I have used image transparency successfully in the past . However, now I'm having to result to clipping to get rid of the white background within the frame. I have no results with jpg, gif, tiff, bmp, etc.
Is there a setting that may prevent the transparency from functioning?
I am using Autocad 2009 and it seems that whatever command under express tool just not working. e.g it says: [Unknown command "OVERKILL". Press F1 for help.] when when i typed in "overkill" or even using the express drop down menu.
View 2 Replies View RelatedJust out of nowhere just now, my delete key stopped function in autocad. It work fine in windows.
View 4 Replies View RelatedOur .pc3 files do not save the settings properly in AutoCAD 2013.
I've created new .pc3 files for AutoCAD 2013 for the three printers/plotters we use. The .pc3 files are stored on a network drive. The four test machines we have running all have the same location of the .pc3, .pmp, .ctb files is set in the "Printer Support File Path". I created the .pc3 files with my machine; I filtered the paper sizes to be displayed and set the margins for each. When I access the files from my machine I see only the two paper sizes I set to show. If any of the other machines access the same exact file on the network drive they'll be greeted with eleven paper sizes none of which are either of the two I set up to be displayed.
If I create a .pc3 and .pmp file on a different machine it works properly only on that machine. Every other machine will be shown the same eleven paper sizes.
This happens with the HP DesignJet T1200 HPGL2, the KIP 7700 Series, and our HP Color LaserJet 5500n.
All of the test machines are HP Z400s with Intel Xeon W3565 at 3.2GHZ processors, 16GB RAM, ATI FirePro V4800 with 1GB RAM running 64 bit Windows 7 Professional Service Pack 1 and 64 bit AutoCAD 2013 Service Pack 1.
Many many times have i used the stretch command without any dramas. I now have a new PC with AUTOCAD 2010. Since the upgrade my stretch command seems to act differently.
If i go to stretch a polyline with some sort of arc joined. no part of the arc inside the window will move.
Please see the picture atatched for better detail.
Stretch.jpg
Why does it now stretch in this manner?
When I highlight any object in model space the layer control, color control or line type control does not change from the current layer status to the layer of the high lighted object if it is different. I am also not able through this layer control bar able to high light an object and use the fly out arrow to go into the layers and change this object to another desired layer for this object. I have never seen this function just not work before and can find no setting or preference that might not be turned on to make it function. why it is not functioning?
View 3 Replies View Relatedwhen I select objects to erase it will not delete if I use the delete button. erase works however I would like my delete button to function...it worked prior to my power failure... is there a setting
View 1 Replies View RelatedI am trying to link to parameters in sub-components of an assembly, and feed dimensions to them. When I am in my iLogic interface I browse to the the part in the assembly and click the plus sign next to the part I am interested in. I then click the "User Parameters" section under that part and find the parameter I want to change. Now the normal workflow is to double click the parameter and it shows up in your iLogic code like here in this example:
Parameter("MSS_Cabinet1_Frame:1", "Splice_Length2") = Cab1_SpliceLength2
Well when I try to do this now, I get this:
MSS_Cabinet1_Frame.iam.Splice_Length2
So obviously something got messed up in my machine and iLogic is no longer formating the code properly. It only happens on my machine here, everyone else in our department still works fine. I have also determined that it is happening on all files new and old.
My fear right now is that I may have to re-install Inventor and I do not want to have to do that. I do have a call in with tech support through my local reseller, but who knows how long that will take.
I have been using Inventor 2012 and have been wanting to replace model references in drawings (.idw) with other parts. Inventor will let me select the Replace Model Feature, select the model to be replaced, and find the model I want to replace it with. It will even have the prompt appear asking if I want to continue with the replacement. The issue is that when I hit yes, nothing gets replaced.
View 9 Replies View RelatedAutocad Architecture 2014
My content browser is being finicky. The palettes are there, I can select the I-drop but when I release the dropper in my file, nothing happens, no error, no content???
Is it possible to unload and reload just the content browser?
view the screen capture video here: [URL]
Basically, I create a simple mesh primitive box. I set the selection filter to vertex, and select all vertices on one side of the box. If the selection of all vertices actually registers, it simply moves the entire object, not just the vertices selected. I've tried this in all directions, and the same thing happens.. Other times, it chooses to only move one of the vertices, a result I cannot reliably reproduce -- it just sort of "happens". Scale and Rotate all function normally.
This is happening for me in Civil 3D 2011 as well as Civil 3D 2013. I launched "Civil 3d 2013 as Autocad", and this problem doesn't seem to happen. Also, in "Civil 3d 2013 as Autocad", the vertex nodes all select as red, not as blue as seen in the screencast link. I spend all my time in Civil 3D, and would like to find out why this is happening so I don't have to constantly switch platforms.
This has also been posted over in the Civil 3D group, but since it's a regular "Autocad" entity, I was hoping to have more luck here.
I'm running Win7 Pro, 16GB ram, 2.67 Ghz 8 core processor and latest service packs on everything.
Auto cad 2006 and 2012; after loading commands from tool pallet The keyboard function Ctrl+Z function is not working.This error is happening all computers.
View 6 Replies View Relatedmy CAD 2013 and Revit 2013 crashs in the open screen only..i use Windows 8 .CAD 2013 days an error saying 'The security system (softlock license manager) is not functioning or is improperly installed,.. I did try ticking the netframes from the windows on/off settings and still end up with a softlock error..
View 3 Replies View RelatedSystem Information
Windows 8 x64
AOC 2243fW 1920x1080 monitor (x2)
Processor: Intel Core i3 2120 3.40GHz (Dual Core)
Ram: 6GB
GPU: nVidia geForce GTX 760 TI 2GB DDR5
Notes:
Photoshop is up to date.
Performance settings in photoshop are set correctly.
Monitor Profiles are not defective.
Images/Files are not corrupted.
Issue:
After a fresh restart of my PC Photoshop will function as normal for a short while (1hr appx.) after that it ceases to import/export or do any of it's intended functions. I CANNOT import ANY files. I am not presented with any error messages and it simply doesn't work. Buttons appear to highlight and the toolbars are still accessible, however I cannot continue with my work. If I then restart my computer it will function for a short while again then this will happen.
Things I have done:
Reinstalled Photoshop CS6
Deleted Preferences (Multiple Times)
Contacted Adobe Support in which case they failed to fix the problem.
I have photoshop CS5 and recently my zoom is malfunctioning. I draw on adobe, and more of the time when I zoomed and zoomed out my images still look consistant and smooth. Yesterday, my zoom at 33.3 and 66.7% isn't properly functioning. It distorts the pixels at these zooms, which makes it difficult to see and draw. It used to never do this, and I also didn't change anything in my photoshop to cause a change. Is there anyway I can reset the zoom how it was before? Or reset photoshop?
View 4 Replies View RelatedI have installed Photoshop CS3 Extended on my PC (Pentium 4, 3 Ghz, 1GB RAM). The program loads fine and I can use the adjustments (levels, hue, filters, etc). When I attempt to use the Clone stamp tool, It does not work. If I push the "Alt" key and click the mouse, I get the cross-hairs like you are supposed to, but when I release the "Alt" key, it does not clone anything. The circle and the + signs follow the mouse, but no cloning is done. Also, with the Healing brush, it goes thru the motions (round paint brush), but does not leave the dark trace when the mouse is clicked and held. So when released, no healing is done. I have Photoshop Elements 6.0 on the same computer and it works properly. I have tried un-installing/re-installing; deactivate and repair,
View 12 Replies View RelatedI could not export the revit data using DB link as nothing is getting highlighted to click on next.
Is there anything extra that I need to install apart from MS Access or should I follow a specific procedure before I go to addins.
I have attempted to download Photoshop CS6 Extended trial, however, once the install is completed, it's just the standard version. WHERE can I download the Extended Version?
View 22 Replies View RelatedI have CS4 and am unable to use the wand tool as it used to work.I've checked the color picker settings, and it is always set to point sample, and STILL does this. I've checked and unchecked the anti-alias, contiguous, and sample all layers boxes and set them to every possible combination of the three. I've set the tolerance level to multiple numbers and it does not affect the fact that it selects like this. In fact, setting the tolerance and checking either anti-alias or contiguous does NOT affect how it selects, and it will always select like this. I've found that it is selecting EVERY color/line created, regardless of opacity of the line. I've reset the tool multiple times, reset the color picker multiple times, and reset all tools several times. No affect.
I've tried asking on Tumblr AND on deviantART and have asked Google multiple times since the issue rose, and have seen several fixes for similar problems (none of them exactly like this, as far as I could tell). I've also even gone into the AppData file and deleted the .psp file.
I've changed settings around in Photoshop, and it doesn't seem to affect anything. I really need to use the Magic Wand tool for my artwork, to select shapes in individual layers, so that I may shade them. Another problem with the selection is that whatever I select is aliased, despite the "anti-alias" box being checked.
I realize that I can use the "select pixels" option that shows up when I right click a layer, and it produces the same effect the wand tool ONCE had, but I'm used to using the wand. I'll be using the select pixels option for now.
I have just started using my Photoshop CS6 (64-bit).
I am trying to use Ctrl++ and Ctrl+- to zoom in and out respectively, but nothing happens.
Is there something that I should be doing before starting to use the keyboard shortcuts?
PS: my OS is Win7 Ultimate 64-bit
I have a problem with my scanner canonscan lide 100, when i try to scan directly from coreldraw, acquire image function seems diabled, this problem starts when i changed my os to 64bit, i've downloaded 64bit driver for my scanner but still acquire image function don't work.
View 2 Replies View RelatedThe Screen Capture feature did function at one time. Currently, the Screen Capture feature in not functioning for unknown reasons and, I'm not sure for how long it's been non-operational. The icon is available but when I click on it, nothing happens. I contacted Corel who suggested updating DirectX, Microsoft Visual C++ 2010, Microsoft NET Framework 4 web installer, and all critical Windows updates and re-try, which I did, and nothing changed. Also, if I re-install the software, does that affect my currently saved projects? Will VSP X5 be able to locate the media files I've utilized in the projects?
View 1 Replies View RelatedRunning Photoshop CS3 on Windows XP Professional 160GB; 77GB Free
All of a sudden after more than a year functioning fine my clone stamp tool stopped working. Everything else is working fine. I reinstalled CS3 and the tool worked fine then, after a reboot, it stopped working again.
I am not supertech knowledgeable, so other than running a complete scan with my anti-virus program and a Windows Defender scan, neither of which identified any problems, I'm at a loss.
I have installed the trial version cs3. When I run the program it says, that the licence for this product isn't functioning anymore. I have to deinstall and reinstall or go to the adminstrator. I deinstalled it and installed it as a administrator. Same error. I am running this on Vista.
View 1 Replies View RelatedI purchased Adobe Photoshop CS2 for Windows XP and installed it on my work PC and my home PC.
Everything works fine and dandy on my work PC, however when I try to do some editting on my home PC there are some quirks that I can't figure out.
The main thing is that my Up/Down Arrow Keys do absolutely nothing.
Whether I am trying to edit text and scroll through my fonts or if I'm trying to nudge a part of a picture, the Arrow keys do nothing.
After upgrading to Extreme 5 I cannot make animated segments. Is there something else I need to install? The Frame Gallery is grayed out. On my previous version it was always available whenever I opened the program.
View 2 Replies View RelatedI just switched from max 2011 to 2012 yesterday. when i am poly modeling, pressing 1-5 changes the selection from vertex, face etc.. , but re-pressing the number key doesn't de-select the sub-object lvl, i have to click the icon to deselect all. Is there some option i'm missing?
View 4 Replies View RelatedI love using Windows and Linux; however, my wife has a Mac Book Pro with X11...
She had an older version of Gimp installed, and recently it began crashing whenever she would select a text tool and tried to apply text to the image.
So, I uninstalled Gimp and downloaded a new version 2.8.2 from the Gimp website (without the addons). Upon opening Gimp there was no toolbar, so I went into tools and opened a toolbar. It appeared as one long toolbar to the left with width of one icon.
I was unable to close it, or click any of the tool icons on it. I'm unable to put in any dockable windows into it.... and the only thing I can do is maximize it full screen.
One workaround, which only temporarily and partially fixes it.... is to make the entire work area one window, then deselect that option and now the toolbar becomes the size of 2 icons . I still can't drop anything into it or resize it... or close it, but at least I can click on the tools and use them. However, once I close Gimp and Open it goes back to the old setup again...
I have been having problems with photoshop element 10 since I got it. I thought is was due to all the picture and programs on my computer. i purchased a new computer and deactivated the program on the old computer and installed on my new computer.
View 2 Replies View RelatedI just loaded LR5 from the Cloud. The visualization tool is not available.
View 5 Replies View Relatedhow can I prevent autosave from happening in the middle of a command. it is very frustrating and can potentially cause a crash (rarely though).
DO NOT TELL ME TURN OFF AUTOSAVE. I like it on, want it on and my computer has no issue handling it and it rarely crashes during.