Photoshop :: File Takes 7 Seconds To Open In CS3...
Sep 23, 2008
I have a very fast PC (only takes about 6 seconds for Photoshop to start) but no matter if I open a TIFF or JPEG file, it takes about 7 seconds for the file to open (TIFF is only about 7 MB). It tried this with many different files on the local drive or the network drive and have the same results.
Interestingly, when using the Image Processor or the Web Photo Gallery, then the file opens in a split second. I have a 2nd PC running CS3 as well under XP and have compared Photoshop settings and everything is identical. The 2nd PC doesn't have any issues with these files.
I have even tried the suggestion to switch from a network printer to a local one - doesn't make any difference.
View 5 Replies
ADVERTISEMENT
Jun 10, 2013
Camera Raw takes almost 2 seconds to save 103MB tiff file. (I use Photoshop CS6)When i save a bunch of tiff files, camera raw uses only half of my CPU and half of my RAM. In addition, I use SSD that writes 530MB/s outside Photoshop. According to these specifications it should save 5 images within one second. But it doesnt.
View 12 Replies
View Related
May 18, 2012
I've been generally having trouble with Civil 3D 2012 taking a long time to do tasks. One that takes quite a while is if I drag a Cogo Point Label. As stated it takes about 75 seconds. It will move to where I drag it immediately but then the program is unresponsive for a minute and 15 seconds.
In the past 4 days I've repaired C3D, tried 4 or 5 different versions of the display driver and did a windows update. A lot of commands, specifically Civil 3D commands, are very slow. Does this ring any bells?
Civil 3D 2012 with SP (Update) 1
NVIDIA Quadro FX 4600 768MB GDDR3 (Tune log reports 2530 MB)
Driver 8.17.0012.9670
View 9 Replies
View Related
Oct 24, 2013
when i go to open or save a file in illustrator, the pop up box will only last 2 seconds? i just recently installed the new maverick osx but it was working fine yesterday.
View 1 Replies
View Related
Sep 6, 2013
I am using Autocad2014. I have had issues with two windows7 64bit machines where using the file open dialogue (network file) has an 8 second delay to open the file. If I open using recent documents(in cad) or windows file explorer to open them, there is no delay. Moving the file to the local machine stops the delay, but removing XREF's did not.
View 5 Replies
View Related
May 11, 2010
I am having trouble opening up cdr files as they take very long time to open (around 20-25 min per file of 5-10 MB).
Following are my system specs:
>Intel Pentium 4 - 3GHz, 2 GB RAM,
>Windows XP SP2
>Coral Draw X3 installed
I have already tried deleting unnecessary fonts, views and color styles. I also restored corel to factory defaults (using F8 key at start up) but some cdr files still take a long time to open.
View 7 Replies
View Related
Dec 23, 2011
I have user parameters that are no longer needed and are not being used anywhere. They each takes 4-5 seconds to delete, prior to 2012 this would happen instantly.
IV2014 SP1 64bit
Dell Precision T7500, Geforce GTX 480, DirectX11 306.97
SpaceExplorer 4.04, 3DxWare 3.12.2
Twin Intel Xeon E5506 2.13GHz, 12GB RAM, Win7 Pro SP1 64bit
View 6 Replies
View Related
Aug 27, 2011
I have CorelDRAW X4, when I open some file(s), which takes long time to open, even which file size is smaller or bigger.
View 1 Replies
View Related
Jun 16, 2012
I had photoshop CS4, and it's been working fine since I've gotten it, but yesterday I started having this weird issue. I open it, it opens fine, then windows tells me photoshop has stopped working. I've restarted, re-installed and tried over and over, but it won't stay open for longer than 5 seconds. My mother gave me CS6 to replace CS4.
View 1 Replies
View Related
Sep 25, 2013
Installed Elements 10 on Win 7 64 bit laptop that is plenty powerful.Created a shortcut to launch Elements directly from the directory it installed in. It can take several minutes to open, if it does. Have tried Run as Admin, no difference. Sometimes nothing happens and I have to try several times to get it open. Once open I went to Preferences and turned off all Media Analysis, and all Third Party things and anything else that might be slowing it. Only imported about 50 files into the album, and it still takes so long to open I can't tell it is even trying.
View 7 Replies
View Related
Sep 6, 2013
I made a Photoshop® script (action) which works perfectly. (Open .PDF files in Photoshop®, to after save them as .JPG files into another folder)
The problem comes when I launch a batch process. It takes a while to the computer to open the large .PDF files, and when a file is opened, well it doesn't go through the whole script. In fact, Photoshop® already open the second file and so on. Then without running the rest of the script/action .
View 2 Replies
View Related
May 28, 2012
Autocad freezes for a few seconds every 30-60 seconds. it did this on my previous full autocad 2011 and now on 2012. i have also had a reinstall. it also does it on the other users computers in the office and also those on LT.
the freeze is rondom. it can be triggered by commands, escape button, panning arround the drawing. The problem occurs periodically for say 1 day every few days autocad will have pauses. But other days its fast with no problems.
i have tried all the usual things for slow down. purge, audit, layerdlgmode. I do not think it is general slow down.
View 9 Replies
View Related
Jul 11, 2013
I have photoshop Cs6 and I am trying to make an animation with an avi file that is about 4 seconds long. anyway when i import the avi file and it loads and the preview pops up and it shows half of my video has been cut off.
View 5 Replies
View Related
Dec 31, 2012
I am using Photoshop CS6 on a Mac, OS 10.8.2. When I go to File/File Info... and look for the date a photo was created, I only see the time to the level of minutes. I need to know to the level of seconds. I believe earlier versions gave this information.
View 14 Replies
View Related
Mar 4, 2012
I recently installed Corel paintshop pro x4 in my computer and when I go to open it, it takes a long time for it to open. My mouse keeps spinning. When I first installed it, everything worked fine. I added a couple of plug ins. Should I uninstall paintshop and re-install? If so, would I lose the plug-ins?
View 8 Replies
View Related
Sep 11, 2012
Got this Problem since 16.0 to 16.0.1 update. I´m working on a MacPro with OS X 10.6.8.
View 3 Replies
View Related
Oct 20, 2011
We have a data folder on the server mapped as network drive to the clients. The data folder contains all cad data stored from productstream professional.
Due to an over 10 year old environment the data folder contains a huge amount of cad files, library parts, iParts and so on.
Due to historical growth of the environment there are some missing parts (not available on the file system anymore), because they were deleted, are corrupt, and so on. At the root of the data folder there is located the typical cmpinv11.ipj inventor project file.
If you open an assembly either from productstream or via inventor (without productstream) directly from the data folder and the assembly has an unresolved child component because the file isn't there anymore it takes a very very long time until the dialog box for unresolved link comes up (waiting time several minutes 1...10min). Once reached this point one can skip and repair the assembly, of course.
But the question is, how to speed up the time for getting the unresolved link dialog?
The network connection itself is quite OK und the project file itself is also OK. The project file list of every user is pretty small (only cmpinv11.ipj and some standard ipj's).
We think inventor internally scans the whole project-file folders to ensure that the component is really missing but due to the huge environment this takes many minutes and is annoying.
Any bypass for that? Is it possible to apply a temporär setting before opening a potential inconsistent assembly? Or is there a setting like skip unresolved components by default or by a defined timeout?
Because it is Inventor 2010 (Productstream PRO 210) there is no File open Option Auto-Skip unresolved components (like in 2012) but even if it was I guess it wouldn't reduce the time to get the dialog either.
View 2 Replies
View Related
Jul 25, 2013
Have open a old max scene. And it take a very long time to save. That can have multiple reasons. Found a new (for me):
My old scene has a "render output" path to a no longer exists netzwork drive. This slow down max on save. Don't know why max access the output path on save ;( Slow down is also the Assert Tracking dialogue and "Render Output/Files..." Dialogue... Maybe max always tries to access the not existing network drive, every time ;(
View 1 Replies
View Related
Mar 1, 2011
I have autocad civil 3d 2008 in my pc. From last 2 days I got a different problem i.e. when I am selecting open / save command from File menu graphical file select explorer is not opening just message in the command window . Previously I used to select files using graphical file explorer.
View 6 Replies
View Related
Jan 21, 2009
I am unable to open files from the file "OPEN". I can open from Bridge or open recent document, but not from just File, Open.
My operating system is Mac OS X.
View 3 Replies
View Related
Jun 17, 2013
I successfully updated Photoshop to the new CC version, but when I launch it I go through the splash screen, then everything seems OK, but after a couple of second it crashes and quits.
I tried repairing permissions, etc. but no luck.how can I get it to work?good thing I didn't uninstall the CS6 version, so I can continue using it.
View 20 Replies
View Related
May 19, 2012
When I first installed Adobe Photoshop CS6 I was unable to run Photoshop or Bridge CS6. Photoshop would give me an error about "could not open a scratch file because the file is locked. If I ran either of these programs as an administrator they would run without issue, this led me to believe that there was a permission issue somewhere. After some digging I found out the both Bridge and Photoshop try to create a temp file (similiar to Photoshop Temp2777223910092) on the c: drive of the computer. In my case the user that I was logged in with did not have access to write to the root of the C: drive. Note that you run the program as the administrator and change the scratch disk location as that changes the preference for the administrator user and not the user that you are currently logged in as.
I first had to give the user that I was logged on with write permissions to the root of the C: drive. Next try and run Photoshop, you will get an error another error about the scratch disk and about and invalid or missing setting file. To correct this you need to have run Photoshop as an administrator, next you can go to Users AdminAppDataRoamingAdobeAdobe Photoshop CS6Adobe Photoshop CS6 Settings and copy Adobe Photoshop CS6 Prefs and/or Adobe Photoshop X64 CS6 Prefs to Users<your logged in username>AppDataRoamingAdobeAdobe Photoshop CS6.Adobe Photoshop CS6 Settings.
View 93 Replies
View Related
Jul 15, 2013
Everything I read says its version 6.4, but when I attempt to run the 6.4 patch I get the message that it does not apply? Has Adobe prevented PSE7 from opening .NEF files from the D5100 (without conversion) in an effort to force paid upgrades to the current PSE version?
View 4 Replies
View Related
May 30, 2012
I am trying to open a video to edit within Photoshop CS6 x64. I am getting the following message:-
Could not place the document ‘IMG_1664.MOV’ because no parser or file format can open the file.
The video was shot on my iphone 4S and ive even tried converting to other formats yet Photoshop still gives the same error. I have checked through Bridge and I have no option to send to Photoshop on the right click menu. try out the new features of CS6 for video editing.
I am running a 27" iMac with 12gb RAM and 1gb of Video RAM.
View 8 Replies
View Related
Nov 19, 2012
Getting this error when trying to use downloaded ACTIONS. "Could not place the document ‘Photoshop_Actions_03_by_ReehBR.atn’ because no parser or file format can open the file."
View 2 Replies
View Related
Feb 26, 2012
My CS5 keeps closing seconds after I open it. I don't even have to try and open a file. It just closes down. No warning, no errors, nothing! It was working fine two days ago. I'd rather not be forced to uninstall as I've got effect plugins that I use and that have custom settings.
View 8 Replies
View Related
Mar 29, 2013
How can we extend the timeline duration to more than 10 seconds in Photoshop cs6 extended for a 3D object layer? It seems you can not make it longer than 10 seconds. Other layers can be made longer.
View 8 Replies
View Related
May 24, 2013
My Photoshop Elements freezes up after 30 seconds to 3 minutes of use. What can I do to fix this?
View 2 Replies
View Related
Feb 6, 2013
In Corel draw, I click file, open, and the location is not the folder I want. I have created shortcuts. How to change this.
View 3 Replies
View Related
Jan 27, 2006
How can I import the contents of an image file into an already open file? I want to import the WHOLE image, not just a cropped version.
View 1 Replies
View Related
Jan 21, 2013
I am able to run CS6 when I login Admin, so i change scratch file location to D:. After restarting PC, login by Admin, I can run CS6. But I still can't run CS6 when I login by other account, I think the location of scratch file is per user setting.
View 3 Replies
View Related
