Photoshop :: CS5 Crashes During Initializing Startup Stage?

Nov 5, 2013

I have the Cs5 Master Suite and just installed my new Wacom Intuos3 tablet. I'm running on a Windows 7. Before installing Photoshop never had a problem starting up - now it crashes without fail every time. I tried uninstalling the Wacom, rebooting, running a virus check, blah blah blah, but nothing works. Photoshop crashes every time, whether or not the tablet is plugged in or installed now.

View 2 Replies


ADVERTISEMENT

Photoshop :: Installation Stops At Initializing Stage

Feb 11, 2009

CS4 Trial will not load

I have downloaded the trial version of CS4. When installing the download stops at the Initializing stage with Checking System Profile bar stuck at 90%.

The PC has CS3 and Lightroom installed and both run well. The PC has 500 GB HD and 3 GB of ram I have tried to install with and without the virus checker switched on. I have tried also as Administrator, I have run both Win install clean up and the CS4 Clean Script.

View 1 Replies View Related

Paint Shop Pro :: X3 - Won't Start - Crashes At Initializing Palettes

Feb 8, 2011

I installed a new harddrive on my laptop and restored a Ghost image of my old drive onto the new one. Most of the installed software worked right off. Some needed to be re-activated as the software detected a significant hardware change. However, PSP X3 would not start, crashing during loading. The PSP X. splash shows and the loading status gets to "initializing palettes" then Windows reports "Corel Paintshop Pro X3 has stopped working. Windows is checking for a solution...". That's it.

I have un-installed PSP X3 and reloaded from CD. I downloaded the 4 existing patches (1 through 4) and installed them in sequence. I didn't try starting PSP X3 until all the patches were in. Corel.com confirms the activation of the software.

I've used PaintShop since the JASC days and the software works great. However, since about version 9, the software has become more prone to crashing under a variety of circumstances. Now it won't start.

Specs
1.8 GHz laptop
3 GB RAM
500 GB Seagate Momentus XT drive with 4 GB RAM buffer (supposedly a "hybrid" drive)
Windows 7 Pro 64 bit

View 13 Replies View Related

Photoshop :: CS6 Crashes On PNG Save Or Drag-to-Stage?

Mar 21, 2013

When I save to PNG, Photoshop CS6 x64 tells me its stopped working.I'm running Windows 7 64-bit Ultimate.It began happening after I customized my settings & preferences.
 
If I hit Ctrl+Alt+Shift when launching everything works fine again.After going through all my settings one by one, saving the settings, exiting photoshop, then restarting photoshop, then trying again.. I think I've Narrowed down the porblem
 
The problem appears to be Isolated in the "Performance" section of PS's Preferences.
 
I have drives C, D, E, G, I, J, K, & L .... F & H are my Optical Drives, C, D, E, & G are on one HDD, and I, J, K, & L are on a second HDD
 
When I selected drives D, E, G, I, J, K, & L as my scratch disks and deslected C:,  saved settings, exited PS, restarted, dragged a PNG to stage, Photoshop crashed when opening the PNG
 
When I added C: back to the list, so I had C, D, E, G, I, J, K, L saved, closed PS, re-opened it and dragged the PNG to stage, it crashed again
 
When I deleted all other drives but C:, saved, exitted, restarted and dragged a PNG to stage, it worked fine again.
 
When I went through them one by one, adding a drive at a time, I found that drives I, J, & L cause Photoshop to crash..  I, J, K, & L are on the same single physical HDD,  but the Partition K: on that Physical Drive works fine in Photoshop
 
Its apparent this is the problem, as even without restarting Photoshop, dragging in a PNG works fine, simply adding one of these 3 partitions to the list, and hitting ok, will cause it to crash when dragging in the same PNG after saving the preferences
 
That same Physical drive also is set to Compress files to save more space, but if K also works, its likely not that.i'll check the drives for errors..

View 33 Replies View Related

Photoshop :: CC Crashes On Startup Under OS X 10.8.5?

Sep 23, 2013

After Adobe Creative Cloud installed Photoshop CC via the root account, see:
 
[URL]
 
The Adobe Photoshop CC 14.1.1 (14.1.1.415) crashes immediately on startup under OS X 10.8.5 unless I am running logged into the root account.  This happens when I try to run Adobe Creative Cloud.app as a standard user or as a user with admin privileges.
 
In other words, the only way I am able to run the Adobe Photoshop CC application is if I take the dangerious option of enablign the root account, logging into it and then directly running the application.
 
how I can run Adobe Photoshop CC without having to both enable and login to the root account.

View 5 Replies View Related

Photoshop :: CS6 Crashes On Startup?

Apr 5, 2013

When I launch PS CS6, I see the splash screen, and then the workspace, and then the program immediately crashes. I have verified that this is happening with all user accounts. OS is 10.7.5, PS version is 13.0.4. All of the other programs in the Production suite launch without a problem. Here is the crash report:
 
Process:     Adobe Photoshop CS6 [13488]Path:   /Applications/Adobe Photoshop CS6/Adobe Photoshop CS6.app/Contents/MacOS/Adobe Photoshop CS6Identifier:  com.adobe.PhotoshopVersion:     13.0.4 (13.0.4.28)Code Type:   X86-64 (Native)Parent Process:  launchd [9427]
 
Date/Time:   2013-04-05 12:36:11.076 -0500OS Version:  Mac OS X 10.7.5 (11G63b)Report Version:  9
 
Interval Since Last Report:      1258 secCrashes Since Last Report:       6Per-App Interval Since Last Report:  20 sec
Per-App Crashes Since Last Report:   6
Anonymous UUID:                  0CBA49E8-64A2-4980-B2F3-9D8B43101BBE 
Crashed Thread:  0  Dispatch queue: com.apple.main-thread

[code]....

View 4 Replies View Related

Photoshop :: CS6 Crashes At Startup?

May 8, 2012

I have just installed Photoshop CS6 trial and it crashes very often at startup (with windows error reporting message). I disabled plugins, GPU but no luck.What can i do next? (Ps CS5.1 worked fine)

View 11 Replies View Related

Photoshop :: Crashes On Startup

Mar 17, 2009

I installed it updated it and it still crashes. I have a feeling its my videocard but im not sure what and why. My videocard is updated and the reason i believe its my videocard is that when i pull up After Effect "sniffer_GPU.exe" crashes. I know its a different program but any graphical CS4 program crashes.

View 1 Replies View Related

Photoshop :: CS6 Crashes At Startup After 13.05 Update?

Jun 14, 2013

Photoshop cs6 crashes at startup after 13.05 update?

View 8 Replies View Related

Photoshop :: CS6 Extended Often Crashes At Startup?

Dec 4, 2012

My PS CS6 extended often crashes at startup and do not find any solution. i´m using Windows 7 Ultimate 4GB Ram 64 bit Intel Core 2 Duo CPU

View 3 Replies View Related

VideoStudio :: X4 Crashes On Startup?

Aug 13, 2011

I've been using VSX4 for about 4 weeks without any problems, aside from the very occasionaly crash. The last time I used it was three days ago.

I've tried to use it today to find it crashes at startup every time. I have restarted my PC several times to no avail. As far as I can recall, I have not installed anything in the last three days, or updated drivers.

I have uninstalled and then reinstalled. Again, to no avail.

VSX4 creates a dump file each time, which I can't view in any software I have.

I have tried contacting Corel but get a very cryptic message that a case has been created then "Case creation fail" message!

View 2 Replies View Related

VideoStudio :: X4 Crashes On Startup

Apr 25, 2012

I've been using VSX4 for about 4 weeks without any problems, aside from the very occasionaly crash. The last time I used it was three days ago.

I've tried to use it today to find it crashes at startup every time. I have restarted my PC several times to no avail. As far as I can recall, I have not installed anything in the last three days, or updated drivers.

I have uninstalled and then reinstalled. Again, to no avail.

VSX4 creates a dump file each time, which I can't view in any software I have.

I have tried contacting Corel but get a very cryptic message that a case has been created then "Case creation fail" message!

View 1 Replies View Related

GIMP :: 2.8 Crashes During Startup

Apr 2, 2013

It's probably something to do with the brushes 'cause when the folder (for the brushes) was still empty; Gimp started without any problems. And now, when the brushes are there, Gimp keeps on crashing. I'm 100% sure that this never happened to me when I was using the 2.6 version. URL....

View 2 Replies View Related

AutoCAD LT :: 2013 - Crashes At Startup?

Oct 15, 2012

AutoCAD LT 2013 - Crashes at startup and haven't been able to use at all!

Autocad opens and them it closes itself very quick. It doesn´t give me any error. The program was running ok, until last week. Haven´t make any system changes

I´ve tried to uninstall and them install de program, reinstall :NET framework and still nothing

View 3 Replies View Related

GIMP :: 2.8 Crashes On Startup In Windows 8

Mar 5, 2013

I have a new (cheap) Lenovo Notebook that came preconfigured with Windows 8.

With some effort, I have configured it to have an administrator account and a normal user account.

Today I downloaded the latest GIMP and installed it on the administrator account. The program starts fine (albeit painfully slowly) and seems to run normally on the administrator account. However, in the normal user account, Gimp gets part way through loading and crashes as shown in this image:

what the error message: "The application has requested the Runtime to terminate it in an usual way" might mean?

View 7 Replies View Related

After Effects :: CC 12.2 Crashes After Startup With NO Error?

Feb 24, 2014

I've recently updated CC from 12.1 to 12.2 and I cannot launch it anymore. After Effects launches its UI and after 2-3 seconds it crashes without any error message or crash log. My specs:
 
Windows 7 Home Premium 64bit
Intel Core i5 3450 3.1GHz
Geforce GTX 560
Gigabyte P67A-D3-B3 motherboard
16GB ram
 
I've already reinstalled After Effects about 4 times, deleted media cache, deleted preferences, updated graphics drivers, rebooted my PC dozens of times but I still can't run it.

View 2 Replies View Related

Illustrator :: CC Crashes At Startup Promo Screen

Jan 19, 2014

I installed Mavericks and decided to update to Illustrator CC. It downloaded fine and when I went to launch it it opened up to the promo screen showcasing the new features like rounded corners and the segment editing tool etc. When I go to click the "Done" button Ai CC crashes. Nothing I do resolves this. So I ran uninstall and re-installed it and the same exact thing happens every single time.
 
A few points of fact:
- I have NO PLUGINS installed for Ai CC
- I do have Ai CS5 installed (Need this to access old art in my archive that is FreeHand format)
- I have Ai CS6 installed (Because most of my clients aren't on Ai CC yet)
- Photoshop CC works fine
- MUSE CC works fine
 
I uninstalled Ai CC again and the past two days had a MAC IT specialist come in and clean up my entire system to make sure it's in perfect condition before I downloaded and tried to install Ai CC again. My system hasn't been this fine tuned since I installed Mountain Lion, everything is working great.
 
I tried to install Ai CC again and the exact same thing happened it crashes at the promo screen. When I go and click the "Done" button the beach ball spins and the whole app goes down. Every single time with no exception.
 
Ai CS6 works fine, no problems at all.
 
Here is the crash report generated when I last tried to install Ai CC: [URL]
 
My system information is here too in case you need to know machine specs: [URL]
 
The inane "Adobe Customer Care" on twitter isn't cutting it with their scripted responses that solve nothing and blame everything on the user.
 
This is really getting old and I've wasted two days of work time because what should be simple, simply is not.

View 8 Replies View Related

AutoCAD Inventor :: 2013 Crashes At Startup Window?

May 1, 2012

Every so often when I open 2013 inventor it freezes at the startup window. the "progress bar" at the bottom gets about 75% across, then freezes. If I click on the window it, a dialog box appears that will let me close the program or check online for a solution. It has happened on all 7 machines here.

Dell t1500 i7 8 gb ram
Windows 7 64 bit
ati firepro v4800

View 3 Replies View Related

Illustrator :: CC 17.1 Crashes On Startup Brand New Install On Mac Running 10.6.8

Feb 7, 2014

How do I make it work

View 5 Replies View Related

AutoCAD 2010 :: Reference Manager 2012 Crashes At Startup?

Dec 4, 2012

When I start Reference Manager, the program window opens but at the same moment a message window opens saying 'AutoCAD component has stopped working Windows is checking for a solution to the problem...'. A solution is not found, so I can only select 'Close program', and the program closes. I have run Reference Manager successfully a few weeks ago, and after that I haven't installed or removed Autodesk programs. I have Windows 7 64-bit, AutoCAD Mechanical 2012 SP2 and Factory Design Suite Ultimate 2013. I cannot use Reference Manager 2013 (which works) because it saves the files in 2013 format.

In Windows Control Panel / Troubleshooting I found a file with the following text:

Description

Faulting Application Path: C:Program FilesAutodeskAutoCAD Mechanical 2012AdRefMan.exe

Problem signature

Problem Event Name: APPCRASH

Application Name: AdRefMan.exe

Application Version: 18.2.51.0

Application Timestamp: 4d4b63d1

Fault Module Name: AdRefMan.exe

Fault Module Version: 18.2.51.0

Fault Module Timestamp: 4d4b63d1

Exception  c0000005

Exception Offset: 000000000003dc71

OS Version: 6.1.7601.2.1.0.256.48

Locale ID: 1035

Additional Information 1: 9416

Additional Information 2: 9416e8b8865dfbe86f7b5b96c4331260

Additional Information 3: c86b

Additional Information 4: c86b8562f11a561a601a7649b1d675a3

View 3 Replies View Related

Lightroom :: 3 Crashes At Startup When It Automatically Attempts To Find A Missing File?

Jun 18, 2012

I have, of course, uninstalled and reinstalled the program several times, along with computer reboots each time.  It is still trying to find this file.  I even attempted to find and replace the file so it could find it, but nothing seems to work.

View 1 Replies View Related

Photoshop :: Initializing Type Tool

Nov 28, 2013

Every time I try to do something in Photoshop it starts to "Initializing Type Tool".

View 3 Replies View Related

Photoshop :: Type Tool Not Initializing?

Mar 31, 2013

I have cs6 cloud software on windows 7 64 bit. I've been using photoshop without any trouble, but since I downloaded illustrator & indesign, I can't use the type tool in photoshop - i get a message saying that something is preventing the type tool from initialising... so why would this happen and how can I fix it, I need to be able to use type.

View 4 Replies View Related

Photoshop :: CC Hangs On Initializing The Type Tool?

Sep 5, 2013

The progress bar makes it about 1/10th of the way and then CC just hangs.
 
Fortunately, I still have CS6 and it works just fine and dandy, type tool and all. This is all rather frustrating though, since I'm paying for CC and this didn't use to happen. As far as I can tell, CC and all my Adobe CC apps are up to date.

View 3 Replies View Related

Photoshop Elements :: Guided Mode Never Stops Initializing?

Apr 17, 2013

I have Elements 11 (version 11.0), running on Mac OS 10.7.5. The QUICK and EXPERT modes work well but the GUIDED mode never stops initializing. I see that the initializing window opens when I switch to QUICK but when I switch back to GUIDED the Initializing bar is always somewhere in the middle and never moves to the end.

View 10 Replies View Related

Photoshop Elements :: Blue Screen Freezes At Initializing Model Point

Mar 14, 2014

When I click on the PS 10 the organizer rectangle comes up, but, when I click it the blue screen freezes at the initializing model point and won't go to the list of albums. But, if I click on the Edit, instead, the blue screen goes to the full page with its fix tools. If I click on show items in the bin the whole list of usable albums comes up. I have run every fix and scan I can think of. Premier elements does the same, but, CS6 is fine.

View 3 Replies View Related

After Effects :: Initializing Type Engine

Sep 22, 2013

Whenever I try to start After Effects CC, it gets stuck on "Initializing type engine". This didn't happen on After Effects CS6, and I'm wondering what can be done to fix this. I have about 1,000 extra fonts that don't come with Windows, and if I get rid of them it works just fine. The problem is, without the extra fonts After Effects is pretty much useless to me, and CS6 worked just fine with 7,000+ fonts, so this shouldn't be a problem.

View 1 Replies View Related

3ds Max :: 2011 Hangs While Initializing The User Interface?

Oct 31, 2011

m using max 2011 on xp 64 bit platform from last 7 month ...but yesterday,i gave for rendering n its got hung, after restarting the max its get stuck at just before user interface loading.. n it wont show in task manager applications window but it appears in processes window n uses 15% memory.

i tried re-installing but problem remains the same even with max 32 bit version......

i have max 9 in my system which works properly.......but not max 11

system config:
windows xp 64 bit sp2
AMD Phenom II x6 1055T Processor,
8.0GB RAM,
NVIDIA GeForce GT 220

View 4 Replies View Related

AutoDesk Smoke :: Project Just Hangs At Initializing Shades

Oct 3, 2012

There was a time, probably 2012 SP1, when smoke startup would take max. 30seconds.Now with 2012 SP2 after selecting a project smoke just hangs at the "Initializing shades" phase for almost 1min. making startups a major 2min.

View 9 Replies View Related

Illustrator :: Failing To Launch Freezes At Initializing Fonts 90%?

Jan 25, 2013

Having issue of illustrator failing to launch. Gets as far as Initialising Fonts 90% then freezes. Reinstalling didn't resolve the problem, also made sure it was updated as much as possible. (CS5 on Mac OS X 10.7.4)

View 7 Replies View Related

AutoCAD 2013 :: Mouse Click Doesn't Stick After Initializing Command

Aug 27, 2012

This is happening on all my Autodesk software (AutoCAD, Map 3D, and Civil 3D)(2012 and 2013). . .

I initiate a command (say LINE), I pick my first point to draw the line and nothing happens.  I must click it again to get it ot work.  It only happens when I'm working fast.  For instance:
L (for line)right-click (for ENTER)immdediately try to click the first point of the linenothing happens and I must re-pick the firtst point again

or
 
E (for erase)right-click (for ENTER)immediately try to pick a corner for your boxnothing happens and I must re-create my selection box However, if I go slow it works fine.  For instance, after initating the command simply wait about 2 or 3 seconds and then try to click.  It all works fine there, but waiting becomes annoying now. 

The mouse clicks work fine in all my other software (Excel, MS Word, etc.).  I am having another (maybe totally unrealated issue) with my keyboard.  While typing, my cursor will magically move somewhere else on the screen. I'm using a laptop and have made sure I'm not touching the touch pad.  This may be a completely unrelated issue to the mouse clicks, but I thought I'd inform you just in case the two go hand in had. by the way. . .dynamic mode is disabled, PICKFIRST is set correctly, and I've messed with the 3D Config options.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved