VideoStudio :: Pro 5 Ultimate Error Message 257.0.0
Mar 18, 2013
I've been a Corel Video Studio user for almost 10 years and never ran into this issue. When creating a disc (DVD or Blu Ray), I get an error message while the program is "converting the menues" for burning to blank disc. The message reads "convert step got some problems (257.0.0)". Figuring that something got corrupted, I closed the program and rebooted the computer. I then again set up the menues I wanted to use only to get the same error message. I then decided to burn a previous project that I knew to be successful and it burned properly. I then decided to create a new project using the same video files and menus that previously failed. That too proved to be unsuccessful. I went to Corel's website but there was no info available covering my error message.
I have had this product for about a week and it is fabulous compared to any other video editors I have tested.
There is something odd happening, however. I am using the Mercalli plug-in to stabilize hand-held videos. This works great but the rendered video always has a message overlaid saying the Mercalli analysis must be re-run (even if it has just been done). There IS an exception: render to mpeg4 and everything's fine - stabilization has been applied and no message. If I then take the exact same project (no changes) and render into AVCHD (for example), the output is ruined with the overlay. If I go back into the project again to have a look at what's up re-analysis is NOT called for.
I am trying to install Windows Cleanup Utility from the following link to cure an unspecified error due to a temp file in the hope of stopping this happening again.I have done a disc clean up and deleted temp files manually. ftp://ftp.corel.com/pub/Installer/MSICleanup.exe This does not work……”.problem loading page “ Is there another working link to access this ?
As it did not working well in Win7, I have been uninstalling VS Pro X2. So, I purchased the downloadable upgrade version of VideoStudio Pro X3. The problem : I'm not able to open an existing VSP file. I get this error message : The file "name.vsp" is already in use.
I thought i was getting this message when i enabled ripple select all but now i am randomly getting this message anytime i am using VS. I use VIDEOSTUDIO PRO X3 and i believe i have updated the necessary updates for it . After i get this message, it shuts down VS and i have to restart the program.
When I go to import a clip into videostudio, I get this message: "no storage to save BB" I click ok, then I get the "load from stream error" message.
Here is my info:Windows XP, videostudio 12, Dell Dimension E520. I'm importing an uncompressed AVI (I've done this loads of times with not problems) and I get the message while it's importing.
I've recently updated one of my PC's. I tried to launch VS x5 and I received a "corrupt file message" with error code 38. I've read all of the previous threads here and others online referring to Protexis Licensing V2 in the Services tab. I've un-installed, reinstalled several times. Would be nice is a "Repair" option was available. I've entered the serial numbers, several times, made it to the "Register Product" page but can never get the program to start. This was an update from VS 4 and I've entered the serial number for that when prompted. I have the program working just fine on another completely new system. Both are running Windows 7.
I'm trying to upload a video into YouTube straight from my Video Studio ProX3. Was able to do it successfully with a video just 2 days ago but for some reason, doing a different video (same videocam & format) it's giving me this error message "The entity name must immediately follow the ',&' in the entity reference". And it won't upload or let me proceed. I have no clue what this means, i tried redoing it and changing the video file name and no luck.
Just installed ProX4. When I make a title - either single or multiple - and try to apply a Border/Shadow/Transparency to the text, I get an error message that says . . .
"Encountered An Improper Argument"
Making the title was the ONLY thing in the project.
I completed a video and when I went to 'Create a Video File' I would receive the following error message...
"Failed to open MPEG encoder"
I'm using Ulead VideoStudio 11+. The 'vsp' file is too long...One hour fourteen minutes. I made a 'Part 1' and cut the vsp to forty-five minutes and still received the same error message.
I cut the 'vsp' to one minute thirty seconds and it would "Create a Video File'. I've never had this problem before.
It seems with Ulead VideoStudio 11+ whenever I have a problem like this I can resolve it, by backing up all the files, then removing the program, thoroughly clean the hard drive and re-install 11+.
For some inexplicable reason, the 'Smartsounds' tracks I load into the time line do not RENDER. That is, the 'share' button creates the suitable video file without the music! Their is a message, "Load from Stream Error" which comes up after the rendering process.
Error message showing on Video Studio Pro X2 - when go into edit, pop up message dispays 'Load From Stream Error' which then doesn't allow me to anything further.
If there are any 3D plugins that will work on Pro x6 Ultimate . I've had a look at the VIDEO COPILOT | Element 3D - 3D Object based Particle Plug-in. It lists a lot of programs it will work with but not Corel.
I recently purchased the x5 ultimate pro edition, but a few years ago i had an older version but i noticed something....
the older version used to have close to 40 transitions, but the new one even with the extra download pack still only 3 transitions.. did something not get installed?
I'm having a real problem with VS X4 pro crashing!Ive just started a project I have a video in the toptrack..I've used a instant project the one selected in yellow all seems fine! I move the text from the instant project & select a Title text effect
Preview it all is well! Now change the text from LOREM to Dublin IPSUM to 2012..Change other text & 9 time out of 10 VS4 crashes when i preview the Project.If i don't use the Title text effect it seems fine!I just reinstalled my OS (windows 7 64bit) it will be somthing Ive missed but ???
How long Corel take to send out disc? Im waiting for a VS5 Pro ultimate? i bought VS4 a couple of weeks before they released VS5 & Corel done a deal!
Since downloading the new version I have ran across a display issue. When editing, all of the popup display boxes are too large and extend under my taskbar. I have tried everything such as changing the monitor's screen resolution to nearing every setting. And I have searched and attempted to come up with a fix from with in the preferences, UI layout, etc.
I have prepared a folder using AVCHD for BLU RAY Disc( that is I am not trying to burn Blue Ray from timeline). When I go in share-create disc-pick blue-ray, the program aborts with message 'Program will abort Contact technical support'. No details on error
The file size is less than 6 GB
I am using WIN 8 have 16 GB of ram, Have Blue Ray burner and Quad Core CPU. I have checked and Burner's firmware is up to date Same for Videostudio 15. It has all the updates and patches installed.
I've tried installing the purchased downloaded version of the software to two different Windows 7 64 machines and installation just stops on the first screen. "Next" never becomes active. Corel told me to delete my temp files and I've done that, to no avail. I had the same thing happen with the trial version and just figured that they would have fixed the for sale version.
I am running Vid Studio Pro X4 and am 3 months into a year long project. I was interested in upgrading to Vid Studio X6 Ultimate but wanted to know if X6 will be able to read and properly load the .vsp file for this project which already has many clips, transitions, effects, and audio. Or, should I just stay with X4 until December when my project is finished and then upgrade starting next year's project fresh.
I have done all the updates etc that Corel has suggested and I still cannot make a 3D movie. I do all the steps to make it and when I play it back the audio is there but there is either a white or black screen.
My new Pro X6 doesn't show me the Smart Sounds. You can't klick something in the smartsound window! I also have installed Pro X4, and here I have all smartsounds!
I have been playing around with the screen capture fature of X5 Pro Ultimate and I am having problems.
When I set the capture to custom and then drag the frame/window or whatever you call it around the section I want to capture it always captures too high and then cuts off bottom. If I capture in full screen is there a crop feature?
The things I want to capture have a window within the full page and I am trying to capture just the window, ie. a Youtube or any other web based video. the dragghing custom isn't working and I see not crop option.
A project I'm working on needs Speech Bubbles with text in them. I Couldn't find this option anywhere.So I started creating the bubbles in PSP x4 and overlaying them in.This works but its a pain when you need 100 of them.Is there an easier way builtin to VideoStudio X4 Ultimate that I can use.
I just grabbed the upgrade to Ultimate (already had VSX4) because the product page said "Advanced video stabilization and image enhancement - Fix even the shakiest video with proDAD Mercalli SE—rock-steady video stabilization, rolling-shutter correction and zoom/pan optimization. You can also adjust color, white balance, tone, exposure and more with multicore processor-accelerated color correction, Advanced DeNoise, Auto Exposure and Lensflare filters." and I need some of these features.
Now that I installed it, I need to find where they hide everything.
I found the Mercalli filter for the "shake, rattle and roll" stuff but I haven't found the "Auto Exposure" stuff and I need to turn down the exposure of this video I am working on (lots of light flares). From the above description/paragraph, I would have though the exposure stuff was under Mercalli, but I haven't found it.
how proDad wasn't visible. Looking through the X5 install folders, I see a bunch of New Blue filters not visible either. The attached image shows the filters in the vft_plug folder, that aren't available within the program.
I am running XP and X5 Ultimate.My workflow follows :
File Insert media file to library Insert Digital media Select drive in import from digital media box Start
Then the screen goes black and the PC reboots with an error report box showing. The DVD has a UDF file system and it is 2.32GB and plays in Power DVD OK.