After trimming and clipping videos, I drag the segments that I want keep into the library. All of the clips that I move into the library have the same name as the original. Is there any way of renaming the trimmed clips?
View 2 RepliesLightroom allows for trimming a video clip but when the clip is saved it saves the clip in it's entirety. Is there a way to delete the portions not included between the in and out points?
View 3 Replies View RelatedI've recently purchased VSX3 and can't not edit any videos. I have VSX3 loaded on two computers. On my laptop, I can "Mark-In/Mark-Out", but when I "Save Trimmed Video", the Rendering stops at 91% hang the software stops responding. On my desktop, I can "Mark-In/Mark-Out", but I do not get the option to "Save Trimmed Video". It is grayed out.
View 1 Replies View Relatedtrying it out as a hobby.Installed VS Pro x5 in a secondary drive. Trimmed a mpeg-2 U-tube using multi-trim , tried to save it as per manual by selecting>file> save trimmed clip. It started to render instead of asking which drive to save.
View 4 Replies View RelatedThis is my first use of Video Studio X3. My first aim is to simply split an mp4 video file into 6 parts. A simple thing to ask of fancy video editing software, right?
So I dragged the video file into the storyboard area. I used the "multi-trim video" feature and did the mark-in/mark-out thing and, seemingly, was successful in sub-dividing the original video into 6 smaller ones. Following the documentation, I selected "save trimmed videos" and get the error "The frame size (1440x1080) of the video file does not match the settings and therefore cannot be trimmed." (the original video is indeed 1440x1080)
Okay, fine. So I go to the settings, find the project properties, and discover that I cannot choose a frame size any larger than 720x480. Why can't I simply change the project settings to the necessary 1440x1080 frame size? The VideoStudio user guide is completely useless with any troubleshooting, as it gives the impression that the multi-trim video process is simple and flawless, as if nothing could possibly go wrong.
I'm trialing VS ProX5 and have uploaded multiple video files and have trimmed them and multi trimmed them and now would like to join them together to make one video and put a voice over on top. Is that possible?
I haven't tried the voice over bit yet cause I haven't been able to figure out how to join the videos.
I am using Pro X3 with Windows 7. I opened up MPG video I captured from HD Canon camera yesterday, then trimmed it from the original size to get one portion before dragging it down to the video track. It ran very slow that way, so I dumped the project.
Thought if I opened up the original file (11 GB), it would be fine and I could start over but cut it from the video tract rather than the clip, but now the portion I had trimmed is blacked out for video on the original "raw" MPG file but the audio is there. I tried it numerous times. On the thumbnail for this original clip, there is the video icon in the left upper corner but also two little video icons next to that. What did I do wrong? and what do the two extra video icons mean?
When I pull the same original (raw) MPG file up in Windows Live Movie Maker it is fine.
I thought the best way to construct my video would be to 'cut' out all the sections of video I wanted to use, and save them in the library. When I had them all, I could then bring them down to the timeline where each needed to go. The videos I am working from are 512x288, and when I try to use the 'save trimmed video' function, it comes back saying my frame size is not per the settings.
I haven't seen a way to make the project accept a different frame size, that option is grayed out under preferences. Is there a way for me to cut out the sections I want and save them individually?
I trimmed a wav audio file with the little yellow markers in the clip by placing the markers where I want them and using the scissors, then saved it, but when I drag it down to the timeline it comes down as the original long file.
View 2 Replies View RelatedWas able to trim and save 11 clips in new video files over 2-3 sessions, but then program hung after initiating 12th save. No duplicate file names, ie file already exsists. Computer show 100% CPU usage implying program has gone into loop. Have to use Window task mgr to end VideoStudio. When restarted VS indicates it is completing save started in previous session but creates empty file. Removing all Ulead files and folders I can find from computer left after uninstall, and all references I can find from registry, then reinstalling VideoStudio does not fix problem. I did not remove the video files in my user directory. There are no project files. Assume something remains on computer preventing clean reinstall and removal of bug.
View 8 Replies View RelatedI have been recording some narration in little chunks (for easier editing if needed), but they are called uvs130819-011.WAV. I understand about the date, but I would rather have them named by the first few words of the "paragraph" read, or something else that would make more sense to me.
Is there a way to change the name of the sound clips ?
All of a sudden my Videostudio X4 will not play any clip for longer then a second or two. When you play a clip or the project it plays for 1 or 2 seconds and stops just like you hit the stop or pause button. Click play again and it does the same thing. Makes it really impossible to edit. It had been working great up until last week. I tried uninstalling and reinstalling but still have the same problem. I have excluded my anti virus from scanning the Corel folder.
View 1 Replies View RelatedSo I drag and drop a bunch of video files into the timeline and want to mute them all in one easy step. It would seem that all you would need to do it right click and mute while they are still all selected from the import but the mute setting isn't active. meaning I have to mute each clip separately. That takes a LONG time.
View 3 Replies View RelatedCan I rename the sound clips to something more sensible and explanatory without causing any problems?
View 2 Replies View RelatedHave just started working on VS and discovered a strange issue. I can put a piece of video in the clip window to mark in/out points and it plays fine. When I drag it to the timeline and play as a clip, there is no audio!
View 1 Replies View RelatedI have ONE large 1hr AVI file captured from a DV camcorder. I have used Corel Videostudio to "split by scene", and that works fine, all clips are cpatured. BUT the shooting date for the clips are shown as the same date and time for all clips.
Where can I see the actual shooting date for each clip? I tried to use the old Win Movice maker on a WinXP machine, and here it works fine.
In corel VS I also tried to take one clip in the middle of the file and used the shared function to create an DV AVI file. This file I imported to VideoStudio - and now the date and time for this single clip is right. Unfortunately if I a convert all clips into one single file again I still have the problem.
In the past using VS10+ I noticed an issue importing sound and music clips. I did import them into my project from my music folder without any problems. The issue is when I deleted the sound and music clip from my folder it disappeared from my video project and I would have to get the clip back into my music folder and keep it in there until I burned a DVD. Is this routine for VS?
View 2 Replies View RelatedI am importing some .avi files and burning to a disc. Most of the .avi clips are fine on the DVD, but two that have panning sequences are very jerky. I checked the source .avi files and they pan smoothly.
I've explored changing the Speed to Quality slider and also the Frame Type (Upper/Lower field first) setting to no avail.
AVI Clip Properties:
File Format: Microsoft AVI files
File Size: 13,513 KB
Frame rate: 23.976 frames/sec
Duration: 62.479 seconds
Data rate: 215.01 kbps
Video
Compression: ffdshow Video Decoder
Attributes: 24 bits, 720x404
Total Frames: 1,498 frame(s)
[code].....
Cannot preview .MPG files.VSPro5 won’t play MPG clips.
I have only ever worked with AVI files, MOV files OR Video_TS files with few problems and have recently upgraded from CVSProX4 to X5. A family member has asked me to put all his home movies onto DVD. These are in MPG format.
I can import all the individual clips into CVSProX5 – however, the clips will only play when they are selected as the whole project. Selecting an individual clip for editing purposes results in a green screen. However I can manually move the scrubber through every frame within that clip (with an absence of sound) – but will not play that clip. I have converted some clips to .MOV format and can then play (and edit) and listen to individual clips.
I don’t particulary want to convert many hundreds of individual .MPG clips.
I just created a project with many different clips. Some of them play perfectly while others are jerky in playback. The original videos were imported to Correl from video files downloaded from the internet. Some of them are MPEG and others are AVI. It seems that the MPEG files play fine while the AVI files are slow. Not sure why this is since I created another very similar project and the AVI files in that project played back fine.
View 2 Replies View RelatedHow can I rename clips in the library. For example, after I split or multi split a clip, I have multiple files with the same name? I cannot click or rightclick, and then rename the files to keep them separate.
View 5 Replies View RelatedI am running the 30 days trial version of the VS pro X6, but the added clips are muted. important before buying).
When I add a clip the sound is ONLY played when volume for the clip is 100% (other value makes the clip mute) and is the clip preview, not the project preview. (project preview plays only the added soundtrack- if there is any).
Even if volume is 100%, when exporting the project, clip sound is muted (only the added soundtrack will sound).
- Of course I have tested several clips, and with or without an additional mp3 soundtrack.
- I also installed the just released VS SP 1, but no changes.
- I export (Share) using Vimeo HD template.
- Problem is not shown if I use VS 11 (which I also has installed).
My system characteristics are in my profile and also here:
- Win 8 pro 64 bits
- Dell Inc. Vostro 3360
- 1.70 gigahertz Intel Core i5-3317U
The clip's properties are:
Type: .MOV
-640x480
-dr 11347kbps
-total br: 11619 kbps
-fr: 30
-Audio br: 272kbps
-channels: 1 mono
-Audio sample rate: 16khz
I want to edit a clip by cutting out the lips from one clip and overlaying them onto another still clip . i am using vs pro 4
View 2 Replies View RelatedMy question: I prefer to shoot my videos in 720p, to optimally match my TV. I see that in VideoStudio, the only 720p option is by using HDV. Is there any other way to get 1280x720 output? I see that AVCHD and Blu-Ray only offers 1980 and 1440 options, both which resize my videos (which I do not want). I'd like to save back as 1280x720 MP4, but VS's MP4 option doesn't provide this.
(Now that I think about it, why does VideoStudio offer 1440 rather than 1280? I thought 1920x1080 and 1280x720 were the common HD formats.)
Taken video clips with that camera? It uses mpg4 ACE (which is not a codec known to VideoStudio) and my PC tells me that the clips come at 30.05 fps. What can I do now? Why the clips aren't 29.97 fps?
View 2 Replies View RelatedI am a long time Pinnacle Studio user trying out the demo for VS6 Pro. Is there a way to adjust the volume at a point in the project so that the audio to the right follows the volume setting, including all the clips to the right of the edit point? I like to bring down the audio for a good portion of the project then bring it back up etc. It would be very time consuming to have to do this for each clip.
View 5 Replies View RelatedI am having problems downloading clips to my computer. I successfully connect the camera to the USB port and can see it in Windows Explorer. The camera is a Canon Legria HFR 16E. The software that came with the camera(Pixela) does not respond because it can't read the clips (something to do with streaming, I think).
I tried to read in with Video Studio and received the message " Either no video capture driver is installed in this system, or no device is connected". I did successfully download clips earlier in the year but did have this same problem a couple of years ago. This was because the USB Connection Type was not set to "Computer/Printer" I reset this and then the problem was solved. However, this time I have checked the camera and the USB connection type is definitely set to "Computer/Printer" so I cannot think what is causing the problem.
I want to use Video Studio X4 mostly for keeping track of all my video clips. So I want to import a lot of short clips into Video Studio, view them, and rename the ones that I want to keep (with a better name than the one the camera gives), and I want to delete (from my hard drive) the clips that I do not need.
1. How do I delete a clip in Video Studio X4 (not just the thumbnail)?
2. How to I rename a video clip that I am watching?
After using multi trim and the trimmed clips are now back in the sub library, I want to mark where they are so that I can easily locate them.I have tried to drag a colour clip from the timeline but this is not being allowed.
View 5 Replies View RelatedI want to create a clip that uses a few tracks in VS, and then insert that clip in other video projects. What format should I use? I tend to use the Upload>Vimeo settings often (mp4), because Vimeo is a higher quality, but should I change those defaults?
View 6 Replies View RelatedCan I overlap clips without a transition? Here's what I'm trying to do (VS Pro X3) - I have about 30 clips that I'm putting together. All of the clips need trimming at both ends. With Sony Vegas 9, I only had to trim the beginning of each clip because then I could overlap the clips to "trim" the END of each clip (the clip previous to the overlapping clip). It appears to me that with VS Pro X3 I have to trim both ends of each clip and then put them all together end-to-end because when I overlap them, the overlapping clip doesn't actually overlap the previous clip on the timeline, but both clips transition into one another. What I want is for the overlapping clip to truly overlap the previous clip, effectively ending that clip at the point of overlap. If I don't want transitions, must I trim all clips on both ends and put them together with no overlaps?
And BTW I don't use my Sony Vegas 9 (Platinum Pro Pack) any more because the program has a bug that makes mp4 rendering impossible, and other renders very sketchy.