VideoStudio :: Pro X4 - Losing Clip Audio
May 27, 2011
I've been using Videostudio Pro X4 for a few days now and I've seem to have run into the problem of losing the audio of clips after I have muli-trimmed them. It doesn't matter where I multi-trim them in the timeline, after I have confirmed the trim I lose the audio for the clip?
Let me be clear: the audio for the clips work perfectly before any editing ie. trimming and they are placed in the main video track. The clip formats are mainly AVI, MP4 and DivX AVI and have varying lengths.
View 8 Replies
ADVERTISEMENT
Jul 10, 2011
I have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
View 6 Replies
View Related
May 23, 2011
Video Studio is constantly losing audio I import. I have to replace it in the time line almost every 5 minutes. Had this problem with X2 also. Updated all drivers still losing audio.
View 1 Replies
View Related
Mar 8, 2012
I recently upgraded my Corel VideoStudio X2 to Corel VideoStudio x4 Pro. After removing the old program and installing the updated version,I then restarted my computer and attempted to use it to edit a video. I placed the youtube video that I'd converted to AVI format into the timeline on the program. I then proceeded to attempt to trim <cut> the video at the first place that needed to be fixed and also at the end of the area to be repaired. After fixing it,I then reset the video to the beginning and watched for the expected changes. Much to my surprise,there was audio all way to the first cut spot on the video and absolutely nothing for the entire rest of the video;even in the cut or changed area. I was naturally puzzled as I never had this issue with the previous version. I then checked all my system audio controls and those of the program to make sure that nothing had changed or been accidently muted;including all audio settings were at proper levels,and everything was on and working as should be. I then checked the device manager to see if I found any yellow "?" marks on it for some strange reason to insure that all drivers were installed correctly;and found nothing amiss there. I then went to youtube and played a video and then a music CD in my computer to insure that my audio system was still functioning correctly and,as expected,they both worked fine and gave me audio output. Puzzled,I closed out the VideoStudio and all programs and re-started my computer. I then re-opened VideoStudio and tried again. I placed the same video on the timeline and played it without any changes. It played perfectly fine and I had audio thru-out the entire video. I then re-tried to adjust the video by clipping it and once again...no sound for the rest of the video. I re-checked all drivers and audio connections without finding anything amiss. I even tried other videos that I'd converted to AVI format in the program timeline,that I still had on computer with the same exact results after picking a spot and clipping them as before.....no audio. I even tried clipping the video in different spots;both by clicking on the scissors and with the editing options located in the program interface with the exact same results...no audio after the cut. I searched thru the program interface. I enjoyed the previous version immensly so was looking forward to using the updated version;but can't unless I can get this problem reesolved. Worse case,I can go back to the old version that worked fine for me but I hope not to.
View 2 Replies
View Related
Aug 25, 2013
I had noticed this when I tried using a loud audio sound effect so I removed it and changed it to something else but I am concerned about this. Here is the situation:
Segment 1: talking head video
Segment 2: black block with animation and no sound
Segment 3: black block with animation and a short sound effect (breaking glass)
Segment 4: black block with the end of animation and voice from the video
Segment 5: back to the talking head video as a continuation of segment 1
The problem I notice is that the sound, in segment 4 is very low as if the video is "recovering" from the sound effect in the previous segment. It is like it adds a fade-in where I don't need one at all.
Is that a normal "reaction" of the audio after a sound effect?
View 2 Replies
View Related
Jan 25, 2011
I have few avi video clips which I believe I imported from camcorder using windows moviemaker. When I play those clips in any media player they play fine.
I have latest Corel Video Studio Pro X3. When I import this videos into timeline and play clips sound plays fine but when I play the project there is no audio. Even if I render it there is no sound.
View 5 Replies
View Related
Dec 22, 2010
How to fade the volume out completely at the end of a audio clip. I have read the manual on the subject and have tried to follow the instructions that it gives. Until now I have not had any success. I know that I am missing something I just don't know what it is. I would like the audio to fade out completely so that I can fade in to another audio clip. I have clicked the fade out tabs but the volume only decreases a little at the end of the clip.
View 7 Replies
View Related
Nov 15, 2011
when I split an Avi file I have, if I have the clip selected and highlighted, I get audio. If I click on the time line, so no specific clip highlighted, I don't get any audio?
If I create a file, the produced file has no audio
View 4 Replies
View Related
Jul 8, 2011
I'm running VideoStudio X2...
Example:
Let's say that there is several seconds of a dog barking in one of my clips. The dog bark is a bit faint, so I need to boost the audio level of the dog barking. Can this be done?
View 1 Replies
View Related
Dec 5, 2010
I am attempting to completely strip and/or delete the audio from a video clip after I drag it into the time line.
The purpose is to not only eliminate the audio entirely since it will never be used with the video, but to also make the total file size smaller.
I notice that when I "split the audio" from the video clip, the audio clip is still present in the video and the file size is the same -- even after I have deleted the "now split audio" from the time line. When I right click on the video clip, I also notice that the audio is simply muted, not deleted.
Is there any way to totally delete the audio?
View 2 Replies
View Related
Apr 2, 2012
I've just bought VideoStudio Pro X4 and I want to mute the sound on my clips as I'm going to have music playing instead. On page 115 of the manual it says I will find the clip volume control in the Music and Voice tab. I have been all over the program interface and clicked on virtually everything but I cannot find a Music and Voice tab. In the end I had to split the audio for each clip and delete it. how to find the Clip audio volume control?
View 2 Replies
View Related
Aug 18, 2011
Describe your problem: Once I've inserted a video file or files into the project timeline, playing the videos with the word "Project" under the screen highlighted, the audio (which is speech only) breaks up - all I hear is parts of words every second or two. Highlighting the term "Clip" just under "Project" provides clear, unbroken audio. This condition is new, first occurring after I installed VideoStudio Pro X3 Fix for MLE Database Incompatibility with PaintShop Photo Pro X3. Since then, I have re-loaded VSX3 and all the patches but to no avail. Note: the same video files can be processed by Windows Live Movie Maker and the audio and video come out fine, even if the effects are primitive.
What devices are involved and their mode of connection?: NONE, files are either in the VS Projects file or in my Videos folder. The Version of program is being used: Video Studio Pro X3. Please list all patches/updates that have been installed relating to that version of the program. I've installed all three patches and updates available on the Corel site (thru the User to User board) plus any updates offered by Corel.
Details of the source files. Quick Time movie, 24 bits 1280 x 720, 1 video track, 1 sound track - sound track is MPEG-4, low complexity
Where did they originate: camcorder
How did they get onto your hard drive USB cable
Type of video: Quick Time Movie
Video data rate: 29.970 frames/second
Type of audio: MPEG 4 low complexity
Audio data rate: 48,000 KHz, 16 bit, Stereo
Project Settings: As the software was shipped. I haven't changed any settings.
NTSC
Did this error occur at the: EDIT step - but it continues in the SHARE step - except the sound goes completely away after processing. OR have you gone directly to the SHARE - NO
Error Codes NONE
View 14 Replies
View Related
Dec 11, 2012
I trimmed a wav audio file with the little yellow markers in the clip by placing the markers where I want them and using the scissors, then saved it, but when I drag it down to the timeline it comes down as the original long file.
View 2 Replies
View Related
Aug 5, 2011
Every minute or so, I loose audio on playback (timeline or sources). The only thing that seems to fix the issue is cycling between AES BNC (or XLR) to Embedded and back, and the audio will playback fine again . . . for a few minutes, and then I need to recycle it again. I've restarted Smoke, restarted the computer, and down a full shut down and restarted . . . and the issue continues.
View 9 Replies
View Related
Oct 11, 2011
When I select a clip, it then goes to the start of the clip, how can I sop this happening and the clip stays in the same position when selected.
View 5 Replies
View Related
Dec 9, 2013
I'm trying to replace the audio of a clip. I know I can easily delete the audio once it's in a sequence, but I'd like to replace the audio entirely so that the new audio is always on the clip as it's viewed in the project bins. You can edit in Audition for the clip, but thre doesn't seem to be a way to save the changes.
View 3 Replies
View Related
Sep 20, 2012
I have video clips on several layers in the timeline and want to mute the audio of specific video clips - they are on video lines, not the audio line.
View 4 Replies
View Related
Dec 7, 2012
I need my audio to reverse with my video clip, doesn't seem like Smoke wants to do that or am I missing something?
View 4 Replies
View Related
Mar 4, 2014
I have a short 5min film for a student film fest, all the audio and visual plays perfectly in the timeline. However, when exported, the last audio clip (which is a 'button' and comes after two soundless title slides) does not play at all. Again, it works perfectly in timeline. All audio files are .WAV and I've tried exporting it in several different fashions, none of which have made a difference.
For the film fest I need to export in 16:9, Apple ProRes 422 (HQ). I tried this, among regular Quick Time export, Vimeo export, and others...every single export the audio on the 'button' didn't play at all but the clip is there.
Side Note: I tried adding low volume audio to bridge the last clip to the button to see if that made a difference so there would be no gaps in the audio timeline, but it did nothing.
View 1 Replies
View Related
Mar 14, 2014
I'm running Premiere Pro CS5 on Win7 x64. I have an MP3 audio clip that I've selected a sub-clip from, as you can see here:
When I click on the insert button, everything to the right of the insertion point on the timeline is pushed to the right, as if the clip were inserted, but the clip doesn't show up anywhere (I've scrolled up and down through both the audio and video tracks), as you can see here:
View 6 Replies
View Related
Mar 13, 2014
I have a composition which has two pieces of VO. Each has an associated text block.I want to play the first VO when the first text is clicked. Then, when the VO ends, I want the first text block to fade out, the second to fade in and play the second VO when tapped.
I have the timeline set up with labels to play through the transitions at the end of the first VO. No issues there.I have the audio playing when I click on the text blocks. All good.However, I do not know how to make the timeline wait for the audio clip to end before playing.This is the code for the first text block:
sym.$("RUP01_Nar_1")[0].play();
sym.play('Nar2');
This plays the audio but also plays the timeline instantly (so the text blocks fade from one to the other as soon as the audio starts).
I figure I need some sort of code in between which says, essentially, 'wait until the audio finishes then [play timeline]'. But as much i have searched I cannot find anything to do that.
View 3 Replies
View Related
Jun 27, 2013
This is a daily occurrence. As I go along editing, I inevitably come upon some video clip (or audio clip) on my timeline that is missing it's original audio (or video) counterpart. I've previously deleted the audio portion (or video) at some point earlier in the edit, when it made sense to do so. Now, though, I change my mind, or I need to hear the audio to sync other clips, or just hear the audio for reference, etc.
How do I bring back the corresponding media? I love the new "Join Through Edits" command in Premiere Pro CC, it seems that a companion feature would be something like "Restore Original Linked Audio / Video"
Match Frame seems close to what I need, but involves a few more steps than a right-click, or keyboard shortcut (maybe I don't properly understand how it works). Does any command exist that would do what I'm needing? I can't imagine I'm the only one who would need this function DAILY.
View 6 Replies
View Related
Feb 2, 2014
In Adobe Prem Pro, I'm finishing a short film. All, of a sudden I am bringing over one last clip, and I can't get an audio track. So, if I select a clip and drag it over, only the video shows up.
View 5 Replies
View Related
Dec 16, 2012
Any tips for synching audio with on-camera reference mic? Also, once synched in timeline, is it possible to merge audio with video and create a clip that can be organized in media hub/bins?
View 2 Replies
View Related
Oct 24, 2012
How do I remove the audio track from a video clip which I am using in a Elements 10 slideshow?
View 4 Replies
View Related
Mar 23, 2014
It was working before. Now I can't insert any audio at all. I even tried using some of the video clips that I have already extracted audio from and they no longer work. When I have it up in the source box I can play it and the aeudio is there. But if I ovrwrite the clip or drag the clip it adds the video only with no audio. Even if I try to drag just the audio it won't allow me to put it in any ofc the audio trays. Did I acidentally push a button and turn iaudio off. How do I fix this?
View 1 Replies
View Related
Mar 17, 2014
In Adobe Premiere, I am getting an echo when I change an audio clip's speed/duration. The change is from 100% to 103%. I've tried other values in the speed duration but all create an echo.
View 1 Replies
View Related
Feb 6, 2013
Is it possible to nudge a video segment or audio clip in timeline with a short cut key?In FCP7 I used this all the time.
View 4 Replies
View Related
Nov 16, 2010
I have a GoProHD Hero camera, I've been recording stuff mainly in 960p at 30fps because that's all my computer can handle at the moment.
My main problem is that I lose the HD part of the video after edit and render the video in VideoStudio X3. The file type is MPEG4, when I render the final project, I set it to save as the same file type, at 1280x720p with a data rate of 5Mbps all in the H.264 MAIN codec mainly for Youtube uploading purposes.
If I were to upload the raw footage directly to Youtube, it's in true HD and uses the full width of the player when played at 720p. However, when I upload the final project to Youtube even when set to play in HD (720p) it is only in letterbox format.
Am I rendering my projects incorrectly? Why does it keep doing this? Is it some sort of file compression issue or something? I'm pretty new to the whole video editing platform, I'm pretty much learning on my own.
View 11 Replies
View Related
Sep 5, 2012
I bought VSX5 Ultimate last week to go with my new GoPro Hero2, climbed the learning curve, and can now produce presentable videos. I've read the (not very complete) VS User Guide, checked Corel's Knowledgebase, spent the better part of thirty hours twiddling filters (rendering to a 1280x720 output file and viewing that outside of VS) and spent about eight hours searching this forum and the Interweb for the answer to no avail, so here I am:
I have 1920x1080 30p MP4 video from the camera, but want to crop it to 1280x720, and not lose image quality. Can VSX5 do this, and/or how?
I'm new to video, but very old to photography. When I say "crop" I mean "throw away the area outside of my cropping rectangle, resulting in an image of smaller dimensions."
I do not mean "fill the area outside my cropping rectangle with the color of my choice, resulting in an image of the same dimensions" as happens when using the Crop Borders filter.
Video Pan & Zoom doesn't work as the final results are abominable; as soon as I specify 150% zoom (amount needed to make a 1280x720 area fill a 1920x1080 area) quality is lost. The Cropping filter produces the same (lost) quality results. Distort Clip does the best job but still suffers some image quality degradation, and it's nearly impossible to get a precise "150%" crop (or "33% reduction" as my Photoshop brain thinks) as dragging the handles is all by eyeball. I think the problem is that all of these options entail two steps: (1) Enlarging the area I want to keep, causing it to fill the frame -- AND losing quality in the interpolation process. (2) Saving the entire frame (clip), now filled with lower-quality "larger pixels" so to speak, at a smaller size than original.
My Project Properties are NTSC drop frame (29.97fps), AVI, 24bits, 1920x1080, 29.97fps, Frame-based, Uncompressed, PCM, 48kHz, 16bit stereo.
My Movie Template that I'm using is MPEG-4, 24 bits, 1280x720, 29.97fps, Frame-based, H.264 High Profile Video: 12500 Kbps, 48000Hz, 16bit, Stereo, MPEG AAC Audio: 128Kbps.
Am I trying to do something that can't be done? Am I overcomplicating something? Am I missing the "photographic crop" filter?
View 3 Replies
View Related
Nov 4, 2010
I created several projects on my C:drive and as they are now taking up too much room, I want to tranfer them to a new drive partition. When I do a smart package I lose all menus, and when I simply copy the whole VSPfolder to another drive, I need to re-link all files and even then, the menu doesn't seem to work. Am I doing something wrong or is there a way to preserve my projects properly on another drive and delete the original VSP folder on drive C
View 4 Replies
View Related
