VideoStudio :: Files Cannot Be Added To Project
Sep 2, 2012
Just installed my free trial for video studio pro 5 and I'm attempting to creat a time-lapse video using 200 jpeg images taken from my dslr camera.After doing the following;
Click File> Insert Media File to Timeline> Insert Photo for time-lapse/strobe and browsing for my images I get the following message "These files cannot be added to this project.
These files may be of unknown format.The computer does not have enough memory Or the file is copyright protected"
Each images is about 750kb in size and are jpegs.I'm using XP home.
View 9 Replies
ADVERTISEMENT
Dec 16, 2010
I would like to add a music file on one track, sound effects like bells, dramatic drums on another. Is this something that I can do with VSP x3? If so where can I find out how it is done? If not is there a way for me to say put special sound effects in back of the main music clip in different places in the timeline?
View 5 Replies
View Related
Aug 22, 2011
I've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
View 7 Replies
View Related
Jul 16, 2011
I have recently 'downsized' to a sanyo xacti vpc-cg100ex camera to lighten my load on holiday! this produces mpeg-4 video files which I copy straight to a folder on my laptop from the SD card.
I can put these into the vs library and tranfer them onto the timeline and add trnsitions, titles etc. however VS is closing down with increasing frequency.(same files on my old xp machine seem to work ok albeit depressingly slowly!)
I have been searching the forum and wonder if I should be converting the files to some other format before doing any editing....does that involve using the share option straight after loading the files, and if so, how?
the properties of the original file are
Type mp4 video,
1920 * 1080,
59 frames/sec, bitrate 252,
audio sample rate 48kh
the properties given for the file on the timeline are
Format Mpeg-4 file,
Vid Type H.264 Main profile video, Upper Field first,
Attributes 24bits 1920*1080 16.9
Frame rate 29.970 frames per s
Audio type MPEG AAC 48000 hz 16 bit stereo
I have not been doing any video at all for quite some time so am definately somewhat rusty.
View 4 Replies
View Related
Jul 22, 2011
I'm looking to import an existing project into another, I want to do this because then I can move the files around and edit them individually rather than creating an .avi and importing that video onto the timeline. Is there such a command?
View 2 Replies
View Related
Dec 22, 2010
I have been using MediaStudio Pro V8 for a long time now and am considering the purchase of VideoStudio X3 to take advantage of the extra and updated featues of a modern editing suite. My question is this, as I am in the middle of editing video footage in MSP8 will I be able to import MediaStudio Pro project files into VideoStudio X3? Also I will be running Win 7 X64 after Xmas so I would be interested to hear if VideoStudio X3 is compatible with Win 7 x64 operating system or if I will encounter problems.
View 5 Replies
View Related
Aug 17, 2012
I wanted to know about the effects of adding a lot of custom images to the Project Material Library and assigning these materials to objects in the project. Does this bring the entire image file, and therefore it's size, into the Revit project file. Can this create a file size and performance issue when fully utilizing many custom material images? I know that Renderings themselves within the project will add to the file but what about assignments.
View 1 Replies
View Related
Aug 12, 2012
Basically, I want to use part/pieces of several project files already created, i.e. to combine the chosen sections into one new project file. Have looked in the Manual and cannot locate the answer! I am now using Prox5.
View 4 Replies
View Related
Aug 13, 2012
crashes in VSX2 (and all previous versions for that matter). At Corel's suggestion I installed the trial version of X5. In the meantime, I had my X2 working a lot better.
But I thought I'd take a look at X5 and see how it looked, since I'd gone to all the trouble of installing it. In order to try it out, I opened some of my projects and played with them a bit. I didn't mean to save them, but apparently I must have because now I can no longer open them in X2. Windows explorer thinks they are X2 project files, but when I try to open them in X2 nothing comes up. Then I try to open them in X5, and sure enough there they are. Project properties confirms they are now X5 project files. I tried to do a save as, but the only options are X5, X4 and X3. No choice for X2.
This is a problem because I haven't decided if I want to buy X5 or not. If I do, fine, but I don't want to be forced into it just so I can work on my old projects. Is there any way to convert them back to a format that X2 will open?
View 4 Replies
View Related
Nov 19, 2012
I just upgraded to Windows 8. All with Videostudio X5 is working fine, except MP3 files will not play in the Library. I get this strange hiss. If I drop the mp 3 file into the time line on any audio track and then play the project it plays fine. Wave files play fine. I did a uninstall and re-install of X5 to see If that would fix the problem.
View 3 Replies
View Related
May 14, 2013
My camera films in AVCHD 1080, 25fps. I currently use VideoStudeo x6. i have been using it for a while and when i export for youtube videos, i find its only quality video when you change the youtube video to HD. Is there a way to set the video, so its still crisp and clear at 360p/480p, as i find its always distorted at these levels, although the footage is amazing in hd. What are the exact project properties i should set and the file export settings.
I am fully aware of the settings for youtube, however is it because iam filming in AVCHd i cant get that clean crisp look at lower levels on youtube? as the best setting for youtube are mpeg files. for reference please check this video i did: [URL]......
View 3 Replies
View Related
Mar 7, 2012
I'm using videostudio 4pro... I find that if I apply pic-in-pic on any video clip I can no longer hear the audio when previewing a clip. I have to choose project to hear audio. To hear the audio I must split the audio track from the video track... is this the only way to preview audio for a clip once I apply pic-in-pic?
View 1 Replies
View Related
Aug 13, 2013
Here is Mediainfo for file that VS X6 nor X5 can handle. It simply dies as soon as the file is placed on the timeline. Any reason this Panasonic GH3 created file can't be used in VS? (60p editing is enabled)
General
Complete name : P1020993.MP4
Format : MPEG-4
Format profile : Base Media / Version 2
Codec ID : mp42
File size : 70.1 MiB
Duration : 21s 21ms
[Code] ......
View 13 Replies
View Related
Dec 12, 2011
I do not have vault installed and I am trying to add sub files to my project. As of now my project has to find many of my files and I do not want to copy and past them into my project folder as this will mess with my parts numbering system. I want only one part / assembly file per part. I assume that you can do this with the project dialog box or some other system tool I just can not seem to figure it out.
View 1 Replies
View Related
Feb 5, 2013
i would like to fade-in a text title.
View 1 Replies
View Related
Nov 29, 2013
Keep getting an error when trying to create the object reference using Excel 2011 and VBA macro. Are added files needed for Photoshop CC?
View 2 Replies
View Related
May 24, 2013
When opening certain JPG images in Photoshop, they look different (worse) than when opened in any other application. They get some kind of additional distortion / artifacts.
If you look closely at the right side of the following screenshot, you will notice that the edges between the color areas are kinda jagged (less smooth) in comparison to the left one. When zooming in, it appears that every second pixel line at the borders of the red areas is distorted in horizontal direction:
left side: image opened with JPEG View, Windows Photo Viewer, Google Chrome or Paint Shop Pro X5 right side: image opened with Photoshop CS6 (also tested on an old CS4 version - same result)
The image retains those distortions when saved from Photoshop. No matter if saved loss less (PNG) or not (JPG). However, when opening the image with an image viewer (i.e. JPEG View), taking a screenshot and pasting it into Photoshop, there are no such artifacts. Even when then saved as JPG and reopened, there is still no distortion.
Therefore the issue must be related to the format the original files are saved in. According to the metadata stored within the JPG the image was edited with "Adobe Lightroom".
You can find the image in question here:
[URL]........
(it happens to other related images from this photo stream too)
View 7 Replies
View Related
Sep 23, 2012
I'm running Paint Shop Pro X. I create a 100x100 pixel JPG using only black and white, then use Alt-L->M->M to collapse down to a single layer, and save the file. When I reload the picture, the black and white are accompanied by several pixels in varying shades of grey. I'm guessing it's trying to apply an anti-alias effect when I load the image but I'm not sure. I've looked through the preferences but haven't found anything. How do I set PSP so it only saves/loads exactly what I created without changing any pixel colors?
View 4 Replies
View Related
Feb 8, 2013
Is there any way to prevent Illustrator from adding numbers to the end of exported files? It's really annoying because I end up with a bunch of extra files and only need the single exported version that I overwrite when making changes to the AI file. It's also annoying when I have an exported file linked in a Premiere or Indesign file. I was last using CS3 wich didn't have this 'feature.'
View 4 Replies
View Related
Mar 11, 2013
Can video files be added to a slide show in Elements 5 or 10?
View 4 Replies
View Related
Jun 19, 2013
I installed Lightroom 4.4 recently. I have been using 2.x for years.
I exported a number of jpg files into a JPG subfolder. These jpgs were generated from cr2 files. The "add to catalog" option was selected. My problem is that not only the exported files/pictures were not added to the catalog but that I cannot add them manually (by syncing the upper-level folder).
View 5 Replies
View Related
Mar 8, 2013
I am deep into my first Inventor project. I am approaching the point where I would like to make a comprehensive set of drawings with bills of material etc. I have discovered that all this time I have actually been working in one big assembly file. My main project file is NOT a project file (so I have discovered). It is a *.iam file.
So, my question is, should I create a project file, and then add my main assembly to it? Should one normally create a new Project file for each new job? What does one gain by doing this versus simply using the *.iam file?
Inventor 2013
View 1 Replies
View Related
Apr 13, 2013
Moved Videostudio X4 from a Win 7 machine to a new Win 8 PC.
Again it seems, audio plays fine when playing a clip from the preview window but not when playing on the timeline. (I had a similar problem with X10 and reported it in an older thread.)
Am searching now for more patches (and yes, I'm aware X6 is now the current version) but nothing obvious at the moment. Have found the SP 1/2/3 downloads on Corel's pages, but as it already upgraded to SP3 just after install, I'm guessing SP 1 and 2 are already covered..
View 1 Replies
View Related
Aug 25, 2011
In the past I've used a Panasonic SDR-S7 video camera which produces MPEG files with no problem.
I now have a Panasonic Lumix still camera which also takes AVCHD video. The individual files play perfectly in VS12, but as soon as I try to play the project to preview it, the picture keeps freezing. I thought this could be due to the new video's being HD but I don't think the individual files could be played either.
View 9 Replies
View Related
Mar 28, 2013
I have been doing this project in X5 and was putting a still picture at the end. When I review the project it stops about a second or so from the end. I thought it was the song, so I took that out.
I changed the picture, did the same thing. I lengthen the time on the picture, it will place and stop about the same time from the end. Doesn't matter how long the picture is playing. If I take the picture out, the video just before it plays fine. I put a picture back in, and it does the same thing? I thought the project time may be set someplace? Doesn't seem to matter because I change the timing on the picture at the end. Stops the same place?
View 14 Replies
View Related
Mar 8, 2012
Certainly couldn't open an X3 in X4. If I wanted to edit/burn my X4 in the "faster" X5, why should I essentially start from scratch to take advantage of X5?
Project would be SAVED as an X5 project file, of course.
View 11 Replies
View Related
Jul 12, 2011
I add a video to the timeline video track (not the overlay track), and with 'clip' selected and playing... I have audio just fine, for the most part... sometimes the audio jumps and skips, and sounds garbled. With 'project' selected and the video playing, either the same thing happens as the 'clip' or there is no audio at all.
What I have discovered, is that this is common with AVI files. Other files, such as WMV, don't seem to have this problem. It affects only AVI files. The video plays just fine in WMP and VLC, as well as other video editors such as PowerDirector... so why dos VideoStudio have this odd sound issue? And I'm sure as Hell not gonna convert all my videos to WMV just to edit them.
This is on a fresh install of VideoStudio Pro X4 (as well as Windows), no updates, no Service Packs, no nothing... even WITH SP1 it's still does it. I've also removed and reinstalled my codec packs (from K-Lite to Shark007) with no difference.
I've also hear that people are now having this issue with VS Pro X3 as well (I have X3 to) so I assume it's pointless to install X3 as well. I really do NOT like using any editing software other than X4, since it's the best one I've used... so I do not want a reason to use something else.
View 5 Replies
View Related
Jul 16, 2008
I've recently upgraded the PC and re-installed VS10 onto the new, improved, beast in front of me now, but have hit a hurdle.
Whether I'm looking at an imported project or starting a new one from scratch, I seem not to be able to get the audio tracks to play when playing the project as a whole.
I can select the music track and play it from within the timeline without a problem, but select the project and all I get is the sound of silence.
after scanning and searching the forum I can't find anything that fits my bill so far.
Drivers have been checked and updated where found wanting. I'm at a loss to explain why. I never had this problem back on the old slow-coach...!
For info I'm running Vista on a dual core 2600Ghz machine with Asus P5K Pro 'board (on-board audio) and a GeForce 8600 GTS graphics card.
View 14 Replies
View Related
Sep 3, 2012
I'm green with Videostudio as i use pinnacle before.
The version I use is X5, I want to make a very good quality photo album with the videostudio, I want to make the blu ray, what do I need to set before I start the project? What resolution should I set and where can I set? someone said the AVCHD is the same as bluray, I don't know!
View 2 Replies
View Related
Jul 29, 2013
I recently upgraded to x6. My question is, there were some hd project templates that came with x3 that id like to use with x6. How to do this, or import or find the files?
View 5 Replies
View Related
Apr 11, 2011
I want to burn my project I have created on VSX4 to a DVD. I don't want to create a menu or add chapters or anything else, I just want to burn my project to the DVD. I have followed the instructions in the user guide to bring my project in to be burnt, but the next button remains greyed out so I can't go to the next step to enable it to be burnt.
View 5 Replies
View Related
