I'd like to fade the audio from 100% to 50% over a period of time as opposed to a hard cut in volume. Any trick for doing this smoothly (besides cutting it into 50 individual chunks and manually doing it)?
View 1 RepliesWhen using the audio fade in and out to activate the fade should the bars be highlighted or dimmed? I don't seem to hear any difference between them. (Vid pro x4)
View 2 Replies View RelatedI have some audio tracks and I'm trying to use the fade in/fade out but I can't get either to work. I have the duration in preferences set to 7 seconds but it still does not fade in/out.
View 3 Replies View Relatedhow I can slow down the audio fade in and out in VS X5? It seems to be a fixed function, am I wrong? I'd really like to slow down one particular audio clip so it fades in and out more slow but I don't know how!
View 1 Replies View RelatedHow to fade the volume out completely at the end of a audio clip. I have read the manual on the subject and have tried to follow the instructions that it gives. Until now I have not had any success. I know that I am missing something I just don't know what it is. I would like the audio to fade out completely so that I can fade in to another audio clip. I have clicked the fade out tabs but the volume only decreases a little at the end of the clip.
View 7 Replies View RelatedThe audio level controls seem to bottom out before the sound has zeroed creating audio leakage from tracks set to minimum. -36db is not zero. It would sure be nice to fade out an audio track and have it be silent.
View 6 Replies View RelatedI've edited with VideoStudio 7, 10, 11, X2, X3 and X4 and just switched to X5. An issue that I experienced (and resolved) early in my use of VS Pro X4 has now resurfaced with VS Pro X5 and I can't recall how I "fixed" the issue last time.
My main video track is in its usual spot on the top row of the timeline (in Timeline View). Ripple editing is enabled. When I use the scissors to manually split the main track at any point, an audio fade-in is automatically applied to the trailing clip after the split. At the same time, the audio levels on both the leading and the trailing clip (before and after the split point) are instantly reset to 0 db. This is particularly maddening when I've carefully re-adjusted my main track's audio levels before applying the split.
why my audio level in my clips diminishes when imported into X4? The level is fine when the un-edited clip is viewed in Windows Media Player but is significantly lower in X4 when viewed in "Clip Mode" and even lower in "Project Mode".
I've raised the audio level as high as 500% but it's just not the same level and quality as actually recorded.
I've attached the properties from a short clip.
I'm still struggling with getting this long ago purchased and registered version working properly on my XP Media Edition, installed on an 4 year old Toshiba laptop with an external NAS hard drive. (Additional future system details to be provided as is necessary.)
I had no problems with the previous version 10 on this system, or version 11 on another system, but the X2 version has been a long outstanding headache in attempting to reach a working status. I'd be more than willing to again upgrade, but only if I had assurances that I wouldn't have to reset the clock. My editing needs are very basic, so additional enhancements offer no benefit beyond bug fixes and patches.
Corel's technical support eventually resolved one frustrating X2 operational problem in setting up a separate VSP user profile with all working files, not just the program files, needing to reside on the local drive, not the NAS. (That's something that should be documented properly somewhere, if not already in this forum as I extensively searched at that time for a reference and found none.)
My current problem is that audio coming out on burned DVD's is very faint. The input is occurring with a .mpg video file and it's enclosed audio voice track.
I have tried the volume control without success, plus the mute function. The problem is that the sound level is not muted, just very faint as to be almost unheard even when played back on the DVD player at maximum volume.
I have tried extracting that .mpg audio track in VSP, saving it in both .mpa and .wav formats, then reinserting into the time line, but the result is the same. It's still very faint. However, if I use one of the sample .mpa audio files found in VSP it burns through to a DVD in the normal manner. This works, even when accompanied by the video audio which still comes out so faintly.
The volume level plays normally in VSP and VLC from the raw file, as well as from the burned DVD. It's when the burned DVD is placed in a regular DVD player that the problem shows up. I've used the same input file source for editing and burning in VS 10 and 11 with no similar problems.
I've searched the web, this bulletin board and consulted with a movie editing professional before posting this message. I'll be continuing my exploratory approaches, first with another entirely video input source and also with another DVD player, plus anything else that comes to mind but my options are becoming limited.
I have several movie clips I want to turn the volume down to the same level. I don´t want to do it one clip at a time. When I select multiple clips, the sound level bar turns gray and I can´t change the level.
View 3 Replies View RelatedI'm running VideoStudio X2...
Example:
Let's say that there is several seconds of a dog barking in one of my clips. The dog bark is a bit faint, so I need to boost the audio level of the dog barking. Can this be done?
How can I reduce the audio volume for all the clips in the project? The original sound from the video clips is just ambient noise. I want to reduce it all by the same amount throughout the project, so that the music I put on the music track will be easier to hear, with the ambient noise being only a soft background. I can't find any control that lets me change the volume for all clips at once, and the documentation isn't very clear.
View 8 Replies View Relatedwhen I split an Avi file I have, if I have the clip selected and highlighted, I get audio. If I click on the time line, so no specific clip highlighted, I don't get any audio?
If I create a file, the produced file has no audio
can simple fade into slow motion or fade out of the effect ?
View 5 Replies View Relatedwhere i cant see the opacity( you know like 100% and so on) its the same with audio level, position, scale etc. here's a print screen of it [URL]
The reson why it dissapeared is because when i pressed L-L on my keyboard to show the audio waves, but instead i must have pressed something wrong or maybe the layer the layer want selected.
I have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
I needed a second audio file and created a layer and placed my video file that has the audio I want in that layer. I edited the audio in that layer and now I want to save the result as an audio file.. preferably an MP3 file. How do I select a specific layer and save just that layer as an audio file?
View 2 Replies View RelatedI started a Premiere Pro CS5 project on my PC at work. Video files played both audio and video, life was good. Unfortunately my PC at work is slow, so I want to continue working on the project on my home PC. Uploaded the needed files with Sugarsync, went home, but when I open the project here all the video files only play audio.
So I know the files CAN display video, so it must be something to do with my home computer and CS5 install? I tried reinstalling PP CS5, no change. Is there a setting I may have accidentally disabled at home to force audio only?
I have a nicely edited series of videos fading into each other in the video track, and would like to have a series of photographs fade in and out in the overlay track. Fade to Black or dissolve dont achieve the affect I want where we can see the underlying video between photos.
View 5 Replies View RelatedWhen using fade to black in the options panel there is an option to select color. So I could use fade to white etc i spose. This option is grayed out though. how I can activate this?
View 2 Replies View RelatedI see all kinds of effects / transitions for fade to/through black, but not white. (I'm sure there's some quick way to select a color or something, but I can't find it.)
View 5 Replies View RelatedI have VSX3 and will upgrade to VSX4 if this will be better for my for this request. I want to be able to do a fade in and Fade out of two videos. Is this possible. Videos were shot on a 5DMk2 as Mov. files 25fps 1920x1080 and are of a Morning shot and a Day shot. Shot on a tripod, same position and lens. Motor driven pan both at same speed, direction and overlapped for a transition of the two to make an approx. 20 sec video.Want to make a HD DVD, Pal.
View 1 Replies View Relatedi am using video studio since its 8 version. now testing the trial version of x4. but a very useful editing tool, i think, missing still now. that is video editing fade in fade out manually in the timeline. its possible to do this in audio. but is it possible in case of video. many other video editing soft. do this. but why corel still not updating in their package?
View 6 Replies View RelatedI'm just about ready to buy Corel Studio Pro X5, but one "issue" is bothering me, I cannot fade in and out the overlay track. I can drag the cross-fade onto the image or video, but it doesn't cross-fade with the actual video. Instead, the screen suddenly goes black and the overlay track fades in. Same on the way out, it just fades to black (queue the music ) and then the underlying video pops back in.
I'm using the 30-day trial Video Studio Pro X5.
I have inserted a .wav file I split from another video, to use as a background sound at the first and end of my project while the credits come up. I want the sound file to fade in and fade out at start and finish. The 2 fade in/out buttons work, but, fading seems to go from 0 -60mph in a .5 seconds.
So, is there away of stretching the fading at each end of the file?
I'm a new user for Pro X4. Can you add a fade to a title? I don't see it in the option tab.
View 3 Replies View RelatedI haven´t used VS X3 for a while... everything as fine. Recently I used it again, and it happened that the fade-in/fade-out buttons (in the video edit group of controls) for the overlay clips do not work. Even though I select them to enable the fading, the overlay video starts without any fading.Is there any special setting somewhere that can change the behavior of these buttons. Also the rotating fade in/out does not work ay more.
View 1 Replies View RelatedOn top of my first video, I just did another Elkhound video.
[URL]......
But, I couldn't figure out how to get a certain effect I was wanting to use. Basically, at the 2:34 mark there is a picture of a lady kneeling down petting a puppy. The very next picture is the same lady with the same dog as an adult. I was trying to get the second picture to fade into the screen and the first picture fades out. So they kind of "morph" if you will. I assume that's possible - but I am just to new to the program to figure it out.
In my latest video, I have inserted several different music tracks but they vary in volume. Is there any way one can make all inserted tracks an identical (or similar) volume level?
View 1 Replies View RelatedI'm trying the demo version of MotionStudio 3D. So far it looks very powerful and much easier to use than Graffiti. It allows you to export a project directly to the timeline in Video Studio. I wanted credits superimposed over another scene and I wanted the credits to fade in and fade out. So I put the exported titles onto track 2 in VS. I set the allignment options in VS to "fit to screen." The middle part of the clip where transparency=0 looks great. But the beginning and end, where transparency=100, instead of the title being disappearing, it turns black.
If that doesn't work, is there a way I can use VS to accomplish the same fade-in / fade-out of something on track 2? You can specify transparency for the clip on track 2, but that appears to be just one value for the entire clip, not something you can modify with keyframes.
Trying to edit an 8 to 10 second fade from black to a clip.
The closest I can get is this: Black color, Crossfade Transition, Video Clip This would work, but transitions are limited to 3 seconds.
Also, is there a way to freeze a video for a defined amount of time? I know inserting a capture of the last frame as a still image would work, but seems like a bit of extra work.
Video Studio Pro X4.