VideoStudio :: X4 - No Audio For Any Video Playing
Sep 24, 2011
I'm using Corel VideoStudio X4. I'm facing problem that there is no any audio for any type of video playing. AVI, MP4.. any type of file I play, no audio plays.. All files are checked & plays correctly in any video player, GOM, VLC player etc...
No problem with video files. there is no audio for sample files provided by corel itself. When I play mp3 like audio files, sound plays perfectly. But some problem with video files only... I edited one file but no audio for that file also when I play edited clip in video player like VLC.
PC Configuration:
Windows 7 Ultimate.
HP DV6 laptop. 1GB graphic card, i5 2nd Gen.
When playing vlideo from a either a DSLR or my Canon XL-1 hear no audio from Photoshop CC.When I first opened the file had audio, but have hot heard a sound since then. Audio is fine using other software
After importing my mp4 video into Premiere Pro, the audio plays perfectly, but the video is out of sync and plays as if though it's in slow motion.I've been using this software for about 4 months and have encountered this problem within the last few weeks.
I started a Premiere Pro CS5 project on my PC at work. Video files played both audio and video, life was good. Unfortunately my PC at work is slow, so I want to continue working on the project on my home PC. Uploaded the needed files with Sugarsync, went home, but when I open the project here all the video files only play audio.
So I know the files CAN display video, so it must be something to do with my home computer and CS5 install? I tried reinstalling PP CS5, no change. Is there a setting I may have accidentally disabled at home to force audio only?
I am working on creating a project and it all goes well when I have it in the edit tab. I am able to listen to the audio and watch the video.
When I hit the Share Tab and watch it the audio disappears and I can't hear anything anymore but can still see the picture.
I have split the audio from the video to see if this corrects the problem and it doesn't. I know my microphone is picking up the audio or I wouldn't be able to hear it in the edit tab. I have made several videos before using the program and have never encountered this before.
I'm using Elements 9.03 with Windows XP. When I download videos from my Sony HandyCam, the video portion of the file does not play back, only audio. Is there a setting I can adjust or do I need to use a more recent version of Windows?
I have few avi video clips which I believe I imported from camcorder using windows moviemaker. When I play those clips in any media player they play fine.
I have latest Corel Video Studio Pro X3. When I import this videos into timeline and play clips sound plays fine but when I play the project there is no audio. Even if I render it there is no sound.
I am using VS Pro X2 - I have 3 small MP4 files in my project timeline (filmed on my mobile phone) and for some reason although they play fine on the clip, the audio doesn't come out on the Project, or on the finished DVD, which is a real pain...I have 94 minutes of good quality DVD and 45 seconds of silence! If there was no audio at all I could understand it, but the MP4 clips all play fine on the "clip"...it''s just that when I play them under the 'Project', there is no audio.
My original DV files (which are all ok) are MPEG Audio Layer 2 files - 48000Hz, 16 Bit Stereo - bitrate 224kbps
The MP4 clips are MPEG AAC Audio files - 48000Hz, 16 Bit Stereo - bitrate 113kbps
I am having a very difficult time trying to figure out what is wrong with my audio in VSPx4.
When I put a video in the timeline and click on it so it is on the "clip" the video plays fine but the minute I switch it to "project" the audio dissappears. If I render it in any format, the audio doesn't return. Also, if I multi-trimm a video I am no longer able to get audio either.
Lastly, if I split the audio from the video I cannot play the project at all. It just gives me a frozen screen...
I have re-installed VSPx4 and have all the patches updated.
I am a amateur editor and do the basic stuff with the editing like color fixing and cropping/cutting. Since the time, i switched to HD videos the video does not render and playback smoothly in preview mode.
However in other editing programs like Vegas it plays back like butter but i am not into Vegas and i dont like vegas. I use Videostudio only.
the video plays back like in 1FPS or like 2-3FPS i mean the videos one picture is shown then directly after 2-3 seconds. The audio is howver smooth.
I had VisualStudio x5 working fine on my Windows 8 Pro machine. I've been using this for a few months without issue. I imported some video from my phone in .MOV format, and had the message that I needed install quicktime to work with this video. I did so, edited video, and posted it.
However when I then imported video from my Canon camcorder, AVCHD format, I received a crash dump in trying to play any of the clips. What's strange is that I was able to look at old sections of clips I'd saved and play them find. Only the newer clips were an issue. I suspected corrupt files, re-imported things and it didn't work. I even recorded new video and that didn't work. I was up to date on patches from Corel, according to the product.
I was in a bind, so I decided to upgrade to x6, even though none of the features were really important. I upgraded, imported the same videos I'd had issue with in x5 and they worked. Problem solved, or so I thought.
I had to run x5 to access some old clips to put together a short reel. I did that and things worked fine. I then went back to x6 and received crash dumps on all imported files, including the video I had just imported. I can still play the edited pieces of clips I separated out in x6, but I cannot play any full clips.
I've rebooted multiple times, removed quicktime, uninstalled and reinstalled x6, no go.
I have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
I have never used any video editing software and I have a Video issue I want to shoot video with a Nikon D3100 DSLR in either 720P or 1080P. The camera produces MOV format (see more at the end of the post). I want to record the audio on a Zoom H4 digital recorder (see more at the end of the post.)
I want to combine the audio from the H4 and the video from the Nikon and have them in sync. The vid is of musicians so I need the video of the musicans hands syncing properly with the music they are playing. This will be shot in a "studio" situation. Not a concert.
I will ask the main quesitons first then give some tech specs on the gear.
1) Can the Corel X3 or X4 video software remove the audio from the MOV file and replace it with either the WAV or MP3 from the Zoom H4?
2) With two different devices recording audio and video, will there will be some differences in sync that have to be corrected?
3) Can Corel make adjustments to the audio speed without changing pitch if I need to do that to sync the audio to the video?
4) The H4 can record in WAV or Mp3 in a variety of bitrates. Forgetting the audio quality, does the WAV or MP3 format make a difference as far as syncing goes?
5) If all of this can be done in Corel does it make a difference if I get the X4 or the less expensive X3 software. At least at this point the only extras I would be adding is a title.
Tech specs on the equipment:
The Nikon D3100 produces HD video in .MOV format using file compression of H.264/MPEG-4 Advanced Video Coding.
Frame Rate is: 1,920 x 1080 (Full HD) 24p (23.976fps) 1,280 x 720 (HD) 30p (29.97fps) 1,280 x 720 (HD) 25p (25fps) 1,280 x 720 (HD) 24p (23.976fps)
The Zoom H4 can record in either WAV or MP3 in a variety of bitrates, including 44.1, 48 and 96kHz.
I am creating video in FLV (custome mode). The only audio compression option is PCM which makes video too big.
How do I add different audio compression codec for FLV video? With other video formats/codecs mpeg-4 I have many moore audio compression options, but not for FLV.
I've edited together some PAL SD video clips, that I copied and pasted from my Sony DCR-SX53ES camcorder, and auto-generated music and when I preview the project through the edit screen everything is okay. I then selected Create Video File and DVD and the output file completed successfully, however, when I play back the file both the original audio from the video clips and the added music are out of sync with the video pictures by about 4 seconds.
This did not happen the previous time I used X4 with the same camcorder and on the same PC, how to correct it.
I just downloaded the VideoStudio X5 Trial, and want to crop a 10-minute video of my baby to the minute she's singing. Her grandparents would love it.
I noticed that when I imported the video into the timeline, the audio was about 0.75s ahead of the video, when in "Project" mode. In "Clip" mode it looked/sounded fine. When I render the video, it also has the same sync problem as in "Project" mode.
Here are the details of the video:
Video type: H.264 Baseline Profile Video Total frames: 18,430 Attributes: 24 bits, 1280 x 720 Frame rate: 29.908 frames/sec Data rate: 11965 Kbps
Audio type: MPEG AAC Audio Total samples: 29,736,960 Attributes: 48000Hz, 16 bit, stereo Bit rate: 96 Kbps
I have been trying to capture both Video and Audio in Video Studio Pro X4. I have a program called Diamond One-Touch Video Capture V500 that uses a USB connection for the Video and Stereo output from my Sony Handycam Digital 8 Model DCR-TRV740. The one touch software works well to capture both the Video and Audio, however, I was hoping when I purchased the Corel Video Studio Pro X4, that I would be able to record both video and audio with the capture feature, since V500 Video shows under sources in the capture screen.why the Video Studio will not record the audio while the One Touch Video program will?
im trying to capture in VS x4 but i only get audio. no video is coming up on my capture screen but if i record, the recording will show video... video just wont show up in the capture screen inside VS x4.. i read where people couldnt see video if they were trying to capture DV and some were told to get windv or someother program to get the video but im not trying to capture dv.. im trying to capture video with my tv capture card, avertv hybrid volar max.. it captures the audio thru the vd x4 capture screen but not the video although if i do a recording both audio and video will play in the mpg.. why cant i see the video in the capture screen?
I'm running VS Pro x4 and I'm trying to import a video that I got from a homemade DVD which was created from a VHS tape. When I import the file to VS, the video is fine, but it thinks there's no audio with it. If I play the file in iTunes, then it has audio.
The video file's specs are as follows:Kind: MPEG-4 video fileSize: 324 MBChannels: Stereo, Dolby Digital 5.1Encoded with: HandBrake 0.9.6Video Dimensions: 634x480Video Codec: H.264What am I doing wrong?
I purchased (USB-Live 2) to convert VHS tapes to DVD. I initially purchased "Ulead VideoStudio 11" to capture and edit video, but the software wouldn't work. I received the following messages: "cannot start the capture graph" or "cannot capture: copy protected material". I was unable to receive a solution from the Hauppauge tech people or the corel tech people, therefore I purchased the Pinnacle studio 12 software and their Dazzle DVC 100 capture device.
Using the "USB-Live 2" device and Pinnacle Studio 12 as my capture software and Ulead VideoStudio 11 to edit and burn, I successfully converted about 100 VHS tapes to DVD disks. Then the Audio would not sync. What happens is that for about 5 minutes the audio will be out of sync, then something happens and the audio will re-sync and stay in sync until the end of the project. But, with the next tape I try to capture the same problem occurs.When in capture mode I can start capture and let it record for about 5 minutes, then, start the tape in the VCR and the audio will be in sync. I wiped the Hard drive and reloaded Windows XP and all of my programs. I also replaced the sound card, but I still have the same problem. I think the problem is with the Hauppauge USB-Live 2 capture device. If I use the Dazzle DV100 there is no sync problem, just a lot of dropped frames.Also, now when I am capturing the video I have no audio but when I edited the project the audio will be on. When I installed the New Sound Card I disabled the onboard HD Audio and it is still disabled.The following are my computer specs.
Asus P5NSLI motherboard Intel Core 2 DUO 2.66GHz 3 GB DDR2 800 MHz Ram Nvidia GeForce GT220 Asus Xonar DG 5.1 Sound Card Hard Drive: 2- 320 Gb drives Monitor: eMachines E2024 WinXP SP3
After i import video files - and try to play them in Video Studio - the video is not smooth (i jitters) and the audio is not in sync with the video.When i play the same video file in windows media player they play well. The Videos are in full HD (.m2ts) format.
I'm trying to capture video from a VHS/DVD machine using an EasyCap (2.0 I think). I'm able to get video but it's pulling the audio from my computer's mic. I investigated settings and found that 1) the format resets to MPEG if I set it on DVD and 2) when I go into Options > Video and Audio Capture... and select the only option in the drop-down for Audio device that says USB, the program crashed. I opened it back up and saw that it was still set on USB for the Audio device, but when testing I didn't get the video's audio. I'm new to capturing video this way, am I missing something? I double checked that the cables are plugged in correctly.
Referring to the sample Visuals and Audio in Video Studio X4, Youtube is a commercial site - so does that mean that I cant use any of the sample sounds and backgrounds in videos I post to Youtube ?? I read a post on this forum about usage rights that was a bit vague stating that sample audio and visuals cannot be used in a commercial environment ?
I use both Corel Video Studio " Cause its time line Rocks "and Sony Vegas Movie Studio " Cause its H.264 for 360P video Rocks, I can use everything that comes with Sony Vegas Movie Studio for private and commercial use. Is the same true for Corel Video Studio ?
The reason I ask is because there is an audio track in Corel Video Studio sample area Named " Mo5.mpa " that I would really like to use in my Youtube video.
Ps if I cannot use the sample Audio Track is there a Royalty free Music area that I can purchase the track for use on Youtube >>>> ?
I just purchased Pro X4 online and the audio and video is choppy when I try to edit the video. I thought it was just my computer, but when I burned a DVD yesterday, it also came out incredibly choppy.
A friend of mine shot some video with his JVC everio on 1/8/11.The native files PLAY fine in VS3 however any attempt to convert to any output video file or just output the audio track (which is what I really want to do) results in random audio "skips" like what happened when an LP had a scratch and a stylus couldn't play it.I have VS SP2 installed along with the audio patch on the Corel site.
I've successfully exported the MOD files to other formats using a freeware program called Video Pad from nchsoftware.com, so I can only assume VS has a problem.
I thought before I downloaded that MOD file converter, that's been discussed here, I would ask.Seems that a PAYware software like VS, shouldn't have this problem.Prior to using MOD files, I used AVI files in VS and exporting to an audio file worked just peachy.
I have read the thread regarding sound breaking up in ProX3. I have this same problem in ProX3 and ProX2. But all of a sudden I am also experiencing the problem of the video and audio being out of sync in files from my Sony Handycam HDR-CX350 set on Standard. The video files I take using either a Sony or Olympus that I mainly use for still shots work fine.
When I first installed ProX2 and then ProX3 my struggle was with the changes in menus and such as I had been using VS11.5 but the videos themselves worked okay. Now all of a sudden I am experiencing the sound problems. I cannot tie the changes in with any specific Win update as I just don't remember the sequence of events.
At one point I had installed a PowerPoint video converter which gave me a registry error message at the time but the sound problems developed much after that time.
Yesterday I downloaded a trial version from another company thinking perhaps I needed to move on but I believe the out of sync problem is worse with that software than with Corel software.
I am wondering if a setting got changed in how the software manages the video from the handycam but I guess I am not smart enought to see what it might be.
when dragging a clip into a project and for some reason half way through the clip, the video goes black but the audio continues?? It's happened a few times for me when the clip is particularly large eg High Def, 4gb, 25mins long (AVCHD). It makes editing impossible because my VSP x3 crashes when I try to play that clip. When I click the edit bar to the good part of the clip, I get the usual "still picture" at that point, but in the faulty segment, I still get a black preview screen for the "still".
Splitting the clip doesn't work so I'm presuming there's a proxy file problem. Anti-virus was switched off and I allowed sufficient time for the clip to move into the project. A real nuisance when trying to preview & edit.
