I've tried installing the purchased downloaded version of the software to two different Windows 7 64 machines and installation just stops on the first screen. "Next" never becomes active. Corel told me to delete my temp files and I've done that, to no avail. I had the same thing happen with the trial version and just figured that they would have fixed the for sale version.
Is there a cleaning or prep patch for this one?
Recently I purchased, got the path to download, and my serial number of VS Pro X4-ultimate.
Before that I had been experiencing with a trial VS Pro X4, and got enthused to upgrade to Ultimate
The download was OK, but during my attempts to install, I got the following message in a pop-up window with the title:
Corel Video Studio Pro X4 Ultimate
------
El sistema no puede hallar el archivo especificado
C:DOCUME~1ADMINI~1CONFIG~1TempCorel VideoStudio ProX4 Ultimate14.0.0.001LangCustomInit.htm
------
Translated: The system cannot find the specified file
After this message I cannot go further
-------------------
NEW: Instead of the error mentioned above, sometimes I receive the following error message: La ruta de archivo de idioma no se pudo encontrar, el programa de instalación no puede continuar Translattion: The path to the language file cannot be found, installation program cannot continue
Just for testing purposes, I tried to install the program on an older notebook with XP Pro service pack 2, and there No Problem, everything went OK, the program installed.
This was to test, I will only use (and hope to do so) the program on my main PC, and delete it from the notebook.
Additional question: Can it be that my windows XP pro, SP 3 installation is corrupt or partially failing for installing this program?
I am using Windows XP Pro - with ServicePack 3, Spanish.
I have been using Ulead VideoStudio / Corel VideoStudio since the 4SE version and made all upgrades, up to X4.On April 1, 2012, I purchased then the UG from VS X4 Pro to VS X5 Pro and downloaded the software through the link provided by Corel.
I start the installation, enter the S/N of X5 and X4 (because I purchased an upgrade).But installation always stops with an error message at the following step: "Please wait while we configure Microsoft Visual C+++ 2005 Redistributable"
The error message is: "1: ALLUSERS property is not 1 - this MSM cannot be used for a per-user or fallback-to-per-user install".
What I already tried so far...I already uninstalled VS X4 and used the "VS_Cleanup", but the error persists. Meanwhile, I contacted Corel support, and they recommended to uninstall Microsoft Visual C++ and then to re-install it. I followed their instructions and uninstalled all instances of Microsoft Visual C++ and then re-installed the latest version, i.e. Microsoft Visual C++ 2010 SP1 (x64).However, the same problem persists.
Meanwhile, I tried many other approaches: I moved the installation file (.exe file) to the desktop and tried the installation from there, I tried the installation as another user (equally with administrator rights), I tried to install under Windows Safe Mode (this failed, since some necessary drivers or software was apparently not loaded), removed any remaining traces of VS X4 manually and made a registry clean up, etc.Note also that all latest updates of Windows and related software are made.
I also re-downloaded the installation file, in order to make sure there is no problem with a corrupt installation file.
Video standard: PAL/SECAM, manually selected during the installation process.
I tried to install Photoshop CS6. I used the Adobe Download Assistant. During first try of installation my battery of the notebook broke down - I accidentally forgot the charger..When I try now again an installation the Download part with the Assistant works fine but during installation the process does not continue anymore after this step ..The "progress-bar" of this dialog completes but after this nothing happens.
I tried this several times.I also tried to clean the registry (Ccleaner) - no success.
My notebook:
Acer Aspire 5920G
Win7 32bit
Photoshop CS6 via Adobe Dowload Assistant
I got a Problem the Installation of Photoshop CC stop at 64 % . But why?
View 3 Replies View RelatedCS4 Trial will not load
I have downloaded the trial version of CS4. When installing the download stops at the Initializing stage with Checking System Profile bar stuck at 90%.
The PC has CS3 and Lightroom installed and both run well. The PC has 500 GB HD and 3 GB of ram I have tried to install with and without the virus checker switched on. I have tried also as Administrator, I have run both Win install clean up and the CS4 Clean Script.
An error occored during the installation of assembly component
{5C21D397-1DA5-3749-8C1F-165D21DE9E3E}
The installation up to that point is reversed. No product is installed.
Downloading the file for a second time does no solve the problem.
Creative cloud dsek top installation stops at the last bit
View 1 Replies View RelatedIf there are any 3D plugins that will work on Pro x6 Ultimate . I've had a look at the VIDEO COPILOT | Element 3D - 3D Object based Particle Plug-in. It lists a lot of programs it will work with but not Corel.
View 1 Replies View RelatedI recently purchased the x5 ultimate pro edition, but a few years ago i had an older version but i noticed something....
the older version used to have close to 40 transitions, but the new one even with the extra download pack still only 3 transitions.. did something not get installed?
I'm having a real problem with VS X4 pro crashing!Ive just started a project I have a video in the toptrack..I've used a instant project the one selected in yellow all seems fine! I move the text from the instant project & select a Title text effect
Preview it all is well! Now change the text from LOREM to Dublin IPSUM to 2012..Change other text & 9 time out of 10 VS4 crashes when i preview the Project.If i don't use the Title text effect it seems fine!I just reinstalled my OS (windows 7 64bit) it will be somthing Ive missed but ???
How long Corel take to send out disc? Im waiting for a VS5 Pro ultimate? i bought VS4 a couple of weeks before they released VS5 & Corel done a deal!
Since downloading the new version I have ran across a display issue. When editing, all of the popup display boxes are too large and extend under my taskbar. I have tried everything such as changing the monitor's screen resolution to nearing every setting. And I have searched and attempted to come up with a fix from with in the preferences, UI layout, etc.
View 1 Replies View RelatedI have prepared a folder using AVCHD for BLU RAY Disc( that is I am not trying to burn Blue Ray from timeline). When I go in share-create disc-pick blue-ray, the program aborts with message 'Program will abort Contact technical support'. No details on error
The file size is less than 6 GB
I am using WIN 8 have 16 GB of ram, Have Blue Ray burner and Quad Core CPU. I have checked and Burner's firmware is up to date Same for Videostudio 15. It has all the updates and patches installed.
I am running Vid Studio Pro X4 and am 3 months into a year long project. I was interested in upgrading to Vid Studio X6 Ultimate but wanted to know if X6 will be able to read and properly load the .vsp file for this project which already has many clips, transitions, effects, and audio. Or, should I just stay with X4 until December when my project is finished and then upgrade starting next year's project fresh.
View 2 Replies View RelatedI have done all the updates etc that Corel has suggested and I still cannot make a 3D movie. I do all the steps to make it and when I play it back the audio is there but there is either a white or black screen.
View 5 Replies View RelatedMy new Pro X6 doesn't show me the Smart Sounds. You can't klick something in the smartsound window! I also have installed Pro X4, and here I have all smartsounds!
View 10 Replies View RelatedI have installed the Corel Video Studio Pro X6 Ultimate. I installed the plugins, but they are not showing up in my effects at all.
View 2 Replies View RelatedI've been a Corel Video Studio user for almost 10 years and never ran into this issue. When creating a disc (DVD or Blu Ray), I get an error message while the program is "converting the menues" for burning to blank disc. The message reads "convert step got some problems (257.0.0)". Figuring that something got corrupted, I closed the program and rebooted the computer. I then again set up the menues I wanted to use only to get the same error message. I then decided to burn a previous project that I knew to be successful and it burned properly. I then decided to create a new project using the same video files and menus that previously failed. That too proved to be unsuccessful. I went to Corel's website but there was no info available covering my error message.
View 2 Replies View RelatedI cant find a way to access the filter library, click by click workflow.
View 2 Replies View RelatedI have been playing around with the screen capture fature of X5 Pro Ultimate and I am having problems.
When I set the capture to custom and then drag the frame/window or whatever you call it around the section I want to capture it always captures too high and then cuts off bottom. If I capture in full screen is there a crop feature?
The things I want to capture have a window within the full page and I am trying to capture just the window, ie. a Youtube or any other web based video. the dragghing custom isn't working and I see not crop option.
A project I'm working on needs Speech Bubbles with text in them. I Couldn't find this option anywhere.So I started creating the bubbles in PSP x4 and overlaying them in.This works but its a pain when you need 100 of them.Is there an easier way builtin to VideoStudio X4 Ultimate that I can use.
View 4 Replies View RelatedI just grabbed the upgrade to Ultimate (already had VSX4) because the product page said "Advanced video stabilization and image enhancement - Fix even the shakiest video with proDAD Mercalli SE—rock-steady video stabilization, rolling-shutter correction and zoom/pan optimization. You can also adjust color, white balance, tone, exposure and more with multicore processor-accelerated color correction, Advanced DeNoise, Auto Exposure and Lensflare filters." and I need some of these features.
Now that I installed it, I need to find where they hide everything.
I found the Mercalli filter for the "shake, rattle and roll" stuff but I haven't found the "Auto Exposure" stuff and I need to turn down the exposure of this video I am working on (lots of light flares). From the above description/paragraph, I would have though the exposure stuff was under Mercalli, but I haven't found it.
how proDad wasn't visible. Looking through the X5 install folders, I see a bunch of New Blue filters not visible either. The attached image shows the filters in the vft_plug folder, that aren't available within the program.
View 3 Replies View Relatedafter loading vs x4 picture video music and title templates missing.
View 5 Replies View RelatedIt is possible with UVS11 Plus to create an effect earthquake?
Something better than what this here:
[URL]
Is there a way to re-execute the video analysis of the Mercalli filter without having to actually remove the filter and reapply it to the video clip?
I can't seem to find an easy way without removing the filter.
I am running XP and X5 Ultimate.My workflow follows :
File
Insert media file to library
Insert Digital media
Select drive in import from digital media box
Start
Then the screen goes black and the PC reboots with an error report box showing. The DVD has a UDF file system and it is 2.32GB and plays in Power DVD OK.
I've installed all the software and I can use the Boris FX as i can find it in the effects list and drag it on to a clip. However i Can't see Mercalli in the list or find anyway of accessing it from Video Studio
NB I've checked the ProDAD folder that installed and it's only 15mb in size and the .corel folder is empty
Have VideoStudio X4 Ultimate.I have a major issue here and sure hope this is user error - otherwise it would be a major drawback for me.
How can I move a clip or a picture in a certain way.An example:I want it to move in from the left side small, while going to the middle get bigger, then rotate 180° and continue to move it in the upper right corner.
Since installing Video Studio Pro X5 and keeping my previous version (V.S .11+) installed as well,I am unable to open downloaded videos with X5.It is not available as an option even when I browse for it.I have to open it with VS11+ and then import it into X5.
View 14 Replies View RelatedMy Instant Project Custom Templates have disappeared from the edit screen, if I click on browse, then select C:ProgramDataDownloadsTemplates, they are all there, when I try to open them it says they are already installed, yet they are not showing. They were there, but disappeared when I downloaded another 2 custom templates,these 2 are now the only ones that show in custom view. how to get them back
Oops, just noticed that my profile is incorrect, using win 7 Home edition, not XP, now just have to remember how to change my profile