually render the file to film first, then create a disc after. I use VSP x5
For a short edited film (less than 5gb), I'm happy to make an AVCHD full-HD disc and enjoy a seamless and lossless transfer from project to a standard disc. The picture quality seems true to the original recording.
Q1) For longer films where I need to use a Blu Ray, what exactly is the best route to take and what boxes should be (or not) checked?? I did create a Blu Ray disc using the largest output 35000kbps max and I thought afterwards the footage looked a bit "contrasty" and second hand.
Q2) I've read in the forums that 50fps for 1080p Blu Ray is not available yet (hence the conversion to 25fps). Is it available at 720P and what/where are the settings?
Q3) If I know before filming that I'll be needing a Blu Ray, is it advisable to shoot the original at 25fps to avoid deterioration at render stage?
Q4) For downsizing to 720x576 Standard Definition discs, do I need smart render on? Two pass encode? for best quality?
Bottom line = I want to avoid my footage being unnecassarily hauled through rendering hoops and the final AVCHD or Blu Ray to be as best it can.
View 14 Replies
View Related
Aug 13, 2012
I have created 2 Bluray discs with Video Studio X5 using clips from my HS700 Panasonic. The clips are high quality HD 1920x1080 AVCHD and import into VS as .mts files. I have created two discs and menus and burned them successfully and at the same time used the function that enables a file version to be stored. The discs play beautifully with menus working well on my Samsung Bluray player and TV and also in my PC drive E using WIN DVD Pro 11 (trial version).
My problem is when I try to play the VSX5 created file on C drive, with WIN DVD Pro 11, if I select the BDMV file it says "media not supported" and if I select the STREAM file it plays the files in the order that VSX5 created them, therefore playing the file 0000.m2ts first and onward to the last. In this case there were 4 AVCHD 1920x1080 h264 files rendered to video files and onto the disc and PC file with menus, therefore VSX5 created 18 .m2ts files in the stream file, 4 video files numbered 0000,0001,0002, 0003 and 14 menu files 0004, through to 0018, all of these .m2ts.
WinDVD Pro 11 plays the stream file as a Playlist in strict numerical order therefore playing the menu files last and not as a selectable thing.I guess my big questions are.1) Am I doing something incorrectly OR 2) Does WIN DVD Pro 11 ever play a Corel VSX5 created PC file as a menu selectable Bluray file like it does with a disc?I am running Windows 7-64 Professional with two 1TB hard drives, I have tried the files on either hard drive without success in playing as I expect (like a disc).
To go back a bit, I have a library of DVD VS created files and play through the Windows Media Centre, however with the Bluray ones it tells me I need to have a Bluray Player, hence my downloading the trial WINDVD Pro 11. The old DVD files had a TS file which contained the files necessary to play the video with menu, but there does not seem to be an equivalent in the Bluray folder.
View 4 Replies
View Related
Jan 2, 2013
i was work on some project and it's was going well and everything was just fine but then i've saved it and close the program (went to watch tv). after few minutes i've opend the program again but then the sound didnt play with "project" but only when i play the clip alone or in edit sound mode. * when i'm playing the project on "audio" instead of "thumbnail" it's working fine...
i'm using X5
ii've record some of my screen in here: [URL]
View 1 Replies
View Related
Nov 11, 2013
I am working on creating a project and it all goes well when I have it in the edit tab. I am able to listen to the audio and watch the video.
When I hit the Share Tab and watch it the audio disappears and I can't hear anything anymore but can still see the picture.
I have split the audio from the video to see if this corrects the problem and it doesn't. I know my microphone is picking up the audio or I wouldn't be able to hear it in the edit tab. I have made several videos before using the program and have never encountered this before.
View 3 Replies
View Related
Sep 24, 2011
I'm using Corel VideoStudio X4. I'm facing problem that there is no any audio for any type of video playing. AVI, MP4.. any type of file I play, no audio plays.. All files are checked & plays correctly in any video player, GOM, VLC player etc...
No problem with video files. there is no audio for sample files provided by corel itself. When I play mp3 like audio files, sound plays perfectly. But some problem with video files only... I edited one file but no audio for that file also when I play edited clip in video player like VLC.
PC Configuration:
Windows 7 Ultimate.
HP DV6 laptop. 1GB graphic card, i5 2nd Gen.
View 14 Replies
View Related
Jun 12, 2012
VS X5 Pro wont render clips totalling more than 6 plus minutes......Gives me one of these 2 errors >frame 724 unreadable, frame 1024
unreadable. I click on OK and poof! everything is gone!!
View 12 Replies
View Related
May 29, 2012
whether Video Studio could handle the video file format from a high end Panasonic prosumer camcorder. It seems the question I should have asked is whether Video Studio X5 can edit and export files in the new AVCHD 2.0 format, which is used not only by Panasonic but by other camcorder manufacturers and which, according to an email from a reviewer for camcorderinfo.com is not compatible with a large number of video editing software programs. Can X5 handle AVCHD 2.0?
View 9 Replies
View Related
Nov 10, 2010
I need to convert AVCHD footage to 1280x720 MOV (qt) files. VSX2 via create a video file, and VSX3 can do this via video file creation and batch conversion as well. The problemis that I can't find any setting to get the bitrate of the MOV files under contol. VSX2 generates files with very high bitrates, VSX3 with low bitrate, and when I select "check data rate" in the advanced options settings for the MOV file, I get a prompt at every new file start (and I have many files) like " the bitrate exeeds the settings...do you want to continiue" .
View 10 Replies
View Related
Mar 15, 2013
I have VideoStudio X5.I have saved my completed video as a video .m2t file and as an AVCHD file neither of which will replay on the computer if I click on the file folder. If I copy them to a USB stick they don't replay on the HD tv either. Both play as discs on my laptop quite happily but how do I transfer them as videos to a USB
View 14 Replies
View Related
Jun 17, 2013
I am a amateur editor and do the basic stuff with the editing like color fixing and cropping/cutting. Since the time, i switched to HD videos the video does not render and playback smoothly in preview mode.
However in other editing programs like Vegas it plays back like butter but i am not into Vegas and i dont like vegas. I use Videostudio only.
the video plays back like in 1FPS or like 2-3FPS i mean the videos one picture is shown then directly after 2-3 seconds. The audio is howver smooth.
I have a Duo Core 2ghz Intel Processer,
View 9 Replies
View Related
Jan 25, 2011
I have few avi video clips which I believe I imported from camcorder using windows moviemaker. When I play those clips in any media player they play fine.
I have latest Corel Video Studio Pro X3. When I import this videos into timeline and play clips sound plays fine but when I play the project there is no audio. Even if I render it there is no sound.
View 5 Replies
View Related
Jan 5, 2013
When I am editing clips and play them, the first second plays, then the vision freezes. The control bar continues across the program and the sound continues, only the picture freezes. Thus I can't judge where to cut.
This is a new computer:
Windows 8 Pro X64,
Gigabyte EP45 DS3 M'board,
2.85 Intel Quad core with
2GB Hard drive,
8GB RAM,
VidStudio X5.
The video was taken on my Canon XA10 HD camcorder. HD footage internally copied to Standard Play on 32GB SanDisk Extreme card and input to computer via card reader and USB2 (front of computer).
On my old Win7 computer I had some problem with jerkiness in the final product, but it was tolerable.
This however, is not.
I have downloaded X5 Patch 1.
Video is MPEG2,
24 bits, 720 x 576, 25fps, variable frame rate.
PAL system
View 4 Replies
View Related
Jul 1, 2012
The movie clips in my "project" are not playing the audio. Yes, volume is on and I have ensured that the volume is all the way up and that the "mute" option has not been selected. Screen cap is attached of the video tab.
When I click on the individual "clip" the sound works no problem. The other audio files are also working no problem.
I should mention that the original file was an IFO file from a Sony Handicam that I converted to AVI which I dragged into the program.
why the clips are not playing the audio?
View 2 Replies
View Related
Nov 15, 2013
I have come across - the 1st time - a series of mpg video clips which, assembled into a project file on a 3rd party usb memory stick, irregularly freezes the preview image and sound while playing, usually in the 1st or 2nd clip in the file. Searching for a reason, I have played the file on two machines across both usb2 and usb3 connections, and using different versions of VS, and the freezing of the play occurs in all of them. At different places in successive events. The same thing happens with individual clips in VS, and individual clips in other video player software like media player and VLC.
I've no reason to believe that the software or even the files are causing this. At least, not yet. The only common element seemed to be the memory stick, so I copied the files from the 3rd party item to one I know is usb3, opened the project file and after re-linking, played it. Same thing happened in the 3rd clip. The results to date suggest that the player software (any of them) in doing the background data load from the memory stick at some point is taking too long, and thus the freeze. Which led me to review the file formats and size.
The freezing files are interesting - mpg format, but way bigger than I had expected for the duration involved. For example, one of the freezing ones is 1min18sec duration and 99,791Kb in size. Compared to a 51sec 22,224Kb file taken on a different camcorder. The duration versus size differences are substantial (for only a 27 sec duration difference the size difference is nearly 5 times), and one wonders why? Both of them loaded into VS show as MPEG-1 format on a right click properties display.
As far as I am aware, mpeg-1 is the same as avi format, and mpeg-2 and mpeg-4 are compressed and thus smaller versions of the same file length without loss of quality. Why mpg file should freeze during play in VS X6, X5, media player and VLC, on a desktop and a separate laptop machine?
View 14 Replies
View Related
Jan 2, 2013
I am using VS Pro X2 - I have 3 small MP4 files in my project timeline (filmed on my mobile phone) and for some reason although they play fine on the clip, the audio doesn't come out on the Project, or on the finished DVD, which is a real pain...I have 94 minutes of good quality DVD and 45 seconds of silence! If there was no audio at all I could understand it, but the MP4 clips all play fine on the "clip"...it''s just that when I play them under the 'Project', there is no audio.
My original DV files (which are all ok) are MPEG Audio Layer 2 files - 48000Hz, 16 Bit Stereo - bitrate 224kbps
The MP4 clips are MPEG AAC Audio files - 48000Hz, 16 Bit Stereo - bitrate 113kbps
View 7 Replies
View Related
Mar 29, 2013
I had VisualStudio x5 working fine on my Windows 8 Pro machine. I've been using this for a few months without issue. I imported some video from my phone in .MOV format, and had the message that I needed install quicktime to work with this video. I did so, edited video, and posted it.
However when I then imported video from my Canon camcorder, AVCHD format, I received a crash dump in trying to play any of the clips. What's strange is that I was able to look at old sections of clips I'd saved and play them find. Only the newer clips were an issue. I suspected corrupt files, re-imported things and it didn't work. I even recorded new video and that didn't work. I was up to date on patches from Corel, according to the product.
I was in a bind, so I decided to upgrade to x6, even though none of the features were really important. I upgraded, imported the same videos I'd had issue with in x5 and they worked. Problem solved, or so I thought.
I had to run x5 to access some old clips to put together a short reel. I did that and things worked fine. I then went back to x6 and received crash dumps on all imported files, including the video I had just imported. I can still play the edited pieces of clips I separated out in x6, but I cannot play any full clips.
I've rebooted multiple times, removed quicktime, uninstalled and reinstalled x6, no go.
View 2 Replies
View Related
Feb 6, 2011
when I try to preview my project, I do not get any video. I can hear the audio though. When I preview individual clips I have both audio and video.
View 7 Replies
View Related
Jun 8, 2011
I used a video light in lower light conditions to take an HD video (in AVCHD) which will be rendered to PAL SD DVD. Unfortunately the main speaker has red eye. Can my VSP x3 remove this?
View 2 Replies
View Related
Feb 18, 2011
have a newly acquired Canon HF S21 video camera that captures footage in AVCHD. I plan on using Corel for capture and edit.
My question is for other AVCHD users. Do you use any tools to convert the files to .avi? And then edit those in VS X3 in order to aid the rendering process?
Someone refered me to Cineform Neoscene. It is a bit pricey, but here it is: [URL]
Is AVCHD really a problem in VS x3? If I convert to .avi, will I be able to render to a BD DVD later on and still retain the HD image as good as that on the original AVCHD footage?
View 12 Replies
View Related
Jul 25, 2011
where to get more AVCHD disc menu templates than the 8 that come with it? I was wondering if the demo of DVD MovieFactory 7 has more and if I installed the demo if I could copy the templates over to VSX4.
View 6 Replies
View Related
Dec 7, 2011
why my Corel VideoStudio ProX4 program is having a hard time to run AVCHD MTS files.Seems like they are slowing my computer to a crawl.Causing the program to quite. My computer is a quad core, 3.00 GHz 4g's of ram.Lots of hard drive space.I don't understand it.
View 13 Replies
View Related
