when i go to open or save a file in illustrator, the pop up box will only last 2 seconds? i just recently installed the new maverick osx but it was working fine yesterday.
View 1 RepliesI have a very fast PC (only takes about 6 seconds for Photoshop to start) but no matter if I open a TIFF or JPEG file, it takes about 7 seconds for the file to open (TIFF is only about 7 MB). It tried this with many different files on the local drive or the network drive and have the same results.
Interestingly, when using the Image Processor or the Web Photo Gallery, then the file opens in a split second. I have a 2nd PC running CS3 as well under XP and have compared Photoshop settings and everything is identical. The 2nd PC doesn't have any issues with these files.
I have even tried the suggestion to switch from a network printer to a local one - doesn't make any difference.
Camera Raw takes almost 2 seconds to save 103MB tiff file. (I use Photoshop CS6)When i save a bunch of tiff files, camera raw uses only half of my CPU and half of my RAM. In addition, I use SSD that writes 530MB/s outside Photoshop. According to these specifications it should save 5 images within one second. But it doesnt.
View 12 Replies View RelatedI am using Autocad2014. I have had issues with two windows7 64bit machines where using the file open dialogue (network file) has an 8 second delay to open the file. If I open using recent documents(in cad) or windows file explorer to open them, there is no delay. Moving the file to the local machine stops the delay, but removing XREF's did not.
View 5 Replies View RelatedHow do I save an illustrator cc file to open in cs6? I get an error when I send the file to a colleague and they cant open it.It doesn't give me any options.
View 2 Replies View RelatedI've downsaved the file as an ai file for CS6 in CS7, however when I go to open it in CS6 it forces me to open each artboard as a separate file. How can I save it so the file will open normally?
View 4 Replies View RelatedI'm trying to create a script to save a file that is already open in the same directory with a different name.
Example: nome_0000_art to nome_0000_closed
I tried to create from another script that saves EPS but as I am new to the subject could not make it work
how do I perform the command saveas automatically without showing the dialog window by changing the file name?
I am just trying to save a PDF from my illustrator file. However, when I go to Save as, and select PDF, no dialog box opens to allow me to set how I want the file outputted. IF I just hit enter, the file does save.. its just like the Dialog box is hidden or not appearing. The reason I need the dialog box is because I need to add bleeds to the PDF and my default save doesn't do that.
View 3 Replies View RelatedI am currently working on the schematics of a quite big document and I am using Illustrator. I work on the .ai version of the figures but I want to save them in a very quick way as pdf files with personal setting (super compression, no preview...). What I am doing now is that I have my .ai file open, and when I want to save a pdf version of it I go to "File" then "Save a copy" then "Type: pdf" and I enter a name, I click on "Save" and a window pops up with some options. Here, I select a personal preset and then click on "Save pdf" and I am happy with the final saved pdf.
The thing is that it is a quite long process when you have to do it several times per figure. I tried to automatized it through a script (or action) but the available options are quite limited (it is hard to make Illustrator understand that if the current file is myfig.ai, I want a myfig.pdf and that I want to save it in the working folder). Under "File", I also tried the "SaveDocsAsPdf" script but once again, I have to select the folder where I want to save the figure and so on. Maybe I missed something. Any efficient way to save my figures as pdf by clicking a the F9 key (for instance).
I want to open a "Save File Dialog " with some default path.Like when user run that script I want to open a "Save As" dialog box with default path "/Volumes/<shared name>/<folder name>/.. ."I am using File.SaveDialog(prompt, filter);
but it doesn't open to the location by default that I want to open.
I have autocad civil 3d 2008 in my pc. From last 2 days I got a different problem i.e. when I am selecting open / save command from File menu graphical file select explorer is not opening just message in the command window . Previously I used to select files using graphical file explorer.
View 6 Replies View RelatedI'm having a problem throught CS6 with the Open, Save, or Save As dialog boxes not opening for a period of time after clicking on the desired functions. It can take over a minute just to get the Open dialog box up to browse for a file. Eventually, the dialog boxes open, but during the time that it's trying to open, the program is unresponsive. It is happening with all of my CS6 programs. I have unistalled and reinstalled with no fix. The programs are updated.
View 4 Replies View RelatedI have the student version of AutoCAD 2012 on an HP laptop with Windows 7 Home Premium OS. I originally installed AutoCAD in June of 2012. It worked fine for 9 or 10 months but now whenever I select File/Open, File/Save, or File/Save As, AutoCAD stops responding and the spinning blue donut appears. AutoCAD never comes back and I have to close it from Task Manager. I uninstalled AutoCAD and reinstalled it, and the process went smoothly. However I still have exactly the same problem with the File operations. I apply Windows updates, but other than that have not made any changes to the software on the laptop. AutoCAD works fine for everything except the File operations. I am able to save with CTL/S and am able to open AutoCAD files from File Manager.
View 3 Replies View RelatedI had photoshop CS4, and it's been working fine since I've gotten it, but yesterday I started having this weird issue. I open it, it opens fine, then windows tells me photoshop has stopped working. I've restarted, re-installed and tried over and over, but it won't stay open for longer than 5 seconds. My mother gave me CS6 to replace CS4.
View 1 Replies View Relatedif i need to rename or change anything in the iproperties of ipt, im doing it from the vault.my problem is that, when i change something in iproperties of an ipt thru vault, i have to open the idw to update it.
as most of the iproperties in ipt shows in the idw.
its easy to change the properties in vault. but its deleting its purpose if i have to each idw to make sure i have the updated idw.is there a code where i can open all idw and save the same file and checking to the vault automatically?
Civil 3D 2013.One of the problems my team has is that we have a number of remote offices that all work on the same drawings. To ensure integrity of the drawings, we use a Wide Area file replication and locking service to ensure the files do not become out of sync and corrupted between offices.
AutoDesk seems to open and save files and their subordinate xrefs serially in a single thread instead of in a multi-threaded manner. Because of this there is a Huge time impact on just opening and saving files at remote sites as a result of Civil 3D having to wait for the home office file lock check on each and every file before opening the next file.
We have 100Mbit down / 20Mbit up transmission links at both sites dedicated to the file replication, with Gbit backbone in both offices.
note that the remote site has a full copy of all files in its replicated share. These local files are what Civil 3D is opening. No Files are being transferred during file open unless a remote change has just occurred (proven through replication logs).
When the drawing file is opened for editing, a file lock check is performed and Windows waits for the response to ensure it can be opened for editing before telling Civil 3D. When Civil 3D has this file open, it has a list of all the xrefs for this file. Civil 3D then seems to open each file in sequence.
This is a problem when a large latency is introduced through our 3rd party Wide area file system by a remote site file lock check.
This is not AutoDesk's fault but the compounding of the two system's operational behaviours, causing a Very long wait on file open, Save, PaperSpace operations (30 minutes for large drawings).
I would like to see a multithreaded (threadpool) file open occur against the entire list of xrefs (during save as well). Then recursively executed for all subordinate xrefs of those files until the operation is complete.
As long as a file list is maintained during the operation and updated as each file operation completes (which obviously it is) in the primary thread, this should not cause any problem. All dependancies can be opened in sequence once the initial file operations are complete and when a particular file in the list is required but not open yet, it's priority can be raised in the threadpool.
Autocad freezes for a few seconds every 30-60 seconds. it did this on my previous full autocad 2011 and now on 2012. i have also had a reinstall. it also does it on the other users computers in the office and also those on LT.
the freeze is rondom. it can be triggered by commands, escape button, panning arround the drawing. The problem occurs periodically for say 1 day every few days autocad will have pauses. But other days its fast with no problems.
i have tried all the usual things for slow down. purge, audit, layerdlgmode. I do not think it is general slow down.
I've seen a lot of posts on this subject, so rather than replying to a specific one that may be on a different trail, I decided to open a new discussion. Lately I've had a lot of problems saving a file while in photoshop cs6 and getting this error. Sure, I can do a save as then delete the former file, but that doesn't solve the problem.
Since it happens so often, I want the solution. Since the only application I have running when I get this error is Bridge, I closed Bridge when I got this error, and then I could save the file. In some of the discussion threads on this problem, I did see some reference to previews.
I suspect this has to do with Bridge building previews or extracting previews or something related behind the scenes. I will keep monitoring this situation to see if closing Bridge always takes care of this problem. However, I never had this problem before, if some of the latest updates created a new problem. I run Windows 7, and all the latest releases of ACR,
I am getting this error every time I try to: a) either open a file; place another file into existing open file; etc.Also, I can not save files, because after I go to File - Save or File -Save as, the screen I am supposed to use to save my files open and closes 1 second later.
I deleted Photoshop CC, re-start my Mac, install CC again, and nothing.
Started to use PhotoShop CS4.I use Canon DPP for preprocess then bridge to PhotoShop in TIF format. I occasionaly want tosave in JPG format rather than TIF to give the file to my friend. However, there is no option tosave in JPG in "File/Save in other name/" function.Could a guru help me how to do this.If a file was in jpg when opened, it can be saved in jpg, though.
View 5 Replies View Relatedi can't open or save bmp file in my CS3 extended. It is saying that is impossibile operate the request cause the file type is wrong.
Even if i try to save a total new and blank work does not allow me save in bmp ( the option is even not shown!)
I guess some update has screwed up the configuration but i don't now who to solve it.
I use photoshop cs3 extended
Ex. I open photoshop cs3 extended --> create file --> make file ---> save ---> close
but later I can`t open save file!
Since some updates ago Illustrator CC hangs every few seconds. It is hard to work with it. It seems the problem occurs only with files where other files placed/included. Illustrator is reading data from the network, every few seconds.
All my files are on a Synology NAS. Just I have setup a complete clean new system. No changes. The problem is still there.Using a PC with a 3.5G i7, 32GB Ram.
I have CS6 installed on a Mac Pro desktop, 3.3 Ghz machine, 6 Gb RAM, running OS X Mountain Lion. Everything is running fine, updated and it's a great machine. But I've noticed that opening Photoshop files that are somewhat large and layered take WAY too long to open or "save." I mean...3 minutes is much too long to wait.
I have a spare physical drive configured (in preferences) for extra RAM, with plenty of empty drive space. The startup drive has well over 250 Gb of space remaining.
The only applications running are Photoshop and Bridge. There is 6 Gb of RAM to run these applications and open files. OpenGL is checked in Preferences and I'm running an nVidia graphics card, as well.
I'm a photographer, and I do a lot of editing in Photoshop.
One time my computer's OS crashed, and it's an emergency to finish my work within the morning, so I took my harddisk and went outside to look for public computers.
Since my file is copyrighted and private, I was afraid that my PS files we're copied over the network and viewed after I left the computer shop.
Is there any options or plugins that we can use, to set and open the PS file in the photoshop program with password protection [or encryption]?
So we can, atleast, have confidence when bringing these files anywhere...
Getting a lot of this recently, when I try to save or close file.
"could not save the file.. it's already in use or was left open"
Don't remember seeing this so much. What does it mean, I'm screwing up?
When I open an image in Photoshop CS3, an open box appears and I have selected my image, but when I click the Open button, an error message comes out that says "could not continue with the open command because two or more files were selected for opening at once". So I clicked the OK button and then I could not click all buttons even Close button. I still have to press CTRL+ALT+DEL to close or I have to restart the whole PC.
View 1 Replies View RelatedWhen I use file open|save|save as in CS3 using the _Adobe_dialog_ the path always goes back to the root directory rather than the last one I used.
View 1 Replies View Relatedi'm having a problem with maya 2011 , i can't open some file and sometime the program don't save and an error message appear saying i "maya could not save", i've got to send my work next saturday and i'm desperate now .
View 1 Replies View RelatedI would like to be able to save all open Illustrator files at once.
For example: I am working on a series or collection of designs. Each design has multiple artboards in it that make the files rather large. I am making minute changes to each one that require grunt work. I would like to be able to open 10-20 files at a time, copy and paste the chagnes i need, hit Save All and walk away. So is there a way: a command, a script, something that does this?
Is there a way or a script to save all open files in Adobe Illustrator?
View 5 Replies View Related