AutoCAD 2013 :: 64 Bit PC3 Files Not Functioning Properly
Aug 23, 2012
Our .pc3 files do not save the settings properly in AutoCAD 2013.
I've created new .pc3 files for AutoCAD 2013 for the three printers/plotters we use. The .pc3 files are stored on a network drive. The four test machines we have running all have the same location of the .pc3, .pmp, .ctb files is set in the "Printer Support File Path". I created the .pc3 files with my machine; I filtered the paper sizes to be displayed and set the margins for each. When I access the files from my machine I see only the two paper sizes I set to show. If any of the other machines access the same exact file on the network drive they'll be greeted with eleven paper sizes none of which are either of the two I set up to be displayed.
If I create a .pc3 and .pmp file on a different machine it works properly only on that machine. Every other machine will be shown the same eleven paper sizes.
This happens with the HP DesignJet T1200 HPGL2, the KIP 7700 Series, and our HP Color LaserJet 5500n.
All of the test machines are HP Z400s with Intel Xeon W3565 at 3.2GHZ processors, 16GB RAM, ATI FirePro V4800 with 1GB RAM running 64 bit Windows 7 Professional Service Pack 1 and 64 bit AutoCAD 2013 Service Pack 1.
View 5 Replies
ADVERTISEMENT
Feb 19, 2013
view the screen capture video here: [URL]
Basically, I create a simple mesh primitive box. I set the selection filter to vertex, and select all vertices on one side of the box. If the selection of all vertices actually registers, it simply moves the entire object, not just the vertices selected. I've tried this in all directions, and the same thing happens.. Other times, it chooses to only move one of the vertices, a result I cannot reliably reproduce -- it just sort of "happens". Scale and Rotate all function normally.
This is happening for me in Civil 3D 2011 as well as Civil 3D 2013. I launched "Civil 3d 2013 as Autocad", and this problem doesn't seem to happen. Also, in "Civil 3d 2013 as Autocad", the vertex nodes all select as red, not as blue as seen in the screencast link. I spend all my time in Civil 3D, and would like to find out why this is happening so I don't have to constantly switch platforms.
This has also been posted over in the Civil 3D group, but since it's a regular "Autocad" entity, I was hoping to have more luck here.
I'm running Win7 Pro, 16GB ram, 2.67 Ghz 8 core processor and latest service packs on everything.
View 2 Replies
View Related
Jul 2, 2012
I am trying to link to parameters in sub-components of an assembly, and feed dimensions to them. When I am in my iLogic interface I browse to the the part in the assembly and click the plus sign next to the part I am interested in. I then click the "User Parameters" section under that part and find the parameter I want to change. Now the normal workflow is to double click the parameter and it shows up in your iLogic code like here in this example:
Parameter("MSS_Cabinet1_Frame:1", "Splice_Length2") = Cab1_SpliceLength2
Well when I try to do this now, I get this:
MSS_Cabinet1_Frame.iam.Splice_Length2
So obviously something got messed up in my machine and iLogic is no longer formating the code properly. It only happens on my machine here, everyone else in our department still works fine. I have also determined that it is happening on all files new and old.
My fear right now is that I may have to re-install Inventor and I do not want to have to do that. I do have a call in with tech support through my local reseller, but who knows how long that will take.
View 8 Replies
View Related
Sep 21, 2012
I love using Windows and Linux; however, my wife has a Mac Book Pro with X11...
She had an older version of Gimp installed, and recently it began crashing whenever she would select a text tool and tried to apply text to the image.
So, I uninstalled Gimp and downloaded a new version 2.8.2 from the Gimp website (without the addons). Upon opening Gimp there was no toolbar, so I went into tools and opened a toolbar. It appeared as one long toolbar to the left with width of one icon.
I was unable to close it, or click any of the tool icons on it. I'm unable to put in any dockable windows into it.... and the only thing I can do is maximize it full screen.
One workaround, which only temporarily and partially fixes it.... is to make the entire work area one window, then deselect that option and now the toolbar becomes the size of 2 icons . I still can't drop anything into it or resize it... or close it, but at least I can click on the tools and use them. However, once I close Gimp and Open it goes back to the old setup again...
View 2 Replies
View Related
Jun 25, 2013
The setting: Start Bridge at Log in, so that it is available in the background, will open bridge fully on system start up.
View 1 Replies
View Related
Jan 21, 2013
Mac Mini, 2010, OS 10.8.2, 8GB ram, Photoshop 13.0.4 x64. The Image / Adjustments / shadows / highlights controls are, quite suddenly, not working properly. When the control sliders are moved, nothing happens to the on-screen image until the "OK" button is actuated when any changes made to the sliders are suddenly visible. I have done all the usual things, including re-installing, but nothing works.
View 3 Replies
View Related
Jun 26, 2013
After selecting it in preferences, Bridge will open full on System Start up, and not in the background to be ready when needed.
View 1 Replies
View Related
May 23, 2013
For instance if i want to add inner glow for layer, let's call it logo, even though i use the python version of the plug-in i'm unable to see the preview and when i submit the layer effect it creates a new layer but there is absolutely no effect created.
I'm trying to move from windows and photoshop to linux and gimp as my only an primary os and tool in case of gimp. I mean is there any other way especially for stuff like dropshadow, stroke and stuff like that? I mean i can think of several possible solutions but all of them just seems so slow it makes me want to go back to windows and adobe products.
(Ubuntu 13.04, cinnamon)
View 2 Replies
View Related
Oct 5, 2012
I'm currently working on a model and there are a few faces that need extruding. Whenever I go to extrude them rather than just adding to the face it simply takes the face moves it back (or forward) and adds sides to it, so rather than being a solid extrude it's a concave area.
Intel Core i7 CPU 960 @ 3.20GHz
Windows 7 Ultimate 64 bit
ATI Radeon 5900 Series
3DS Max 2013
Maya 2013
View 8 Replies
View Related
May 23, 2013
Experiencing trouble with layer effects? For instance if i want to add inner glow for layer, let's call it logo, even though i use the python version of the plug-in i'm unable to see the preview and when i submit the layer effect it creates a new layer but there is absolutely no effect created.
I'm trying to move from windows and photoshop to linux and gimp as my only an primary os and tool in case of gimp. So why is such a great feature so sucky in gimp? I mean is there any other way especially for stuff like dropshadow, stroke and stuff like that? I mean i can think of several possible solutions but all of them just seems so slow it makes me want to go back to windows and adobe products.
Could the problem be with my setup? (Ubuntu 13.04, cinnamon)
View 2 Replies
View Related
Jul 1, 2013
I am having problems with photoshop. Whenever I use the brush, it seems to be faded, and have this sort of faded background over it.
It almost seems as if the 'flow' option is always down, but it is at 100%.
The more I brush over, the darker it gets, but the flow and opacity are on 100%.
Here's a quick screenshot: [URL]
Also, the brush preview box is an odd sepia color?
I think it may have something to do with my color profiles, because every time I open PS, I get the message ' The monitor profile LCD color management and conversion appears to be defective. Please rerun your monitor calibration software.'
I went to my control panel, deleted my color profiles and management, and nothing happened. I tried uninstalling and reinstalling.
It is frustrating, because I can't just draw a clean line, it always has this fuzzy border. My 'draw' tool works just fine though.
View 5 Replies
View Related
May 25, 2012
The blur gallery in photoshop CS6 has stopped functioning properly. When you activate one of the blur filters in the gallery the window changes to the gallery interface but the cursor remains as whichever tool was previously selected. Any thoughts on how to rectify this. It was working ok so I am assuming it was affected by an update but I've been wrong before. Is there any way to view and uninstall updates?
View 7 Replies
View Related
Mar 20, 2013
my CAD 2013 and Revit 2013 crashs in the open screen only..i use Windows 8 .CAD 2013 days an error saying 'The security system (softlock license manager) is not functioning or is improperly installed,.. I did try ticking the netframes from the windows on/off settings and still end up with a softlock error..
View 3 Replies
View Related
Apr 27, 2013
I've been messing around with a 3D drawing trying to get it to plot properly. I have 4 viewports on the layout, and the issue is that parts of the viewport are being mysteriously chopped off, as if some great big white box is covering part of the viewport. This is definitely not an issue with printer margins - this is occuring in the middle of the page.
I've deleted all the viewports and created new ones, but the drawing is still being cut off in the same locations. 20 sheets of A3 and most of the day later.
View 6 Replies
View Related
Nov 22, 2013
working with 2014 acad and i have made myself a partial CUI. it is really only one extra tab on the ribbon with a few of the standard panels i use in one place. nothing to out there. so here is a step by step of what i did to get this cui file.
entered comannd CUI in command prompt.
went to "Transfer" tab in the CUI dialog box
on the left panel it is "Main Customisation File (acad.cuix)"
on the right panel i created a new CUI file.
then right clicked the "Ribbons" path and created new "Josh's Tab"
then transfered the panels across i wanted
then saved the cui as "Josh's CUI.cuix"
then loaded the .cuix file via the "CUILOAD" command
at first nothing at all happened, so i unloaded and reloaded it. then closed and opened acad again. still nothing
so i loaded it and unloaded it a few times again. so i went back to "CUI" and had a look at my partial and it hadn't saved anything.
so i created a new tab again "Josh's Tab"
transfered the panels again and saved the file then loaded and reloaded the .cuix
when i loaded it acad "blinked" while it reloaded all the CUIs and my tab was there but no panels. i had another look at the CUI and the panels are there but not showing in the ribbon.
i have done this from 2009-2012/13 (can't remember which i was last using) and never had a problem. i have been away from Acad for the last 16months though so i figure i have just forgotten one simple step somewhere. I have the current SP installed also.
Product design suite 2014 running on a Toshiba Qosmio X870-70
View 1 Replies
View Related
May 16, 2013
Initially we got an error message stating: "error: no function definition: VLAX-USER-PRODUCT-KEY".We did some trouble shooting ourselves with information obtained via several web searches, involving the following:
1) Adding .fas files from the Express directory to the appload.
2) Reloading the acetmain.cuix via menuload (had to unload it first, since it was apparently already loaded)
3) Removing and re-adding Express Tools via Programs & Features (Add/Remove programs)
4) Reinstalling AutoCAD 2014
5) Running (vl-load-com) from the command line (no effect)
6) Running expressmenu and expresstools from the commandline (says it's successful).
then we are now getting "error: no function definition: VLAX-MACHINE-PRODUCT-KEY"..The registry keys appear to be OK, and I am seriously at the end of my tether. I have pretty much tried everything I could find to no avail.
View 1 Replies
View Related
May 29, 2013
I have a series of block references in a tool palette which I want to explode once inserted. Simple I think, just set the 'explode' property on the tool palette icon.
Wrong. What actually happens is that in my case where the block refernce is simply two blocks inserted on different layers, the tool palette will insert onto the layer specified, and then explode, moving each block from its original later, onto the layer the host block is inserted on.
For example:
BlockRef_A consists of two enties:
BockRef_1 on Layer1Blockref_2 on Layer2
Using the tool palette to insert and explode using the 'use current' for the destination layer, I get the following:
BlockRef_1 on 0
BlockRef_2 on 0
Both the destionation layer (Layer1 Layer2) already exist in the target drawing.
It looks to me like autocad is importing the block, exploding it, moving it to the required layer.
This doesn't happen to any other entities, if there's a block that consists of a mix of parts, only the block references within it get moved to the destination layer.
ACad, MEP, 3DS Max
Windows 7x64
X5482 @3.2Ghz 8Gb Ram
Quadro FX1700
View 9 Replies
View Related
Jul 6, 2012
I am having problems with quick select not working properly in 2013 when I am cleaning up X-Refs selecting hatcing or anything else it does not just delete what I am tring to select it just deletes everything. If I go back to any prevous version of AutoCAD it works fine the only solution i can think of is to reinstall.
View 9 Replies
View Related
Jan 7, 2013
If Inventor is on the screen when the pc locks (win+L) Inventor will not display properly after unocking the pc. Moving the mouse around will change what is highlighted in the feature tree and things like that, but I cannot at all see the actual object I am working on. Changing from one open component to another does not work. I have to restart each time this happens. I have updated both Inventor and my display drivers to a supported version.
View 7 Replies
View Related
Dec 15, 2013
When I have to scale something after bringing it in from another drawing (Windows copy, paste), usually (but strangely not always, it seems) the dimension text and arrows are all messed up. If I scale down, they are (obviously) way too big, up, and they are microscopic. How is this best avoided / dealt with? I imagine it is something with the DIMSTYLE not being copied over or something?
View 5 Replies
View Related
Sep 26, 2013
I installed acad 2014 and copied all my font files into the directory that cad says it looks in under the support paths, and the main font used is a true text font (penguin) and it is not showing up right.
View 2 Replies
View Related
Dec 19, 2012
I have a linetype that is a drain line so it's dashed and has a "D" within it along with an arrow pointing in the direction of flow. The drawing I have contains many of these lines ehich display properly in the viewport meaning you can see the dashes, D's and arrows.
Problem is, I got an as-built from a contractor as pasted it into my drawing. His lines look fine in my model space, but in my viewport the lines appear solid and you don't see the dashes, D's or arrows. I tried MATCHPROP to make the contractors lines match my existing lines but that did not work. I tried andjusting the linetype scale but that doesn't work either.
View 4 Replies
View Related
Nov 8, 2012
In the process of releasing 2013 to the office. We have about 60 machines being loaded, varying from 64-bit Win 7, 32-bit Win 7 and 32-bit Win XP. I have gone through and created new PC3 files for our two KIP printers (3000 & 7000 series). I added one custom page size to each to create a PMP that goes along with them. These files have been placed onto a network folder for all users to access. This is where my confusion begins.
When other users go to utilize these files it is giving an error stating that "the plotter configuration cannot be found, driver cannot be found, device cannot be found, yada yada. The none has been substituted."
So we began to look at the PC3 files and see what the issues are. When the same file on the Server is copied down to a local machine it changes back to a KIP10 driver down from a KIP11 driver on the network. Make Sense?
In order to fix I began running the "Add-A-Plotter Wizard" on the local machine. Created a new PC3 wiih a different name and went back into the program. Now the PC3's that did not work before WORK.
In short, since the 2013 version has a new file format do we have to run the "Add-A-Plotter Wizard" on all local machines before the standard PC3 file will work effectively? Or does having 2011 version still on the machines have an effect on these files?
Win 7 Pro 64-Bit - Dell T1600
Intel Xeon 3.30Ghz
8Gb RAM
Civil 3D 2013
View 1 Replies
View Related
Mar 13, 2013
I have created three photos from a .NEF file with the following ev for each one: -2, 0, +2
When I go into photoshop to create HDR image the filmstrip shows the three images but with incorrect ev values. One is 0.0, the second is 0.0 and the third is .3
View 3 Replies
View Related
Jan 5, 2013
Prior to printing my work, I save PDF versions of my files. More often than I'd like, when I print the PDF file from my computer, some of the graphics do not print correctly. For example, a portion of a curved graphic (like a swirl) might be cut off leaving a blunt straight edge. Have issues with PDF files? Is there anything I can do to control this quality issue?
View 1 Replies
View Related
Jan 10, 2014
On December 19th, I just went to Mac from Windows. Bought a new computer (OS X) and transfered files from an external hard drive. I did not do the stardard catalog transfer and had many pictures I wanted to delete, so I transferred the old pictures through the "Another Catalog" feature import. So far so good. All worked very well for 2 years worth of pictures... while I was transferring CR2 files. Did not lose any images until I hit the following snag.
I was still on the old Windows pc on December 11th when I decided to start using DNG files and started using "Copy as DNG" option for import. On December 19th I received the new computer and started the transfer process.
The DNG files (Copy as DNG) which I started using on Dec 11th did not transfer, not one image. I lost all the information for these files. The actual DNG file is fine, but all the catalog information with all the adjustments do not transfer as the CR2 files did. At first I just got an error message when I transferred the images... saying error occured. I did not know why the transfer was not happening, and on further investigation I realized that the correct transfer stopped on Dec 11th. That is when I realized it must have been because of the DNG "new" file format. I decided to just transfer one image at a time to see exactly what would happen and Lightroom5 said "the original file is not available". I then realized that when I transferred the images from Dec 11 thru Dec 19th I COPIED them from the external drive as "Copy as DNG"... which means that I was trying to transfer and copy as DNG a file that was already copied as DNG. I made this error because I had just started using that feature and did not remember to switch to just "copy" for the transfer for those dates. Could this error have caused the non-transfer of the files for those dates?
Bottom line is that I have lost all the work for that one week which included a number of images.
When I open the old catalog I see the image information but a blank space for the missing images... right next to each image it is the DNG raw file..side by side. I cannot get the old catalog to recognize the individual catalog information for each image I worked on.
My question is... can anything be done to recover that information. Missing photographs is not the problem. It appears either my error of double copy of DNG format is the issue OR I had set the preferences incorrectly somewhere. I am aware that I could have embedded the RAW file information into the DNG file, but this was not checked off in the preference menu. Could there be any comparability issues between OS X and Windows? I do not think this is the problem but just putting it out there. My greatest fear is thinking I am using DNG incorrectly and will lose everything again in the future.
BTW, the original CR2 files are not avalable to me any more... computer hard drive was erased as it appeared all the information had backed up properly. And the backup files on the external hard drives are DNG format. So no CR2 files are available at all.
View 6 Replies
View Related
Jan 22, 2013
I have 2013 inventor/mechinical a cad did not have enought memory on c: drive added another hard drive E: need to move my files to the e drive. single seat all on this computer.
View 4 Replies
View Related
Jul 14, 2012
We recently updated all of our software at my company from 2010 architectural desktop to 2013 autocad. We do a lot of architectural work where we use the "wall" functions to draw our floorplans. I have noticed that the walls are disappearing on some files and not on others. Or we will only be able to see the outside line of the wall, but not the interior, which results in an undesirable appearance to the floorplans.
I have also run across these error messages when opening the files, I dont know if they are related or not:
"Unhandled exception C0000005 (access violation reading 0xffffffff) at address E43AA180h"
and
"Unhandled exception C0000005 (access violation reading 0xffffffff) at address D41218AEh"
View 4 Replies
View Related
Nov 23, 2012
I'm always fighting memory problems with Photoshop CS6, which I work in for 5 to 8 hours every day. I have a 27" iMac with a 3.4GHz i7 processor, 32GB of RAM, AMD Radeon HD 6970M with 2GB Ram and over 1.5TB of available scratch disk space. After working thru a couple of large images I have to start monitoring RAM use via Activity Monitor and reclaiming RAM via Terminal very often in order to continue working.
I believe something strange is happening in the background because very often, when I start a new session, PS "recovers" a "large format document"... one that was properly closed in a previous session, and one that I have not asked PS to open. I feel like my whole memory usage issue is tied to the system somehow holding onto those "large format documents".
View 5 Replies
View Related
Jul 27, 2012
After I've finished editing or combining photos, I try to save them and all that gets saved is a blank image. How do I get the program to save my images properly?
View 8 Replies
View Related
Mar 8, 2012
So why did you remove the possibility to correct ca manually?
View 7 Replies
View Related
