When I start rendering a composition, I usually just go to a spare monitor to browse the web and do additional work. However whenever I click onto my new monitor, AE stops rendering and gives me the 'finished sound'. Why doesn't it complete rendering? I have to leave my computer alone and keep a window selected in AE for it to complete.
View 1 RepliesPs CS6 13.0.1
OS X 10.6.8
3D rendering stops when mouse is clicked, regardless of which app has focus or in which app's window the mouse is clicked.
how another app can have focus before the mouse is clicked, Cmd+Tab can be used to switch between apps.
sometimes rendering the RAM-Preview takes some time. while waiting I would like at least to read some articles on the internet. But as soon as I click into an other windows, AE stops rendering.
is there a special setting / workaround to avoid this (user-unfriendly behavior) ?
When I double-click a file it will open the file in CS6 version 13.0.1, but then after a while double-clicking will no longer open jpeg or raw files. I can open the same files by going to File > Open in the Menu Bar.
When I am simply opening downloaded files from my camera, I can open 200-300 by double-clicking with no problems. However, at times when I am working on an image, it is not long before I can't open a file by double-clicking. It will open a blank Photoshop window, but without any Toolbar or Menu Bars.
This happens on a regular basis. Sometimes, also, Photoshop is slow to Quit, for no apparent reason.
Rendering at high quality, exterior sun only, 150 DPI and the image is about 9' tall x5' wide. Everything goes great until it hits 26%. Then the bar goes full on 100% but the image is only 26% rendered.
I have a 2gb video card, 4.1Ghz overclocked processor and about 8GB of RAM. Perhaps I havn't allocated enough memory to render an image of this size?
I am using Video StudioPro X4 and rendering a video that is about 15 minutes when it stops at 4% complete, showing the following words: Cannot read audio (0x80004005). Other numbers on the message are: (18300:8000:192). Is there a way to know why it will not continue rendering and/or which audio files to check?
View 3 Replies View RelatedI am trying to complete my first project in X3 with a new computer. I have done many projects on an older computer with VS 10. I X3 stops working during the rendering process everytime I try to make a video file. I'm making a 4:3 mpeg 2 file (DVD). I have tried several different ways and the most I can get done is 24%. i have tried to cut out a clip..I get a dump file each time that it tells me to send to Corel.
View 5 Replies View RelatedSo I recently created a 350 frames long animation, which I then tried to render out as an .avi using the mental ray renderer.
I have it set up in the render setup to render from frame 0 - 350, I have also chosen the output format.
Everything seems to work fine and dandy, the frames are rendered out nicely but then all of a sudden after about 40-50 frames it just stops rendering. The little window containing the progress bar just seems to disappear and in the render preview window is a half rendered image.
I have tried redoing this 3 times, but every time it just stops rendering at about the same place. The first time it stopped at frame 43, the second time at frame 47 and the third time somewhere inbetween.
Photoshop CS6 stops working while rendering a HD Basic video. I am using windows 7 32 bit with photoshop CS6.
View 10 Replies View RelatedToday i've noticed that when i copy/paste a timeline from Premiere CC to AE CS6 unfortunately nothing happens. So i can't dynamic link or copy/paste footage in AE CS6. I can only use AE CC. Usually i make my edit in Premiere and then i use the same timeline in AE to do postproduction. If i uninstall AE CC can i be able to copy/paste my timeline in AE CS6 from Premiere CC?
I can't install Premiere CS6 because i use an MXO2 card.I can run AE,Photoshop and Encore CS6 with CC apps on the same machine,but not Premiere CC and Premiere CS6 at the same time.
I was using Roto Brush for a while today and everything was working as expected. I Roto Brushed about 20 frames, just doing touchups where necessary. However, after a while, Roto Brush just stopped responding to new strokes. I could not add or remove from the mask. I've tried flushing the RAM and then restarting AE but the problem persists.
I'm using After Effects CC on Windows 7 64-bit with 16GB of RAM.
I made a screen cast to show the problem. You'll see me painting to add and remove from the mask on a couple of frames. Roto Brush looks like it's going to do something but then nothing changes in the mask.URL....
So I'm working on this composition with a lot of 3d layers. Sometimes when I switch views, the hand tool stops working completely, for no apparent reason. I hit space, the hand icon still shows, but nothing happens when I drag the cursor. Then after a while it starts working again, for no apparent reason either.
View 1 Replies View RelatedWhen I suppress a part or a sub-assembly in Inventor 2013 and then right click on the suppressed item in the browser window I always get an cadabundus error message (see attachment), after I press OK I get the normal right click menu hovering over the item.
I have Inventor 2013 RTM 64 bit Build 138, and running on Vista 64bit.
I am animating comps in After Effects CS6, and I'm quickly moving objects across the screen using positioning keyframes and changing size using scaling keyframes. Most of the time it works great; but sometimes the motion blur effect keeps appearing *after* the object has stopped moving. Not just for a second -- but forever. It appears correct when scrubbing on the timeline, but when I render the final output movie, a non-moving object sometimes has motion blur all over it.
Sometimes I can fix it by un-parenting some layers inside the comp... other times it doesn't fix it. Sometimes I just delete it and start over and it works. Seems more like a bug then something I'm doing wrong.
I also tried on my Mac Pro tower and Macbook Pro laptop in case it was a graphics card issue; it isn't, the exact same problem manifests itself in both areas. I did just discover that turning continuous raster OFF does seem to fix the problem--but then my vector images are blurry when I zoom in... and that again sounds more like a bug, not like an incorrect setting.
i was modelling my weapon and my render window wont open i pressed F9 and F10 for setup it renders but the window did not open.
View 1 Replies View RelatedIs there a reason that After Effects keeps crashing and only getting to a certain render point when pressing "0"? If I split projects into different compositions I don't tend to get the same issues, but it's more pain than it's worth spiting one video into 4 parts.
View 5 Replies View RelatedI am trying to make about a 7 second clip of some photography (converted into that cool 3D paralax effect) with a lens flare and a CC light rays effect. The damn thing took two hours and was less than halfway done, which seemed extremely long to me. Here is my setup:
i7 4770 (2 processes for system, and 6 for AE, with 2 gigs per process)
Nvidia 760 4bg
32 gigs ram (4 set aside for system and the rest for Creative Cloud stuff)
SSD: system, media cache
HDD: projects, files
Everything else I've tried to render has been reasonable times. For instance 5 minute clips usually take about 15 minutes. I've tried variations of the multiprocessing tab to no avail, and changing the media cache to HDD which didn't work also. Just seems like something is going terrible wrong.
So I guess my question is twofold.
1) How important would it be to get another drive? (I'm between adding one SSD or getting 2 HDD's per my budget, which presents another question of would a 2 SSD, 1 HDD setup be better than a 1 SSD, 3 HDD setup)
2) Do I possibly have something configured wrong?
So today I was editing and I finished, so I tried to render it so I can have in a .avi. But once I rendered it I got no errors or nothing. So I went to the desktop were it should have been placed, I loaded it and it didn't render properly after a couple of secs the music stops playing and I didn't get the glow effects or the full edit. How do I fix this tell me if you need sertain information.
View 6 Replies View RelatedAny way of creating a glowing object without using the rendering effects.I am trying to create an Acrobat 3D file using Tetra 4D which does not support 3DS Max rendering effects.
View 1 Replies View RelatedI was wondering if there was a way for me to render a full composition in Aftereffects as a Photoshop file (1 document) that contains all the layers?
View 12 Replies View Relatedwhy my After Effect render so lousy???When i finish my rendering,the video play very slow and keep stopping....I've tried for many times,but it's still the same result..
View 2 Replies View RelatedI am currently working on After Effects CS6 and I'm wondering why it takes a long time for me to render a composition. I am not sure if the problem is with the mac that i am using or with the settings i have on AE. When I render the composition of 21 seconds video with 1080p 29.97fps it takes 5 hours and eralier i triend rendering again and it takes 7 hours. is this normal?
I am using Mac with this spe
Processor 2 x 2.4 GHz 6-Core Intel Xeon
Memory 12 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5770 1024 MB
I downloaded a composition from Videoblocks.com and hit RAM preview to let it play smooth. Then whetever I move the CTI after that, it de-renders.This has never happend in other compositions I've worked in.
View 3 Replies View Relatedjust switched from a macPro to a Windows Workstation specs are:
Windows7 with ServicePack1
intel Corei7 3970X
64GB RAM
Nividia GeForce GTX680
Using Quicktime Version 7.7.4
so everything runs smoothly till i try Rendering my comp in a .mov-Container Codec doesn't matter which one i take. Tried everything from Fotojpeg to DNXHD to png. Nothing Changes. As soon as i swiitch to avi rendering it's really fast. (Project rendered in 5mins whereas i cancelled the rendering after 15mins when trying to render to QT-Fotojpeg)
is there a way to define a sequence of images to be rendered into a movie from the command line, without first creating any composition ? Basically loading media and creating composition by command line or by script ?
View 4 Replies View RelatedI have a .wav file in my composition that I see the waveform going across the entire composition. If I grab the first 10 seconds of my composition and hit 0 on the number pad, it correctly plays the audio the entire time. When I render that composition, making sure audio is enabled, it doesn't work. The resulting .mov file plays the audio for the first 5 seconds and then just abruptly stops.
I'm using the Creative Cloud version.
I have a fairly basic comp consisting of 3 or 4 3d layers spaced out along the Z axis, two precomps containing some edge lighting effects, a camera, a light, and the troublesome adjustment layer. The adjustment layer only contains some color correction and a flare. I thought perhaps a certain effect may be causing the layer not to render, but i eliminated that possibility by removing the effects i had and trying several other, the layer was still not rendering. I think I have exhausted all of the really simple solutions, nothing is solo'd, all the layers are visible in the preview, the layers are all in the correct order etc.. I can't SS the project right now as I am not at home, but i can tell you that I am working with CS5.5, on windows 8.1, i5 cpu, 8 gigs of ram. The really frustrating part is that a slightly earlier version of the project successfully rendered the adjustment layer and I don't remember changing anything major. Shots in the dark?
View 3 Replies View Relatedi have the imac 27 680mx 32gb ram,when i render on cs6 takes very long time, the first one takes 8-10mins,when i do the second time its very fast 30seconds
View 7 Replies View RelatedIt seams that when editing in After Effects (CS6) despite doing everything i've been told to do i get no audio when editing video clips imported from my digital camcorder. The only audio it seams i can hear in it is an actual song or audio file (MP3) and the worst part is when i render out the video after adding my effect even when i check the audio output box in the Output Module, i keep most render settings the way they are? but i have tried everything that i have seen suggested but nothing seams to work and no matter what i do i cannon manage to get any audio from my finished products unless there is an actual song in it.I must also add that in the Output Module i have tried many formats such as MPEG4, H.26, AVI, WAV, Windows Media and many others, none of them make a difference to the audio, only the quality of the video.
View 4 Replies View Related However my machine is not using all cores and is rendering very slowly.I have a mac pro running os 10.9, 2 x 2.4 GHz 6-Core, 64GB RAM, and my graphics card is an NVidia Quadro 4000 with Cuda version 5.5.28. I've looked for updates, but everything seems to be current. Not sure what I should do?
Fast Draft:Available Texture Memory:1515.00 MBRay-tracing:GPU
OpenGL
Vendor:NVIDIA CorporationDevice:NVIDIA Quadro 4000 OpenGL EngineVersion:2.1 NVIDIA-8.18.22 310.40.05f01Total Memory:2.00 GBShader Model:-CUDA
Driver Version:5.5Devices:1 (Quadro 4000)Current Usable Memory:691.00 MB (at application launch)Maximum Usable Memory:2.00 GB
Today I was just about finished editing a video on CS6.What happens is that while RAM previewing at some point during the loading of the preview it will stop loading, It will then proceed to play the ram preview on loop and when I press a button to stop it a small box pops up in the centre of my screen and the ram preview bar to show what has loaded (the one which shows green for parts that are loaded and blue for cached) turns black and sometimes other parts of after effects turn black. This has happened before and I fixed it by uninstalling and reinstalling After Effects about 6 times. I would do that this time though I would like to know the cause of it and any possible fixes as it is quite irritating. Another thing that may be happening is the RAM usage is slowly filling as I render. This has happened before on my laptop and I did not manage to fix it though it was not related to the first issue that time. The last time when it happened on my laptop the RAM usage eventually filled up to 100% and it would no longer render. I am not sure if it is happening this time as it is still currently rendering though I will update the thread if it does. Finally my render is going very slowly, I am not sure if this issue is realted to any of the above or if it is just the effects I am using though. My memory and multiprocessing settings are using 6 cores of 7 with 2 GB of ram allocated to each with multiprocessing on. My ram allocated for other programs is 6GB. To fix these Issues so far I have tried clearing the cache, purging the memory and image cache, restarting my computer and reinstalling after effects.
View 1 Replies View Related