VideoStudio :: Canon MOV Files For Fade In And Out
Jan 5, 2012
I have VSX3 and will upgrade to VSX4 if this will be better for my for this request. I want to be able to do a fade in and Fade out of two videos. Is this possible. Videos were shot on a 5DMk2 as Mov. files 25fps 1920x1080 and are of a Morning shot and a Day shot. Shot on a tripod, same position and lens. Motor driven pan both at same speed, direction and overlapped for a transition of the two to make an approx. 20 sec video.Want to make a HD DVD, Pal.
View 1 Replies
ADVERTISEMENT
Jan 4, 2012
I started with V6. Currently using trial of X4. Got a Canon T2i for Christmas....mostly for HD video. Never have worked with HD video before so not real familiar with file extensions etc. However I do know that HD video is a different animal altogether…..Very large files and some program issues.
Took some test video in 1080p… about 30 seconds. Files are in MOV format. Drop the file in program and hit play on the preview pane. Very choppy and stuttering. Make sure smart proxy is enabled and it is. I then save the file as a 1080p AVCHD. Now…. that file plays just fine in the preview pane. Another thing I tried was converting the MOV file into an AVI with a free program called Pazera Free MOV to AVI. That conversion with an AVI extension also had the choppy issue. Should I convert the files first from MOV to AVCHD or is there another HD format that is better?
View 6 Replies
View Related
Dec 9, 2010
I have some Quick Time "MOV" files from a Canon S95, and Pro X3 won't accept them. I want to convert them to something that will be accepted and edit. What is best? WMV or something else.
View 2 Replies
View Related
Mar 21, 2013
can simple fade into slow motion or fade out of the effect ?
View 5 Replies
View Related
Oct 7, 2010
I went from DV, to AVCHD earlier in the year. I had no luck at all getting one smooth render using AVCHD from my Panasonic camcorder. So when I bought my Canon 5D MKII I thought the HD files would be easier/better to work with. I have edited together some files just for tests with and without crossfades, but both have either resulted in shakey/jerky footage, or the program crashing saying 'send the dump file to Ulead for analysis.
Basically I perform smart proxy to shrink the files to make them smoother to edit, then when I try to render to .mov again, the footage is jerky, but then I can rerender to mpeg2. The problem is that the mpeg2 footage is only about 95% smooth. It will be flowing along then every 5-10 seconds there will be a jump. If I try to render straight to anything else - mpeg2, H.264, MPEG4, it just crashes after 3 seconds giving the same dump file message.
The files the camera produces are
1920x1080 quicktime (.mov)
25fps
48,000KHz, 16 bit, stereo
My hardware is
Sony Vaio laptop
Intel Duo Core 2.2ghz
Windows 7 home premium
64 bit
4GB Ram
Ulead version Pro X3
I have downloaded all the latest patches, and I downloaded the latest Directx (I'm not sure what this is, I just followed the link on the forum for the June 2010 one; is it an automatic thing?)
So I have a decent computer, and fantastic camera, and Ulead's top program - why can't I get a smooth end file??
View 14 Replies
View Related
Jun 8, 2011
When using the audio fade in and out to activate the fade should the bars be highlighted or dimmed? I don't seem to hear any difference between them. (Vid pro x4)
View 2 Replies
View Related
Apr 11, 2013
I have a nicely edited series of videos fading into each other in the video track, and would like to have a series of photographs fade in and out in the overlay track. Fade to Black or dissolve dont achieve the affect I want where we can see the underlying video between photos.
View 5 Replies
View Related
Sep 18, 2012
When using fade to black in the options panel there is an option to select color. So I could use fade to white etc i spose. This option is grayed out though. how I can activate this?
View 2 Replies
View Related
Dec 6, 2011
I see all kinds of effects / transitions for fade to/through black, but not white. (I'm sure there's some quick way to select a color or something, but I can't find it.)
View 5 Replies
View Related
Nov 2, 2013
I have some audio tracks and I'm trying to use the fade in/fade out but I can't get either to work. I have the duration in preferences set to 7 seconds but it still does not fade in/out.
View 3 Replies
View Related
Jun 4, 2011
i am using video studio since its 8 version. now testing the trial version of x4. but a very useful editing tool, i think, missing still now. that is video editing fade in fade out manually in the timeline. its possible to do this in audio. but is it possible in case of video. many other video editing soft. do this. but why corel still not updating in their package?
View 6 Replies
View Related
Dec 17, 2012
how I can slow down the audio fade in and out in VS X5? It seems to be a fixed function, am I wrong? I'd really like to slow down one particular audio clip so it fades in and out more slow but I don't know how!
View 1 Replies
View Related
Nov 5, 2012
I'm just about ready to buy Corel Studio Pro X5, but one "issue" is bothering me, I cannot fade in and out the overlay track. I can drag the cross-fade onto the image or video, but it doesn't cross-fade with the actual video. Instead, the screen suddenly goes black and the overlay track fades in. Same on the way out, it just fades to black (queue the music ) and then the underlying video pops back in.
I'm using the 30-day trial Video Studio Pro X5.
View 11 Replies
View Related
Jan 13, 2013
I have inserted a .wav file I split from another video, to use as a background sound at the first and end of my project while the credits come up. I want the sound file to fade in and fade out at start and finish. The 2 fade in/out buttons work, but, fading seems to go from 0 -60mph in a .5 seconds.
So, is there away of stretching the fading at each end of the file?
View 6 Replies
View Related
Sep 13, 2011
I'm a new user for Pro X4. Can you add a fade to a title? I don't see it in the option tab.
View 3 Replies
View Related
Jul 6, 2011
I haven´t used VS X3 for a while... everything as fine. Recently I used it again, and it happened that the fade-in/fade-out buttons (in the video edit group of controls) for the overlay clips do not work. Even though I select them to enable the fading, the overlay video starts without any fading.Is there any special setting somewhere that can change the behavior of these buttons. Also the rotating fade in/out does not work ay more.
View 1 Replies
View Related
Sep 2, 2013
On top of my first video, I just did another Elkhound video.
[URL]......
But, I couldn't figure out how to get a certain effect I was wanting to use. Basically, at the 2:34 mark there is a picture of a lady kneeling down petting a puppy. The very next picture is the same lady with the same dog as an adult. I was trying to get the second picture to fade into the screen and the first picture fades out. So they kind of "morph" if you will. I assume that's possible - but I am just to new to the program to figure it out.
View 2 Replies
View Related
Dec 22, 2010
How to fade the volume out completely at the end of a audio clip. I have read the manual on the subject and have tried to follow the instructions that it gives. Until now I have not had any success. I know that I am missing something I just don't know what it is. I would like the audio to fade out completely so that I can fade in to another audio clip. I have clicked the fade out tabs but the volume only decreases a little at the end of the clip.
View 7 Replies
View Related
Sep 24, 2011
I'm trying the demo version of MotionStudio 3D. So far it looks very powerful and much easier to use than Graffiti. It allows you to export a project directly to the timeline in Video Studio. I wanted credits superimposed over another scene and I wanted the credits to fade in and fade out. So I put the exported titles onto track 2 in VS. I set the allignment options in VS to "fit to screen." The middle part of the clip where transparency=0 looks great. But the beginning and end, where transparency=100, instead of the title being disappearing, it turns black.
If that doesn't work, is there a way I can use VS to accomplish the same fade-in / fade-out of something on track 2? You can specify transparency for the clip on track 2, but that appears to be just one value for the entire clip, not something you can modify with keyframes.
View 2 Replies
View Related
Dec 5, 2011
Trying to edit an 8 to 10 second fade from black to a clip.
The closest I can get is this: Black color, Crossfade Transition, Video Clip This would work, but transitions are limited to 3 seconds.
Also, is there a way to freeze a video for a defined amount of time? I know inserting a capture of the last frame as a still image would work, but seems like a bit of extra work.
Video Studio Pro X4.
View 2 Replies
View Related
May 2, 2013
I have Corel X5 version of videostudio
I want to fade a title when it exits from my video. You can see in this video the title abruptly ends (you'll see it in the first 10 sec of this video: [URL] ...
I would like to have the title gradually fade away.
View 5 Replies
View Related
Apr 20, 2013
I'm just experimenting putting a project together and I have come across this option under the Project Settings under the Share Tab.
I cannot work out what it does? I have ticked/un-ticked the box but it seems to make no difference. How this works?
View 2 Replies
View Related
Jan 15, 2012
I'd like to fade the audio from 100% to 50% over a period of time as opposed to a hard cut in volume. Any trick for doing this smoothly (besides cutting it into 50 individual chunks and manually doing it)?
View 1 Replies
View Related
Oct 4, 2011
Is it possible to change the time of the fade in/out motion effect of an overlay video? I use VS Pro X3.
View 2 Replies
View Related
May 14, 2012
I've edited with VideoStudio 7, 10, 11, X2, X3 and X4 and just switched to X5. An issue that I experienced (and resolved) early in my use of VS Pro X4 has now resurfaced with VS Pro X5 and I can't recall how I "fixed" the issue last time.
My main video track is in its usual spot on the top row of the timeline (in Timeline View). Ripple editing is enabled. When I use the scissors to manually split the main track at any point, an audio fade-in is automatically applied to the trailing clip after the split. At the same time, the audio levels on both the leading and the trailing clip (before and after the split point) are instantly reset to 0 db. This is particularly maddening when I've carefully re-adjusted my main track's audio levels before applying the split.
View 7 Replies
View Related
Jan 2, 2012
Using VideoStudio X4 Ultimate 14.2.0.23 I have the following issue:
When doing a crossfade between video clips, the audio crossfades just fine in the preview of the edit screen in X4. However, after exporting to DVD 14:9 format, in the resulting MPG video the audio of the first clip correctly fades out, while the audio of the second clip doesn't fade in... it just jumps in.
View 2 Replies
View Related
Feb 27, 2012
I use titles a lot with VS x4 and have a couple of questions. I often use the backgrounds available in VS x4 under the titles to add style and make them more visible. I usually fade up to the title and fade back out again. However, when I do this, the title itself fades fairly smoothly but the background looks terrible. Is there any way to get titles and backgrounds to fade in/out together s-m-o-o-t-h-l-y?
Edit: Here's a video from YouTube: [URL].....
Watch the background for "Just a Good Read"... as the title fades off at the end of this title sequence, the background doesn't fade -- it just sort of snaps off. I really like the background but want it to fade in/out smoothly with the title.
Another question about titles: Is there any way to group title elements together so that they become one object? I created a complex title with lots of little elements such as dashes. However, when I move any one element, the others don't move, and lining them up again is a pain. Can I associate these items to create a single object in which everything is moved (and for that matter, sized) together?
View 12 Replies
View Related
Mar 10, 2012
Does X5 handle .MOVs from canon DSLRs? I know X3 and 4 choked on them..
If its been fixed I will gladly download X5 tonight!
View 5 Replies
View Related
Oct 6, 2010
After about 3 years or more of using my Canon HV30 I decided to lash out & buy an AVCHD camera, I opted for a JVC HM330 with a 30x optical zoom & 8gb memory. Got it for a good price.
I was eager to try AVCH editing with my new core i5 laptop.Its doable but no as quick as HDV.But my question is about video quality.
The JVC is supposed to record at 24mbps which should put it up there with the Canon I would have thought.
However I fell that the Canon has the better picture, it seems a bit crisper but only just there is not much in it. Why would this be? Is it becuase the Canon is just a better camera even though its getting long in the tooth now?? or is AVCHD still to catch up with HDV?
View 3 Replies
View Related
Jul 21, 2012
I have been a user of the old MSP8 editing program for some time, just updated the PC and would like to use the New video studio x5, is this compatible with the Canon XLH 1 A HD camera.
View 7 Replies
View Related
Jun 19, 2013
I've a nwe camera Canon 5D Mark III and I've some problems with these file.
When I edit in Corel Video Studio X6 all videos play in the preview screen bad because It have some short pauses.
The videos do not work in a continuous way.
I bought more RAM and now I've 12gb. Also I work with other HD files, like GoPro Videos, and I dont have problems in the preview. Maybe the container of 5D Mark III videos?
View 4 Replies
View Related
