VideoStudio :: X5 Blu-ray Render Stops Half Way
Mar 17, 2012
I upgraded to X5 specifically for m2t 1980x1080 50p rendering but when it reaches between 50%-60% it stops. No error message comes up and the program doesn't shut down, just goes back to the "Share" screen.
I am currently trying to render a 23 minute slideshow containing only JPEGS, no video. After 3 tries using slightly different rendering settings each time, I tried a 13 minute video containing 50p Full HD video and that seemed to render fine. I am using a Toshiba Satellite L500 laptop but as far as i can tell it is within the minimum requirements for X5.
The last settings I used to render mt2 were:
1980x1080 @ 50 fps
PAL HDMV
Quality- 70
Video Format -MPEG-2 (also have tried H.264)
Video Data Rate - Variable 25000kbps
View 14 Replies
ADVERTISEMENT
Apr 5, 2011
VSX4 had a seizure and stopped working. When I contacted a Corel technician he said to uninstall a reinstall the program, which I did and it is working again, but I find all the narration on the first half of the project has disappeared. You can see where it was, but there is nothing there. Why only half the narration disappeared and not the whole lot has got me beat. Is it possible that the missing narration clips are somewhere on the computer and can be retrieved, or are they lost and gone into the great blue yonder and I will have to lay them again?
View 8 Replies
View Related
Mar 28, 2013
I have been doing this project in X5 and was putting a still picture at the end. When I review the project it stops about a second or so from the end. I thought it was the song, so I took that out.
I changed the picture, did the same thing. I lengthen the time on the picture, it will place and stop about the same time from the end. Doesn't matter how long the picture is playing. If I take the picture out, the video just before it plays fine. I put a picture back in, and it does the same thing? I thought the project time may be set someplace? Doesn't seem to matter because I change the timing on the picture at the end. Stops the same place?
View 14 Replies
View Related
Oct 17, 2012
I'm currently using Corel VideoStudio Ultimate Pro X4. Sometimes when I burn a project to DVD it does not play the whole thing. The program says "burn successful" but when I go play it on the tv it stops maybe 10 to 15 mins before it ends.
I thought it might have been the batch of Verbatim DVD-R discs that i use but now I dont think so because i'm using a new batch.
For awhile I started turning my project into an AVI file and then burn it. That actually started to work,....until now.
View 8 Replies
View Related
Feb 8, 2012
Just got on here and love Video Studio x4 with one exception. When I capture video from my DV8 tapes, sony player, it will miss half of the beginning of the capture. This has happened with more than one tape. If I use Windows Live Movie Maker, no problems.
View 2 Replies
View Related
Apr 19, 2013
I just bought VideoStudio Pro x6 from Amazon last night and got to tinkering around with it. I have a MP4 video that I imported in and half way through previewing it, the audio drops. The original plays all the audio fine, but VideoStudio just can't get past a certain point with the audio.
I copied this from my system info. Not sure what's needed:
I am on Windows 7 Ultimate 64 bit (6.1 Build 7601)
Processor i7 CPU 920 @ 2.67GHz
Memory: 6144MB RAM
DirextX 11
View 4 Replies
View Related
Apr 1, 2011
I've tried installing the purchased downloaded version of the software to two different Windows 7 64 machines and installation just stops on the first screen. "Next" never becomes active. Corel told me to delete my temp files and I've done that, to no avail. I had the same thing happen with the trial version and just figured that they would have fixed the for sale version.
Is there a cleaning or prep patch for this one?
View 5 Replies
View Related
May 21, 2012
My video studio pro x5 plays for 2 seconds and then stops in my timeline. This occurs after I've splt and deleted some audio and/or put in a transition. Here are my computer specs:
Brand: Dell Laptop
Processsor Intel(R) Cor (TM) i7 CPU Q820 #1.73GHz 1.73GHz
Ram: 8GB
System Type: 64 Bit Operating System
Pen and Touch: Pen and Touch is available through 80 touch points
View 4 Replies
View Related
Apr 23, 2013
I am using Video StudioPro X4 and rendering a video that is about 15 minutes when it stops at 4% complete, showing the following words: Cannot read audio (0x80004005). Other numbers on the message are: (18300:8000:192). Is there a way to know why it will not continue rendering and/or which audio files to check?
View 3 Replies
View Related
Mar 21, 2011
I am using VideoStudio Pro X3 on my Windows XP Pro machine (see profile for specifics) to capture and edit video from my Canon Elura 100 MiniDV Camcorder. The problem I am having is that VS Pro X3 is stopping the capture during scene changes. It stops both the software and the camera. This does NOT happen on every scene change, but happens at differing times throughout the tape. It requires me to restart the capture from that scene forward. This happens regardless of whether or not I have the 'Split by Scene' option enabled. It is frustrating to have to sit through the entire tape restarting the capture at various scene changes. Previous tapes I have used Windows Movie Maker to capture the video. I have tried WMM to capture these tapes and it does work successfully without stopping at scene transitions. A related question is on Data Rate. The data rate listed under the properties menu in VS Pro X3 is almost 2x for the clips captured with VS Pro X3 vs the same clip captured with WMM while all other attributes are the same (including file size)?
View 4 Replies
View Related
Jun 23, 2012
I have already more than 100 projects running under VS X4 it is problematic to jump to other software, also because of spending 2 years studying Corel VS.I have found now (2 years to late) the top very stable professional software with Edius 6.06.
What happens.... In new installed VS X4 if i put a videofile on the timeline and go to SHARE >MAKING VIDEOFILE MENU....the computer breaks down, and gives the error: " VS X4 does not work anymore..... " and stops working, realy breaking down....
Have tryed it lots of times, it looks like at installing the program, the link to the output formats is not there and VS X4 does not now how to handle.....Yes I am going over to the professional software edius 6, but with a usermanual with 1000 pages i need studying at least one year on that....
View 2 Replies
View Related
Dec 22, 2011
Using VideoStudio X4. I Have a JVC VHS unit which captures video perfectly fine. It's connected via firewire from the JVC unit into a firewire 2 adapter and into the iMac. However I also have a Sony 8mm playerGV - D800E unit which plays back via the preview pain on X4 fine, but as soon as you hit capture, it runs for 9 seconds and stops and it does capture 9 seconds of footage. I've run the Sony unit with other apps and it works fine. Just with X4 I have issues with. Tried switching between DVD (array of differnt setting) and DV (Type1 and 2) but with no luck.
I also tried connecting the Digital Sony 8MM player via a video capture device (Canopus ADVC110), same result. It captures video for 9 seconds, VS stops capturing, and the player continues and play's back on the viewer in VS.
View 1 Replies
View Related
Jun 8, 2011
I am trying to complete my first project in X3 with a new computer. I have done many projects on an older computer with VS 10. I X3 stops working during the rendering process everytime I try to make a video file. I'm making a 4:3 mpeg 2 file (DVD). I have tried several different ways and the most I can get done is 24%. i have tried to cut out a clip..I get a dump file each time that it tells me to send to Corel.
View 5 Replies
View Related
Dec 1, 2012
My HP had win 7 pro issues and then blew its motherboard so i replaced it. I reloaded Video Studio Pro X3 which worked fine until I tried to save the edited video as a mpeg-4 HD (to be converted into an AVI later). It starts saving and then shut downs informing me to contact Corel and give them the data dump to figure out what the problem is. of course, i can not contact Corel who directed me to this forum. I did download and install the critical update but the same error occurs.
View 14 Replies
View Related
May 30, 2012
I have been using Ulead VideoStudio / Corel VideoStudio since the 4SE version and made all upgrades, up to X4.On April 1, 2012, I purchased then the UG from VS X4 Pro to VS X5 Pro and downloaded the software through the link provided by Corel.
I start the installation, enter the S/N of X5 and X4 (because I purchased an upgrade).But installation always stops with an error message at the following step: "Please wait while we configure Microsoft Visual C+++ 2005 Redistributable"
The error message is: "1: ALLUSERS property is not 1 - this MSM cannot be used for a per-user or fallback-to-per-user install".
What I already tried so far...I already uninstalled VS X4 and used the "VS_Cleanup", but the error persists. Meanwhile, I contacted Corel support, and they recommended to uninstall Microsoft Visual C++ and then to re-install it. I followed their instructions and uninstalled all instances of Microsoft Visual C++ and then re-installed the latest version, i.e. Microsoft Visual C++ 2010 SP1 (x64).However, the same problem persists.
Meanwhile, I tried many other approaches: I moved the installation file (.exe file) to the desktop and tried the installation from there, I tried the installation as another user (equally with administrator rights), I tried to install under Windows Safe Mode (this failed, since some necessary drivers or software was apparently not loaded), removed any remaining traces of VS X4 manually and made a registry clean up, etc.Note also that all latest updates of Windows and related software are made.
I also re-downloaded the installation file, in order to make sure there is no problem with a corrupt installation file.
Video standard: PAL/SECAM, manually selected during the installation process.
View 4 Replies
View Related
Oct 24, 2012
Untitled-1 copy.jpg
When the modify dimensions box is open, the 'roundoff' menu gives me 1/16", 1/8" etc, even when DECIMAL is selected as the unit format.
This wasn't happening earlier, not sure what's going on. [in fact in a solved problem from earlier, a colleague found a drawing that had units set to millimeters, had its insertion scale set to inches! Different computer, so not related].
View 3 Replies
View Related
Dec 28, 2012
I have been having a problem with large file being burned onto a DL dvd disc. Eery once in a while when I try to burn the file it will go so far and then stop with a unspecified error 5.0.0 cannot complete. It will work sometimes and at other times it will quit working. I have been using verbatum DVD+R DL disc which have worked but not all the time. It is frustrating throwing away disc because it is getting an error.
View 2 Replies
View Related
Feb 23, 2013
I have created a project and have gotton far into it. All of a sudden on playback it stops in the same spot. I tried deleting the frame ans reinserting the picture but nothing seems to work? On previous playbacks along the project creation it didn't stop. Is this a bug?
View 2 Replies
View Related
May 1, 2008
I am trying to edit a JPEG. It is one layer. My mode is Normal with 100% opacity, 100% fill. The layer is not locked.
I can use several tools including move, magic wand, paint bucket, crop. However, I cannot use the eraser, paintbrush, healing tool, clone stamp (which is the one I desperately need to use) or many others.
View 4 Replies
View Related
Feb 6, 2010
I just installed VS X3 and I'm very impressed with the improved AVCHD editing capabilities. Unfortunately, I'm having a problem with the output. When I import a single AVCHD 1920 clip from my Canon HF100 to my VS X3 project, perform a simple trimming operation, and then save back to the same format as the original clip (no re-rendering), the output file is virtually unplayable. It will usually start playing okay, but after 5-10 seconds start stuttering and even stop playing altogether for 10-15 seconds at a time. I've tried several different players. This problem affects ONLY the output from VS X3. The original footage in the same format plays just fine in any player.
I reverted back to VS X2, tried the same operation with the same clip, and the output is just fine. This must not be a widespread problem, because I searched the forum briefly and couldn't find similar reports. I can continue using VS X2 for the time being, but I really wish I could take advantage of the editing improvements in X3.
View 14 Replies
View Related
Sep 13, 2012
I have WINDOWS 7 on a toughbook and vx4 and I will try to SHARE>CREATE VIDEO FILE> MPEG and it will start to render and get to around 90-99% and then the render box goes away and the files won't be made. This used to happen once in a while and i woul just run it again and it would work, sometimes I would try to render as a different kind of file but now I can't get it to render anything. The box simply disappears after 90%.
View 3 Replies
View Related
Feb 5, 2011
I have WMV 1080p30 source files that I am trying to render to an 5-6min MP4 HD file for upload to Youtube. I am able to make WMV HD files, but wanted to see if MP4 HD files would make a better final outcome on Youtube (Youtube seems to add a lot of jaggies to my WMV uploads). However, whenever I try to render anything to MP4 HD, VSX3 crashes (it never gets past the "Creating files" message). The windows error log states that the faulting modules are kernel32.dll and ntdll.dll. I have QT 7.6 (not the latest) installed. I have XSVX3 updated to SP2 (although the file downoaded was patch3.exe). In the Make Movie template and in Share/Custom , I don't get the option to see/manipulate any MP4 HD formats or even use H.264 compression. When I bring up Mpeg-4, it allows me to use mainly standard-def or non-HD resolutions and on-H.264 codecs. Is it not seeing the profiles/codecs for HD H.264 from Quicktime? Do I need QT Pro or just the free QT? I can render MP4 non-HD. As an aside, I see no sign that CUDA is being utilized.
View 1 Replies
View Related
Oct 4, 2011
If I render a Videostudio-file of 15 minute in .mpeg, it is about 750 000 great, if I render it in .mp4 it grows to 1.200 000, why?
View 5 Replies
View Related
May 14, 2011
I would like to convert my AVI files captured from my dV Sony camera (uses the small digital tapes) into mp4 files to save space on my drive.
I was able to render one AVI file to my hard drive but the next time it crashed and wont let me do it again, no matter what I tried. I also downloaded the latest patch.I did used the enhance mpeg rendering and seemed to work.
What video file format would give me the same video quality as the original AVI captured from my camera?Should I use mp4 or there is a better alternative since keeps crashing the program?
View 9 Replies
View Related
Aug 21, 2011
I just upgraded to x4 from x2. Using x4, if I render to the iphone h.264 640x480 template, rendering seems to complete normally, progress bar goes to 100%, but after that no file is created and no file plays (if autoplay is checked).
I experimented with making a custom h.264 template, and found that this always happens if audio is aac 48000. If I change to 44100, everything works.
But I'd like to be able to use 48000.
View 3 Replies
View Related
Feb 24, 2011
I don't know if I changed a setting or what, but now, when it renders, the CPU is rather idle?! Yet the render speeds are not bad! What?! I bought the product because it said it had GPU rendering. That is great, but I want both! Also, is there a way to see GPU usage like task manager CPU rendering? I would like to maximize utilization to minimize my rendering time. I have an NVidia 460 786MB GPU.
View 3 Replies
View Related
Oct 3, 2011
I have a project I'm trying to render to an mp4...I previously rendered 2 different versions of it, then after this morning when I re-edited and finished the project, it doesn't let me render an mp4.
If I try to render, it goes through the whole process and then I watch as the file disappears when rendering is complete. It let me render to an AVCHD file, but it won't let me render an mp4 from it. I tried uninstalling/reinstalling VS x4 and installing the SP but nothing works.
View 2 Replies
View Related
Jun 19, 2011
It's an element contained in a .vsp. Right now I'm trying to "connect" & render 1 video file + 4 .vsp (inttertitle card.mp4, segment1.vsp, ... segment4.vsp). Each contains segments that run continuously and I need to combine into just one video file (mp4 HD format). But every time the render reaches that file (above) (17% of the total render), it crashes. There's nothing else on that timeline except that mp4 file and a wav file. I don't understand why it's happening. I have done it successfully before in Youtube HD format.
Smart Proxy is enabled, but I don't see how that's relevant to rendering. I have tried re-converting the video file into versions: one has .mpeg4 codec, the other has .H264. I also downloaded & installed VSPX4 SP1, updated my codecs, drivers, downgraded Quick time. But the result is still the same as far as rendering the whole project goes: crashing at 17%.
There were enough RAM & CPU when I did the rendering so I don't think this is a hardware issue. I also tried disabling Smart Render just to see if it will react positively.
There came a time also when the render passed 17%, but it crashed when it reached 94%. Interestingly, when I rendered segment1.vsp only (to mp4 HD), it also passed 17%, but then it failed to finish also. Right now, I'm going to re-convert the file to a different format to see if the whole crash is related to mp4 (I have rendered many mp4s just last week and they were successful).
So I'm curious, is there a limit to how many "connected" .vsp files one can render successfully? And is there a certain mp4 type that VSP can't handle properly?
View 5 Replies
View Related
Jun 20, 2011
I have Video Studio Pro X3. I've never had a problem since I got it, but recently I've been trying to render video at 60 frames per second. I've looked everywhere online for tutorials but still don't understand how to do it. I keep getting 29.97fps in the end. I need it for a project and I need it very soon.I use MP4 video files at 60fps.
View 10 Replies
View Related
May 28, 2011
I am trying to render to DV 4:3 with video studio 4 but the finish video is missing a piece.
Video Studio 4
OS - XP
View 1 Replies
View Related
Nov 21, 2012
After lots of experimenting, I have finally found that Corel Video Studio Pro X4 is capable of rendering the 1080i 50i AVCHD videos off my Sony CX-190E Camcorder, without any motion blur.
All other softwares failed to remove the motion blur. Only this software could render the video, smoothly at 25 FPS (50 FPS isn't supported by my Samsung HDTV so I render at 25FPS)
So I was trying out VS Pro x4 before buying. But the only problem that keeps me away from buying the product is, Corel VS Pro X4 renders the AVCHD (1080i-50i) source files to HDV 1080i -50i (.mpg) files at 1440x1080, which plays vertically elongated (with two black borders on the sides) on my HDTV.
How can I make it render at 1920x1080?
If I select any other profile like WMV (and manually configure the profile at render at 1920x1080), motion blurring is present and noticeable. Only the .mpg HDV 1080i-50i are completely smooth and free from any motion blurring.
How can I make it render HDV 1080i-50i at 1920x1080, instead of 1440x1080?
View 3 Replies
View Related
