I am using Photoshop CS6 on a Mac, OS 10.8.2. When I go to File/File Info... and look for the date a photo was created, I only see the time to the level of minutes. I need to know to the level of seconds. I believe earlier versions gave this information.
View 14 RepliesI'm running VideoStudio X2...
Example:
Let's say that there is several seconds of a dog barking in one of my clips. The dog bark is a bit faint, so I need to boost the audio level of the dog barking. Can this be done?
I am using PSE10 and I have just upgraded from lion to mountain lion 10.8.2. Previously when I clicked "write keyword tag and properties info to photo" it seemed to just do that. Since the upgrade to mountain lion when I click 'write keyword tag and properties info to photo" it also changes the date the photo was created to the date the info was written to the photo .
How I can get it to write the keyword info *without* changing the date the photo was created?
I have a very fast PC (only takes about 6 seconds for Photoshop to start) but no matter if I open a TIFF or JPEG file, it takes about 7 seconds for the file to open (TIFF is only about 7 MB). It tried this with many different files on the local drive or the network drive and have the same results.
Interestingly, when using the Image Processor or the Web Photo Gallery, then the file opens in a split second. I have a 2nd PC running CS3 as well under XP and have compared Photoshop settings and everything is identical. The 2nd PC doesn't have any issues with these files.
I have even tried the suggestion to switch from a network printer to a local one - doesn't make any difference.
Autocad freezes for a few seconds every 30-60 seconds. it did this on my previous full autocad 2011 and now on 2012. i have also had a reinstall. it also does it on the other users computers in the office and also those on LT.
the freeze is rondom. it can be triggered by commands, escape button, panning arround the drawing. The problem occurs periodically for say 1 day every few days autocad will have pauses. But other days its fast with no problems.
i have tried all the usual things for slow down. purge, audit, layerdlgmode. I do not think it is general slow down.
I have photoshop Cs6 and I am trying to make an animation with an avi file that is about 4 seconds long. anyway when i import the avi file and it loads and the preview pops up and it shows half of my video has been cut off.
View 5 Replies View RelatedCamera Raw takes almost 2 seconds to save 103MB tiff file. (I use Photoshop CS6)When i save a bunch of tiff files, camera raw uses only half of my CPU and half of my RAM. In addition, I use SSD that writes 530MB/s outside Photoshop. According to these specifications it should save 5 images within one second. But it doesnt.
View 12 Replies View Relatedwhen i go to open or save a file in illustrator, the pop up box will only last 2 seconds? i just recently installed the new maverick osx but it was working fine yesterday.
View 1 Replies View Relatedfile info in Photoshop shows only an empty box yet works in bridge.
View 1 Replies View RelatedI used to be able to just open any image and my copyright info would be inserted into the file data. I guess it was a droplet, "when the file is opened or created then add file info from a xmp file". I still have the xmp file with all the data in but i am unsure how to implement it being automatically opened and added to the file when i create a new one? I thought i could handle it, i assume its a droplet of some sort.
View 5 Replies View RelatedAfter I save a file for "Web & Devices," when I open it, it returns this message, "This file contains file info data which cannot be read and has been ignored." Will this cause any problem with the file once I place it in the website I'm building? I've never seen this message before on a photo I've edited. The changes I made involved color correction.
View 9 Replies View RelatedWe have been sending images out to contractors, and sometimes when they come back the files are having this error:
the file contains file info data which cannot be read and has been ignored
When I then try to Photoshop Script the file info it throws errors.
I am using Autocad2014. I have had issues with two windows7 64bit machines where using the file open dialogue (network file) has an 8 second delay to open the file. If I open using recent documents(in cad) or windows file explorer to open them, there is no delay. Moving the file to the local machine stops the delay, but removing XREF's did not.
View 5 Replies View RelatedIs there a way to save my copyright info and contact info with a picture but NOT include the Camera Data.
View 2 Replies View Relatedwhen I save an image for web, all of the info that I have under "File Info" is lost.
who to make it so that the info remains?
And, not just certain fields, but all of it?
Trying to edit text in Photoshop CS3 file causes a crash - Tried on multiple PC's.File originally created in Photoshop CS6 with "Maximise PSD/PSB File Compatibility" set at "Always".
Document size A4, using Arial Regular. RGB. 8Bits. 72dpi
Colour Profile: sRGB IEC61966
Multi business licence for CS3 and CS6 Design Standard/Premium/Master Collection all on PC
Modifying the "file info" for a gif file (in my case, "General" tab, "Document Title" and "Description") doesn't actually get saved with the file - or, at least, if it is saved, it's not visible when re-opening the file.
I believe that I understood that metadata for .png format isn't supported, but I thought that .gif was. (Test case is easy: open .gif file, add a Title and Description, save, and re-open - information is gone).
I need to install a custom one that is working for CS5 and CS6, so that it can be seen and used in CC. But I don't know where to put it? (on the Mac)
for CS5 it goes here:
Main 3.0: /Library/Application Support/Adobe/XMP/Custom File Info Panels/3.0/panels/
User 3.0: /Users/[username]/Library/Application Support/Adobe/XMP/Custom File Info Panels/3.0/panels
for CS6 it goes here:
Main 4.0: /Library/Application Support/Adobe/XMP/Custom File Info Panels/4.0/panels/
User 4.0: /Users/[userName]/Library/Application Support/Adobe/XMP/Custom File Info Panels/4.0/panels
if there is a way to erase all of the file info in photoshop? Camera make & model, F stop, shutterspeed, etc.?
View 2 Replies View Relatedhow scratch files work in CS4?
- Scratch files seem to be created even in 64 bit Photoshop with plenty of unused memory, so they are apparently not regular swap/page files. What sort of data Photoshop CS4 writes to them and why isn't this information kept in memory instead?
- Do scratch file writes/reads occur at the same time as operating system paging? Is there any practical reason not to put PS scratch disk and OS paging file on the same physical drive?
- Do scratch files benefit more from higher bandwidth or faster seek time?
- What is the typical ratio for Photoshop CS4 for reads and writes to scratch files?
ok so Does anyone know how to change your File Info in photoshop... well I want to change the name of my Camera in it....
View 3 Replies View RelatedI am trying to adjust the noise level with the level tool but its not working. I move the arrows every which way see that it changes. I get it to were i want it them press ok and it only changes a little bit.
It become what it was in the preview. The level tool works when I add it as a new adjustment layer but I don't want like that I want to be able to copy the new level of noise I just made and can't if I add new adjustment. what should I do to fix this? O and this is the trial version and It wasn't working earlier with lots of other tool but i uninstalled it and now they are working except the level tool how I want it to.
In Photoshop CS6 extended,when exporting 3D file as an .obj (that has a material assigned to it), it does not create the material file - .mtl - only the .obj file is created.
Is there a setting I am missing?It works on another station, so I assume its a setting.
How to erase raw data in file info?
View 4 Replies View RelatedAs a digital art teacher I need to check the files my students submit for authenticity. I noticed that since the last 2 CS Suite upgrades the "File info" functionality is no longer available (File>File Info). When I open a student file and I select this option, a blank window appears. I cannot click out of it so I have to do a "Force Quit" and restart the application. I work with Photoshop and Illustrator. I need to be able to see who created the file and when the file was created. How do I restore functionality? Is there a plug-in I need now? I work on a Mac in CS Suites 5.1
View 5 Replies View RelatedI understand we no longer get thumbnails in file/open (apple and microsoft). But what happened to the detail panel for tiffs? I see it for jpegs (like who works with jpegs anymore). But not for tiffs. I have photoshop CS6 and am on Windows XP. I have the file/open function set for 'list.' I find setting it for anything else too cumbersome. And toggling bk and forth between file/open in photoshop and bridge is beyond cumbersome. How is this an improvement?
View 10 Replies View RelatedHow do I change the font used in the PS CS4 "File Info" dialog? The type on my Vista 64 machine is unreadable. All of the menus and everything else are okay; it's just this one dialog box. It's hard to keyword images.
The same dialog box on my Windows XP laptop looks fine, and I don't know why my desktop is using a different (inferior) font.
I'm renaming my image files from the original DSCF_1234 to say 11_1234 the 11 would be for player no 11 if i was covering a football match, what i want to know is, how i match the file to info in a database, & add that info to the image description.
View 6 Replies View RelatedIs there anyway to fill out a file info (description, author, author title, etc..) once and then apply and save it to multiple pictures?
View 2 Replies View RelatedI am just starting to use PS CS4. I am using a PC with Windows XP 64, 8 GB of RAM etc. The problem I am having is that when I try to add a caption to an image by going to File Info, I get a blank dialog box. It gives the filename at the top but just plain white blank inside the box. The same thing happens in File Info within Bridge. In the metadata panel in Bridge, I can see the metadata is there, including previous captions. But I cannot access them in File Info and I also cannot activate the caption within the metadata panel to edit the caption text.
View 3 Replies View RelatedWriting File Infoes i PSE 11, using a danish caracterset, looks OK at a first view, but reading the info in Irfan View is horrible.
Writing the same, using PSE 5, gives no problem. Can I change the characterset used i PSE 11 to that used i PSE 5?