I'm running VideoStudio X2...
Example:
Let's say that there is several seconds of a dog barking in one of my clips. The dog bark is a bit faint, so I need to boost the audio level of the dog barking. Can this be done?
I used many clips capture from a Sony HD Camorder.Everything's working fine in VideoStudio when I do a preview of my project.
My problem is with the exported file ; on some clip, when the clip begin the sound is muted for about 7-8 seconds, After that, the sound come back.I tried to slip the sound from the clip, remove the transition, nothing work.
I have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
[URL]
I have this problem in VS11, and was about to buy X5 thinking that the problem would be solved by now. But to be safe I thought that I better try the demo first, and now I find out it does the same thing.
2. Describe your problem: The file is a TV tuner capture from one particular channel, and every time you edit it it produces correct video, but audio with alternate 1/2 seconds of silence.
3. What devices are involved and their mode of connection?: Internal TV tuner cards (Compro and Leadtek)
4. The Version of program is being used e.g. VS11+ VS11.5+ VSX2+VSX3+VSX4+X5
5. list all patches/updates that have been installed relating to that version of the program.
VS11 updated to VS11.5 and X5 with no updates - it won't allow SP1 to install -
6. Details of the source files. Note: to obtain all the properties of a file, right click on a video file in either the VS timeline or library window.[b] Where did they originate (camcorder, internet, TV card etc) How did they get onto your hard drive (download, firewire, USB cable etc.)
Type of video e.g. MPEG2, DV, MTS, Mov, DivX, MPEG4 etc
Video data rate
Type of audio e.g. LPCM, AC3, MP3 etc
Audio data rate
I know how to change the playback speed of a video clip in my project, but is there a way to have it smoothly transition? For instance, can I have it go from 1x to 3x over a period of 2 seconds or must I jump directly from 1x to 3x (or manually break the files into dozens of super small chunks and manually increase each one... which will still not look smooth)?
View 2 Replies View RelatedThe audio level controls seem to bottom out before the sound has zeroed creating audio leakage from tracks set to minimum. -36db is not zero. It would sure be nice to fade out an audio track and have it be silent.
View 6 Replies View RelatedI'd like to fade the audio from 100% to 50% over a period of time as opposed to a hard cut in volume. Any trick for doing this smoothly (besides cutting it into 50 individual chunks and manually doing it)?
View 1 Replies View Relatedwhy my audio level in my clips diminishes when imported into X4? The level is fine when the un-edited clip is viewed in Windows Media Player but is significantly lower in X4 when viewed in "Clip Mode" and even lower in "Project Mode".
I've raised the audio level as high as 500% but it's just not the same level and quality as actually recorded.
I've attached the properties from a short clip.
I'm still struggling with getting this long ago purchased and registered version working properly on my XP Media Edition, installed on an 4 year old Toshiba laptop with an external NAS hard drive. (Additional future system details to be provided as is necessary.)
I had no problems with the previous version 10 on this system, or version 11 on another system, but the X2 version has been a long outstanding headache in attempting to reach a working status. I'd be more than willing to again upgrade, but only if I had assurances that I wouldn't have to reset the clock. My editing needs are very basic, so additional enhancements offer no benefit beyond bug fixes and patches.
Corel's technical support eventually resolved one frustrating X2 operational problem in setting up a separate VSP user profile with all working files, not just the program files, needing to reside on the local drive, not the NAS. (That's something that should be documented properly somewhere, if not already in this forum as I extensively searched at that time for a reference and found none.)
My current problem is that audio coming out on burned DVD's is very faint. The input is occurring with a .mpg video file and it's enclosed audio voice track.
I have tried the volume control without success, plus the mute function. The problem is that the sound level is not muted, just very faint as to be almost unheard even when played back on the DVD player at maximum volume.
I have tried extracting that .mpg audio track in VSP, saving it in both .mpa and .wav formats, then reinserting into the time line, but the result is the same. It's still very faint. However, if I use one of the sample .mpa audio files found in VSP it burns through to a DVD in the normal manner. This works, even when accompanied by the video audio which still comes out so faintly.
The volume level plays normally in VSP and VLC from the raw file, as well as from the burned DVD. It's when the burned DVD is placed in a regular DVD player that the problem shows up. I've used the same input file source for editing and burning in VS 10 and 11 with no similar problems.
I've searched the web, this bulletin board and consulted with a movie editing professional before posting this message. I'll be continuing my exploratory approaches, first with another entirely video input source and also with another DVD player, plus anything else that comes to mind but my options are becoming limited.
I have several movie clips I want to turn the volume down to the same level. I don´t want to do it one clip at a time. When I select multiple clips, the sound level bar turns gray and I can´t change the level.
View 3 Replies View RelatedI've been using Videostudio Pro X4 for a few days now and I've seem to have run into the problem of losing the audio of clips after I have muli-trimmed them. It doesn't matter where I multi-trim them in the timeline, after I have confirmed the trim I lose the audio for the clip?
Let me be clear: the audio for the clips work perfectly before any editing ie. trimming and they are placed in the main video track. The clip formats are mainly AVI, MP4 and DivX AVI and have varying lengths.
I recently upgraded my Corel VideoStudio X2 to Corel VideoStudio x4 Pro. After removing the old program and installing the updated version,I then restarted my computer and attempted to use it to edit a video. I placed the youtube video that I'd converted to AVI format into the timeline on the program. I then proceeded to attempt to trim <cut> the video at the first place that needed to be fixed and also at the end of the area to be repaired. After fixing it,I then reset the video to the beginning and watched for the expected changes. Much to my surprise,there was audio all way to the first cut spot on the video and absolutely nothing for the entire rest of the video;even in the cut or changed area. I was naturally puzzled as I never had this issue with the previous version. I then checked all my system audio controls and those of the program to make sure that nothing had changed or been accidently muted;including all audio settings were at proper levels,and everything was on and working as should be. I then checked the device manager to see if I found any yellow "?" marks on it for some strange reason to insure that all drivers were installed correctly;and found nothing amiss there. I then went to youtube and played a video and then a music CD in my computer to insure that my audio system was still functioning correctly and,as expected,they both worked fine and gave me audio output. Puzzled,I closed out the VideoStudio and all programs and re-started my computer. I then re-opened VideoStudio and tried again. I placed the same video on the timeline and played it without any changes. It played perfectly fine and I had audio thru-out the entire video. I then re-tried to adjust the video by clipping it and once again...no sound for the rest of the video. I re-checked all drivers and audio connections without finding anything amiss. I even tried other videos that I'd converted to AVI format in the program timeline,that I still had on computer with the same exact results after picking a spot and clipping them as before.....no audio. I even tried clipping the video in different spots;both by clicking on the scissors and with the editing options located in the program interface with the exact same results...no audio after the cut. I searched thru the program interface. I enjoyed the previous version immensly so was looking forward to using the updated version;but can't unless I can get this problem reesolved. Worse case,I can go back to the old version that worked fine for me but I hope not to.
View 2 Replies View RelatedHow can I reduce the audio volume for all the clips in the project? The original sound from the video clips is just ambient noise. I want to reduce it all by the same amount throughout the project, so that the music I put on the music track will be easier to hear, with the ambient noise being only a soft background. I can't find any control that lets me change the volume for all clips at once, and the documentation isn't very clear.
View 8 Replies View RelatedI had noticed this when I tried using a loud audio sound effect so I removed it and changed it to something else but I am concerned about this. Here is the situation:
Segment 1: talking head video
Segment 2: black block with animation and no sound
Segment 3: black block with animation and a short sound effect (breaking glass)
Segment 4: black block with the end of animation and voice from the video
Segment 5: back to the talking head video as a continuation of segment 1
The problem I notice is that the sound, in segment 4 is very low as if the video is "recovering" from the sound effect in the previous segment. It is like it adds a fade-in where I don't need one at all.
Is that a normal "reaction" of the audio after a sound effect?
I have few avi video clips which I believe I imported from camcorder using windows moviemaker. When I play those clips in any media player they play fine.
I have latest Corel Video Studio Pro X3. When I import this videos into timeline and play clips sound plays fine but when I play the project there is no audio. Even if I render it there is no sound.
How to fade the volume out completely at the end of a audio clip. I have read the manual on the subject and have tried to follow the instructions that it gives. Until now I have not had any success. I know that I am missing something I just don't know what it is. I would like the audio to fade out completely so that I can fade in to another audio clip. I have clicked the fade out tabs but the volume only decreases a little at the end of the clip.
View 7 Replies View Relatedwhen I split an Avi file I have, if I have the clip selected and highlighted, I get audio. If I click on the time line, so no specific clip highlighted, I don't get any audio?
If I create a file, the produced file has no audio
I am attempting to completely strip and/or delete the audio from a video clip after I drag it into the time line.
The purpose is to not only eliminate the audio entirely since it will never be used with the video, but to also make the total file size smaller.
I notice that when I "split the audio" from the video clip, the audio clip is still present in the video and the file size is the same -- even after I have deleted the "now split audio" from the time line. When I right click on the video clip, I also notice that the audio is simply muted, not deleted.
Is there any way to totally delete the audio?
I've just bought VideoStudio Pro X4 and I want to mute the sound on my clips as I'm going to have music playing instead. On page 115 of the manual it says I will find the clip volume control in the Music and Voice tab. I have been all over the program interface and clicked on virtually everything but I cannot find a Music and Voice tab. In the end I had to split the audio for each clip and delete it. how to find the Clip audio volume control?
View 2 Replies View RelatedDescribe your problem: Once I've inserted a video file or files into the project timeline, playing the videos with the word "Project" under the screen highlighted, the audio (which is speech only) breaks up - all I hear is parts of words every second or two. Highlighting the term "Clip" just under "Project" provides clear, unbroken audio. This condition is new, first occurring after I installed VideoStudio Pro X3 Fix for MLE Database Incompatibility with PaintShop Photo Pro X3. Since then, I have re-loaded VSX3 and all the patches but to no avail. Note: the same video files can be processed by Windows Live Movie Maker and the audio and video come out fine, even if the effects are primitive.
What devices are involved and their mode of connection?: NONE, files are either in the VS Projects file or in my Videos folder. The Version of program is being used: Video Studio Pro X3. Please list all patches/updates that have been installed relating to that version of the program. I've installed all three patches and updates available on the Corel site (thru the User to User board) plus any updates offered by Corel.
Details of the source files. Quick Time movie, 24 bits 1280 x 720, 1 video track, 1 sound track - sound track is MPEG-4, low complexity
Where did they originate: camcorder
How did they get onto your hard drive USB cable
Type of video: Quick Time Movie
Video data rate: 29.970 frames/second
Type of audio: MPEG 4 low complexity
Audio data rate: 48,000 KHz, 16 bit, Stereo
Project Settings: As the software was shipped. I haven't changed any settings.
NTSC
Did this error occur at the: EDIT step - but it continues in the SHARE step - except the sound goes completely away after processing. OR have you gone directly to the SHARE - NO
Error Codes NONE
I trimmed a wav audio file with the little yellow markers in the clip by placing the markers where I want them and using the scissors, then saved it, but when I drag it down to the timeline it comes down as the original long file.
View 2 Replies View RelatedI am using Photoshop CS6 on a Mac, OS 10.8.2. When I go to File/File Info... and look for the date a photo was created, I only see the time to the level of minutes. I need to know to the level of seconds. I believe earlier versions gave this information.
View 14 Replies View RelatedI'm doing' music and animation, but I want to place markers every few seconds, or consistently to the bpm. It would save me a WHOLE not lot, but ton, of time.
View 2 Replies View RelatedI imported my files from Premiere Pro CS6. I rendered in Premiere Pro prior to importing it to AE.
View 1 Replies View Relatedin an animation i need to increase and decrease a light's intensity by my audio.for example a violin's sound causes this about a spot light on violin player's head.
View 1 Replies View Relatedwhere i cant see the opacity( you know like 100% and so on) its the same with audio level, position, scale etc. here's a print screen of it [URL]
The reson why it dissapeared is because when i pressed L-L on my keyboard to show the audio waves, but instead i must have pressed something wrong or maybe the layer the layer want selected.
When I select a clip, it then goes to the start of the clip, how can I sop this happening and the clip stays in the same position when selected.
View 5 Replies View RelatedWhen I use the timeline everything goes from 00:00sec to 00:24sec then it gabs to 01:00 and so on.... Why is that and can I change it to use 60sec instead?
View 2 Replies View RelatedMy video studio pro x5 plays for 2 seconds and then stops in my timeline. This occurs after I've splt and deleted some audio and/or put in a transition. Here are my computer specs:
Brand: Dell Laptop
Processsor Intel(R) Cor (TM) i7 CPU Q820 #1.73GHz 1.73GHz
Ram: 8GB
System Type: 64 Bit Operating System
Pen and Touch: Pen and Touch is available through 80 touch points
I'm trying to replace the audio of a clip. I know I can easily delete the audio once it's in a sequence, but I'd like to replace the audio entirely so that the new audio is always on the clip as it's viewed in the project bins. You can edit in Audition for the clip, but thre doesn't seem to be a way to save the changes.
View 3 Replies View RelatedUsing VideoStudio X4. I Have a JVC VHS unit which captures video perfectly fine. It's connected via firewire from the JVC unit into a firewire 2 adapter and into the iMac. However I also have a Sony 8mm playerGV - D800E unit which plays back via the preview pain on X4 fine, but as soon as you hit capture, it runs for 9 seconds and stops and it does capture 9 seconds of footage. I've run the Sony unit with other apps and it works fine. Just with X4 I have issues with. Tried switching between DVD (array of differnt setting) and DV (Type1 and 2) but with no luck.
I also tried connecting the Digital Sony 8MM player via a video capture device (Canopus ADVC110), same result. It captures video for 9 seconds, VS stops capturing, and the player continues and play's back on the viewer in VS.