I just purchased and loaded Photoshop CS6. Pictures (actually this is for all content in any layers) will not display at all or only partially display (see picture below). I uninstalled and reinstalled the program but there is no change. The other Adobe products from the Master Suite Collection run fine (Flash, Encoder, etc). I am thinking that my installation disc may be corrupted.
View 2 RepliesSometimes this happens. At other times nothing will display at all. I have also had a portion of the picture duplicated multiple times on the stage.
View 4 Replies View RelatedI am having a problem with the display of a custom content center part in an IDW. The cc part has been added to a weldment assembly and has 2 preparation holes drilled into it within the assembly. These holes display fine when showing the whole weldment assembly in the IDW but when I add the cc part on it's own it does not show the drilled holes. I understand this is perhaps because the cc part had to be prepared with the holes and these preparations have not carried over on the IDW, is there a way to display preparations in this way for single cc parts ?
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I am trying to to load a JSON file and load images with text information.
I have a problem when i click the thumbnail, the large image can't displayed, i am receiving the following error:
Failed to load resource: the server responded with a status of 404 (Not Found)
my code in compositionReady:
$.getJSON("content.json",
function(data){
for(var i=0; i<=data.length; i++){
var s = sym.createChildSymbol("template","content");
s.$("title").html(data[i].title);
[code]...
and at the element that hold's the thumbnail image, I added on the click event :
sym.$("finte").css({"background-image":"url("+$(this).data('largeimage ')+")"});
I believe that somewhere on +$(this).data('largeimage')+") is the mistake. But I can't find it.Moreover, how, the thumbnails, can be displayed as a table of 4x5?
i want to create 3d stage backgroud in photoshop.
View 1 Replies View RelatedI have an immediate need to create stage lights, similar to these, in photoshop. Ideally I will have 3-4 lights on a black background. Is anyone aware of a tutotial on making stage lights, even if they are not as complex as these?
View 1 Replies View RelatedIve tried to drag an image to my photoshop workspace, howver when I try to do so it instead creates a new window of its own.
View 1 Replies View RelatedI have been struggling trying to make stage lights, like those that are on the banner of the url below. It looks like the lights themselevs are done with a gradiant effect, I think the same with the cans. If you look closely, there is actually quite a bit of detail; ie: the metal ring around the light, the smoothness of the metal cans, etc.
View 7 Replies View RelatedI'm doing an evacuation plan of an office building. The drawing itself is in the model space, obviously. The fire extinguishers and escape routes are added in layout.
The problem is that everything that I add in the layout ends up beneath the drawing in model space. I.e. the walls of the building are shown in front of the fire extinguishers which makes my evac.plan look like poop.AutoCad Architecture 2013.
When I save to PNG, Photoshop CS6 x64 tells me its stopped working.I'm running Windows 7 64-bit Ultimate.It began happening after I customized my settings & preferences.
If I hit Ctrl+Alt+Shift when launching everything works fine again.After going through all my settings one by one, saving the settings, exiting photoshop, then restarting photoshop, then trying again.. I think I've Narrowed down the porblem
The problem appears to be Isolated in the "Performance" section of PS's Preferences.
I have drives C, D, E, G, I, J, K, & L .... F & H are my Optical Drives, C, D, E, & G are on one HDD, and I, J, K, & L are on a second HDD
When I selected drives D, E, G, I, J, K, & L as my scratch disks and deslected C:, saved settings, exited PS, restarted, dragged a PNG to stage, Photoshop crashed when opening the PNG
When I added C: back to the list, so I had C, D, E, G, I, J, K, L saved, closed PS, re-opened it and dragged the PNG to stage, it crashed again
When I deleted all other drives but C:, saved, exitted, restarted and dragged a PNG to stage, it worked fine again.
When I went through them one by one, adding a drive at a time, I found that drives I, J, & L cause Photoshop to crash.. I, J, K, & L are on the same single physical HDD, but the Partition K: on that Physical Drive works fine in Photoshop
Its apparent this is the problem, as even without restarting Photoshop, dragging in a PNG works fine, simply adding one of these 3 partitions to the list, and hitting ok, will cause it to crash when dragging in the same PNG after saving the preferences
That same Physical drive also is set to Compress files to save more space, but if K also works, its likely not that.i'll check the drives for errors..
I have the Cs5 Master Suite and just installed my new Wacom Intuos3 tablet. I'm running on a Windows 7. Before installing Photoshop never had a problem starting up - now it crashes without fail every time. I tried uninstalling the Wacom, rebooting, running a virus check, blah blah blah, but nothing works. Photoshop crashes every time, whether or not the tablet is plugged in or installed now.
View 2 Replies View RelatedI'm editing a photo of my friend playing a musical instrument. The photo is completely black except for him and the picture is of his profile. I want to add realistic stage lights without the corney lensflare effect. The lights would be added to appear as if the camera is looking right into them.
View 1 Replies View RelatedCS4 Trial will not load
I have downloaded the trial version of CS4. When installing the download stops at the Initializing stage with Checking System Profile bar stuck at 90%.
The PC has CS3 and Lightroom installed and both run well. The PC has 500 GB HD and 3 GB of ram I have tried to install with and without the virus checker switched on. I have tried also as Administrator, I have run both Win install clean up and the CS4 Clean Script.
Somehow the Content Center Filter clears all content while in ISO or DIN. Both libraries are turned on in project.
I can see only one custom library when either filter engaged. I also see both ISO and DIN parts when filter is off.
[URL] ........
Since installing Buildinfg Design Suite Standard 13 my content explorer is showing a yelow error sign saying indexing error over content drawing icons. How do i fix this?
View 2 Replies View RelatedSo when I open a file that's say, 100px x 100px, usually the PS window would be gray except for a 100pxX100px white square, which is, of course, the stage. However, now instead of the gray outer region (whatever that's called), it is showing as if it was transparent. When I drag the doc window to resize it, the stage is "duplicated" randomly while the transparent outer region continues to grow. I've attached a screen shot. The white block below is the stage. The rest is inaccessible. Also, if I use the Type tool, the screen flickers to its inverse with each keystroke.
View 2 Replies View RelatedI am currently writing a book that will initially be sold as a PDF but may later go on the i Book store, however I don't have a Retina display myself and what is the best practice for making screenshots from a normal display look acceptably sharp on a Retina display?
I have Photoshop along with the iOS simulator that shows how the iPad or iPhone will look if they can be used in some way but I mainly need to get menu items and dialogue boxes from various applications in OS X and Windows looking good on Retina screens. I really don't want to pay out for a Retina display purely for this task that would only take a few hours of work at most.
I drawn beyond the stage in Illustrator CS6 and i saved the file in .pdf with the possibility to change it again in Illustrator. Now i can't open it in Illustrator CS6 (two different files same error). I can open the files only in Illustrator CS5 but i can see only the stage.
View 3 Replies View RelatedI want to divide the stage to 4-5 sections vertically or horizontally and by pressing buttons to navigate/scrolling the stage in these sections.
View 3 Replies View RelatedI am trying to make a game where when the user presses a button it increments a score on stage.So far I set a text field on stage with name counter:
//set the value of a Symbol variable
sym.setVariable("score", "0");
sym.$("counter").html(sym.getVariable("score"));
How do I code a button to increment this score each time it is clicked?
I need to insert multiple Edge Animate in the same webpage, but it’s impossibile change the id… always “Stage” and same name create problem with W3C validation.
How to rename the stage’s id?
A way to edit the Stage Storage table output? I'm trying to figure out a way to have the table output default to acre-feet in lieu of cubic-feet as well as omit some of the cells that are generated by default.
View 2 Replies View RelatedI have created a dynamic block of our companies Stage section. The block is set up as a rectangular array using XY parameters. The block itself works fine however I created block attributes in the block dwg to display its measurements using the Distance x and Distance y totals.
When inserting the block into a new drawing I need to explode the block in order for the array to work, however this also means that the text is no longer locked to the block. is there a way around this?
I have been send a dwg of a elevation of a kitchen plans that I want to include into my drawing, everything looks ok in autocad but when I go to print this drawing, non of the lines show up just a few random text boxes but no text, no layers are set to not print so why this is so.
I can not upload the file as its 3.32mb.
I'm working on a small banner type ad for someone. The ad has the word "FREE" that turns on and off about every 1/8 second using opacity and placing the elements in different places on the stage - works fine.
However, is it possible to take one element (the "free" text) and have it randomly run at different places on the stage (jQuery I suppose)? My only reason for this is to learn something new and clean up the stage that currently has 30 elements, all duplicates!
What would be best work flow for showing a part and having drawing for the different stages of machining, I would like to have a print with different sheets at say a lathe stage, than a broached part stage, then a milled stage. Should I do a part for each stage, just save to a different name or Start with a part from the first op, than derive it to another part, and make that part complete on second op, than derive it and make a third part, and so on.
Would like to do this, because we make special shaped part from round stock, so need print's to tell floor people rough blank form. Than mills machine it into final form from that lathe blank.
Similar to casted and machined drawing
What would be the best way to create a stage storage report with a basin that has multiple depressions and high points in the bottom of the basin?
The stage storage report seems to calculate these features as an addition when it should be subtracting for high points.
Could I do a bounded volume and set the datum to each increment of storage? How accurate is that? If it's accurate, is there a way do generate multiple at a time instead of typing D then setting the datum, then repeating that process over and over?
The only way that seems the most accurate is to create multiple planes at different increments, add those to seperate surfaces, then a volume surface for each one comparing it to the basin. This method takes up a ton of time, especially when dealing with 50+ increments.
I see Civil3D has a Stage-Storage curve for determining volumes for incremental elevation increases for a bounded area (e.g. pond). This works well for water where the top surface is horizontal, however, i need to consider a sloping surface to duplicate a slurry discharged into a lagoon. This has a slope of 1% from the point of discharge and how i can determine the volume/height relationship considering this slope without having to do multiple grading and surface creation. The discharge point gradually moves upstream as the filling occurs to prevent the pipe becoming blocked by the slurry.
I thought about creating a 1% surface and incrementally raising it making it a comparison surface, but the 1% slope is not in a planar form, it is 1% from the discharge point in a radial direction.
I'm working on a project in Edge Animate, however I have about zero experience with JavaScript and I can't seem to get this working without it.
Below you see the code. It's part of a Symbol situated on the Stage. What I need it to do is to play from a Label ('subFontsTitels') situated on the Stage-level. I've tried a lot of posibilities but with no (satisfying) results.
Part of the code:
Symbol.bindElementAction(compId, symbolName, "${_Button}", "click", function(sym, e) {
// play the timeline from the given position (ms or label)
sym.getComposition().getStage().sym.play('subFontsTitels');
// insert code for mouse click here
});
//Edge binding end
Im trying to build a long scrolling page and i need more than a 10000 px stage but edge only allows me a 10000px max height. How can i create a longer page and are their performance issues with a stage that size?
View 4 Replies View RelatedI have built a product walk through demo using edge animate, in this demo i have set stage to percentage but when i see my demo in ipad, the text remain its original size .
how to set text according my stage persentage.