I trimmed a wav audio file with the little yellow markers in the clip by placing the markers where I want them and using the scissors, then saved it, but when I drag it down to the timeline it comes down as the original long file.
View 2 Repliestrying it out as a hobby.Installed VS Pro x5 in a secondary drive. Trimmed a mpeg-2 U-tube using multi-trim , tried to save it as per manual by selecting>file> save trimmed clip. It started to render instead of asking which drive to save.
View 4 Replies View RelatedWas able to trim and save 11 clips in new video files over 2-3 sessions, but then program hung after initiating 12th save. No duplicate file names, ie file already exsists. Computer show 100% CPU usage implying program has gone into loop. Have to use Window task mgr to end VideoStudio. When restarted VS indicates it is completing save started in previous session but creates empty file. Removing all Ulead files and folders I can find from computer left after uninstall, and all references I can find from registry, then reinstalling VideoStudio does not fix problem. I did not remove the video files in my user directory. There are no project files. Assume something remains on computer preventing clean reinstall and removal of bug.
View 8 Replies View RelatedI have a composition which has two pieces of VO. Each has an associated text block.I want to play the first VO when the first text is clicked. Then, when the VO ends, I want the first text block to fade out, the second to fade in and play the second VO when tapped.
I have the timeline set up with labels to play through the transitions at the end of the first VO. No issues there.I have the audio playing when I click on the text blocks. All good.However, I do not know how to make the timeline wait for the audio clip to end before playing.This is the code for the first text block:
sym.$("RUP01_Nar_1")[0].play();
sym.play('Nar2');
This plays the audio but also plays the timeline instantly (so the text blocks fade from one to the other as soon as the audio starts).
I figure I need some sort of code in between which says, essentially, 'wait until the audio finishes then [play timeline]'. But as much i have searched I cannot find anything to do that.
This is a daily occurrence. As I go along editing, I inevitably come upon some video clip (or audio clip) on my timeline that is missing it's original audio (or video) counterpart. I've previously deleted the audio portion (or video) at some point earlier in the edit, when it made sense to do so. Now, though, I change my mind, or I need to hear the audio to sync other clips, or just hear the audio for reference, etc.
How do I bring back the corresponding media? I love the new "Join Through Edits" command in Premiere Pro CC, it seems that a companion feature would be something like "Restore Original Linked Audio / Video"
Match Frame seems close to what I need, but involves a few more steps than a right-click, or keyboard shortcut (maybe I don't properly understand how it works). Does any command exist that would do what I'm needing? I can't imagine I'm the only one who would need this function DAILY.
I have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
Is it possible to nudge a video segment or audio clip in timeline with a short cut key?In FCP7 I used this all the time.
View 4 Replies View Relatedcertainly the topic has already been covered but with the hundreds of responses I struggle to find it, then propose it a new:
how do I put in the time line already been settled for good, a video clip so that the whole time line moves?
Note: I added the other video clips in many 4-track, not using the main track, which is empty.So should I insert a video clip that I had forgotten about 20 minutes before the end, so you have to move automatically all the work (including effects, subtitles, etc), so it all coincides, without having to move the whole hand. ...
I want to reverse a clip in the time line and cant get to the appropriate place to do so in X5.I click the media icon-select the clip in the timeline-click options and the FX screen shows.I am not able to get rid of the FX screen to get where I want to.I have selected the storeyboard view and gone back but still the FX scgreen is the only option.
View 6 Replies View RelatedHow does one position a clip along the timeline where it needs to be? I'm either doing something wrong or there is a bug in the software
dragging a video clip(any format) from the library to the video track results in the clip being placed at the beginning. I cannot be drag/re-position it along the timeline. Also, the clip can be shortened using the handles on either end, but cannot be expanded back to its original size in the timeline. for now, I'm using the trim markers to do so. I contacted tech support & received a head-scratching out-of-context reply. Either they're not understanding me or don't care.
Every time I delete a video clip from the timeline the music track gets deleted as well. How can I avoid deleting the music track?
View 4 Replies View RelatedWhen my HD clips (m2ts) are located in the timeline, they doesn't appears in the full height of the timeline, just about half of the height.
View 2 Replies View RelatedI've been using Videostudio Pro X4 for a few days now and I've seem to have run into the problem of losing the audio of clips after I have muli-trimmed them. It doesn't matter where I multi-trim them in the timeline, after I have confirmed the trim I lose the audio for the clip?
Let me be clear: the audio for the clips work perfectly before any editing ie. trimming and they are placed in the main video track. The clip formats are mainly AVI, MP4 and DivX AVI and have varying lengths.
I recently upgraded my Corel VideoStudio X2 to Corel VideoStudio x4 Pro. After removing the old program and installing the updated version,I then restarted my computer and attempted to use it to edit a video. I placed the youtube video that I'd converted to AVI format into the timeline on the program. I then proceeded to attempt to trim <cut> the video at the first place that needed to be fixed and also at the end of the area to be repaired. After fixing it,I then reset the video to the beginning and watched for the expected changes. Much to my surprise,there was audio all way to the first cut spot on the video and absolutely nothing for the entire rest of the video;even in the cut or changed area. I was naturally puzzled as I never had this issue with the previous version. I then checked all my system audio controls and those of the program to make sure that nothing had changed or been accidently muted;including all audio settings were at proper levels,and everything was on and working as should be. I then checked the device manager to see if I found any yellow "?" marks on it for some strange reason to insure that all drivers were installed correctly;and found nothing amiss there. I then went to youtube and played a video and then a music CD in my computer to insure that my audio system was still functioning correctly and,as expected,they both worked fine and gave me audio output. Puzzled,I closed out the VideoStudio and all programs and re-started my computer. I then re-opened VideoStudio and tried again. I placed the same video on the timeline and played it without any changes. It played perfectly fine and I had audio thru-out the entire video. I then re-tried to adjust the video by clipping it and once again...no sound for the rest of the video. I re-checked all drivers and audio connections without finding anything amiss. I even tried other videos that I'd converted to AVI format in the program timeline,that I still had on computer with the same exact results after picking a spot and clipping them as before.....no audio. I even tried clipping the video in different spots;both by clicking on the scissors and with the editing options located in the program interface with the exact same results...no audio after the cut. I searched thru the program interface. I enjoyed the previous version immensly so was looking forward to using the updated version;but can't unless I can get this problem reesolved. Worse case,I can go back to the old version that worked fine for me but I hope not to.
View 2 Replies View RelatedIs it possible to have an audio file that's placed in the timeline display the actual wave image rather than just a blank bar?
It doesn't seem like it but thought I'd post the question as other similar editors do have this feature and it seems pretty standard and EXTREMELY USEFUL!
I'm having a bit of a problem with audio crackle. With one music track playing on the background, and an audio file set to play simultaneously, results with a crackling audio file. As far as I can say, the music file on the background plays OK regardless if the voice track crackles. The individual clips play OK, so this isn't because of the source audio. The project is a trailer, with the narrative voice consisting of audio files on the voice track and music playing on the background. It doesn't matter whether the narrative audio is set on the voice track or an additional music track, same problem every time.
The funny thing is that this only occurs when I'm using the timeline view or creating a video / an audio file from the project - in the 'sound mixer'- mode everything sounds and looks perfect. When I select the sound mixer and then click 'share' -> create video / audio file, the program apparently switches to the timeline view and the crackle transfers to the end result as well.
I've tried this on XP and Win 7, with no difference whatsoever. Updated Direct X, installed RealPlayer, Media Player and a whole bunch of codecs, but to no avail. Tried .ogg, .mp3 and .wav as audio formats. This is actually what I find really weird - an uncompressed .wav is the last file type you'd expect to have problems with.
Is there any way to turn off the Timeline 'snap to closest clip' function. I want a small gap between some clips.
View 3 Replies View RelatedI had noticed this when I tried using a loud audio sound effect so I removed it and changed it to something else but I am concerned about this. Here is the situation:
Segment 1: talking head video
Segment 2: black block with animation and no sound
Segment 3: black block with animation and a short sound effect (breaking glass)
Segment 4: black block with the end of animation and voice from the video
Segment 5: back to the talking head video as a continuation of segment 1
The problem I notice is that the sound, in segment 4 is very low as if the video is "recovering" from the sound effect in the previous segment. It is like it adds a fade-in where I don't need one at all.
Is that a normal "reaction" of the audio after a sound effect?
I have few avi video clips which I believe I imported from camcorder using windows moviemaker. When I play those clips in any media player they play fine.
I have latest Corel Video Studio Pro X3. When I import this videos into timeline and play clips sound plays fine but when I play the project there is no audio. Even if I render it there is no sound.
How to fade the volume out completely at the end of a audio clip. I have read the manual on the subject and have tried to follow the instructions that it gives. Until now I have not had any success. I know that I am missing something I just don't know what it is. I would like the audio to fade out completely so that I can fade in to another audio clip. I have clicked the fade out tabs but the volume only decreases a little at the end of the clip.
View 7 Replies View Relatedwhen I split an Avi file I have, if I have the clip selected and highlighted, I get audio. If I click on the time line, so no specific clip highlighted, I don't get any audio?
If I create a file, the produced file has no audio
I am a new VS6 user (coming from Pinnacle Studio). Is there a way to display the video and the video's audio waveform on the timeline at the same time. I see where I can select the Sound Mixer button above the timeline, which does show the audio waveform, but then the video thumbnails disappear.
2nd question, when I put a fade-to-black transition between two clips, it seems like the clips' audio does not get faded out then in with the next clip. Do I have to add a separate audio fade for every video fade?
I'm running VideoStudio X2...
Example:
Let's say that there is several seconds of a dog barking in one of my clips. The dog bark is a bit faint, so I need to boost the audio level of the dog barking. Can this be done?
I am attempting to completely strip and/or delete the audio from a video clip after I drag it into the time line.
The purpose is to not only eliminate the audio entirely since it will never be used with the video, but to also make the total file size smaller.
I notice that when I "split the audio" from the video clip, the audio clip is still present in the video and the file size is the same -- even after I have deleted the "now split audio" from the time line. When I right click on the video clip, I also notice that the audio is simply muted, not deleted.
Is there any way to totally delete the audio?
I've just bought VideoStudio Pro X4 and I want to mute the sound on my clips as I'm going to have music playing instead. On page 115 of the manual it says I will find the clip volume control in the Music and Voice tab. I have been all over the program interface and clicked on virtually everything but I cannot find a Music and Voice tab. In the end I had to split the audio for each clip and delete it. how to find the Clip audio volume control?
View 2 Replies View RelatedDescribe your problem: Once I've inserted a video file or files into the project timeline, playing the videos with the word "Project" under the screen highlighted, the audio (which is speech only) breaks up - all I hear is parts of words every second or two. Highlighting the term "Clip" just under "Project" provides clear, unbroken audio. This condition is new, first occurring after I installed VideoStudio Pro X3 Fix for MLE Database Incompatibility with PaintShop Photo Pro X3. Since then, I have re-loaded VSX3 and all the patches but to no avail. Note: the same video files can be processed by Windows Live Movie Maker and the audio and video come out fine, even if the effects are primitive.
What devices are involved and their mode of connection?: NONE, files are either in the VS Projects file or in my Videos folder. The Version of program is being used: Video Studio Pro X3. Please list all patches/updates that have been installed relating to that version of the program. I've installed all three patches and updates available on the Corel site (thru the User to User board) plus any updates offered by Corel.
Details of the source files. Quick Time movie, 24 bits 1280 x 720, 1 video track, 1 sound track - sound track is MPEG-4, low complexity
Where did they originate: camcorder
How did they get onto your hard drive USB cable
Type of video: Quick Time Movie
Video data rate: 29.970 frames/second
Type of audio: MPEG 4 low complexity
Audio data rate: 48,000 KHz, 16 bit, Stereo
Project Settings: As the software was shipped. I haven't changed any settings.
NTSC
Did this error occur at the: EDIT step - but it continues in the SHARE step - except the sound goes completely away after processing. OR have you gone directly to the SHARE - NO
Error Codes NONE
I have completed a slide show and added 3 songs. The songs are showing up on the audio bar at the bottom, but when I do full-screen preview there is no audio. My speakers are working fine, i'm able to play songs from other programs. I am working in PS Elements 9 on Windows 7.
And another question, if i want to burn the slide show onto a DVD - what type should I buy?
I've recently purchased VSX3 and can't not edit any videos. I have VSX3 loaded on two computers. On my laptop, I can "Mark-In/Mark-Out", but when I "Save Trimmed Video", the Rendering stops at 91% hang the software stops responding. On my desktop, I can "Mark-In/Mark-Out", but I do not get the option to "Save Trimmed Video". It is grayed out.
View 1 Replies View RelatedAfter trimming and clipping videos, I drag the segments that I want keep into the library. All of the clips that I move into the library have the same name as the original. Is there any way of renaming the trimmed clips?
View 2 Replies View RelatedThis is my first use of Video Studio X3. My first aim is to simply split an mp4 video file into 6 parts. A simple thing to ask of fancy video editing software, right?
So I dragged the video file into the storyboard area. I used the "multi-trim video" feature and did the mark-in/mark-out thing and, seemingly, was successful in sub-dividing the original video into 6 smaller ones. Following the documentation, I selected "save trimmed videos" and get the error "The frame size (1440x1080) of the video file does not match the settings and therefore cannot be trimmed." (the original video is indeed 1440x1080)
Okay, fine. So I go to the settings, find the project properties, and discover that I cannot choose a frame size any larger than 720x480. Why can't I simply change the project settings to the necessary 1440x1080 frame size? The VideoStudio user guide is completely useless with any troubleshooting, as it gives the impression that the multi-trim video process is simple and flawless, as if nothing could possibly go wrong.
I'm trialing VS ProX5 and have uploaded multiple video files and have trimmed them and multi trimmed them and now would like to join them together to make one video and put a voice over on top. Is that possible?
I haven't tried the voice over bit yet cause I haven't been able to figure out how to join the videos.