Photoshop :: Installation Stops At Initializing Stage
Feb 11, 2009
CS4 Trial will not load
I have downloaded the trial version of CS4. When installing the download stops at the Initializing stage with Checking System Profile bar stuck at 90%.
The PC has CS3 and Lightroom installed and both run well. The PC has 500 GB HD and 3 GB of ram I have tried to install with and without the virus checker switched on. I have tried also as Administrator, I have run both Win install clean up and the CS4 Clean Script.
View 1 Replies
ADVERTISEMENT
Nov 5, 2013
I have the Cs5 Master Suite and just installed my new Wacom Intuos3 tablet. I'm running on a Windows 7. Before installing Photoshop never had a problem starting up - now it crashes without fail every time. I tried uninstalling the Wacom, rebooting, running a virus check, blah blah blah, but nothing works. Photoshop crashes every time, whether or not the tablet is plugged in or installed now.
View 2 Replies
View Related
Apr 17, 2013
I have Elements 11 (version 11.0), running on Mac OS 10.7.5. The QUICK and EXPERT modes work well but the GUIDED mode never stops initializing. I see that the initializing window opens when I switch to QUICK but when I switch back to GUIDED the Initializing bar is always somewhere in the middle and never moves to the end.
View 10 Replies
View Related
Aug 26, 2008
I downloaded the Photoshop CS3 trial... I finished extracting and I click on Setup. Then a window pops up saying, "Initializing Adobe Photoshop CS3". Then the window closes.
Here are my specs:
1gb Ram
Intel Core 2 Duo
256 MB ATI Mobility Radeon X1400
Windows XP Media Center Service Pack 3
View 2 Replies
View Related
Jan 3, 2013
I tried to install Photoshop CS6. I used the Adobe Download Assistant. During first try of installation my battery of the notebook broke down - I accidentally forgot the charger..When I try now again an installation the Download part with the Assistant works fine but during installation the process does not continue anymore after this step ..The "progress-bar" of this dialog completes but after this nothing happens.
I tried this several times.I also tried to clean the registry (Ccleaner) - no success.
My notebook:
Acer Aspire 5920G
Win7 32bit
Photoshop CS6 via Adobe Dowload Assistant
View 2 Replies
View Related
Jul 11, 2013
I got a Problem the Installation of Photoshop CC stop at 64 % . But why?
View 3 Replies
View Related
Nov 28, 2013
Creative cloud dsek top installation stops at the last bit
View 1 Replies
View Related
Apr 1, 2011
I've tried installing the purchased downloaded version of the software to two different Windows 7 64 machines and installation just stops on the first screen. "Next" never becomes active. Corel told me to delete my temp files and I've done that, to no avail. I had the same thing happen with the trial version and just figured that they would have fixed the for sale version.
Is there a cleaning or prep patch for this one?
View 5 Replies
View Related
May 30, 2012
I have been using Ulead VideoStudio / Corel VideoStudio since the 4SE version and made all upgrades, up to X4.On April 1, 2012, I purchased then the UG from VS X4 Pro to VS X5 Pro and downloaded the software through the link provided by Corel.
I start the installation, enter the S/N of X5 and X4 (because I purchased an upgrade).But installation always stops with an error message at the following step: "Please wait while we configure Microsoft Visual C+++ 2005 Redistributable"
The error message is: "1: ALLUSERS property is not 1 - this MSM cannot be used for a per-user or fallback-to-per-user install".
What I already tried so far...I already uninstalled VS X4 and used the "VS_Cleanup", but the error persists. Meanwhile, I contacted Corel support, and they recommended to uninstall Microsoft Visual C++ and then to re-install it. I followed their instructions and uninstalled all instances of Microsoft Visual C++ and then re-installed the latest version, i.e. Microsoft Visual C++ 2010 SP1 (x64).However, the same problem persists.
Meanwhile, I tried many other approaches: I moved the installation file (.exe file) to the desktop and tried the installation from there, I tried the installation as another user (equally with administrator rights), I tried to install under Windows Safe Mode (this failed, since some necessary drivers or software was apparently not loaded), removed any remaining traces of VS X4 manually and made a registry clean up, etc.Note also that all latest updates of Windows and related software are made.
I also re-downloaded the installation file, in order to make sure there is no problem with a corrupt installation file.
Video standard: PAL/SECAM, manually selected during the installation process.
View 4 Replies
View Related
Aug 15, 2012
An error occored during the installation of assembly component
{5C21D397-1DA5-3749-8C1F-165D21DE9E3E}
The installation up to that point is reversed. No product is installed.
Downloading the file for a second time does no solve the problem.
View 2 Replies
View Related
Nov 28, 2013
Every time I try to do something in Photoshop it starts to "Initializing Type Tool".
View 3 Replies
View Related
Mar 31, 2013
I have cs6 cloud software on windows 7 64 bit. I've been using photoshop without any trouble, but since I downloaded illustrator & indesign, I can't use the type tool in photoshop - i get a message saying that something is preventing the type tool from initialising... so why would this happen and how can I fix it, I need to be able to use type.
View 4 Replies
View Related
Sep 5, 2013
The progress bar makes it about 1/10th of the way and then CC just hangs.
Fortunately, I still have CS6 and it works just fine and dandy, type tool and all. This is all rather frustrating though, since I'm paying for CC and this didn't use to happen. As far as I can tell, CC and all my Adobe CC apps are up to date.
View 3 Replies
View Related
Mar 14, 2014
When I click on the PS 10 the organizer rectangle comes up, but, when I click it the blue screen freezes at the initializing model point and won't go to the list of albums. But, if I click on the Edit, instead, the blue screen goes to the full page with its fix tools. If I click on show items in the bin the whole list of usable albums comes up. I have run every fix and scan I can think of. Premier elements does the same, but, CS6 is fine.
View 3 Replies
View Related
Sep 22, 2013
Whenever I try to start After Effects CC, it gets stuck on "Initializing type engine". This didn't happen on After Effects CS6, and I'm wondering what can be done to fix this. I have about 1,000 extra fonts that don't come with Windows, and if I get rid of them it works just fine. The problem is, without the extra fonts After Effects is pretty much useless to me, and CS6 worked just fine with 7,000+ fonts, so this shouldn't be a problem.
View 1 Replies
View Related
Oct 31, 2011
m using max 2011 on xp 64 bit platform from last 7 month ...but yesterday,i gave for rendering n its got hung, after restarting the max its get stuck at just before user interface loading.. n it wont show in task manager applications window but it appears in processes window n uses 15% memory.
i tried re-installing but problem remains the same even with max 32 bit version......
i have max 9 in my system which works properly.......but not max 11
system config:
windows xp 64 bit sp2
AMD Phenom II x6 1055T Processor,
8.0GB RAM,
NVIDIA GeForce GT 220
View 4 Replies
View Related
Feb 8, 2011
I installed a new harddrive on my laptop and restored a Ghost image of my old drive onto the new one. Most of the installed software worked right off. Some needed to be re-activated as the software detected a significant hardware change. However, PSP X3 would not start, crashing during loading. The PSP X. splash shows and the loading status gets to "initializing palettes" then Windows reports "Corel Paintshop Pro X3 has stopped working. Windows is checking for a solution...". That's it.
I have un-installed PSP X3 and reloaded from CD. I downloaded the 4 existing patches (1 through 4) and installed them in sequence. I didn't try starting PSP X3 until all the patches were in. Corel.com confirms the activation of the software.
I've used PaintShop since the JASC days and the software works great. However, since about version 9, the software has become more prone to crashing under a variety of circumstances. Now it won't start.
Specs
1.8 GHz laptop
3 GB RAM
500 GB Seagate Momentus XT drive with 4 GB RAM buffer (supposedly a "hybrid" drive)
Windows 7 Pro 64 bit
View 13 Replies
View Related
Oct 3, 2012
There was a time, probably 2012 SP1, when smoke startup would take max. 30seconds.Now with 2012 SP2 after selecting a project smoke just hangs at the "Initializing shades" phase for almost 1min. making startups a major 2min.
View 9 Replies
View Related
Jan 25, 2013
Having issue of illustrator failing to launch. Gets as far as Initialising Fonts 90% then freezes. Reinstalling didn't resolve the problem, also made sure it was updated as much as possible. (CS5 on Mac OS X 10.7.4)
View 7 Replies
View Related
Aug 27, 2012
This is happening on all my Autodesk software (AutoCAD, Map 3D, and Civil 3D)(2012 and 2013). . .
I initiate a command (say LINE), I pick my first point to draw the line and nothing happens. I must click it again to get it ot work. It only happens when I'm working fast. For instance:
L (for line)right-click (for ENTER)immdediately try to click the first point of the linenothing happens and I must re-pick the firtst point again
or
E (for erase)right-click (for ENTER)immediately try to pick a corner for your boxnothing happens and I must re-create my selection box However, if I go slow it works fine. For instance, after initating the command simply wait about 2 or 3 seconds and then try to click. It all works fine there, but waiting becomes annoying now.
The mouse clicks work fine in all my other software (Excel, MS Word, etc.). I am having another (maybe totally unrealated issue) with my keyboard. While typing, my cursor will magically move somewhere else on the screen. I'm using a laptop and have made sure I'm not touching the touch pad. This may be a completely unrelated issue to the mouse clicks, but I thought I'd inform you just in case the two go hand in had. by the way. . .dynamic mode is disabled, PICKFIRST is set correctly, and I've messed with the 3D Config options.
View 9 Replies
View Related
Jun 15, 2005
i want to create 3d stage backgroud in photoshop.
View 1 Replies
View Related
Apr 6, 2004
I have an immediate need to create stage lights, similar to these, in photoshop. Ideally I will have 3-4 lights on a black background. Is anyone aware of a tutotial on making stage lights, even if they are not as complex as these?
View 1 Replies
View Related
Oct 13, 2012
I just purchased and loaded Photoshop CS6. Pictures (actually this is for all content in any layers) will not display at all or only partially display (see picture below). I uninstalled and reinstalled the program but there is no change. The other Adobe products from the Master Suite Collection run fine (Flash, Encoder, etc). I am thinking that my installation disc may be corrupted.
View 2 Replies
View Related
Mar 7, 2008
Ive tried to drag an image to my photoshop workspace, howver when I try to do so it instead creates a new window of its own.
View 1 Replies
View Related
Apr 9, 2004
I have been struggling trying to make stage lights, like those that are on the banner of the url below. It looks like the lights themselevs are done with a gradiant effect, I think the same with the cans. If you look closely, there is actually quite a bit of detail; ie: the metal ring around the light, the smoothness of the metal cans, etc.
View 7 Replies
View Related
Mar 21, 2013
When I save to PNG, Photoshop CS6 x64 tells me its stopped working.I'm running Windows 7 64-bit Ultimate.It began happening after I customized my settings & preferences.
If I hit Ctrl+Alt+Shift when launching everything works fine again.After going through all my settings one by one, saving the settings, exiting photoshop, then restarting photoshop, then trying again.. I think I've Narrowed down the porblem
The problem appears to be Isolated in the "Performance" section of PS's Preferences.
I have drives C, D, E, G, I, J, K, & L .... F & H are my Optical Drives, C, D, E, & G are on one HDD, and I, J, K, & L are on a second HDD
When I selected drives D, E, G, I, J, K, & L as my scratch disks and deslected C:, saved settings, exited PS, restarted, dragged a PNG to stage, Photoshop crashed when opening the PNG
When I added C: back to the list, so I had C, D, E, G, I, J, K, L saved, closed PS, re-opened it and dragged the PNG to stage, it crashed again
When I deleted all other drives but C:, saved, exitted, restarted and dragged a PNG to stage, it worked fine again.
When I went through them one by one, adding a drive at a time, I found that drives I, J, & L cause Photoshop to crash.. I, J, K, & L are on the same single physical HDD, but the Partition K: on that Physical Drive works fine in Photoshop
Its apparent this is the problem, as even without restarting Photoshop, dragging in a PNG works fine, simply adding one of these 3 partitions to the list, and hitting ok, will cause it to crash when dragging in the same PNG after saving the preferences
That same Physical drive also is set to Compress files to save more space, but if K also works, its likely not that.i'll check the drives for errors..
View 33 Replies
View Related
Apr 30, 2003
I'm editing a photo of my friend playing a musical instrument. The photo is completely black except for him and the picture is of his profile. I want to add realistic stage lights without the corney lensflare effect. The lights would be added to appear as if the camera is looking right into them.
View 1 Replies
View Related
Jun 7, 2013
So when I open a file that's say, 100px x 100px, usually the PS window would be gray except for a 100pxX100px white square, which is, of course, the stage. However, now instead of the gray outer region (whatever that's called), it is showing as if it was transparent. When I drag the doc window to resize it, the stage is "duplicated" randomly while the transparent outer region continues to grow. I've attached a screen shot. The white block below is the stage. The rest is inaccessible. Also, if I use the Type tool, the screen flickers to its inverse with each keystroke.
View 2 Replies
View Related
Nov 26, 2012
I drawn beyond the stage in Illustrator CS6 and i saved the file in .pdf with the possibility to change it again in Illustrator. Now i can't open it in Illustrator CS6 (two different files same error). I can open the files only in Illustrator CS5 but i can see only the stage.
View 3 Replies
View Related
Mar 28, 2013
I want to divide the stage to 4-5 sections vertically or horizontally and by pressing buttons to navigate/scrolling the stage in these sections.
View 3 Replies
View Related
Apr 27, 2013
I am trying to make a game where when the user presses a button it increments a score on stage.So far I set a text field on stage with name counter:
//set the value of a Symbol variable
sym.setVariable("score", "0");
sym.$("counter").html(sym.getVariable("score"));
How do I code a button to increment this score each time it is clicked?
View 5 Replies
View Related
