Photoshop :: CS6 Stops Functioning?
Oct 30, 2013
System Information
Windows 8 x64
AOC 2243fW 1920x1080 monitor (x2)
Processor: Intel Core i3 2120 3.40GHz (Dual Core)
Ram: 6GB
GPU: nVidia geForce GTX 760 TI 2GB DDR5
Notes:
Photoshop is up to date.
Performance settings in photoshop are set correctly.
Monitor Profiles are not defective.
Images/Files are not corrupted.
Issue:
After a fresh restart of my PC Photoshop will function as normal for a short while (1hr appx.) after that it ceases to import/export or do any of it's intended functions. I CANNOT import ANY files. I am not presented with any error messages and it simply doesn't work. Buttons appear to highlight and the toolbars are still accessible, however I cannot continue with my work. If I then restart my computer it will function for a short while again then this will happen.
Things I have done:
Reinstalled Photoshop CS6
Deleted Preferences (Multiple Times)
Contacted Adobe Support in which case they failed to fix the problem.
View 3 Replies
ADVERTISEMENT
Sep 14, 2013
I have photoshop CS5 and recently my zoom is malfunctioning. I draw on adobe, and more of the time when I zoomed and zoomed out my images still look consistant and smooth. Yesterday, my zoom at 33.3 and 66.7% isn't properly functioning. It distorts the pixels at these zooms, which makes it difficult to see and draw. It used to never do this, and I also didn't change anything in my photoshop to cause a change. Is there anyway I can reset the zoom how it was before? Or reset photoshop?
View 4 Replies
View Related
Nov 10, 2008
I have installed Photoshop CS3 Extended on my PC (Pentium 4, 3 Ghz, 1GB RAM). The program loads fine and I can use the adjustments (levels, hue, filters, etc). When I attempt to use the Clone stamp tool, It does not work. If I push the "Alt" key and click the mouse, I get the cross-hairs like you are supposed to, but when I release the "Alt" key, it does not clone anything. The circle and the + signs follow the mouse, but no cloning is done. Also, with the Healing brush, it goes thru the motions (round paint brush), but does not leave the dark trace when the mouse is clicked and held. So when released, no healing is done. I have Photoshop Elements 6.0 on the same computer and it works properly. I have tried un-installing/re-installing; deactivate and repair,
View 12 Replies
View Related
Jul 7, 2012
I have attempted to download Photoshop CS6 Extended trial, however, once the install is completed, it's just the standard version. WHERE can I download the Extended Version?
View 22 Replies
View Related
Mar 23, 2013
I have CS4 and am unable to use the wand tool as it used to work.I've checked the color picker settings, and it is always set to point sample, and STILL does this. I've checked and unchecked the anti-alias, contiguous, and sample all layers boxes and set them to every possible combination of the three. I've set the tolerance level to multiple numbers and it does not affect the fact that it selects like this. In fact, setting the tolerance and checking either anti-alias or contiguous does NOT affect how it selects, and it will always select like this. I've found that it is selecting EVERY color/line created, regardless of opacity of the line. I've reset the tool multiple times, reset the color picker multiple times, and reset all tools several times. No affect.
I've tried asking on Tumblr AND on deviantART and have asked Google multiple times since the issue rose, and have seen several fixes for similar problems (none of them exactly like this, as far as I could tell). I've also even gone into the AppData file and deleted the .psp file.
I've changed settings around in Photoshop, and it doesn't seem to affect anything. I really need to use the Magic Wand tool for my artwork, to select shapes in individual layers, so that I may shade them. Another problem with the selection is that whatever I select is aliased, despite the "anti-alias" box being checked.
I realize that I can use the "select pixels" option that shows up when I right click a layer, and it produces the same effect the wand tool ONCE had, but I'm used to using the wand. I'll be using the select pixels option for now.
View 4 Replies
View Related
Jun 23, 2012
I have just started using my Photoshop CS6 (64-bit).
I am trying to use Ctrl++ and Ctrl+- to zoom in and out respectively, but nothing happens.
Is there something that I should be doing before starting to use the keyboard shortcuts?
PS: my OS is Win7 Ultimate 64-bit
View 7 Replies
View Related
Mar 9, 2009
Running Photoshop CS3 on Windows XP Professional 160GB; 77GB Free
All of a sudden after more than a year functioning fine my clone stamp tool stopped working. Everything else is working fine. I reinstalled CS3 and the tool worked fine then, after a reboot, it stopped working again.
I am not supertech knowledgeable, so other than running a complete scan with my anti-virus program and a Windows Defender scan, neither of which identified any problems, I'm at a loss.
View 8 Replies
View Related
Aug 12, 2008
I have installed the trial version cs3. When I run the program it says, that the licence for this product isn't functioning anymore. I have to deinstall and reinstall or go to the adminstrator. I deinstalled it and installed it as a administrator. Same error. I am running this on Vista.
View 1 Replies
View Related
Jul 7, 2008
I purchased Adobe Photoshop CS2 for Windows XP and installed it on my work PC and my home PC.
Everything works fine and dandy on my work PC, however when I try to do some editting on my home PC there are some quirks that I can't figure out.
The main thing is that my Up/Down Arrow Keys do absolutely nothing.
Whether I am trying to edit text and scroll through my fonts or if I'm trying to nudge a part of a picture, the Arrow keys do nothing.
View 5 Replies
View Related
Jan 25, 2013
I have been having problems with photoshop element 10 since I got it. I thought is was due to all the picture and programs on my computer. i purchased a new computer and deactivated the program on the old computer and installed on my new computer.
View 2 Replies
View Related
Oct 16, 2012
CS6 Photo Down loader locks up when I attempt to download photos. Buttons like browse, settings, get media do function. This worked fine with CS5 Bridge on this machine. The machine is a windows 7 box.
I had CS5 Master Suite side X side installed with CS 6 Master Suite. When I noticed problems with the CS 6 Photo Down loader not working correctly I uninstalled CS5 Master Suite. This did not resolve the issue and I am stuck with lots of photos that are unable to be downloaded using CS6 Photo Down loader.
View 2 Replies
View Related
Nov 8, 2013
I recently upgraded to Windows 8 and now Photoshop is not functioning as normal when running on Windows 7. Mainly when a modification is made to an image i.e, cropping, unsharp mask, etc. the image will be blacked out, requiring clicking on the canvas area to reacquired the image. Also the canvus changes from my neutral gray setting to a grid or black background when modifications are performed. I reinstalled Photoshop CS6 Ex after the new Windows 8 installation.
View 1 Replies
View Related
Jun 25, 2013
The setting: Start Bridge at Log in, so that it is available in the background, will open bridge fully on system start up.
View 1 Replies
View Related
Jan 21, 2013
Mac Mini, 2010, OS 10.8.2, 8GB ram, Photoshop 13.0.4 x64. The Image / Adjustments / shadows / highlights controls are, quite suddenly, not working properly. When the control sliders are moved, nothing happens to the on-screen image until the "OK" button is actuated when any changes made to the sliders are suddenly visible. I have done all the usual things, including re-installing, but nothing works.
View 3 Replies
View Related
Aug 16, 2013
Re CS5 Ruler tool has stopped functioning. How can I correct this problem?
View 3 Replies
View Related
Jun 26, 2013
After selecting it in preferences, Bridge will open full on System Start up, and not in the background to be ready when needed.
View 1 Replies
View Related
Mar 7, 2013
I want to make one picture of two pictures from the organizer - but I don't manage to resize the picture in the top-layer. Always with the zoom-function the bottom-layer is also getting bigger or smaller - whatever I tried to entangle this layers!
View 1 Replies
View Related
Feb 29, 2012
The Type Tool has suddenly quit functioning. When I try to type with it, it gives me one HUGE vertical line on the screen, and will not adjust the font type size.
how to fix without me going through a total re-install?
View 7 Replies
View Related
Jul 1, 2013
I am having problems with photoshop. Whenever I use the brush, it seems to be faded, and have this sort of faded background over it.
It almost seems as if the 'flow' option is always down, but it is at 100%.
The more I brush over, the darker it gets, but the flow and opacity are on 100%.
Here's a quick screenshot: [URL]
Also, the brush preview box is an odd sepia color?
I think it may have something to do with my color profiles, because every time I open PS, I get the message ' The monitor profile LCD color management and conversion appears to be defective. Please rerun your monitor calibration software.'
I went to my control panel, deleted my color profiles and management, and nothing happened. I tried uninstalling and reinstalling.
It is frustrating, because I can't just draw a clean line, it always has this fuzzy border. My 'draw' tool works just fine though.
View 5 Replies
View Related
May 25, 2012
The blur gallery in photoshop CS6 has stopped functioning properly. When you activate one of the blur filters in the gallery the window changes to the gallery interface but the cursor remains as whichever tool was previously selected. Any thoughts on how to rectify this. It was working ok so I am assuming it was affected by an update but I've been wrong before. Is there any way to view and uninstall updates?
View 7 Replies
View Related
Aug 14, 2012
I just got a new laptop (Apple Mac book pro with OSX 10.8 Mountain Lion) and a fresh installation of Adobe CS6 and Photoshop is practically unusable. The issues are that there is weird color banding across the full size image (it looks fine in the thumbnail preview in the ‘navigator’ tab). These bands move and change. Next, when I use the selection tool it selects weird shapes. And if I attempt to fill it, the fills are not the color, nor the transparency nor the shapes that I set. That means masks can’t be used and pretty much no editing is possible. Some blog posts describe a similar problem, and propose changing the ‘Performance’ preferences .
View 4 Replies
View Related
May 6, 2012
I could not export the revit data using DB link as nothing is getting highlighted to click on next.
Is there anything extra that I need to install apart from MS Access or should I follow a specific procedure before I go to addins.
View 3 Replies
View Related
Jul 17, 2012
I have a problem with my scanner canonscan lide 100, when i try to scan directly from coreldraw, acquire image function seems diabled, this problem starts when i changed my os to 64bit, i've downloaded 64bit driver for my scanner but still acquire image function don't work.
View 2 Replies
View Related
Mar 26, 2013
The Screen Capture feature did function at one time. Currently, the Screen Capture feature in not functioning for unknown reasons and, I'm not sure for how long it's been non-operational. The icon is available but when I click on it, nothing happens. I contacted Corel who suggested updating DirectX, Microsoft Visual C++ 2010, Microsoft NET Framework 4 web installer, and all critical Windows updates and re-try, which I did, and nothing changed. Also, if I re-install the software, does that affect my currently saved projects? Will VSP X5 be able to locate the media files I've utilized in the projects?
View 1 Replies
View Related
Jun 8, 2012
After upgrading to Extreme 5 I cannot make animated segments. Is there something else I need to install? The Frame Gallery is grayed out. On my previous version it was always available whenever I opened the program.
View 2 Replies
View Related
Jul 23, 2013
I just switched from max 2011 to 2012 yesterday. when i am poly modeling, pressing 1-5 changes the selection from vertex, face etc.. , but re-pressing the number key doesn't de-select the sub-object lvl, i have to click the icon to deselect all. Is there some option i'm missing?
View 4 Replies
View Related
Jan 20, 2012
I have used image transparency successfully in the past . However, now I'm having to result to clipping to get rid of the white background within the frame. I have no results with jpg, gif, tiff, bmp, etc.
Is there a setting that may prevent the transparency from functioning?
View 2 Replies
View Related
May 22, 2011
I am using Autocad 2009 and it seems that whatever command under express tool just not working. e.g it says: [Unknown command "OVERKILL". Press F1 for help.] when when i typed in "overkill" or even using the express drop down menu.
View 2 Replies
View Related
Mar 12, 2008
Just out of nowhere just now, my delete key stopped function in autocad. It work fine in windows.
View 4 Replies
View Related
Sep 21, 2012
I love using Windows and Linux; however, my wife has a Mac Book Pro with X11...
She had an older version of Gimp installed, and recently it began crashing whenever she would select a text tool and tried to apply text to the image.
So, I uninstalled Gimp and downloaded a new version 2.8.2 from the Gimp website (without the addons). Upon opening Gimp there was no toolbar, so I went into tools and opened a toolbar. It appeared as one long toolbar to the left with width of one icon.
I was unable to close it, or click any of the tool icons on it. I'm unable to put in any dockable windows into it.... and the only thing I can do is maximize it full screen.
One workaround, which only temporarily and partially fixes it.... is to make the entire work area one window, then deselect that option and now the toolbar becomes the size of 2 icons . I still can't drop anything into it or resize it... or close it, but at least I can click on the tools and use them. However, once I close Gimp and Open it goes back to the old setup again...
View 2 Replies
View Related
Aug 8, 2013
I just loaded LR5 from the Cloud. The visualization tool is not available.
View 5 Replies
View Related
