I am trying to edit a JPEG. It is one layer. My mode is Normal with 100% opacity, 100% fill. The layer is not locked.
I can use several tools including move, magic wand, paint bucket, crop. However, I cannot use the eraser, paintbrush, healing tool, clone stamp (which is the one I desperately need to use) or many others.
Untitled-1 copy.jpg
When the modify dimensions box is open, the 'roundoff' menu gives me 1/16", 1/8" etc, even when DECIMAL is selected as the unit format.
This wasn't happening earlier, not sure what's going on. [in fact in a solved problem from earlier, a colleague found a drawing that had units set to millimeters, had its insertion scale set to inches! Different computer, so not related].
for a while now, my photoshop tools wouldnt work. it was only the tools that involved "painting" like the brush tool and quick select. after reinstalling, they would work but suddenly they'd stop again. eventually i figured out that it was the pen for my wacom tablet. every time i used the pen, it would make the mouse not work untill i reinstalled the program. this means that a setting changes (pen pressure or something) when i use the pen and it doesnt change back when i use the mouse. i cant deturmine which setting changes.
View 11 Replies View RelatedPSPro X XP Home. The clone brush stopped working, I restored PSPro to its default state. Now I only have about half of a working screen with loads of folders showing below still not being able to use the clone brush.
View 1 Replies View RelatedIm having issues with cs4. When i use a tool (paintbrush, eraser), it randomly applies it somewhere else. For instance when trying to paint precise lines while following and edge the brush will apply itself randomly somewhere else. It always happens when i release the mouse button and then press it to start using again. I could be painting a horizontal line, let off the mouse button, repress it and all of a sudden the brush paints a vertical line 3 inches away!
View 5 Replies View Relatedhow can I make a half circle with a word??
View 3 Replies View Relatedto make and image half transparent, 1/4 transparent and etc.?
Like if the image is totally blue and I make it half transparent, If I put that image in a red background in a site it would appear to be purple. Any way to make a image half transparent on photoshop 6.0?
I was working on Photoshop and wanted to know if there is a way to slice it into two equal halves, left and right.
View 2 Replies View RelatedJust realised that most of my filters have disapeared since trying to update to 14.1.2.  The update has failed several times, and I now get a 'There is a problem with Generator' message every time I start Photoshop.
View 8 Replies View Relatedhow to make a rounded rectangle selection now. But what about a rectangle with only the top-left and top-right corners rounded, and the bottom corners flat 90 degrees.?
View 5 Replies View Relatedi really like the effect of half tone dots but i dont know how to acheive it.
the effect im going for is in this pic.
i assume it a series of filters
I would like to take face pictures and split the faces in half. After that, I would like to use the left side of the face and match it to the reverse left side face together(having 2 left sides which will look like a normal face after the 2 sides will be brought together).
So:
1. picture of a human face (head)
2. slipt the face in half
3. remove the right side
4. highlight the left side and make a reverse image
5. put together the real left side and the reverse left side in one face
How that is possible with Photoshop?
I have PS, AI and ID. Any good place that i can get generating a vector based half tone generator from an image. the idea is that i will mill this out of solid material. ideally i would like to control the size, type (circles, ellipses, squares or whatever) and arrangement of the results.
Â
someone gave me a download of software called "dxf halftone21" but i am not getting this to work.
Can anyone give me step by step instructions on how to make a photo black and white with abit of colour like the one attached... on CS4?
View 1 Replies View RelatedHow in the world do I cut a box in half so I can have 2 objects I tried using the slice tool, but not working.
View 4 Replies View RelatedI've been working on a project, and I created all the elements separately in JPG, gif, etc...
However, when pasting them in the final document, they look even smaller, but they should be only half the size.
How does this site make the half-tone like patterns at the top and bottom?
I can't figure out how to do this with Photoshop CS2.
how can I make a half circle with a word on photoshop?
View 1 Replies View Relatedhow do you get an image to half that "cartoon" look but at the same time realistic?
View 9 Replies View RelatedI am making an image to be screen printed. In the background theres a moon in a very dark sky. The moon is going to be white, with a greenish gradient glow (circle shaped) around it, fading into darkness in the rest of the sky. I have the gradient ready but I can't figure out what to do about making it a half tone so I can screen print it.
I suppose the specifics of my image aren't crucial. What I need to know is how to make a coloured half tone where it's essentially two colours on two separate layers that blend into each other. Should it be two half tone layers? Or is it better to have ONE of the two colours a half tone, while the other sits below and together they create the illusion of blending?
I had to factory restore my computer and reinstalled CS6 and now when I use Photoshop to import videos only half the frame of the video shows up. The top half is completely missing.
Â
I tried uninstalling PS and reinstalling it again but I'm still having this error. It's always worked before, now I'm not sure what to do.
I am printing out several images for relatives in 4x6 size. The prints are only half height (landscape mode).Using Photoshop Elements works okay.I normally print on an Epson r1900 and everything there prints out well.Either automatic or setting to dimensions in the print menu makes no difference.Image size reports correctly.
View 7 Replies View RelatedPhotos filed in My Pictures sometimes get the bottom half degraded. They get an over all green or yellow cast which I cannot get rid of. The pics start off OK but later for no apparent reason this cast appears.
Could it be connected with images that are scanned in? The camera downloads do not seem to be affected but I might be wrong about that.
When I send a photo to the printer, only part of the photo is printed.
View 2 Replies View Relatedusing Elements 11. how I could restore a photograph that has been faded on one half?
View 2 Replies View RelatedIve got Photoshop CS, and none of the hotkeys are working, according to the hotkey settings they're all there and should work.. but none of them do.. not even simple things that should work like cut and paste..
View 1 Replies View RelatedI'm new to 3ds max (and 3d modelling) so am possibly just superimposing my 2D graphics skills onto the 3D realm, but, here's a shot.
I've got a very complex scene, a room with walls, a floor any many objects inside. I want to simply select half of the visible room from a top viewport and simply cut it out (crop). The problem is some of the objects span across the whole room and they get removed completely rendering me with less than half of the room. Is there some function which simply removes the object wholly if it is completely in the selected area, otherwise just partially cut out the section that is selected if the only part of the objects area is selected?
I have a really big gif with way more frames than it needs. How can I cut the frames in half or more?
edit: to clarify. Like removing every other frame.
when i open an image to work on onlyhalf of it is showing. It is as if i need to scroll down to see the whole page. I have the scroll bar visible, but it doenst move. When i try to move the image up the screen it moves out of its box, leaving a checkered background in its place.
I am using gimp 2.8 and run Ubuntu 13.04
How do I cut a page in half.
I have an 11x17 map produced in Illistrator.
I need to cut the page in half, roads, background ect.
I need to make a seperate map out of each half.
This query is with regard to a Wire-removal/Touchup process in dealing with16Bit(half float) EXR files. Here is the process we adopted.
Â
- Opened a 16Bit (Half float) Exr file in Photoshop, which showed it as 32Bit file
- Since the footage has lot of fire/blast elements among which we need to erase a "WIRE", we need to use "Healing Brush" which doesn't work on 32Bit files. When we tried to 'Convert' 32 Bit file to 16Bit file directly, we get a 'Washed Out' problem, since the shot is over exposed due to Fire/Blast elements in it. So here is a pipeline we used.
Â
---- Added "Exposure" (Image > Adjustment > Exposure)
---- Set the "Exposure" to -5 (since it is a over-exposed frame, value -5 depends on exposure values of shots)
---- File > Export > Render Video (OpenExr output)
---- Open the above render file in photoshop
---- Convert to 16bit (Image > mode > 16bit)
---- Use any 16 bit tool for cloning (Eg. Healing tool)
---- Added "Exposure" (Image > Adjustment > Exposure)
---- Set the "Exposure" to +5 (Reversing)
---- Convert to 32bit (Image > Mode > 32Bit)
---- File > Export > Render Video (OpenExr output)
Â
After rendering out, we checked the "original footage" with the "output exr" and apart from the Touch-up (wire removal) portion, all other details remain the same. Since this is a high-end hollywood project, (professionals) confirm whether this process is safe.
Â
During the process we found a bug that this process only works, when we render whole footage, meaning if we try single frame, then there seems to be a slight color difference only in the overexposed area.Â
Â
When we opened the client input EXR file, under Nuke it shows as "16 Bit (Half float)" but the same when opened under photoshop it shows as 32 Bit file.